Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2408.12903 · Nature Nanotechnology

Time-resolved sensing of electromagnetic fields with single-electron interferometry

Hugo Bartolomei, Elric Frigerio, M. Ruelle, Giacomo Rebora, Yuan Jin, U. Gennser, A. Cavanna, Emmanuel Baudin, Jean‐Marc Berroir, Inès Safi A, Pascal Degiovanni, Gerbold C. Ménard, Gwendal Fève

Published Mar 17, 2025• 17 citations
arXivHTMLPDF

Abstract

Characterizing quantum states of the electromagnetic field at microwave frequencies requires fast and sensitive detectors that can simultaneously probe the field's time-dependent amplitude and its quantum fluctuations. So far, this has been achieved by using either homodyne detection or fast digitizers. Both methods rely on the extraction of microwave radiation through an amplification chain towards the detector placed at room temperature, thereby limiting the time resolution to the ~10-GHz bandwidth of the measurement chain. Additionally, the coupling of high-impedance samples to the 50-Ω measurement chain is very weak, setting strong limitations on the detection sensitivity. In this work, we demonstrate an on-chip quantum sensor that exploits the phase of a single-electron wavefunction, measured in an electronic Fabry-Pérot interferometer, to detect the amplitude of a classical time-dependent electric field. The interferometer is implemented in a GaAs/AlGaAs quantum Hall conductor. The time resolution, limited by the temporal width of the electronic wavepacket, is ~35 ps. The interferometry technique provides a voltage resolution of ~50 μV, corresponding to a few microwave photons. Importantly, our detector measures both phase and contrast of the interference pattern. The latter opens the way to the detection of non-classical electromagnetic fields, such as squeezed or Fock states.

DOI
10.1038/s41565-025-01888-2

Related papers

Quantum Sensing of Time-Dependent Electromagnetic Fields with Single-Electron Excitations

Hubert Souquet-Basiège, Benjamin Roussel, Giacomo Rebora +4 more

In this study, we investigate the potential of electronic interferometers for probing the quantum state of electromagnetic radiation on a chip at subnanosecond timescales. We propose to use single-electron excitations propagating within an electronic Mach-Zehnder interferometer in the Aharonov-Bohm-dominated regime. We discuss how information about the quantum state of the electromagnetic radiation is encoded into the interference contribution to the average outgoing electrical current. By investigating squeezed radiation and single-edge magnetoplasmons probed by leviton pulses in a realistic setup, we show that single-electron interferometers have the potential to probe quantum radiation in the time domain with subnanosecond to picosecond time resolution. Our research could have significant implications for probing the fundamental properties of light in the microwave to terahertz domains at extremely short timescales.

arXiv:2405.05796•Physical Review X•Jun 3, 2025•6 citations

Electro-optic interface for ultrasensitive intracavity electric field measurements at microwave and terahertz frequencies

Ileana-Cristina Benea-Chelmus, Yannick Salamin, Francesca Fabiana Settembrini +6 more

Electro-optic quantum coherent interfaces map the amplitude and phase of a quantum signal directly to the phase or intensity of a probe beam. At terahertz frequencies, a fundamental challenge is not only to sense such weak signals (due to a weak coupling with a probe in the near-infrared) but also to resolve them in the time domain. Cavity confinement of both light fields can increase the interaction and achieve strong coupling. Using this approach, current realizations are limited to low microwave frequencies. Alternatively, in bulk crystals, electro-optic sampling was shown to reach quantum-level sensitivity of terahertz waves. Yet, the coupling strength was extremely weak. Here, we propose an on-chip architecture that concomitantly provides subcycle temporal resolution and an extreme sensitivity to sense terahertz intracavity fields below 20 V/m. We use guided femtosecond pulses in the near-infrared and a confinement of the terahertz wave to a volume of V T H z ∼ 10 − 9 ( λ T H z / 2 ) 3 in combination with ultraperformant organic molecules ( r 33 = 170 p m / V ) and accomplish a record-high single-photon electro-optic coupling rate of g e o = 2 π × 0.043 G H z , 10,000 times higher than in recent reports of sensing vacuum field fluctuations in bulk media. Via homodyne detection implemented directly on chip, the interaction results into an intensity modulation of the femtosecond pulses. The single-photon cooperativity is C 0 = 1.6 × 10 − 8 , and the multiphoton cooperativity is C = 0.002 at room temperature. We show > 70 d B dynamic range in intensity at 500 ms integration under irradiation with a weak coherent terahertz field. Similar devices could be employed in future measurements of quantum states in the terahertz at the standard quantum limit, or for entanglement of subsystems on subcycle temporal scales, such as terahertz and near-infrared quantum bits.

