Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2408.07187 · Optics Express

Micro-integrated crossed-beam optical dipole trap system with long-term alignment stability for mobile atomic quantum technologies

Marc Christ, Oliver Anton, Conrad Zimmermann, Victoria Henderson, Elisa Da Ros, Markus Krutzik

Published Sep 25, 2024• 3 citations
arXivHTMLPDF

Abstract

Quantum technologies extensively use laser light for state preparation, manipulation, and readout. For field applications, these systems must be robust and compact, driving the need for miniaturized and highly stable optical setups and system integration. In this work, we present a micro-integrated crossed-beam optical dipole trap setup, the µXODT, designed for trapping and cooling 87 Rb. This fiber-coupled setup operates at 1064 nm wavelength with up to 2.5 W optical power and realizes a free-space crossed beam geometry. The µXODT precisely overlaps two focused beams ( w 0 ≈ 33 µm) at their waists in a 45° crossing angle, achieving a position difference of ≤3.4 µm and a 0.998 power ratio between both beams with long-term stability. We describe the design and assembly process in detail, along with optical and thermal tests with temperatures of up to 65 °C. The system’s volume of 25 ml represents a reduction of more than two orders of magnitude compared to typically used macroscopic setups while demonstrating exceptional mechanical robustness and thermal stability. The µXODT is integrated with an 87 Rb 3D MOT setup, trapping 3 × 10 5 atoms from a laser-cooled atomic cloud, and has shown no signs of degradation after two years of operation.

DOI
10.1364/oe.534888

Related papers

Micro-integrated optical systems and qualification of adhesive integration technologies for cold atomic quantum sensors

Marc Christ, Anne Stiekel, Christoph Stölmacker +4 more

Cold atom based quantum sensors require robust and miniaturized optical systems for applications on mobile platforms. A micro-integrated optical system (volume ∼25 mL) for trapping and manipulation of neutral atoms is presented. This setup focuses and precisely overlaps two high power laser beams (1064 nm, up to 2W total, wR = 34 µm) launched via a single-mode, polarization maintaining optical fiber, thereby realizing a crossed beam optical dipole trap (ODT). Adhesive bonding is qualified in application relevant geometries and material systems of micro-integrated optical systems for application on mobile platforms or space. Fused silica test blocks (bond area 2 × 4 mm2 ) are bonded with four different adhesives on silicon wafers. Theses samples are aged by thermal cycling (up to −55 °C to 150 °C) and/or gamma-radiation (10 000 mSv) and subsequently the bond strength is evaluated by die shear testing according to MIL-STD-883L. The influence of the environmental aging on the bond strength is presented, the failure mode and the influence of fillets discussed. In addition, the effects of plasma cleaning on the bond strength in this geometry is presented.

International Conference on Space Optics (ICSO)•Jul 12, 2023•2 citations

Integrated atomic quantum technologies in demanding environments: development and qualification of miniaturized optical setups and integration technologies for UHV and space operation

Marc Christ, Alexander Kassner, Robert Smol +6 more

Employing compact quantum sensors in field or in space (e.g., small satellites) implies demanding requirements on components and integration technologies. Within our work on integrated sensors, we develop miniaturized, ultra-stable optical setups for optical cooling and trapping of cold atomic gases. Besides challenging demands on alignment precision, and thermo-mechanical durability, we specifically address ultra-high vacuum (UHV) compatibility of our integration technologies and optical components. A prototype design of an UHV-compatible, crossed beam optical dipole trap setup and its application within a cold atomic quantum sensor is described. First qualification efforts on adhesive micro-integration technologies are presented. These tests are conducted in application-relevant geometries and material combinations common for micro-integrated optical setups. Adhesive aging will be investigated by thermal cycling or gamma radiation exposure. For vacuum compatibility testing, a versatile UHV testing system is currently being set up, enabling residual gas analysis and measurement of total gas rates down to 5•10-10mbar l/s at a base pressure of 10-11 mbar, exceeding the common ASTM E595 test.

