Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2407.02774

Quantum microwave photonic mixer with a large spurious-free dynamic range

Xinghua Li, Yifan Guo, Xiao Xiang, Runai Quan, Mingtao Cao, Ruifang Dong, Tao Liu, Ming Li, Shougang Zhang

Published Jul 3, 2024• 0 citations
arXivHTMLPDF

Abstract

As one of the most fundamental functionalities of microwave photonics, microwave frequency mixing plays an essential role in modern radars and wireless communication systems. However, the commonly utilized intensity modulation in the systems often leads to inadequate spurious-free dynamic range (SFDR) for many sought-after applications. Quantum microwave photonics technique offers a promising solution for improving SFDR in terms of higher-order harmonic distortion. In this paper, we demonstrate two types of quantum microwave photonic mixers based on the configuration of the intensity modulators: cascade-type and parallel-type. Leveraging the nonlocal RF signal encoding capability, both types of quantum microwave photonic mixers not only exhibit the advantage of dual-channel output but also present significant improvement in SFDR. Specifically, the parallel-type quantum microwave photonic mixer achieves a remarkable SFDR value of 113.6 dB.Hz1/2, which is 30 dB better than that of the cascade-type quantum microwave photonic mixer. When compared to the classical microwave photonic mixer, this enhancement reaches a notable 53.6 dB at the expense of 8 dB conversion loss. These results highlight the superiority of quantum microwave photonic mixers in the fields of microwave and millimeter-wave systems. Further applying multi-photon frequency entangled sources as optical carriers, the dual-channel microwave frequency conversion capability endowed by the quantum microwave photonic mixer can be extended to enhance the performance of multiple-paths microwave mixing which is essential for radar net systems.

DOI
10.48550/arxiv.2407.02774

Related papers

Quantum microwave photonic mixer featuring high linearity and dual outputs

Xinghua Li, Yifan Guo, Xiao Xiang +7 more

Microwave frequency mixing is a fundamental functionality in microwave photonics, playing a crucial role in modern radar and wireless communication systems. Classical microwave photonic mixers require both the radio frequency (rf) signal and the local oscillator to be loaded onto the same optical light source, thereby impeding their capability in the context of distributed microwave systems. Using time-energy--entangled biphotons as the optical carrier, the quantum microwave photonic (QMWP) mixer offers a promising solution for attaining nonlocal mixing and surmounting such limitations. In this paper, we explore two types of QMWP mixer based on the configuration of the intensity modulators: cascade type and parallel type. Both QMWP mixers feature the properties of high linearity and dual outputs, with their spurious-free dynamic ranges being identical to that of the equivalent classical microwave photonic mixer. Specifically, the parallel-type QMWP mixer can nonlocally mix two physically separated rf signals, demonstrating its superiority in distributed microwave and millimeter-wave radar systems. Further, by application of multiphoton frequency-entangled sources as optical carriers, the nonlocal microwave frequency conversion capability endowed by the QMWP mixer can be extended to enhance the performance of multiple-path microwave mixing, which is essential for radar net systems.

Physical Review Applied•Jan 30, 2025•1 citation

Quantum microwave photonics in radio-over-fiber systems

Yaqing Jin, Yang Ye, Huibo Hong +7 more

As the main branch of microwave photonics, radio-over-fiber technology provides high bandwidth, low-loss, and long-distance propagation capability, facilitating wide applications ranging from telecommunication to wireless networks. With ultrashort pulses as the optical carrier, a large capacity is further endowed. However, the wide bandwidth of ultrashort pulses results in the severe vulnerability of high-frequency radio frequency (RF) signals to fiber dispersion. With a time-energy entangled biphoton source as the optical carrier combined with the single-photon detection technique, a quantum microwave photonics method in radio-over-fiber systems is proposed and demonstrated experimentally. The results show that it not only realizes unprecedented nonlocal RF signal modulation with strong resistance to the dispersion but also provides an alternative mechanism to distill the RF signal out from the dispersion effectively. Furthermore, the spurious-free dynamic ranges of the nonlocally modulated and distilled RF signals have been significantly improved. With the ultra-weak detection and the high-speed processing advantages endowed by the low-timing-jitter single-photon detection, the quantum microwave photonics method opens new possibilities in modern communication and networks.