Optica•Apr 20, 2020•67 citations

Vaihemoduloitujen fotoneiden bolometrinen mittaus

Lukkari, Santtu

Propagating microwave photons have gained great interest due to their potential being used in the applications of the quantum technology, such as communication and sensing. The use of propagating microwave photons as information carriers requires methodology that is able to characterize the incoming photon signals. Since the signal could consist of only a few photons, the signal detection is truly a challenging task. Amplifying a weak microwave signal to room temperature would cause excessive noise and cover the signal. Previously, amplification-free signals have been measured with qubit-based photon detection, which relies on excitation of the qubit. This method is limited by a narrow bandwidth, since the qubit can absorb only a few discrete energies. However, a bolometer utilizing resistive absorption of the photons offers a broad bandwidth and enables the measurement without amplification. This thesis examines the use of bolometer as a phase and amplitude sensitive detector for propagating microwave signals. The phase sensitivity of the bolometer is enabled by homodyne detection, where the measurement signal is combined with a strong local oscillator signal. The combining of these signals is implemented with a beam splitter. Amplitude sensitivity is studied by repeating the measurement with multiple signal powers, and phase sensitivity is studied using a phase modulated measurement signal with different modulation amplitudes. The data is extracted from the bolometer by assuming a linear dependency between the average resonance frequency and the average photon number. Similarly, a linear dependency is assumed between the variances. This thesis demonstrates that the bolometer is able to detect changes in the measurement signal power and phase by measuring the average photon number and variance. The average photon number and variance oscillate, meaning that the phase modulation is detected. The oscillation amplitudes increase as a function of power indicating the amplitude sensitivity. A strong local oscillator signal allows the detection of weak signals without amplification, and thus the measurement can be conducted with minimal added noise. These results together show, that the bolometer is a versatile microwave detector and a promising candidate for quantum technology applications in the microwave region.

•Dec 2, 2025•0 citations

Phase dependent Hong-Ou-Mandel Interferometry as a Phase Sensor

Kayla McArthur

The use of quantum properties of light has allowed researchers to create technologies that can outperform classical setups. In quantum imaging and sensing, the cross-correlation of photon pairs enables precise time synchronization of photons reaching the photodetectors, effectively suppressing environmental noise, and improving measurement accuracy. Building on this concept, we theoretically introduce and experimentally explore phase-dependent Hong-Ou-Mandel (HOM) interferometry. This technique employs phase-shifted indistinguishable photon pairs in a modified HOM interferometer for detection of microwave signals. We demonstrate that applying a phase shift to photon pairs via electro-optic modulation in the modified HOM interferometer causes a change in the middle interference structure, which can be used to gain information about the microwave signal causing the phase shift. In this work, we explore the quantization of the electromagnetic field, as well as nonclassical states of light. Phase estimation and metrics in quantum metrology are explored to gain insight into the benefits of utilizing these nonclassical states. An understanding of optical interferometry is built by investigating different types of interferometers, before introducing the HOM interferometer. Theory for the modified HOM interferometer is introduced, followed by an exploration of the interference structure that arises from the different path lengths in the modified system. We gathered data experimentally, showing the addition of a phase through electro-optic modulators (EOMs) leads to a change in the height of the structure. From this data, we calculate the Fisher information (FI), and find a maximum sensitivity of 58 mradians for phase difference, and 25 mV for amplitude. Additionally, we theoretically explore the FI to find optimal parameters to increase the system's sensitivity.

•Sep 10, 2026•0 citations

Efficient Microwave Photon-to-Electron Conversion in a High-Impedance Quantum Circuit

Ognjen Stanisavljević, Jean-Côme Philippe, Julien Gabelli +3 more

We demonstrate a single-photon detector operating in the microwave domain, based on photoassisted quasiparticle tunneling events that poison a superconducting island. The detection relies on continuously monitoring the island's charge parity using microwave reflectometry. This scheme achieves 10% detection efficiency with sub 50 ns time resolution and short dead time (∼1 μs), for microwave photons at 10 GHz. The detector features three junctions connected to a superconducting island, which together carry out photoelectric conversion and charge readout. The enhanced light-matter coupling, crucial to photon-to-quasiparticle conversion, is provided by a granular aluminum-based high-impedance microwave resonator. The time-resolved detection of itinerant microwave photon opens up new perspectives in quantum sensing, microwave quantum optics, and mesoscopic physics.

arXiv:2312.14065•Physical Review Letters•Aug 16, 2024•17 citations

Atom-based sensing of microwave electric fields using highly excited atoms: mechanisms affecting sensitivity

