Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2408.12471 · Physical Review Applied

Low-power microstructured atomic oven for alkaline-earth-like elements

Julian Pick, J. Voß, Simon Hirt, J. Kruse, Tobias Leopold, R. Schwarz, Carsten Klempt

Published Jan 8, 2025• 7 citations
arXivHTMLPDF

Abstract

Alkaline-earth-like elements play pivotal roles in advanced quantum sensing technologies, notably optical clocks, with unprecedented precision achieved in recent years. Despite remarkable progress, current optical-lattice clocks still face challenges in meeting the demanding size, weight, and power consumption constraints essential for space applications. Conventional atom sources, such as ovens or dispensers, require substantial heating power, which makes up a significant fraction of the overall power consumption of the system. Addressing this challenge, we present a microstructured atomic oven based on fused silica, designed for miniaturization and low-power operation. We characterize the oven by loading a magneto-optical trap with Yb evaporated from the oven and demonstrate operation with a loading rate above 10 8 atoms / s for heating powers below 250 mW.

DOI
10.1103/physrevapplied.23.014020

Related papers

Low-power microstructured atomic oven for alkaline-earth-like elements

Schwarz, Roman, Pick, Julian, Kruse, Jens +4 more

The development of miniaturized atomic ovens for quantum sensors is a key advancement in compact optical clocks for portable and space applications. Our novel oven for alkaline-earth-like elements, made from microstructured fused silica, offers low power consumption and sufficient reservoir lifetime. It demonstrates high efficiency atom evaporation below 0.3 W of heating power and achieves loading rates in a magneto-optical trap (MOT) of up to 10^9 atoms/s. The compact design eliminates the need for large deceleration devices and can be integrated into quantum systems with stringent size, weight, and power (SWaP) requirements. Our innovation is critical for advancing quantum technologies in precision metrology to space-based platforms.

•May 15, 2025•0 citations

Compact atom sources for optical frequency standards

Julian Pick

Atomic clocks are crucial for precise time dissemination, supporting industrial applications for navigation, telecommunication, the financial system, and the energy industry by ensuring accurate timekeeping and synchronization. At present, the best atomic clocks are based on optical transitions. Optical lattice clocks based on Yb or Sr achieve fractional frequency uncertainties in the low 10^(-18) regime. This remarkable accuracy allows resolving the gravitational redshift on the centimeter scale. This progress has driven the development of compact transportable optical lattice clocks, which are crucial for field- or even space applications. Especially for space operation, there is a critical need to minimize size, weight and power consumption of key components, particularly the source of laser-cooled atoms. Conventional atom sources for optical lattice clocks consist of an atomic oven with a high power consumption and a six-beam magneto-optical trap (MOT) that requires a large and complex optical setup. This thesis addresses the technical challenges associated with the development of compact sources of laser-cooled alkaline-earth-like atoms by demonstrating a miniaturized atomic oven and a miniaturized MOT for Yb and Sr. The MOT generation is tested with three types of in-vacuum optical elements that generate all the required laser beams for three-dimensional trapping and cooling with only one single input beam. A quasi-monolithic aluminum structure generating a conventional MOT beam geometry that is called pyramid reflector is compared to a quasi-planar optical element called Fresnel reflector. Both are characterized and compared using the same high-flux Yb source. Particularly, two-stage cooling of a fermionic alkaline-earth-like atom in a non-conventional MOT configuration is performed for the first time, demonstrating the applicability of planar MOT optics in optical lattice clocks. Furthermore, a planar diffraction grating is combined with the miniaturized atomic oven inside a highly compact vacuum chamber. The atomic oven is based on a circular fused silica chip and is tested by loading an Yb MOT generated with the pyramid reflector and a Sr MOT generated with the diffraction grating. It requires less than 250 mW of electrical heating power to generate a MOT loading rate above 10^8 atoms/s with the pyramid reflector. The presented components form a compact source of laser-cooled Yb or Sr atoms, and, when combined with a compact optical lattice setup, will serve as the basic building blocks of a future transportable optical lattice clock.