Photonics Research•May 19, 2022•16 citations

A proof-of-principle demonstration of quantum microwave photonics

Yaqing Jin, Ye Yang, Huibo Hong +7 more

With the rapid development of microwave photonics, which has expanded to numerous applications of commercial importance, eliminating the emerging bottlenecks becomes of vital importance. For example, as the main branch of microwave photonics, radio-over-fiber technology provides high bandwidth, low-loss, and long-distance propagation capability, facilitating wide applications ranging from telecommunication to wireless networks. With ultrashort pulses as the optical carrier, huge capacity is further endowed. However, the wide bandwidth of ultrashort pulses results in the severe vulnerability of high-frequency RF signals to fiber dispersion. With a time-energy entangled biphoton source as the optical carrier and combined with the single-photon detection technique, a quantum microwave photonics method is proposed and demonstrated experimentally. The results show that it not only realizes unprecedented nonlocal RF signal modulation with strong resistance to the dispersion associated with ultrashort pulse carriers but provides an alternative mechanism to effectively distill the RF signal out from the dispersion. Furthermore, the spurious-free dynamic range of both the nonlocally modulated and distilled RF signals has been significantly improved. With the ultra-weak detection and high-speed processing advantages endowed by the low-timing-jitter single-photon detection, the quantum microwave photonics method opens up new possibilities in modern communication and networks.

arXiv:2201.12106•Jan 28, 2022•2 citations

Surpassing the classical limit of the microwave photonic frequency fading effect by quantum microwave photonics

Yaqing Jin, Ye Yang, Huibo Hong +7 more

With energy–time entangled biphoton sources as the optical carrier and time-correlated single-photon detection for high-speed radio frequency (RF) signal recovery, the method of quantum microwave photonics (QMWP) has presented the unprecedented potential of nonlocal RF signal encoding and efficient RF signal distilling from the dispersion interference associated with ultrashort pulse carriers. In this paper, its capability in microwave signal processing and prospective superiority are further demonstrated. Both QMWP RF phase shifting and transversal filtering functionality, which are the fundamental building blocks of microwave signal processing, are realized. Besides good immunity to the dispersion-induced frequency fading effect associated with the broadband carrier in classical MWP, a native two-dimensional parallel microwave signal processor is provided. These results well demonstrate the superiority of QMWP over classical MWP and open the door to new application fields of MWP involving encrypted processing.

arXiv:2211.03110•Photonics Research•Apr 24, 2023•7 citations

Versatile quantum microwave photonic signal processing platform based on coincidence window selection technique

Xinghua Li, Yifan Guo, Xiao Xiang +6 more

Quantum microwave photonics (QMWP) is an innovative approach that combines energy–time entangled biphoton sources as the optical carrier with time-correlated single-photon detection for high-speed radio frequency (RF) signal recovery. This groundbreaking method offers unique advantages, such as nonlocal RF signal encoding and robust resistance to dispersion-induced frequency fading. We explore the versatility of processing the quantum microwave photonic signal by utilizing coincidence window selection on the biphoton coincidence distribution. The demonstration includes finely tunable RF phase shifting, flexible multitap transversal filtering (with up to 14 taps), and photonically implemented RF mixing, leveraging the nonlocal RF mapping characteristic of QMWP. These accomplishments significantly enhance the capability of microwave photonic systems in processing ultraweak signals, opening up new possibilities for various applications.

arXiv:2407.02787•Advanced Photonics Nexus•Jul 31, 2024•1 citation

Nondegenerate Josephson Mixers with Enhanced Bandwidth and Saturation Power for Quantum Signal Amplification and Transduction

Baleegh Abdo, Dongbing Shao, Shayne Cairns +6 more

Nondegenerate Josephson mixers (JMs), formed by coupling two different transmission-line resonators to Josephson ring modulators (JRMs), are vital and versatile devices capable of processing microwave signals at the quantum limit. Owing to the lossless nondegenerate three-wave mixing process enabled by the JRM, JMs can perform phase-preserving amplification of quantum signals, generate two-mode squeezed states, and perform noiseless frequency conversion. However, due to their limited bandwidth and saturation power, such resonator-based JMs are generally unable to simultaneously process frequency-multiplexed signals required in large quantum processors. To overcome this longstanding dual challenge, we redesign the JRM parameters by optimizing its inductances to suppress higher order mixing products and engineer its electromagnetic environment by incorporating lumped-element coupled-mode networks between the JRM and the two distinct ports of the JM. By implementing these strategies, we measure for JMs realized with four coupled modes per port, operated in amplification (conversion), bandwidths of about 400 MHz (700 MHz) with power reflections above 10 dB (below − 10 dB) and saturation powers of about − 110 dBm at 15 dB ( − 91 dBm at − 26 dB). Similarly, we demonstrate for a low external quality factor resonant-mode JM operated in conversion, a maximum bandwidth of about 670 MHz with power reflections below − 10 dB and a maximum saturation power of about − 86 dBm at − 17 dB. Such nondegenerate JMs with enhanced bandwidths and saturation powers could serve in a variety of frequency-multiplexed settings ranging from high-fidelity qubit readout and unidirectional routing of quantum signals to the generation of remote entanglement with continuous variables.

