Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2407.10415 · Quantum Science and Technology

OnionVQE optimization strategy for ground state preparation on NISQ devices

Aikaterini Gratsea, Johannes Selisko, Maximilian Amsler, Christopher Wever, Thomas Eckl, Ge. G. Samsonidze

Published Oct 23, 2024• 1 citation
arXivHTMLPDF

Abstract

Abstract The variational quantum eigensolver (VQE) is one of the most promising and widely used algorithms for exploiting the capabilities of current Noisy Intermediate-Scale Quantum (NISQ) devices. However, VQE algorithms suffer from a plethora of issues, such as barren plateaus, local minima, quantum hardware noise, and limited qubit connectivity, thus posing challenges for their successful deployment on hardware and simulators. In this work, we propose a VQE optimization strategy that builds upon recent advances in the literature, and exhibits very shallow circuit depths when applied to the specific system of interest, namely a model Hamiltonian representing a cuprate superconductor. These features make our approach a favorable candidate for generating good ground state approximations on current NISQ devices. Our findings illustrate the potential of VQE algorithmic development for leveraging the full capabilities of NISQ devices.

DOI
10.1088/2058-9565/ad8a85

Related papers

Variational quantum eigensolver with reduced circuit complexity

Yu Zhang, Łukasz Cincio, Christian F. A. Negre +6 more

Abstract The variational quantum eigensolver (VQE) is one of the most promising algorithms to find eigenstates of a given Hamiltonian on noisy intermediate-scale quantum devices (NISQ). The practical realization is limited by the complexity of quantum circuits. Here we present an approach to reduce quantum circuit complexity in VQE for electronic structure calculations. Our ClusterVQE algorithm splits the initial qubit space into clusters which are further distributed on individual (shallower) quantum circuits. The clusters are obtained based on mutual information reflecting maximal entanglement between qubits, whereas inter-cluster correlation is taken into account via a new “dressed” Hamiltonian. ClusterVQE therefore allows exact simulation of the problem by using fewer qubits and shallower circuit depth at the cost of additional classical resources, making it a potential leader for quantum chemistry simulations on NISQ devices. Proof-of-principle demonstrations are presented for several molecular systems based on quantum simulators as well as IBM quantum devices.

arXiv:2106.07619•npj Quantum Information•Aug 12, 2022•88 citations

Machine-Learning-Enhanced Optimization of Noise-Resilient Variational Quantum Eigensolvers

Luca Johannes Wagner, Kim A. Nicoli, Lena Funcke

Variational Quantum Eigensolvers (VQEs) are a powerful class of hybrid quantum-classical algorithms designed to approximate the ground state of a quantum system described by its Hamiltonian. VQEs hold promise for various applications, including lattice field theory. However, the inherent noise of Noisy Intermediate-Scale Quantum (NISQ) devices poses a significant challenge for running VQEs as these algorithms are particularly susceptible to noise, e.g., measurement shot noise and hardware noise. In a recent work, it was proposed to enhance the classical optimization of VQEs with Gaussian Processes (GPs) and Bayesian Optimization, as these machine-learning techniques are well-suited for handling noisy data. In these proceedings, we provide additional insights into this new algorithm and present further numerical experiments. In particular, we examine the impact of hardware noise and error mitigation on the algorithm's performance. We validate the algorithm using classical simulations of quantum hardware, including hardware noise benchmarks, which have not been considered in previous works. Our numerical experiments demonstrate that GP-enhanced algorithms can outperform state-of-the-art baselines, laying the foundation for future research on deploying these techniques to real quantum hardware and lattice field theory setups.

arXiv:2501.17689•International Symposium on Lattice Field Theory (LATTICE)•Feb 21, 2025•4 citations

