Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2407.07552 · Nano Letters

Attojoule Superconducting Thermal Logic and Memories

Hui Wang, Niels Noordzij, M. Yu. Mikhaĭlov, Stephan Steinhauer, Thomas Descamps, Eitan Oksenberg, Val Zwiller, Iman Esmaeil Zadeh

Published Mar 10, 2025• 7 citations
arXivHTMLPDF

Abstract

High Resolution Image Download MS PowerPoint Slide Due to stringent thermal budgets in cryogenic technologies such as superconducting quantum computers and sensors, electronic building blocks that simultaneously offer low energy consumption, fast switching, low error rates, a small footprint, and simple fabrication are pivotal for large-scale devices. Here, we demonstrate a superconducting switch with attojoule switching energy, high speed (pico-second rise/fall times), and high integration density (on the order of 10 –2 μm 2 per switch). It consists of a superconducting nanochannel and a metal heater separated by an insulating silica layer. We experimentally demonstrate digital gate operations utilizing these nanostructures, such as NOT, NAND, NOR, AND, and OR gates, with a few femtojoules of energy consumption and ultralow bit error rates <10 –8 . In addition, we build energy-efficient volatile memory elements with nanosecond operation speeds and a retention time over 10 5 s. These superconducting switches open new possibilities for increasing the size and complexity of modern cryogenic technologies.

DOI
10.1021/acs.nanolett.4c06545

Related papers

Reconfigurable Superconducting Logic Using Multi-Gate Switching of a Nano-Cryotron

Shamiul Alam, Adam N. McCaughan, Ahmedullah Aziz

Superconducting (SC) electronics (SCE) is one of the major requirements to develop a large-scale practical quantum computing system. (Figs. 1(a)) [1]. Currently, a room temperature conventional computer is used as the control processor which requires a huge number of lossy interconnects to connect with the qubits placed at a few millikelvin temperatures. This, in turn, limits the scalability of the quantum computing system up to hundreds of qubits which is not enough to achieve the full potential [2]. Therefore, along with a suitable cryogenic memory, a cryogenic (preferably superconducting) control processor is required to develop a quantum computing system with thousands of qubits. Moreover, SCE offers ultra-fast (hundreds of gigahertz) and highly energy efficient (sub attojoule/bit) performance [3]. Therefore, SCE is projected to achieve the department of energy (DOE) exascale goal which the conventional supercomputers failed to achieve (Fig. 1(b)) [4]. However, Josephson junction-based SC circuits suffer from limited integration density due to flux trapping, difficulty in driving large impedances, fanning out digital signals, and operating in noisy environments [5]. To address these existing issues, here, we present a novel reconfigurable SC logic circuit using a nano-cryotron (nTron) that can perform 1-input copy, 2-input AND and OR, and 3-input majority logic functionalities. This work can enable the implementation of highly scalable and energy-efficient SC processor since the use of only one device. To achieve the reconfigurable nature of the logic circuit, we utilize the multi-gate switching of nTron.

Conference digest•Jun 25, 2023•5 citations

Superconducting memories employing Josephson devices

W. Anacker

Experimental superconducting Josephson devices being investigated for use in digital logic and memory circuits have been demonstrated to switch in the 10 to 100 picosecond (1 picosecond = 10-12 sec) range. Projections based on the operation of individual logic circuits indicate that they may surpass semiconductor circuits in very high performance CPU's. This potential is based on the fact that these circuits dissipate extremely little energy, on the order of 10 to 1000 attojoules (attojoule = 10-18 joule), while operating with subnanosecond delays. It should, therefore, be possible to package Josephson devices very densely and interconnect them by properly terminated superconducting transmission lines so that the fast switching speed of individual circuits is retained throughout large logic networks.

