An operating system for executing applications on quantum network nodes
Carlo Delle Donne, Mariagrazia Iuliano, Bart van der Vecht, G. M. Ferreira, Hana Jirovská, Thom van der Steenhoven, Axel Dahlberg, Matthew Skrzypczyk, Dario Fioretto, Markus Teller, Pavel Filippov, Alejandro R.‐P. Montblanch, Julius Fischer, Hendrik Benjamin van Ommen, N. Demetriou, Dominik Leichtle, Luka Music, H. Ollivier, Ingmar te Raa, W. Kozlowski, T. H. Taminiau, Przemysław Pawełczak, Tracy E. Northup, Ronald Hanson, Stephanie Wehner
The goal of future quantum networks is to enable new internet applications that are impossible to achieve using only classical communication1–3. Up to now, demonstrations of quantum network applications4–6 and functionalities7–12 on quantum processors have been performed in ad hoc software that was specific to the experimental setup, programmed to perform one single task (the application experiment) directly into low-level control devices using expertise in experimental physics. Here we report on the design and implementation of an architecture capable of executing quantum network applications on quantum processors in platform-independent high-level software. We demonstrate the capability of the architecture to execute applications in high-level software by implementing it as a quantum network operating system—QNodeOS—and executing test programs, including a delegated computation from a client to a server13 on two quantum network nodes based on nitrogen-vacancy (NV) centres in diamond14,15. We show how our architecture allows us to maximize the use of quantum network hardware by multitasking different applications. Our architecture can be used to execute programs on any quantum processor platform corresponding to our system model, which we illustrate by demonstrating an extra driver for QNodeOS for a trapped-ion quantum network node based on a single 40Ca+ atom16. Our architecture lays the groundwork for computer science research in quantum network programming and paves the way for the development of software that can bring quantum network technology to society. A new quantum operating system architecture is described that is capable of executing applications on quantum networks in high-level software, which is a step towards bringing quantum network technology to society.
The goal of future quantum networks is to enable new internet applications that are impossible to achieve using only classical communication1–3. Up to now, demonstrations of quantum network applications4–6 and functionalities7–12 on quantum processors have been performed in ad hoc software that was specific to the experimental setup, programmed to perform one single task (the application experiment) directly into low-level control devices using expertise in experimental physics. Here we report on the design and implementation of an architecture capable of executing quantum network applications on quantum processors in platform-independent high-level software. We demonstrate the capability of the architecture to execute applications in high-level software by implementing it as a quantum network operating system—QNodeOS—and executing test programs, including a delegated computation from a client to a server13 on two quantum network nodes based on nitrogen-vacancy (NV) centres in diamond14,15. We show how our architecture allows us to maximize the use of quantum network hardware by multitasking different applications. Our architecture can be used to execute programs on any quantum processor platform corresponding to our system model, which we illustrate by demonstrating an extra driver for QNodeOS for a trapped-ion quantum network node based on a single 40Ca+ atom16. Our architecture lays the groundwork for computer science research in quantum network programming and paves the way for the development of software that can bring quantum network technology to society. A new quantum operating system architecture is described that is capable of executing applications on quantum networks in high-level software, which is a step towards bringing quantum network technology to society.
Recently, a first-of-its-kind operating system for programmable quantum network nodes was developed, called QNodeOS. Here, we present an extension of QNodeOS called Qoala, which introduces (1) a unified program format for hybrid interactive classical-quantum programs, providing a well-defined target for compilers, and (2) a runtime representation of a program that allows joint scheduling of the hybrid classical-quantum program, multitasking, and asynchronous program execution. Based on concrete design considerations, we put forward the architecture of Qoala, including the program structure and execution mechanism. We implement Qoala in the form of a modular and extendible simulator that is validated against real-world quantum network hardware (available online). However, Qoala is not meant to be purely a simulator, and implementation is planned on real hardware. We evaluate Qoala's effectiveness and performance sensitivity to latencies and network schedules using an extensive simulation study. Qoala provides a framework that opens the door for future computer science research into quantum network applications, including scheduling algorithms and compilation strategies that can now readily be explored using the framework and tools provided.
