Among the cost metrics characterizing a quantum circuit, the T -count stands out as one of the most crucial as its minimization is particularly important in various areas of quantum computation such as fault-tolerant quantum computing and quantum circuit simulation. In this work, we contribute to the T -count reduction problem by proposing efficient T -count optimizers with low execution times. In particular, we greatly improve the complexity of TODD, an algorithm currently providing the best T -count reduction on various quantum circuits. We also propose some modifications to the algorithm which are leading to a significantly lower number of T gates. In addition, we propose another algorithm which has an even lower complexity and that achieves a better or equal T -count than the state of the art on most quantum circuits evaluated. We also prove that the number of T gates in the circuit obtained after executing our algorithms on a Hadamard-free circuit composed of n qubits is upper bounded by n ( n + 1 ) / 2 + 1 , which improves on the worst-case T -count of existing optimization algorithms. From this we derive an upper bound of ( n + 1 ) ( n + 2 h ) / 2 + 1 for the number of T gates in a Clifford + T circuit where h is the number of internal Hadamard gates in the circuit, i.e. the number of Hadamard gates lying between the first and the last T gate of the circuit.
Among the cost metrics characterizing a quantum circuit, the T -count stands out as one of the most crucial as its minimization is particularly important in various areas of quantum computation such as fault-tolerant quantum computing and quantum circuit simulation. In this work, we contribute to the T -count reduction problem by proposing efficient T -count optimizers with low execution times. In particular, we greatly improve the complexity of TODD, an algorithm currently providing the best T -count reduction on various quantum circuits. We also propose some modifications to the algorithm which are leading to a significantly lower number of T gates. In addition, we propose another algorithm which has an even lower complexity and that achieves a better or equal T -count than the state of the art on most quantum circuits evaluated. We also prove that the number of T gates in the circuit obtained after executing our algorithms on a Hadamard-free circuit composed of n qubits is upper bounded by n ( n + 1 ) / 2 + 1 , which improves on the worst-case T -count of existing optimization algorithms. From this we derive an upper bound of ( n + 1 ) ( n + 2 h ) / 2 + 1 for the number of T gates in a Clifford + T circuit where h is the number of internal Hadamard gates in the circuit, i.e. the number of Hadamard gates lying between the first and the last T gate of the circuit.
The Clifford+ T gate set is commonly used to perform universal quantum computation. In such setup the T gate is typically much more expensive to implement in a fault-tolerant way than Clifford gates. To improve the feasibility of fault-tolerant quantum computing it is then crucial to minimize the number of T gates. Many algorithms, yielding effective results, have been designed to address this problem. It has been demonstrated that performing a pre-processing step consisting of reducing the number of Hadamard gates in the circuit can help to exploit the full potential of these algorithms and thereby lead to a substantial T -count reduction. Moreover, minimizing the number of Hadamard gates also restrains the number of additional qubits and operations resulting from the gadgetization of Hadamard gates, a procedure used by some compilers to further reduce the number of T gates. In this work we tackle the Hadamard gate reduction problem, and propose an algorithm for synthesizing a sequence of π /4 Pauli rotations with a minimal number of Hadamard gates. Based on this result, we present an algorithm which optimally minimizes the number of Hadamard gates lying between the first and the last T gate of the circuit.
Abstract Before executing a quantum algorithm, one must first decompose the algorithm into machine-level instructions compatible with the architecture of the quantum computer, a process known as quantum compiling. There are many different quantum circuit decompositions for the same algorithm but it is desirable to compile leaner circuits. A fundamentally important cost metric is the T count—the number of T gates in a circuit. For the single qubit case, optimal compiling is essentially a solved problem. However, multi-qubit compiling is a harder problem with optimal algorithms requiring classical runtime exponential in the number of qubits. Here, we present and compare several efficient quantum compilers for multi-qubit Clifford + T circuits. We implemented our compilers in C++ and benchmarked them on random circuits, from which we determine that our TODD compiler yields the lowest T counts on average. We also benchmarked TODD on a library of reversible logic circuits that appear in quantum algorithms and found that it reduced the T count for 97% of the circuits with an average T -count saving of 20% when compared against the best of all previous circuit decompositions.
Optimal Hadamard gate count for Clifford+T synthesis of Pauli rotations sequences
The Clifford+T gate set is commonly used to perform universal quantum computation. In such setup the T gate is typically much more expensive to implement in a fault-tolerant way than Clifford gates. To improve the feasibility of fault-tolerant quantum computing it is then crucial to minimize the number of T gates. Many algorithms, yielding effective results, have been designed to address this problem. It has been demonstrated that performing a pre-processing step consisting of reducing the number of Hadamard gates in the circuit can help to exploit the full potential of these algorithms and thereby lead to a substantial T-count reduction. Moreover, minimizing the number of Hadamard gates also restrains the number of additional qubits and operations resulting from the gadgetization of Hadamard gates, a procedure used by some compilers to further reduce the number of T gates. In this work we tackle the Hadamard gate reduction problem, and propose an algorithm for synthesizing a sequence of π/4 Pauli rotations with a minimal number of Hadamard gates. Based on this result, we present an algorithm which optimally minimizes the number of Hadamard gates lying between the first and the last T gate of the circuit.
