Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2408.00530 · Modern Physics Letters A

Robust implementation of discrete-time quantum walks in any finite-dimensional quantum system

Biswayan Nandi, Sandipan Singha, Ankan Datta, Amit Saha, Amlan Chakrabarti

Published Mar 29, 2025• 2 citations
arXivHTMLPDF

Abstract

Research has shown that quantum walks can accelerate certain quantum algorithms and act as a universal paradigm for quantum processing. The discrete-time quantum walk (DTQW) model, owing to its discrete nature, stands out as one of the most suitable choices for circuit implementation. Nevertheless, most current implementations are characterized by extensive, multi-layered quantum circuits, leading to higher computational expenses and a notable decrease in the number of confidently executable time steps on current quantum computers. Since quantum computers are not scalable enough in this NISQ era, we also must confine ourselves to the ancilla-free frontier zone. Therefore, in this paper, we have successfully cut down the circuit cost concerning gate count and circuit depth by half through our proposed methodology in qubit systems as compared to the state-of-the-art increment–decrement approach. Furthermore, for the engineering excellence of our proposed approach, we implement DTQW in any finite-dimensional quantum system with akin efficiency. To ensure an efficient implementation of quantum walks without requiring ancilla, we have incorporated an intermediate qudit technique for decomposing multi-qubit gates. Experimental outcomes hold significance far beyond the realm of just a few time steps, laying the groundwork for dependable implementation and utilization on quantum computers.

DOI
10.1142/s021773232550035x

Related papers

Efficient Implementation of Discrete-Time Quantum Walks on Quantum Computers

Luca Razzoli, Gabriele Cenedese, Maria Bondani +1 more

Quantum walks have proven to be a universal model for quantum computation and to provide speed-up in certain quantum algorithms. The discrete-time quantum walk (DTQW) model, among others, is one of the most suitable candidates for circuit implementation due to its discrete nature. Current implementations, however, are usually characterized by quantum circuits of large size and depth, which leads to a higher computational cost and severely limits the number of time steps that can be reliably implemented on current quantum computers. In this work, we propose an efficient and scalable quantum circuit implementing the DTQW on the 2n-cycle based on the diagonalization of the conditional shift operator. For t time steps of the DTQW, the proposed circuit requires only O(n2+nt) two-qubit gates compared to the O(n2t) of the current most efficient implementation based on quantum Fourier transforms. We test the proposed circuit on an IBM quantum device for a Hadamard DTQW on the 4-cycle and 8-cycle characterized by periodic dynamics and by recurrent generation of maximally entangled single-particle states. Experimental results are meaningful well beyond the regime of few time steps, paving the way for reliable implementation and use on quantum computers.

arXiv:2402.01854•Entropy•Apr 2, 2024•25 citations

Universal quantum computing using single-particle discrete-time quantum walk

Shivani Singh, Prateek Chawla, Anupam Sarkar +1 more

Quantum walk has been regarded as a primitive to universal quantum computation. In this paper, we demonstrate the realization of the universal set of quantum gates on two- and three-qubit systems by using the operations required to describe the single particle discrete-time quantum walk on a position space. The idea is to utilize the effective Hilbert space of the single qubit and the position space on which it evolves in order to realize multi-qubit states and universal set of quantum gates on them. Realization of many non-trivial gates and engineering arbitrary states is simpler in the proposed quantum walk model when compared to the circuit based model of computation. We will also discuss the scalability of the model and some propositions for using lesser number of qubits in realizing larger qubit systems.

arXiv:1907.04084•Scientific Reports•Jun 2, 2021•46 citations

Computational power of single qubit discrete-time quantum walk

Shivani Singh, Prateek Chawla, Anupam Sarkar +1 more

Abstract Quantum walk has been regarded as a primitive to universal quantum computation. By using the operations required to describe the single particle discrete-time quantum walk on a position space we demonstrate the realization of the universal set of gates on two-and three-qubit system. The idea is to reap the effective Hilbert space of the single qubit and the position space on which it evolves in superposition of position space in order to realize multi-qubit states and universal set of quantum gates on them. Realization of many non-trivial gates in the form of engineering arbitrary states is simpler in the proposed quantum walk model when compared to the circuit based model of computation. We will also discuss the scalability of the model and some propositions for using lesser number of qubits in realizing larger qubit systems.