•Jan 1, 2026•0 citations

Miniaturized vacuum package for magneto-optical trapping of strontium

Julian Pick, Eric Henker, Florian Löwinger +17 more

Quantum sensors, like optical lattice clocks, undergo a continuous development from lab-based towards mobile systems. A key aspect in the miniaturization of the experimental setups is the development of compact atom sources. Conventional atom sources for alkaline-earth-like elements consist of a high-power oven and a six-beam magneto-optical trap (MOT) inside of vacuum chamber with extensive flanges, viewports and electrical feedthroughs. Here we present a highly compact vacuum package utilizing key technologies for future quantum sensor systems: A chip-based low-power atomic oven, a planar grating MOT chip, and a miniaturized vacuum pump all held inside an additively manufactured titanium vacuum chamber, featuring custom-sized vacuum flanges. In this miniaturized setup, spanning a volume of only 750 ml, we trap up to $10^5$ Sr atoms in a MOT, requiring an oven heating power below 1 W.

arXiv:2609.09846•Sep 9, 2026•0 citations

Miniaturized setups for magneto-optical trapping of ytterbium and strontium

Julian Pick, Julia Voß, Florian Löwinger +6 more

Optical lattice clocks based on ytterbium (Yb) and strontium (Sr) are emerging as key technologies in precision timekeeping and metrology. Recent advancements in miniaturization and transportability are making them increasingly accessible for applications outside traditional laboratory settings. However, the degree of miniaturization is limited by the atomic source that is used to provide laser-cooled atoms for the clock spectroscopy. Conventional atomic sources for optical lattice clocks consist of a high-power oven and a magneto-optical trap (MOT) that requires six incident laser beams for three-dimensional trapping and cooling. Here, we present technologies that allow a significant miniaturization of the required experimental setups to realize a MOT for Yb and Sr. These are a chip-based microstructured atomic oven and in-vacuum optical elements that require only a single incident laser beam to generate all of the required beams for three-dimensional trapping and cooling. The oven was manufactured with LIDE® (laser induced deep etching). It was paired with an aluminum pyramid reflector to load Yb atoms into a MOT. The oven was placed directly at the outside of the reflector, forming a compact setup that is used for atom evaporation and direct trapping and cooling. In this configuration, MOT loading rates above 10^8 atoms/s were measured for oven heating powers below 250 mW. Furthermore, the microstructured oven was paired with a grating MOT chip inside a highly compact vacuum chamber. The chamber was additively manufactured from titanium and the assembled setup spans a volume of less than 750 ml. In this setup, up to 10^5 Sr atoms were trapped in the MOT.

•Jan 1, 2026•0 citations

Direct loading of Yb atoms into a 3D magneto-optical trap from a dispenser atomic source

Junia Nomura, Tomohiko Momma, Yuki Kojima +4 more

The realization of cold atoms using a compact and low-power-consumption experimental setup is indispensable for cold atom experiments, including optical clocks and quantum simulations. We demonstrate the direct loading of Yb atoms into a 3D magneto-optical trap (MOT) from a dispenser atomic source without using a Zeeman slower. The power consumption of the dispenser was ∼3 W. Spectroscopy of the atomic beam from the dispenser on the 6s2 1S0–6s6p 1P1 Yb transition at 399 nm shows that the flux of the atomic beam reaches 1.4 × 1013 s−1 cm−2. We can load up to 4.1 × 107 atoms into the MOT with slowing and trapping laser powers of 20.3 and 35.0 mW, respectively. The realized cold atom system is reliable and can be adapted for experiments on alkaline earth and other alkaline earth-like atoms.