AFIPS National Computer Conference (NCC)•Jan 1, 1975•2 citations

Superconducting memories employing Josephson devices

W. Anacker

Experimental superconducting Josephson devices being investigated for use in digital logic and memory circuits have been demonstrated to switch in the 10 to 100 picosecond (1 picosecond = 10-12 sec) range. Projections based on the operation of individual logic circuits indicate that they may surpass semiconductor circuits in very high performance CPU's. This potential is based on the fact that these circuits dissipate extremely little energy, on the order of 10 to 1000 attojoules (attojoule = 10-18 joule), while operating with subnanosecond delays. It should, therefore, be possible to package Josephson devices very densely and interconnect them by properly terminated superconducting transmission lines so that the fast switching speed of individual circuits is retained throughout large logic networks.

afips•Dec 30, 1899•0 citations

Potential of superconductive josephson tunneling technology for ultrahigh performance memories and processors

W. Anacker

The potential of a new technology, based on the superconducting Josephson tunneling effect, has been assessed for use in high-speed computer systems. Josephson tunneling circuits for memory and logic functions can be switched at sub-nanosecond delay, do not require standby power, and dissipate extremely low energy, typically less than 10-13joule during fast switching operation. High-speed circuits with high packing densities, not limited by power dissipation problems, can therefore be expected. Low thermal noise at cryogenic temperatures ensures reliable operation despite the low energy switching signal. Practically lossless signal transmission via superconducting lines can be exploited for high-speed operation even when sizeable memory and logic modules are assembled. Two random access memory modules have been designed on the basis of single device experiments. Operational characteristics leading to the conclusion that 30 Mbit capacity, less than 1 watt refrigeration requirement (at 3.6° K) and cycle times of 40 ns (in one case) and 15 ns (in the second case), can be achieved are presented.

IEEE Transactions on Magnetics•Dec 1, 1969•72 citations

Cryogenic Memory Array based on Ferroelectric SQUID and Heater Cryotron

Shamiul Alam, Md Mazharul Islam, Md Shafayat Hossain +3 more

Cryogenic (cryo) memory devices, designed to operate at/below 4 Kelvin (K) temperature, is a prime enabler of practical quantum computing systems, and superconducting (SC) electronic platforms (Figs. 1(a), (b)) [1]. The state-of-the-art quantum algorithms require many arbitrary rotations which demand a large memory to store program instructions [2]. SC qubits (used in most of the existing quantum computing systems) are highly sensitive to noise and hence, to protect the qubit states from thermal disturbances, they are placed at a few milli-Kelvin (mK) temperature. Furthermore, to preserve the integrity of the quantum states, the SC qubits undergo continuous error correction schemes, requiring extensive memory and bandwidth [2]. Superconducting electronics (SCE) (targeted towards space applications, and high-performance computing) outperforms the conventional CMOS counterparts in terms of speed and energy-efficiency (Fig. 1(c)) [3]. Decades of research efforts have given rise to three major categories (and several sub-variants) of cryo-memories based on SC, non-SC, and hybrid technologies (Fig. 2) [2], [4]–[6]. However, the existing variants suffer from one or more of the following challenges - (i) limited scalability, (ii) process complexity, (iii) bulky peripherals, (iv) array-level interference, (v) volatility, and (vi) speed incompatibility. Therefore, a scalable cryo-memory system remains elusive. To address these existing issues, here, we present a novel cryo-memory system utilizing -(i) the polarization-induced Cooper-pair [7] modulation in a ferroelectric$(FE)$superconducting quantum interference device (SQUID) (Fig. 3(a)) [8], and (ii) current controlled$SC\leftrightarrow non-SC$switching in a heater cryotron$(hTron)$(Fig. 4) [4]. Discrete prototypes of these devices have been demonstrated recently, but their coupled interactions (which we harness in our work) were never explored before.