•Feb 23, 2021•4 citations

Moving quantum states without swap via intermediate higher-dimensional qudits

Amit Saha, Debasri Saha, Amlan Chakrabarti

Quantum algorithms can be realized in the form of a quantum circuit. To map a quantum circuit for a specific quantum algorithm to quantum hardware, qubit mapping is an imperative technique based on the qubit topology. Due to the neighborhood constraint of qubit topology, the implementation of the quantum algorithm rightly, is essential for moving information around in a quantum computer. Swapping of qubits using a swap gate moves the quantum state between two qubits and solves the neighborhood constraint of qubit topology. Although, one needs to decompose the swap gate into three controlled-not gates to implement the swap gate efficiently, but unwillingly quantum cost with respect to the gate count and depth increases. In this paper, a formalism of moving quantum states without using swap operation is introduced. Moving quantum states through qubits have been attained with the adoption of temporary intermediate qudit states. This introduction of intermediate qudit states has exhibited a three times reduction in quantum cost with respect to the gate count and approximately two times reduction with respect to circuit depth compared to the state-of-the-art approach of the swap gate insertion. We also exhibit that the adoption of the intermediate qudit makes the approach sublimer than the existing works by obtaining a better fidelity. Furthermore, the proposed approach is generalized to any finite-dimensional quantum system.

arXiv:2106.09089•Physical Review A•Jul 21, 2022•3 citations

Generalized Efficient Quantum Circuit Implementation of Discrete-Time Quantum Walks on Cayley Graphs

Seoyoon Kang

We present a generalized and efficient quantum circuit framework for implementing discrete-time quantum walks (DTQWs) on Cayley graphs of arbitrary dimension. Building on the Boundary QFT scheme of Razzoli et al., we introduce a systematic multi-stage decomposition of the shift operator for 1D Cayley graphs across three classes of generating sets: inverse-closed without involutions, inverse-closed with an involution, and non-inverse-closed. The decomposition hierarchically factorizes the QFT-diagonalized shift operator into structured block components, progressively reducing the control degree of the required rotation gates and replacing high-degree multi-qubit controlled operations with collections of lower-degree equivalents. We extend this construction to $d$-dimensional torus graphs and provide explicit circuit implementations for an 8-Cayley graph and a $\mathbb{Z}_{16} \times \mathbb{Z}_8$ torus graph as concrete illustrations. Gate complexity analysis using the linear CNOT scaling of Rosa et al. demonstrates that the decomposed implementation achieves a substantial reduction in upper-bound CNOT cost relative to the naive implementation within the regime $k \leq 64$ for inverse-closed graphs and $k \leq 16$ for non-inverse-closed graphs, where $k$ denotes the degree of the generating set. Benchmarking further reveals that this efficiency gain is largely insensitive to the system size $N$, identifying $k$ as the dominant resource parameter for the shift operator. These results provide a scalable and hardware-conscious pathway toward practical DTQW implementations on near-term quantum devices.

quant-pharXiv:2608.25136•Aug 27, 2026•0 citations

Testing the Efficiency of Digital Simulation of Quantum Walks on IBM’s Q platform - towards quantum experimental algorithms

Luis Ángel Sedas

This thesis presents several quantum circuit implementations of discrete and continuous quantum walks in cycle graphs. Quantum walks have become an important tool for developing quantum algorithms, that is why this work is a contribution to the area of quantum computation, specially for scientist who want to test their developed algorithms, in a real quantum device as the IBM-Q Experience platform. We give a complete suite of quantum gates that are needed to simulate quantum walks and quantum walk-based algorithms. Since some of these quantum gates are not elementary, we show how to decompose them into fundamental quantum gates available at Qiskit, an open-source quantum computing software development framework created by IBM. This is an important contribution towards the development of a professional platform for simulating and testing quantum algorithms. We found that the decomposition of unitary gates, related to quantum walks, into elementary gates is not very well documented in the literature. We studied the efficiency of both, the number of qubits and logic gates needed for each circuit, and the correctness of the results of each experiment by comparing the theoretical expected output state with the output generated by quantum simulators. Implementations of both discrete and continuous quantum walks in quantum circuits rely heavily on controlled gates, that when decomposed into fundamental gates add a high number of quantum gates and depth. Experiments were performed on a real quantum device, but results showed that the quantum computer is not good enough when executing these quantum circuits, due to the depth of the circuits and the high amount of CNOT gates required. We tested different implementations and optimization methods for the simplification of the quantum circuits, were we find that resources grow linearly w.r.t the number of qubits, and the minimum amount of gates required for the discrete case in C8 was 144 quantum gates with a depth of 111, which is the reason of the error between the simulations and the implementations in the quantum device.