AIP Advances•Feb 1, 2023•6 citations

Field deployable atomics package for an optical lattice clock

Y. B. Kale, Alok K. Singh, Markus Gellesch +5 more

Abstract An atomics package is the heart of any atom based quantum sensing device. Here we report on the realisation of a field deployable atomics package for alkaline earth atoms, e.g. Sr or Yb. In terms of size (∼121 L), weight (<75 kg) and power (∼320 W), it is the smallest package to date which is designed to load Sr atoms into an optical lattice. It consists of an ultra-high vacuum assembly (<4 L), lasers, magnetic field coils & optics required for cooling & trapping as well as a module for imaging & detection. The package can routinely produce ultra cold and dense samples of 1.6 × 105 88Sr atoms trapped in a 1D optical lattice in less than a second. Its robustness has been demonstrated by conducting two transportation campaigns within out-of-the-lab environments. This advancement will have impact not only on transportable optical clock development but also will influence the wider areas of quantum science and technologies, particularly requiring field deployable cold atom based quantum sensors.

Quantum Science and Technology•Jun 22, 2022•18 citations
Alkaline-earth-like elements play pivotal roles in advanced quantum sensing technologies, notably optical clocks, with unprecedented precision achieved in recent years. Despite remarkable progress, current optical-lattice clocks still face challenges in meeting the demanding size, weight, and power consumption constraints essential for space applications. Conventional atom sources, such as ovens or dispensers, require substantial heating power, which makes up a significant fraction of the overall power consumption of the system. Addressing this challenge, we present a microstructured atomic oven based on fused silica, designed for miniaturization and low-power operation. We characterize the oven by loading a magneto-optical trap with Yb evaporated from the oven and demonstrate operation with a loading rate above 10 8 atoms / s for heating powers below 250 mW.
The development of miniaturized atomic ovens for quantum sensors is a key advancement in compact optical clocks for portable and space applications. Our novel oven for alkaline-earth-like elements, made from microstructured fused silica, offers low power consumption and sufficient reservoir lifetime. It demonstrates high efficiency atom evaporation below 0.3 W of heating power and achieves loading rates in a magneto-optical trap (MOT) of up to 10^9 atoms/s. The compact design eliminates the need for large deceleration devices and can be integrated into quantum systems with stringent size, weight, and power (SWaP) requirements. Our innovation is critical for advancing quantum technologies in precision metrology to space-based platforms.
Atomic clocks are crucial for precise time dissemination, supporting industrial applications for navigation, telecommunication, the financial system, and the energy industry by ensuring accurate timekeeping and synchronization. At present, the best atomic clocks are based on optical transitions. Optical lattice clocks based on Yb or Sr achieve fractional frequency uncertainties in the low 10^(-18) regime. This remarkable accuracy allows resolving the gravitational redshift on the centimeter scale. This progress has driven the development of compact transportable optical lattice clocks, which are crucial for field- or even space applications. Especially for space operation, there is a critical need to minimize size, weight and power consumption of key components, particularly the source of laser-cooled atoms. Conventional atom sources for optical lattice clocks consist of an atomic oven with a high power consumption and a six-beam magneto-optical trap (MOT) that requires a large and complex optical setup. This thesis addresses the technical challenges associated with the development of compact sources of laser-cooled alkaline-earth-like atoms by demonstrating a miniaturized atomic oven and a miniaturized MOT for Yb and Sr. The MOT generation is tested with three types of in-vacuum optical elements that generate all the required laser beams for three-dimensional trapping and cooling with only one single input beam. A quasi-monolithic aluminum structure generating a conventional MOT beam geometry that is called pyramid reflector is compared to a quasi-planar optical element called Fresnel reflector. Both are characterized and compared using the same high-flux Yb source. Particularly, two-stage cooling of a fermionic alkaline-earth-like atom in a non-conventional MOT configuration is performed for the first time, demonstrating the applicability of planar MOT optics in optical lattice clocks. Furthermore, a planar diffraction grating is combined with the miniaturized atomic oven inside a highly compact vacuum chamber. The atomic oven is based on a circular fused silica chip and is tested by loading an Yb MOT generated with the pyramid reflector and a Sr MOT generated with the diffraction grating. It requires less than 250 mW of electrical heating power to generate a MOT loading rate above 10^8 atoms/s with the pyramid reflector. The presented components form a compact source of laser-cooled Yb or Sr atoms, and, when combined with a compact optical lattice setup, will serve as the basic building blocks of a future transportable optical lattice clock.