James P. Shaffer, Harald Kübler, James Keaveney +5 more

We have shown that Rydberg states can be used for high-sensitivity, absolute sensing of microwave (MW) electric fields. We achieved a sensitivity of 3 μVcm-1Hz-1/2 for two read-out strategies. Depending on the spectral resolution of the read-out, either the MW induced transmission line frequency splitting, the Autler-Townes regime, or a change in the on-resonant absorption, the amplitude regime, can be used to determine the MW electric field. Results using a Mach-Zehnder interferometer and frequency modulated spectroscopy both achieve similar photon shot noise limited sensitivity. In addition, we have also explored amplitude modulation and the displacement of a probe laser beam due to index of refraction changes in a prism shaped vapor cell. These latter methods were not able to achieve photon shot noise limited performance. Fundamental limits to the sensitivity of the Rydberg atom-based MW electric field sensing have been addressed, but it is important to clarify the differences between noise in different parts or subsystems of the sensor. Shot noise in the probe laser usually dominates the projection noise of the atoms participating in the measurement of the MW electric field because of the desire to operate at low effective Rydberg atom densities in order to avoid collisional dephasing and ionization.

Optical and Quantum Sensing and Precision Metrology II•Mar 1, 2019•9 citations
Characterizing quantum states of the electromagnetic field at microwave frequencies requires fast and sensitive detectors that can simultaneously probe the field's time-dependent amplitude and its quantum fluctuations. So far, this has been achieved by using either homodyne detection or fast digitizers. Both methods rely on the extraction of microwave radiation through an amplification chain towards the detector placed at room temperature, thereby limiting the time resolution to the ~10-GHz bandwidth of the measurement chain. Additionally, the coupling of high-impedance samples to the 50-Ω measurement chain is very weak, setting strong limitations on the detection sensitivity. In this work, we demonstrate an on-chip quantum sensor that exploits the phase of a single-electron wavefunction, measured in an electronic Fabry-Pérot interferometer, to detect the amplitude of a classical time-dependent electric field. The interferometer is implemented in a GaAs/AlGaAs quantum Hall conductor. The time resolution, limited by the temporal width of the electronic wavepacket, is ~35 ps. The interferometry technique provides a voltage resolution of ~50 μV, corresponding to a few microwave photons. Importantly, our detector measures both phase and contrast of the interference pattern. The latter opens the way to the detection of non-classical electromagnetic fields, such as squeezed or Fock states.
In this study, we investigate the potential of electronic interferometers for probing the quantum state of electromagnetic radiation on a chip at subnanosecond timescales. We propose to use single-electron excitations propagating within an electronic Mach-Zehnder interferometer in the Aharonov-Bohm-dominated regime. We discuss how information about the quantum state of the electromagnetic radiation is encoded into the interference contribution to the average outgoing electrical current. By investigating squeezed radiation and single-edge magnetoplasmons probed by leviton pulses in a realistic setup, we show that single-electron interferometers have the potential to probe quantum radiation in the time domain with subnanosecond to picosecond time resolution. Our research could have significant implications for probing the fundamental properties of light in the microwave to terahertz domains at extremely short timescales.
Electro-optic quantum coherent interfaces map the amplitude and phase of a quantum signal directly to the phase or intensity of a probe beam. At terahertz frequencies, a fundamental challenge is not only to sense such weak signals (due to a weak coupling with a probe in the near-infrared) but also to resolve them in the time domain. Cavity confinement of both light fields can increase the interaction and achieve strong coupling. Using this approach, current realizations are limited to low microwave frequencies. Alternatively, in bulk crystals, electro-optic sampling was shown to reach quantum-level sensitivity of terahertz waves. Yet, the coupling strength was extremely weak. Here, we propose an on-chip architecture that concomitantly provides subcycle temporal resolution and an extreme sensitivity to sense terahertz intracavity fields below 20 V/m. We use guided femtosecond pulses in the near-infrared and a confinement of the terahertz wave to a volume of V T H z ∼ 10 − 9 ( λ T H z / 2 ) 3 in combination with ultraperformant organic molecules ( r 33 = 170 p m / V ) and accomplish a record-high single-photon electro-optic coupling rate of g e o = 2 π × 0.043 G H z , 10,000 times higher than in recent reports of sensing vacuum field fluctuations in bulk media. Via homodyne detection implemented directly on chip, the interaction results into an intensity modulation of the femtosecond pulses. The single-photon cooperativity is C 0 = 1.6 × 10 − 8 , and the multiphoton cooperativity is C = 0.002 at room temperature. We show > 70 d B dynamic range in intensity at 500 ms integration under irradiation with a weak coherent terahertz field. Similar devices could be employed in future measurements of quantum states in the terahertz at the standard quantum limit, or for entanglement of subsystems on subcycle temporal scales, such as terahertz and near-infrared quantum bits.