International Conference on Space Optics (ICSO)•Jul 12, 2019•1 citation

A compact six-beam 3D magneto-optical trap based on multifunctional metasurface chips

Chen Qing, Huijie Sun, Yize Liu +5 more

Magneto-optical traps (MOTs), indispensable to cold-atom-based quantum computing and quantum precision measurement, are increasingly desired in compact and stable form. Particularly, the six-beam 3D-MOT, distinguished by symmetric geometry and superior trapping performance, finds particularly broad applications. Conventional implementations, however, rely on complex and bulky free-space optics, hindering miniaturization, practical assembly, and long-term stability. Here, we demonstrate a compact six-beam 3D-MOT system that employs two multifunctional optical metasurface chips to implement the optical-field functionalities required for cooling and trapping atoms. By combining two metasurface chips and a vacuum cell, a photonic-integrated cell module (PICM) is implemented as the core assembly and the volume is only" 73*73*107 mm^3" . In success, 1.3 * 10^3 Rb atoms are trapped and cooled to the temperature of ~183 μK. It should be noticed that the laser beam is guided to the metasurface through optical fiber, thus such fully fiber-coupled architecture enables straightforward and stable operations. We believe that this work would pave a practical route toward compact and portable 3D-MOT.

physics.opticsCross-listedarXiv:2610.19504•Oct 15, 2026•0 citations

Miniaturized Optical Frequency Reference and Crossed Beam Optical Dipole Trap Systems for Compact Atom-Based Quantum Sensors

Marc Christ, Conrad Zimmermann, Sascha Neinert +4 more

Atomic quantum technologies enable advanced timekeeping and sensing by leveraging their high precision and accuracy. We focus on developing integrated and robust atom-based quantum sensors through the miniaturization of physics packages, which require highly stable optical frequencies and tools to control and manipulate atoms. Their application in the field demands ultra-stable micro-integrated optical systems, scalable integration techniques, and cost-effective, reproducible production methods.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 23, 2025•0 citations

Integrated design of a compact magneto-optical trap for space applications

Qiuzhi Qu, Bin Wang, Desheng Lü +5 more

In this Letter, we describe an optical assembly that is designed for the engineering application of the atomic laser cooling techniques.Using a folded optical path scheme, we have built a miniaturized, compact magneto-optical trap (CMOT) for an 87 Rb atomic fountain clock.Compared with the conventional magneto-optical traps used in other clocks, our system is more robust, more compact, more stable, and saves about 60% laser power.This optical setup has operated for about a year in our fountain system, passed the thermal cycle tests and the mechanical vibration and shock tests, and maintained a high performance without a need for realignment.

Chinese Optics Letters•Jan 1, 2015•10 citations

Tightly confined atoms in optical dipole traps

Matthias C. Schulz

This thesis reports on the design, setup, and operation of a new atom trap apparatus, which is developed to confine few rubidium atoms in ultrahigh vacuum by means of taylored and dynamically variable light potentials (dipole traps), thus making the atoms available for spectroscopy and controlled manipulations. To maintain low background pressure, atoms of a vapour cell are transferred into a cold atomic beam by laser cooling techniques, and accumulated by a magneto-optic trap (MOT) in a separate part of the vacuum system. The laser cooled atoms are then transferred into dipole traps made of focused far-off-resonant laser fields in single or crossed-beam geometry, which are superimposed with the center of the MOT. Gaussian as well as hollow Laguerre-Gaussian (LG01) beam profiles are used with red-detuned and blue-detuned light. Microfabricated dielectric phase objects allow the efficient and robust mode conversion of Gaussian into Laguerre-Gaussian laser beams. Trap geometries can easily be changed due to the highly flexible experimental setup. The dipole trap laser beams have powers up to several hundred milliwatts and are focused to around 10 m. At a detuning of several tens of nanometers from the atomic resonance, the resulting traps are a few millikelvin deep, and the trapped atoms exhibit motional frequencies near 30 kHz, trap light scattering rates of a few hundred photons per second per atom, and storage times of several seconds. The number of dipole-trapped atoms ranges from more than ten thousand to below ten. The dipole-trapped atoms are detected either by a photon counting system with efficient straylight discrimination, or by recapture into the MOT, which is imaged onto a sensitive photodiode and a CCD-camera. Due to the strong AC-Stark shift imposed by the high-intensity trapping light, energy-selective resonant excitation and detection of the stored atoms is possible. The measured energy distribution is consistent with a harmonic potential shape and allows for the determination of temperatures and heating rates. From initial measurements, the thermal energy is found to be about 10 % of the trap depth. Using a crossed-beam geometry with red-detuned laser light, efficient transfer of atoms between the beams is observed. Optimum transfer occurs when the two beams cross at a radial offset, which can qualitatively be understood when the particle energy and geometrical properties of the two-beam trapping potential are considered. Numerical simulations reproduce the general features of the measured transfer efficiency vs. radial beam offset. This experiment is a first step towards dynamically variable potentials. Atoms have been radially confined in a blue-detuned hollow beam, and their decay time has been determined. This configuration is currently extended to a three-dimensionally confining blue-detuned dipole trap. For advanced laser cooling, state manipulation and spectroscopy of trapped atoms, a system of two diode lasers has been set up which are phase-coherently locked with a difference frequency near 6.834 GHz, to drive Raman transitions between the hyperfine-split ground states of 87Rb atoms. Resonances of such a transition have been recorded in a buffer gas loaded rubidium vapour cell with linewidths below 100 Hz.