Pre-optimizing variational quantum eigensolvers with tensor networks

Abid Khan, Bryan K. Clark, Norm M. Tubman

The variational quantum eigensolver (VQE) is a promising algorithm for demonstrating quantum advantage in the noisy intermediate-scale quantum (NISQ) era. However, optimizing VQE from random initial starting parameters is challenging due to a variety of issues including barren plateaus, optimization in the presence of noise, and slow convergence. While simulating quantum circuits classically is generically difficult, classical computing methods have been developed extensively, and powerful tools now exist to approximately simulate quantum circuits. This opens up various strategies that limit the amount of optimization that needs to be performed on quantum hardware. Here we present and benchmark an approach where we find good starting parameters for parameterized quantum circuits by classically simulating VQE by approximating the parameterized quantum circuit (PQC) as a matrix product state (MPS) with a limited bond dimension. Calling this approach the variational tensor network eigensolver (VTNE), we apply it to the 1D and 2D Fermi-Hubbard model with system sizes that use up to 32 qubits. We find that in 1D, VTNE can find parameters for PQC whose energy error is within 0.5% relative to the ground state. In 2D, the parameters that VTNE finds have significantly lower energy than their starting configurations, and we show that starting VQE from these parameters requires non-trivially fewer operations to come down to a given energy. The higher the bond dimension we use in VTNE, the less work needs to be done in VQE. By generating classically optimized parameters as the initialization for the quantum circuit one can alleviate many of the challenges that plague VQE on quantum computers.

arXiv:2310.12965•Oct 19, 2023•30 citations

Photonic variational quantum eigensolver for NISQ-compatible quantum technology

Kang-Min Hu, Min Namkung, Hyang-Tag Lim

Quantum computers have the potential to deliver speed-ups for solving certain important problems that are intractable for classical counterparts, making them a promising avenue for advancing modern computation. However, many quantum algorithms require deep quantum circuits, which are challenging to implement on current noisy devices. To address this limitation, variational quantum algorithms (VQAs) have been actively developed, enabling practical quantum computing in the noisy intermediate-scale quantum (NISQ) era. Among them, the variational quantum eigensolver (VQE) stands out as a leading approach for solving problems in quantum chemistry, many-body physics, and even integer factorization. The VQE algorithm can be implemented on various quantum hardware platforms, including photonic systems, quantum dots, trapped ions, neutral atoms, and superconducting circuits. In particular, photonic platforms offer several advantages: they operate at room temperature, exhibit low decoherence, and support multiple degrees of freedom, making them suitable for scalable, high-dimensional quantum computation. Here we present methodologies for realizing VQE on photonic systems, highlighting their potential for practical quantum computing. We first provide a theoretical overview of the VQE framework, focusing on the procedure for variationally estimating ground state energies. We then explore how photonic systems can implement these processes, showing that a wide variety of problems can be addressed using either multiple qubit states or a single qudit state.

quant-pharXiv:2512.18952•Nano Convergence•Dec 23, 2025•2 citations

Scalable Quantum Ground State Preparation of the Heisenberg Model: A Variational Quantum Eigensolver Approach

Wang, Jinao, Rimika Jaiswal

Quantum systems have historically been formidable to simulate using classical computational methods, particularly as the system size grows. In recent years, advancements in quantum computing technology have offered new opportunities for tackling complex quantum systems, potentially enabling the study and preparation of quantum states directly on quantum processors themselves. The Variational Quantum Eigensolver (VQE) algorithm is a system composed of a quantum circuit as well as a classical optimizer that can be used to efficiently prepare interesting many-body states on the current noisy intermediate-scale quantum (NISQ) devices. We assess the efficacy and scalability of VQE by preparing the ground states of the 1D generalized Heisenberg model, a pivotal model in understanding magnetic materials. We present an ansatz capable of preparing the ground states for all possible values of the coupling, including the critical states for the anisotropic XXZ model. This paper also aims to provide insights into the precision and time consumption involved in classical and optimized sampling approaches in the calculation of expectation values. In preparing the ground state for the Heisenberg models, this paper paves the way for more efficient quantum algorithms and contributes to the broader field of condensed matter physics.