•Mar 14, 2020•0 citations
Research has shown that quantum walks can accelerate certain quantum algorithms and act as a universal paradigm for quantum processing. The discrete-time quantum walk (DTQW) model, owing to its discrete nature, stands out as one of the most suitable choices for circuit implementation. Nevertheless, most current implementations are characterized by extensive, multi-layered quantum circuits, leading to higher computational expenses and a notable decrease in the number of confidently executable time steps on current quantum computers. Since quantum computers are not scalable enough in this NISQ era, we also must confine ourselves to the ancilla-free frontier zone. Therefore, in this paper, we have successfully cut down the circuit cost concerning gate count and circuit depth by half through our proposed methodology in qubit systems as compared to the state-of-the-art increment–decrement approach. Furthermore, for the engineering excellence of our proposed approach, we implement DTQW in any finite-dimensional quantum system with akin efficiency. To ensure an efficient implementation of quantum walks without requiring ancilla, we have incorporated an intermediate qudit technique for decomposing multi-qubit gates. Experimental outcomes hold significance far beyond the realm of just a few time steps, laying the groundwork for dependable implementation and utilization on quantum computers.
Quantum walks have proven to be a universal model for quantum computation and to provide speed-up in certain quantum algorithms. The discrete-time quantum walk (DTQW) model, among others, is one of the most suitable candidates for circuit implementation due to its discrete nature. Current implementations, however, are usually characterized by quantum circuits of large size and depth, which leads to a higher computational cost and severely limits the number of time steps that can be reliably implemented on current quantum computers. In this work, we propose an efficient and scalable quantum circuit implementing the DTQW on the 2n-cycle based on the diagonalization of the conditional shift operator. For t time steps of the DTQW, the proposed circuit requires only O(n2+nt) two-qubit gates compared to the O(n2t) of the current most efficient implementation based on quantum Fourier transforms. We test the proposed circuit on an IBM quantum device for a Hadamard DTQW on the 4-cycle and 8-cycle characterized by periodic dynamics and by recurrent generation of maximally entangled single-particle states. Experimental results are meaningful well beyond the regime of few time steps, paving the way for reliable implementation and use on quantum computers.
Quantum walk has been regarded as a primitive to universal quantum computation. In this paper, we demonstrate the realization of the universal set of quantum gates on two- and three-qubit systems by using the operations required to describe the single particle discrete-time quantum walk on a position space. The idea is to utilize the effective Hilbert space of the single qubit and the position space on which it evolves in order to realize multi-qubit states and universal set of quantum gates on them. Realization of many non-trivial gates and engineering arbitrary states is simpler in the proposed quantum walk model when compared to the circuit based model of computation. We will also discuss the scalability of the model and some propositions for using lesser number of qubits in realizing larger qubit systems.
Abstract Quantum walk has been regarded as a primitive to universal quantum computation. By using the operations required to describe the single particle discrete-time quantum walk on a position space we demonstrate the realization of the universal set of gates on two-and three-qubit system. The idea is to reap the effective Hilbert space of the single qubit and the position space on which it evolves in superposition of position space in order to realize multi-qubit states and universal set of quantum gates on them. Realization of many non-trivial gates in the form of engineering arbitrary states is simpler in the proposed quantum walk model when compared to the circuit based model of computation. We will also discuss the scalability of the model and some propositions for using lesser number of qubits in realizing larger qubit systems.