•Jan 1, 2002•7 citations
Quantum technologies extensively use laser light for state preparation, manipulation, and readout. For field applications, these systems must be robust and compact, driving the need for miniaturized and highly stable optical setups and system integration. In this work, we present a micro-integrated crossed-beam optical dipole trap setup, the µXODT, designed for trapping and cooling 87 Rb. This fiber-coupled setup operates at 1064 nm wavelength with up to 2.5 W optical power and realizes a free-space crossed beam geometry. The µXODT precisely overlaps two focused beams ( w 0 ≈ 33 µm) at their waists in a 45° crossing angle, achieving a position difference of ≤3.4 µm and a 0.998 power ratio between both beams with long-term stability. We describe the design and assembly process in detail, along with optical and thermal tests with temperatures of up to 65 °C. The system’s volume of 25 ml represents a reduction of more than two orders of magnitude compared to typically used macroscopic setups while demonstrating exceptional mechanical robustness and thermal stability. The µXODT is integrated with an 87 Rb 3D MOT setup, trapping 3 × 10 5 atoms from a laser-cooled atomic cloud, and has shown no signs of degradation after two years of operation.
Cold atom based quantum sensors require robust and miniaturized optical systems for applications on mobile platforms. A micro-integrated optical system (volume ∼25 mL) for trapping and manipulation of neutral atoms is presented. This setup focuses and precisely overlaps two high power laser beams (1064 nm, up to 2W total, wR = 34 µm) launched via a single-mode, polarization maintaining optical fiber, thereby realizing a crossed beam optical dipole trap (ODT). Adhesive bonding is qualified in application relevant geometries and material systems of micro-integrated optical systems for application on mobile platforms or space. Fused silica test blocks (bond area 2 × 4 mm2 ) are bonded with four different adhesives on silicon wafers. Theses samples are aged by thermal cycling (up to −55 °C to 150 °C) and/or gamma-radiation (10 000 mSv) and subsequently the bond strength is evaluated by die shear testing according to MIL-STD-883L. The influence of the environmental aging on the bond strength is presented, the failure mode and the influence of fillets discussed. In addition, the effects of plasma cleaning on the bond strength in this geometry is presented.
Employing compact quantum sensors in field or in space (e.g., small satellites) implies demanding requirements on components and integration technologies. Within our work on integrated sensors, we develop miniaturized, ultra-stable optical setups for optical cooling and trapping of cold atomic gases. Besides challenging demands on alignment precision, and thermo-mechanical durability, we specifically address ultra-high vacuum (UHV) compatibility of our integration technologies and optical components. A prototype design of an UHV-compatible, crossed beam optical dipole trap setup and its application within a cold atomic quantum sensor is described. First qualification efforts on adhesive micro-integration technologies are presented. These tests are conducted in application-relevant geometries and material combinations common for micro-integrated optical setups. Adhesive aging will be investigated by thermal cycling or gamma radiation exposure. For vacuum compatibility testing, a versatile UHV testing system is currently being set up, enabling residual gas analysis and measurement of total gas rates down to 5•10-10mbar l/s at a base pressure of 10-11 mbar, exceeding the common ASTM E595 test.
Magneto-optical traps (MOTs), indispensable to cold-atom-based quantum computing and quantum precision measurement, are increasingly desired in compact and stable form. Particularly, the six-beam 3D-MOT, distinguished by symmetric geometry and superior trapping performance, finds particularly broad applications. Conventional implementations, however, rely on complex and bulky free-space optics, hindering miniaturization, practical assembly, and long-term stability. Here, we demonstrate a compact six-beam 3D-MOT system that employs two multifunctional optical metasurface chips to implement the optical-field functionalities required for cooling and trapping atoms. By combining two metasurface chips and a vacuum cell, a photonic-integrated cell module (PICM) is implemented as the core assembly and the volume is only" 73*73*107 mm^3" . In success, 1.3 * 10^3 Rb atoms are trapped and cooled to the temperature of ~183 μK. It should be noticed that the laser beam is guided to the metasurface through optical fiber, thus such fully fiber-coupled architecture enables straightforward and stable operations. We believe that this work would pave a practical route toward compact and portable 3D-MOT.