Propagating microwave photons have gained great interest due to their potential being used in the applications of the quantum technology, such as communication and sensing. The use of propagating microwave photons as information carriers requires methodology that is able to characterize the incoming photon signals. Since the signal could consist of only a few photons, the signal detection is truly a challenging task. Amplifying a weak microwave signal to room temperature would cause excessive noise and cover the signal. Previously, amplification-free signals have been measured with qubit-based photon detection, which relies on excitation of the qubit. This method is limited by a narrow bandwidth, since the qubit can absorb only a few discrete energies. However, a bolometer utilizing resistive absorption of the photons offers a broad bandwidth and enables the measurement without amplification. This thesis examines the use of bolometer as a phase and amplitude sensitive detector for propagating microwave signals. The phase sensitivity of the bolometer is enabled by homodyne detection, where the measurement signal is combined with a strong local oscillator signal. The combining of these signals is implemented with a beam splitter. Amplitude sensitivity is studied by repeating the measurement with multiple signal powers, and phase sensitivity is studied using a phase modulated measurement signal with different modulation amplitudes. The data is extracted from the bolometer by assuming a linear dependency between the average resonance frequency and the average photon number. Similarly, a linear dependency is assumed between the variances. This thesis demonstrates that the bolometer is able to detect changes in the measurement signal power and phase by measuring the average photon number and variance. The average photon number and variance oscillate, meaning that the phase modulation is detected. The oscillation amplitudes increase as a function of power indicating the amplitude sensitivity. A strong local oscillator signal allows the detection of weak signals without amplification, and thus the measurement can be conducted with minimal added noise. These results together show, that the bolometer is a versatile microwave detector and a promising candidate for quantum technology applications in the microwave region.
The use of quantum properties of light has allowed researchers to create technologies that can outperform classical setups. In quantum imaging and sensing, the cross-correlation of photon pairs enables precise time synchronization of photons reaching the photodetectors, effectively suppressing environmental noise, and improving measurement accuracy. Building on this concept, we theoretically introduce and experimentally explore phase-dependent Hong-Ou-Mandel (HOM) interferometry. This technique employs phase-shifted indistinguishable photon pairs in a modified HOM interferometer for detection of microwave signals. We demonstrate that applying a phase shift to photon pairs via electro-optic modulation in the modified HOM interferometer causes a change in the middle interference structure, which can be used to gain information about the microwave signal causing the phase shift. In this work, we explore the quantization of the electromagnetic field, as well as nonclassical states of light. Phase estimation and metrics in quantum metrology are explored to gain insight into the benefits of utilizing these nonclassical states. An understanding of optical interferometry is built by investigating different types of interferometers, before introducing the HOM interferometer. Theory for the modified HOM interferometer is introduced, followed by an exploration of the interference structure that arises from the different path lengths in the modified system. We gathered data experimentally, showing the addition of a phase through electro-optic modulators (EOMs) leads to a change in the height of the structure. From this data, we calculate the Fisher information (FI), and find a maximum sensitivity of 58 mradians for phase difference, and 25 mV for amplitude. Additionally, we theoretically explore the FI to find optimal parameters to increase the system's sensitivity.
We demonstrate a single-photon detector operating in the microwave domain, based on photoassisted quasiparticle tunneling events that poison a superconducting island. The detection relies on continuously monitoring the island's charge parity using microwave reflectometry. This scheme achieves 10% detection efficiency with sub 50 ns time resolution and short dead time (∼1 μs), for microwave photons at 10 GHz. The detector features three junctions connected to a superconducting island, which together carry out photoelectric conversion and charge readout. The enhanced light-matter coupling, crucial to photon-to-quasiparticle conversion, is provided by a granular aluminum-based high-impedance microwave resonator. The time-resolved detection of itinerant microwave photon opens up new perspectives in quantum sensing, microwave quantum optics, and mesoscopic physics.
We have shown that Rydberg states can be used for high-sensitivity, absolute sensing of microwave (MW) electric fields. We achieved a sensitivity of 3 μVcm-1Hz-1/2 for two read-out strategies. Depending on the spectral resolution of the read-out, either the MW induced transmission line frequency splitting, the Autler-Townes regime, or a change in the on-resonant absorption, the amplitude regime, can be used to determine the MW electric field. Results using a Mach-Zehnder interferometer and frequency modulated spectroscopy both achieve similar photon shot noise limited sensitivity. In addition, we have also explored amplitude modulation and the displacement of a probe laser beam due to index of refraction changes in a prism shaped vapor cell. These latter methods were not able to achieve photon shot noise limited performance. Fundamental limits to the sensitivity of the Rydberg atom-based MW electric field sensing have been addressed, but it is important to clarify the differences between noise in different parts or subsystems of the sensor. Shot noise in the probe laser usually dominates the projection noise of the atoms participating in the measurement of the MW electric field because of the desire to operate at low effective Rydberg atom densities in order to avoid collisional dephasing and ionization.