Quantum sensors, like optical lattice clocks, undergo a continuous development from lab-based towards mobile systems. A key aspect in the miniaturization of the experimental setups is the development of compact atom sources. Conventional atom sources for alkaline-earth-like elements consist of a high-power oven and a six-beam magneto-optical trap (MOT) inside of vacuum chamber with extensive flanges, viewports and electrical feedthroughs. Here we present a highly compact vacuum package utilizing key technologies for future quantum sensor systems: A chip-based low-power atomic oven, a planar grating MOT chip, and a miniaturized vacuum pump all held inside an additively manufactured titanium vacuum chamber, featuring custom-sized vacuum flanges. In this miniaturized setup, spanning a volume of only 750 ml, we trap up to 10510^5105 Sr atoms in a MOT, requiring an oven heating power below 1 W.
Optical lattice clocks based on ytterbium (Yb) and strontium (Sr) are emerging as key technologies in precision timekeeping and metrology. Recent advancements in miniaturization and transportability are making them increasingly accessible for applications outside traditional laboratory settings. However, the degree of miniaturization is limited by the atomic source that is used to provide laser-cooled atoms for the clock spectroscopy. Conventional atomic sources for optical lattice clocks consist of a high-power oven and a magneto-optical trap (MOT) that requires six incident laser beams for three-dimensional trapping and cooling. Here, we present technologies that allow a significant miniaturization of the required experimental setups to realize a MOT for Yb and Sr. These are a chip-based microstructured atomic oven and in-vacuum optical elements that require only a single incident laser beam to generate all of the required beams for three-dimensional trapping and cooling. The oven was manufactured with LIDE® (laser induced deep etching). It was paired with an aluminum pyramid reflector to load Yb atoms into a MOT. The oven was placed directly at the outside of the reflector, forming a compact setup that is used for atom evaporation and direct trapping and cooling. In this configuration, MOT loading rates above 10^8 atoms/s were measured for oven heating powers below 250 mW. Furthermore, the microstructured oven was paired with a grating MOT chip inside a highly compact vacuum chamber. The chamber was additively manufactured from titanium and the assembled setup spans a volume of less than 750 ml. In this setup, up to 10^5 Sr atoms were trapped in the MOT.
The realization of cold atoms using a compact and low-power-consumption experimental setup is indispensable for cold atom experiments, including optical clocks and quantum simulations. We demonstrate the direct loading of Yb atoms into a 3D magneto-optical trap (MOT) from a dispenser atomic source without using a Zeeman slower. The power consumption of the dispenser was ∼3 W. Spectroscopy of the atomic beam from the dispenser on the 6s2 1S0–6s6p 1P1 Yb transition at 399 nm shows that the flux of the atomic beam reaches 1.4 × 1013 s−1 cm−2. We can load up to 4.1 × 107 atoms into the MOT with slowing and trapping laser powers of 20.3 and 35.0 mW, respectively. The realized cold atom system is reliable and can be adapted for experiments on alkaline earth and other alkaline earth-like atoms.
Abstract An atomics package is the heart of any atom based quantum sensing device. Here we report on the realisation of a field deployable atomics package for alkaline earth atoms, e.g. Sr or Yb. In terms of size (∼121 L), weight (<75 kg) and power (∼320 W), it is the smallest package to date which is designed to load Sr atoms into an optical lattice. It consists of an ultra-high vacuum assembly (<4 L), lasers, magnetic field coils & optics required for cooling & trapping as well as a module for imaging & detection. The package can routinely produce ultra cold and dense samples of 1.6 × 105 88Sr atoms trapped in a 1D optical lattice in less than a second. Its robustness has been demonstrated by conducting two transportation campaigns within out-of-the-lab environments. This advancement will have impact not only on transportable optical clock development but also will influence the wider areas of quantum science and technologies, particularly requiring field deployable cold atom based quantum sensors.