In this Letter, we describe an optical assembly that is designed for the engineering application of the atomic laser cooling techniques.Using a folded optical path scheme, we have built a miniaturized, compact magneto-optical trap (CMOT) for an 87 Rb atomic fountain clock.Compared with the conventional magneto-optical traps used in other clocks, our system is more robust, more compact, more stable, and saves about 60% laser power.This optical setup has operated for about a year in our fountain system, passed the thermal cycle tests and the mechanical vibration and shock tests, and maintained a high performance without a need for realignment.
This thesis reports on the design, setup, and operation of a new atom trap apparatus, which is developed to confine few rubidium atoms in ultrahigh vacuum by means of taylored and dynamically variable light potentials (dipole traps), thus making the atoms available for spectroscopy and controlled manipulations. To maintain low background pressure, atoms of a vapour cell are transferred into a cold atomic beam by laser cooling techniques, and accumulated by a magneto-optic trap (MOT) in a separate part of the vacuum system. The laser cooled atoms are then transferred into dipole traps made of focused far-off-resonant laser fields in single or crossed-beam geometry, which are superimposed with the center of the MOT. Gaussian as well as hollow Laguerre-Gaussian (LG01) beam profiles are used with red-detuned and blue-detuned light. Microfabricated dielectric phase objects allow the efficient and robust mode conversion of Gaussian into Laguerre-Gaussian laser beams. Trap geometries can easily be changed due to the highly flexible experimental setup. The dipole trap laser beams have powers up to several hundred milliwatts and are focused to around 10 m. At a detuning of several tens of nanometers from the atomic resonance, the resulting traps are a few millikelvin deep, and the trapped atoms exhibit motional frequencies near 30 kHz, trap light scattering rates of a few hundred photons per second per atom, and storage times of several seconds. The number of dipole-trapped atoms ranges from more than ten thousand to below ten. The dipole-trapped atoms are detected either by a photon counting system with efficient straylight discrimination, or by recapture into the MOT, which is imaged onto a sensitive photodiode and a CCD-camera. Due to the strong AC-Stark shift imposed by the high-intensity trapping light, energy-selective resonant excitation and detection of the stored atoms is possible. The measured energy distribution is consistent with a harmonic potential shape and allows for the determination of temperatures and heating rates. From initial measurements, the thermal energy is found to be about 10 % of the trap depth. Using a crossed-beam geometry with red-detuned laser light, efficient transfer of atoms between the beams is observed. Optimum transfer occurs when the two beams cross at a radial offset, which can qualitatively be understood when the particle energy and geometrical properties of the two-beam trapping potential are considered. Numerical simulations reproduce the general features of the measured transfer efficiency vs. radial beam offset. This experiment is a first step towards dynamically variable potentials. Atoms have been radially confined in a blue-detuned hollow beam, and their decay time has been determined. This configuration is currently extended to a three-dimensionally confining blue-detuned dipole trap. For advanced laser cooling, state manipulation and spectroscopy of trapped atoms, a system of two diode lasers has been set up which are phase-coherently locked with a difference frequency near 6.834 GHz, to drive Raman transitions between the hyperfine-split ground states of 87Rb atoms. Resonances of such a transition have been recorded in a buffer gas loaded rubidium vapour cell with linewidths below 100 Hz.