We consider quantum circuits composed of Clifford and T gates. In this context the T gate has a special status since it confers universal computation when added to the (classically simulable) Clifford gates. However it can be very expensive to implement fault-tolerantly. We therefore view this gate as a resource which should be used only when necessary. Given an n-qubit unitary U we are interested in computing a circuit that implements it using the minimum possible number of T gates (called the T-count of U). A related task is to decide if the T-count of U is less than or equal to m; we consider this problem as a function of N=2n and m. We provide a classical algorithm which solves it using time and space both upper bounded as O(Nmpoly(m,N)). We implemented our algorithm and used it to show that any Clifford+T circuit for the Toffoli or the Fredkin gate requires at least 7 T gates. This implies that the known 7 T gate circuits for these gates are T-optimal. We also provide a simple expression for the T-count of single-qubit unitaries.
Quantum computers promise exponential speedups for problems in cryptography, chemistry, and optimization. Realizing this promise requires fault tolerance: physical qubits are noisy, so logical qubits must be encoded redundantly across many physical ones using quantum error-correcting codes. In most practical fault-tolerance schemes, T gates cannot be implemented transversally and instead require costly magic-state distillation protocols involving a complex set of operations. As a result, T-gate count can dominate the resource budget of large-scale quantum computations, making T-count minimization a central bottleneck on the path to quantum advantage. Existing T-count optimization tools, however, do not scale to the circuits that quantum advantage demands.
We present theoretical and practical results on T-gate optimization. On the theoretical side, we give a linear-time randomized algorithm for phase folding, based on a novel randomized static analysis. Our static analysis soundly approximates the set of reachable quantum states with an arbitrarily high probability. Our key insight is a static analysis that does not track symbolic expressions, but propagates constant-width bitstrings down the circuit. On the practical side, our implementation, TZAP, is multiple orders of magnitude faster than state-of-the-art tools -- such as PyZX, VOQC, and Feynman -- closely matches their T-count reductions on standard benchmarks, and within seconds on a laptop computer can optimize circuits with millions of gates.
Abstract An important part of reaping computational advantage from a quantum computer is to reduce the quantum resources needed to implement a desired quantum algorithm. Quantum algorithms that are too large to be practical on noisy intermediate scale quantum devices will require fault-tolerant error correction. This work focuses on reducing the physical cost of implementing quantum algorithms when using the state-of-the-art fault-tolerant quantum error correcting codes, in particular, those for which implementing the T gate consumes vastly more resources than the other gates in the gate set. More specifically, in this paper we consider the group of unitaries that can be exactly implemented by a quantum circuit consisting of the Clifford + T gate set. The Clifford + T gate set is a universal gate set and in this group, using state-of-the-art surface codes, the T gate is by far the most expensive component to implement fault-tolerantly. So it is important to minimize the number of T gates necessary for a fault-tolerant implementation. Our primary interest is to compute a circuit for a given n -qubit unitary U , using the minimum possible number of T gates (called the T-count of unitary U ). We consider the problem COUNT-T, the optimization version of which aims to find the T-count of U . In its decision version the goal is to decide if the T-count is at most some positive integer m . Given an oracle for COUNT-T, we can compute a T-count-optimal circuit in time polynomial in the T-count and dimension of U . We give a provable classical algorithm that solves COUNT-T (decision) in time O N 2 ( c − 1 ) ⌈ m c ⌉ p o l y ( m , N ) and space O N 2 ⌈ m c ⌉ p o l y ( m , N ) , where N = 2 n and c ⩾ 2. This gives a space-time trade-off for solving this problem with variants of meet-in-the-middle techniques. We also introduce an asymptotically faster multiplication method that shaves a factor of N 0.7457 off of the overall complexity. Lastly, beyond our improvements to the rigorous algorithm, we give a heuristic algorithm that outputs a T-count-optimal circuit and has space and time complexity poly( m , N ), under some assumptions. In our heuristic algorithm we developed a novel way of pruning the search space. While our heuristic method still scales exponentially with the number of qubits (though with a lower exponent), there is a large improvement by going from exponential to polynomial scaling with m . We implemented our heuristic algorithm with up to 4 qubit unitaries and obtained a significant improvement in time. For all benchmark and random unitaries we studied, the T-count returned by our algorithm is at most the T-count of their circuits shown in previous papers.