The aim of a quantum network is to enable the generation of end-to-end entangled links between end nodes of the network, so that they can execute quantum network applications. To facilitate this, it is desirable to have robust control of the network in order to be able to provide a reliable service to the end nodes. In recent work arXiv:2503.12582, we proposed a modular control architecture for a generate-when-request type network. This control architecture enables quantum network applications to be executed on end nodes running a modern operating system such as QNodeOS arXiv:2407.18306. In that work, we performed an evaluation of our architecture based on a proof-of-concept implementation. In the course of performing this evaluation, we discovered many outstanding questions and challenges. These relate not only to implementing our specific control architecture, but also to the design of any quantum network control architecture. Here, we describe some outstanding questions and challenges, discuss possible solutions, and identify where existing protocols require adaptation or new protocols must be designed.
Quantum communication brings radically new capabilities that are provably impossible to attain in any classical network. Here, we take the first step from a physics experiment to a quantum internet system. We propose a functional allocation of a quantum network stack, and construct the first physical and link layer protocols that turn ad-hoc physics experiments producing heralded entanglement between quantum processors into a well-defined and robust service. This lays the groundwork for designing and implementing scalable control and application protocols in platform-independent software. To design our protocol, we identify use cases, as well as fundamental and technological design considerations of quantum network hardware, illustrated by considering the state-of-the-art quantum processor platform available to us (Nitrogen-Vacancy (NV) centers in diamond). Using a purpose built discrete-event simulator for quantum networks, we examine the robustness and performance of our protocol using extensive simulations on a supercomputing cluster. We perform a full implementation of our protocol in our simulator, where we successfully validate the physical simulation model against data gathered from the NV hardware. We first observe that our protocol is robust even in a regime of exaggerated losses of classical control messages with only little impact on the performance of the system. We proceed to study the performance of our protocols for 169 distinct simulation scenarios, including trade-offs between traditional performance metrics such as throughput, and the quality of entanglement. Finally, we initiate the study of quantum network scheduling strategies to optimize protocol performance for different use cases.
Abstract We introduce a simulator of a quantum internet with the specific goal to support software development. A quantum internet consists of local quantum processors, which are interconnected by quantum communication channels that enable the transmission of qubits between the different processors. While many simulators exist for local quantum processors, there is presently no simulator for a quantum internet tailored towards software development. Quantum internet protocols require both classical as well as quantum information to be exchanged between the network nodes, next to the execution of gates and measurements on a local quantum processor. This requires quantum internet software to integrate classical communication programming practises with novel quantum ones. SimulaQron is built to enable application development and explore software engineering practises for a quantum internet. SimulaQron can be run on one or more classical computers to simulate local quantum processors, which are transparently connected in the background to enable the transmission of qubits or the generation of entanglement between remote processors. Application software can access the simulated local quantum processors to execute local quantum instructions and measurements, but also to transmit qubits to remote nodes in the network. SimulaQron features a modular design that performs a distributed simulation based on any existing simulation of a quantum computer capable of integrating with Python. Programming libraries for Python and C are provided to facilitate application development.
We propose an architecture for scheduling network operations enabling the end-to-end generation of entanglement according to user demand. The main challenge solved by this architecture is to allow for the integration of a network schedule with the execution of quantum programs running on processing end nodes in order to realise quantum network applications. A key element of this architecture is the definition of an entanglement packet to meet application requirements on near-term quantum networks where the lifetimes of the qubits stored at the end nodes are limited. Our architecture is fully modular and hardware agnostic, and defines a framework for further research on specific components that can now be developed independently of each other. In order to evaluate our architecture, we realise a proof of concept implementation on a simulated 6-node network in a star topology. We show our architecture facilitates the execution of quantum network applications, and that robust admission control is required to maintain quality of service. Finally, we comment on potential bottlenecks in our architecture and provide suggestions for future improvements.
Abstract We introduce NetQASM, a low-level instruction set architecture for quantum internet applications. NetQASM is a universal, platform-independent and extendable instruction set with support for local quantum gates, powerful classical logic and quantum networking operations for remote entanglement generation. Furthermore, NetQASM allows for close integration of classical logic and communication at the application layer with quantum operations at the physical layer. This enables quantum network applications to be programmed in high-level platform-independent software, which is not possible using any other QASM variants. We implement NetQASM in a series of tools to write, parse, encode and run NetQASM code, which are available online. Our tools include a higher-level software development kit (SDK) in Python, which allows an easy way of programming applications for a quantum internet. Our SDK can be used at home by making use of our existing quantum simulators, NetSquid and SimulaQron, and will also provide a public interface to hardware released on a future iteration of Quantum Network Explorer.