Conference digest•Jun 26, 2022•22 citations

A Superconducting Binary Encoder with Multigate Nanowire Cryotrons

Kai Zheng, Qingyuan Zhao, Hai-Yang-Bo Lu +11 more

Abstract Many classic and quantum devices need to operate at cryogenic temperatures, demanding advanced cryogenic digital electronics for processing the input and output signals on a chip to extend their scalability and performance. Here, we report a superconducting binary encoder with ultralow power dissipation and ultracompact size. We introduce a multigate superconducting nanowire cryotron (nTron) that functions as an 8-input OR gate within a footprint of approximately 0.5 μm2. Four cryotrons compose a 4-bit encoder that has a bias margin of 18.9%, an operation speed greater than 250 MHz, an average switching jitter of 75 ps, and a power dissipation of less than 1 μW. We apply this encoder to read out a superconducting-nanowire single-photon detector array whose pixel location is digitized into a 4-bit binary address. The small size of the nanowire combined with the low power dissipation makes nTrons promising for future monolithic integration.

Nano Letters•Apr 14, 2020•27 citations
High Resolution Image Download MS PowerPoint Slide Due to stringent thermal budgets in cryogenic technologies such as superconducting quantum computers and sensors, electronic building blocks that simultaneously offer low energy consumption, fast switching, low error rates, a small footprint, and simple fabrication are pivotal for large-scale devices. Here, we demonstrate a superconducting switch with attojoule switching energy, high speed (pico-second rise/fall times), and high integration density (on the order of 10 –2 μm 2 per switch). It consists of a superconducting nanochannel and a metal heater separated by an insulating silica layer. We experimentally demonstrate digital gate operations utilizing these nanostructures, such as NOT, NAND, NOR, AND, and OR gates, with a few femtojoules of energy consumption and ultralow bit error rates <10 –8 . In addition, we build energy-efficient volatile memory elements with nanosecond operation speeds and a retention time over 10 5 s. These superconducting switches open new possibilities for increasing the size and complexity of modern cryogenic technologies.
Superconducting (SC) electronics (SCE) is one of the major requirements to develop a large-scale practical quantum computing system. (Figs. 1(a)) [1]. Currently, a room temperature conventional computer is used as the control processor which requires a huge number of lossy interconnects to connect with the qubits placed at a few millikelvin temperatures. This, in turn, limits the scalability of the quantum computing system up to hundreds of qubits which is not enough to achieve the full potential [2]. Therefore, along with a suitable cryogenic memory, a cryogenic (preferably superconducting) control processor is required to develop a quantum computing system with thousands of qubits. Moreover, SCE offers ultra-fast (hundreds of gigahertz) and highly energy efficient (sub attojoule/bit) performance [3]. Therefore, SCE is projected to achieve the department of energy (DOE) exascale goal which the conventional supercomputers failed to achieve (Fig. 1(b)) [4]. However, Josephson junction-based SC circuits suffer from limited integration density due to flux trapping, difficulty in driving large impedances, fanning out digital signals, and operating in noisy environments [5]. To address these existing issues, here, we present a novel reconfigurable SC logic circuit using a nano-cryotron (nTron) that can perform 1-input copy, 2-input AND and OR, and 3-input majority logic functionalities. This work can enable the implementation of highly scalable and energy-efficient SC processor since the use of only one device. To achieve the reconfigurable nature of the logic circuit, we utilize the multi-gate switching of nTron.
Experimental superconducting Josephson devices being investigated for use in digital logic and memory circuits have been demonstrated to switch in the 10 to 100 picosecond (1 picosecond = 10-12 sec) range. Projections based on the operation of individual logic circuits indicate that they may surpass semiconductor circuits in very high performance CPU's. This potential is based on the fact that these circuits dissipate extremely little energy, on the order of 10 to 1000 attojoules (attojoule = 10-18 joule), while operating with subnanosecond delays. It should, therefore, be possible to package Josephson devices very densely and interconnect them by properly terminated superconducting transmission lines so that the fast switching speed of individual circuits is retained throughout large logic networks.