Quantum algorithms can be realized in the form of a quantum circuit. To map a quantum circuit for a specific quantum algorithm to quantum hardware, qubit mapping is an imperative technique based on the qubit topology. Due to the neighborhood constraint of qubit topology, the implementation of the quantum algorithm rightly, is essential for moving information around in a quantum computer. Swapping of qubits using a swap gate moves the quantum state between two qubits and solves the neighborhood constraint of qubit topology. Although, one needs to decompose the swap gate into three controlled-not gates to implement the swap gate efficiently, but unwillingly quantum cost with respect to the gate count and depth increases. In this paper, a formalism of moving quantum states without using swap operation is introduced. Moving quantum states through qubits have been attained with the adoption of temporary intermediate qudit states. This introduction of intermediate qudit states has exhibited a three times reduction in quantum cost with respect to the gate count and approximately two times reduction with respect to circuit depth compared to the state-of-the-art approach of the swap gate insertion. We also exhibit that the adoption of the intermediate qudit makes the approach sublimer than the existing works by obtaining a better fidelity. Furthermore, the proposed approach is generalized to any finite-dimensional quantum system.
We present a generalized and efficient quantum circuit framework for implementing discrete-time quantum walks (DTQWs) on Cayley graphs of arbitrary dimension. Building on the Boundary QFT scheme of Razzoli et al., we introduce a systematic multi-stage decomposition of the shift operator for 1D Cayley graphs across three classes of generating sets: inverse-closed without involutions, inverse-closed with an involution, and non-inverse-closed. The decomposition hierarchically factorizes the QFT-diagonalized shift operator into structured block components, progressively reducing the control degree of the required rotation gates and replacing high-degree multi-qubit controlled operations with collections of lower-degree equivalents. We extend this construction to ddd-dimensional torus graphs and provide explicit circuit implementations for an 8-Cayley graph and a Z16×Z8\mathbb{Z}_{16} \times \mathbb{Z}_8Z16​×Z8​ torus graph as concrete illustrations. Gate complexity analysis using the linear CNOT scaling of Rosa et al. demonstrates that the decomposed implementation achieves a substantial reduction in upper-bound CNOT cost relative to the naive implementation within the regime k≤64k \leq 64k≤64 for inverse-closed graphs and k≤16k \leq 16k≤16 for non-inverse-closed graphs, where kkk denotes the degree of the generating set. Benchmarking further reveals that this efficiency gain is largely insensitive to the system size NNN, identifying kkk as the dominant resource parameter for the shift operator. These results provide a scalable and hardware-conscious pathway toward practical DTQW implementations on near-term quantum devices.
This thesis presents several quantum circuit implementations of discrete and continuous quantum walks in cycle graphs. Quantum walks have become an important tool for developing quantum algorithms, that is why this work is a contribution to the area of quantum computation, specially for scientist who want to test their developed algorithms, in a real quantum device as the IBM-Q Experience platform. We give a complete suite of quantum gates that are needed to simulate quantum walks and quantum walk-based algorithms. Since some of these quantum gates are not elementary, we show how to decompose them into fundamental quantum gates available at Qiskit, an open-source quantum computing software development framework created by IBM. This is an important contribution towards the development of a professional platform for simulating and testing quantum algorithms. We found that the decomposition of unitary gates, related to quantum walks, into elementary gates is not very well documented in the literature. We studied the efficiency of both, the number of qubits and logic gates needed for each circuit, and the correctness of the results of each experiment by comparing the theoretical expected output state with the output generated by quantum simulators. Implementations of both discrete and continuous quantum walks in quantum circuits rely heavily on controlled gates, that when decomposed into fundamental gates add a high number of quantum gates and depth. Experiments were performed on a real quantum device, but results showed that the quantum computer is not good enough when executing these quantum circuits, due to the depth of the circuits and the high amount of CNOT gates required. We tested different implementations and optimization methods for the simplification of the quantum circuits, were we find that resources grow linearly w.r.t the number of qubits, and the minimum amount of gates required for the discrete case in C8 was 144 quantum gates with a depth of 111, which is the reason of the error between the simulations and the implementations in the quantum device.