arXiv:2308.12020•Aug 23, 2023•5 citations

Simulating noisy variational quantum eigensolver with local noise models

Jinfeng Zeng, Zipeng Wu, Chenfeng Cao +4 more

The variational quantum eigensolver (VQE) is a promising algorithm to demonstrate quantum advantage on near-term noisy-intermediate-scale quantum (NISQ) computers. One central problem of VQE is the effect of noise, especially physical noise, on realistic quantum computers. We systematically study the effect of noise for the VQE algorithm by performing numerical simulations with various local noise models, including amplitude damping, dephasing, and depolarizing noise. We show that the ground state energy will deviate from the exact value as the noise probability increase, and typically, the noise will accumulate as the circuit depth increase. The results suggest that the noisy quantum system can remain entanglement at the noise level of NISQ devices by comparing the VQE solution with the mean-field solution for the many-body ground state problem. We build a noise model to capture the noise in a real quantum computer, and the corresponding numerical simulation is consistent with experimental results on IBM Quantum computers through cloud. Our work sheds new light on the practical research of noisy VQE, and the deep understanding of the noise effect of VQE will also help develop error mitigation techniques on near-term quantum computers.

arXiv:2010.14821•Quantum Engineering•Aug 30, 2021•27 citations
Abstract The variational quantum eigensolver (VQE) is one of the most promising and widely used algorithms for exploiting the capabilities of current Noisy Intermediate-Scale Quantum (NISQ) devices. However, VQE algorithms suffer from a plethora of issues, such as barren plateaus, local minima, quantum hardware noise, and limited qubit connectivity, thus posing challenges for their successful deployment on hardware and simulators. In this work, we propose a VQE optimization strategy that builds upon recent advances in the literature, and exhibits very shallow circuit depths when applied to the specific system of interest, namely a model Hamiltonian representing a cuprate superconductor. These features make our approach a favorable candidate for generating good ground state approximations on current NISQ devices. Our findings illustrate the potential of VQE algorithmic development for leveraging the full capabilities of NISQ devices.
Abstract The variational quantum eigensolver (VQE) is one of the most promising algorithms to find eigenstates of a given Hamiltonian on noisy intermediate-scale quantum devices (NISQ). The practical realization is limited by the complexity of quantum circuits. Here we present an approach to reduce quantum circuit complexity in VQE for electronic structure calculations. Our ClusterVQE algorithm splits the initial qubit space into clusters which are further distributed on individual (shallower) quantum circuits. The clusters are obtained based on mutual information reflecting maximal entanglement between qubits, whereas inter-cluster correlation is taken into account via a new “dressed” Hamiltonian. ClusterVQE therefore allows exact simulation of the problem by using fewer qubits and shallower circuit depth at the cost of additional classical resources, making it a potential leader for quantum chemistry simulations on NISQ devices. Proof-of-principle demonstrations are presented for several molecular systems based on quantum simulators as well as IBM quantum devices.
Variational Quantum Eigensolvers (VQEs) are a powerful class of hybrid quantum-classical algorithms designed to approximate the ground state of a quantum system described by its Hamiltonian. VQEs hold promise for various applications, including lattice field theory. However, the inherent noise of Noisy Intermediate-Scale Quantum (NISQ) devices poses a significant challenge for running VQEs as these algorithms are particularly susceptible to noise, e.g., measurement shot noise and hardware noise. In a recent work, it was proposed to enhance the classical optimization of VQEs with Gaussian Processes (GPs) and Bayesian Optimization, as these machine-learning techniques are well-suited for handling noisy data. In these proceedings, we provide additional insights into this new algorithm and present further numerical experiments. In particular, we examine the impact of hardware noise and error mitigation on the algorithm's performance. We validate the algorithm using classical simulations of quantum hardware, including hardware noise benchmarks, which have not been considered in previous works. Our numerical experiments demonstrate that GP-enhanced algorithms can outperform state-of-the-art baselines, laying the foundation for future research on deploying these techniques to real quantum hardware and lattice field theory setups.