Experimental superconducting Josephson devices being investigated for use in digital logic and memory circuits have been demonstrated to switch in the 10 to 100 picosecond (1 picosecond = 10-12 sec) range. Projections based on the operation of individual logic circuits indicate that they may surpass semiconductor circuits in very high performance CPU's. This potential is based on the fact that these circuits dissipate extremely little energy, on the order of 10 to 1000 attojoules (attojoule = 10-18 joule), while operating with subnanosecond delays. It should, therefore, be possible to package Josephson devices very densely and interconnect them by properly terminated superconducting transmission lines so that the fast switching speed of individual circuits is retained throughout large logic networks.
The potential of a new technology, based on the superconducting Josephson tunneling effect, has been assessed for use in high-speed computer systems. Josephson tunneling circuits for memory and logic functions can be switched at sub-nanosecond delay, do not require standby power, and dissipate extremely low energy, typically less than 10-13joule during fast switching operation. High-speed circuits with high packing densities, not limited by power dissipation problems, can therefore be expected. Low thermal noise at cryogenic temperatures ensures reliable operation despite the low energy switching signal. Practically lossless signal transmission via superconducting lines can be exploited for high-speed operation even when sizeable memory and logic modules are assembled. Two random access memory modules have been designed on the basis of single device experiments. Operational characteristics leading to the conclusion that 30 Mbit capacity, less than 1 watt refrigeration requirement (at 3.6° K) and cycle times of 40 ns (in one case) and 15 ns (in the second case), can be achieved are presented.
Cryogenic (cryo) memory devices, designed to operate at/below 4 Kelvin (K) temperature, is a prime enabler of practical quantum computing systems, and superconducting (SC) electronic platforms (Figs. 1(a), (b)) [1]. The state-of-the-art quantum algorithms require many arbitrary rotations which demand a large memory to store program instructions [2]. SC qubits (used in most of the existing quantum computing systems) are highly sensitive to noise and hence, to protect the qubit states from thermal disturbances, they are placed at a few milli-Kelvin (mK) temperature. Furthermore, to preserve the integrity of the quantum states, the SC qubits undergo continuous error correction schemes, requiring extensive memory and bandwidth [2]. Superconducting electronics (SCE) (targeted towards space applications, and high-performance computing) outperforms the conventional CMOS counterparts in terms of speed and energy-efficiency (Fig. 1(c)) [3]. Decades of research efforts have given rise to three major categories (and several sub-variants) of cryo-memories based on SC, non-SC, and hybrid technologies (Fig. 2) [2], [4]–[6]. However, the existing variants suffer from one or more of the following challenges - (i) limited scalability, (ii) process complexity, (iii) bulky peripherals, (iv) array-level interference, (v) volatility, and (vi) speed incompatibility. Therefore, a scalable cryo-memory system remains elusive. To address these existing issues, here, we present a novel cryo-memory system utilizing -(i) the polarization-induced Cooper-pair [7] modulation in a ferroelectric(FE)(FE)(FE)superconducting quantum interference device (SQUID) (Fig. 3(a)) [8], and (ii) current controlledSC↔non−SCSC\leftrightarrow non-SCSC↔non−SCswitching in a heater cryotron(hTron)(hTron)(hTron)(Fig. 4) [4]. Discrete prototypes of these devices have been demonstrated recently, but their coupled interactions (which we harness in our work) were never explored before.
Abstract Many classic and quantum devices need to operate at cryogenic temperatures, demanding advanced cryogenic digital electronics for processing the input and output signals on a chip to extend their scalability and performance. Here, we report a superconducting binary encoder with ultralow power dissipation and ultracompact size. We introduce a multigate superconducting nanowire cryotron (nTron) that functions as an 8-input OR gate within a footprint of approximately 0.5 μm2. Four cryotrons compose a 4-bit encoder that has a bias margin of 18.9%, an operation speed greater than 250 MHz, an average switching jitter of 75 ps, and a power dissipation of less than 1 μW. We apply this encoder to read out a superconducting-nanowire single-photon detector array whose pixel location is digitized into a 4-bit binary address. The small size of the nanowire combined with the low power dissipation makes nTrons promising for future monolithic integration.