The variational quantum eigensolver (VQE) is a promising algorithm for demonstrating quantum advantage in the noisy intermediate-scale quantum (NISQ) era. However, optimizing VQE from random initial starting parameters is challenging due to a variety of issues including barren plateaus, optimization in the presence of noise, and slow convergence. While simulating quantum circuits classically is generically difficult, classical computing methods have been developed extensively, and powerful tools now exist to approximately simulate quantum circuits. This opens up various strategies that limit the amount of optimization that needs to be performed on quantum hardware. Here we present and benchmark an approach where we find good starting parameters for parameterized quantum circuits by classically simulating VQE by approximating the parameterized quantum circuit (PQC) as a matrix product state (MPS) with a limited bond dimension. Calling this approach the variational tensor network eigensolver (VTNE), we apply it to the 1D and 2D Fermi-Hubbard model with system sizes that use up to 32 qubits. We find that in 1D, VTNE can find parameters for PQC whose energy error is within 0.5% relative to the ground state. In 2D, the parameters that VTNE finds have significantly lower energy than their starting configurations, and we show that starting VQE from these parameters requires non-trivially fewer operations to come down to a given energy. The higher the bond dimension we use in VTNE, the less work needs to be done in VQE. By generating classically optimized parameters as the initialization for the quantum circuit one can alleviate many of the challenges that plague VQE on quantum computers.
Quantum computers have the potential to deliver speed-ups for solving certain important problems that are intractable for classical counterparts, making them a promising avenue for advancing modern computation. However, many quantum algorithms require deep quantum circuits, which are challenging to implement on current noisy devices. To address this limitation, variational quantum algorithms (VQAs) have been actively developed, enabling practical quantum computing in the noisy intermediate-scale quantum (NISQ) era. Among them, the variational quantum eigensolver (VQE) stands out as a leading approach for solving problems in quantum chemistry, many-body physics, and even integer factorization. The VQE algorithm can be implemented on various quantum hardware platforms, including photonic systems, quantum dots, trapped ions, neutral atoms, and superconducting circuits. In particular, photonic platforms offer several advantages: they operate at room temperature, exhibit low decoherence, and support multiple degrees of freedom, making them suitable for scalable, high-dimensional quantum computation. Here we present methodologies for realizing VQE on photonic systems, highlighting their potential for practical quantum computing. We first provide a theoretical overview of the VQE framework, focusing on the procedure for variationally estimating ground state energies. We then explore how photonic systems can implement these processes, showing that a wide variety of problems can be addressed using either multiple qubit states or a single qudit state.
Quantum systems have historically been formidable to simulate using classical computational methods, particularly as the system size grows. In recent years, advancements in quantum computing technology have offered new opportunities for tackling complex quantum systems, potentially enabling the study and preparation of quantum states directly on quantum processors themselves. The Variational Quantum Eigensolver (VQE) algorithm is a system composed of a quantum circuit as well as a classical optimizer that can be used to efficiently prepare interesting many-body states on the current noisy intermediate-scale quantum (NISQ) devices. We assess the efficacy and scalability of VQE by preparing the ground states of the 1D generalized Heisenberg model, a pivotal model in understanding magnetic materials. We present an ansatz capable of preparing the ground states for all possible values of the coupling, including the critical states for the anisotropic XXZ model. This paper also aims to provide insights into the precision and time consumption involved in classical and optimized sampling approaches in the calculation of expectation values. In preparing the ground state for the Heisenberg models, this paper paves the way for more efficient quantum algorithms and contributes to the broader field of condensed matter physics.
The variational quantum eigensolver (VQE) is a promising algorithm to demonstrate quantum advantage on near-term noisy-intermediate-scale quantum (NISQ) computers. One central problem of VQE is the effect of noise, especially physical noise, on realistic quantum computers. We systematically study the effect of noise for the VQE algorithm by performing numerical simulations with various local noise models, including amplitude damping, dephasing, and depolarizing noise. We show that the ground state energy will deviate from the exact value as the noise probability increase, and typically, the noise will accumulate as the circuit depth increase. The results suggest that the noisy quantum system can remain entanglement at the noise level of NISQ devices by comparing the VQE solution with the mean-field solution for the many-body ground state problem. We build a noise model to capture the noise in a real quantum computer, and the corresponding numerical simulation is consistent with experimental results on IBM Quantum computers through cloud. Our work sheds new light on the practical research of noisy VQE, and the deep understanding of the noise effect of VQE will also help develop error mitigation techniques on near-term quantum computers.