arXiv:2508.06636•PRX Quantum•Apr 22, 2026•1 citation
As one of the most fundamental functionalities of microwave photonics, microwave frequency mixing plays an essential role in modern radars and wireless communication systems. However, the commonly utilized intensity modulation in the systems often leads to inadequate spurious-free dynamic range (SFDR) for many sought-after applications. Quantum microwave photonics technique offers a promising solution for improving SFDR in terms of higher-order harmonic distortion. In this paper, we demonstrate two types of quantum microwave photonic mixers based on the configuration of the intensity modulators: cascade-type and parallel-type. Leveraging the nonlocal RF signal encoding capability, both types of quantum microwave photonic mixers not only exhibit the advantage of dual-channel output but also present significant improvement in SFDR. Specifically, the parallel-type quantum microwave photonic mixer achieves a remarkable SFDR value of 113.6 dB.Hz1/2, which is 30 dB better than that of the cascade-type quantum microwave photonic mixer. When compared to the classical microwave photonic mixer, this enhancement reaches a notable 53.6 dB at the expense of 8 dB conversion loss. These results highlight the superiority of quantum microwave photonic mixers in the fields of microwave and millimeter-wave systems. Further applying multi-photon frequency entangled sources as optical carriers, the dual-channel microwave frequency conversion capability endowed by the quantum microwave photonic mixer can be extended to enhance the performance of multiple-paths microwave mixing which is essential for radar net systems.
Microwave frequency mixing is a fundamental functionality in microwave photonics, playing a crucial role in modern radar and wireless communication systems. Classical microwave photonic mixers require both the radio frequency (rf) signal and the local oscillator to be loaded onto the same optical light source, thereby impeding their capability in the context of distributed microwave systems. Using time-energy--entangled biphotons as the optical carrier, the quantum microwave photonic (QMWP) mixer offers a promising solution for attaining nonlocal mixing and surmounting such limitations. In this paper, we explore two types of QMWP mixer based on the configuration of the intensity modulators: cascade type and parallel type. Both QMWP mixers feature the properties of high linearity and dual outputs, with their spurious-free dynamic ranges being identical to that of the equivalent classical microwave photonic mixer. Specifically, the parallel-type QMWP mixer can nonlocally mix two physically separated rf signals, demonstrating its superiority in distributed microwave and millimeter-wave radar systems. Further, by application of multiphoton frequency-entangled sources as optical carriers, the nonlocal microwave frequency conversion capability endowed by the QMWP mixer can be extended to enhance the performance of multiple-path microwave mixing, which is essential for radar net systems.
As the main branch of microwave photonics, radio-over-fiber technology provides high bandwidth, low-loss, and long-distance propagation capability, facilitating wide applications ranging from telecommunication to wireless networks. With ultrashort pulses as the optical carrier, a large capacity is further endowed. However, the wide bandwidth of ultrashort pulses results in the severe vulnerability of high-frequency radio frequency (RF) signals to fiber dispersion. With a time-energy entangled biphoton source as the optical carrier combined with the single-photon detection technique, a quantum microwave photonics method in radio-over-fiber systems is proposed and demonstrated experimentally. The results show that it not only realizes unprecedented nonlocal RF signal modulation with strong resistance to the dispersion but also provides an alternative mechanism to distill the RF signal out from the dispersion effectively. Furthermore, the spurious-free dynamic ranges of the nonlocally modulated and distilled RF signals have been significantly improved. With the ultra-weak detection and the high-speed processing advantages endowed by the low-timing-jitter single-photon detection, the quantum microwave photonics method opens new possibilities in modern communication and networks.
With the rapid development of microwave photonics, which has expanded to numerous applications of commercial importance, eliminating the emerging bottlenecks becomes of vital importance. For example, as the main branch of microwave photonics, radio-over-fiber technology provides high bandwidth, low-loss, and long-distance propagation capability, facilitating wide applications ranging from telecommunication to wireless networks. With ultrashort pulses as the optical carrier, huge capacity is further endowed. However, the wide bandwidth of ultrashort pulses results in the severe vulnerability of high-frequency RF signals to fiber dispersion. With a time-energy entangled biphoton source as the optical carrier and combined with the single-photon detection technique, a quantum microwave photonics method is proposed and demonstrated experimentally. The results show that it not only realizes unprecedented nonlocal RF signal modulation with strong resistance to the dispersion associated with ultrashort pulse carriers but provides an alternative mechanism to effectively distill the RF signal out from the dispersion. Furthermore, the spurious-free dynamic range of both the nonlocally modulated and distilled RF signals has been significantly improved. With the ultra-weak detection and high-speed processing advantages endowed by the low-timing-jitter single-photon detection, the quantum microwave photonics method opens up new possibilities in modern communication and networks.
With energy–time entangled biphoton sources as the optical carrier and time-correlated single-photon detection for high-speed radio frequency (RF) signal recovery, the method of quantum microwave photonics (QMWP) has presented the unprecedented potential of nonlocal RF signal encoding and efficient RF signal distilling from the dispersion interference associated with ultrashort pulse carriers. In this paper, its capability in microwave signal processing and prospective superiority are further demonstrated. Both QMWP RF phase shifting and transversal filtering functionality, which are the fundamental building blocks of microwave signal processing, are realized. Besides good immunity to the dispersion-induced frequency fading effect associated with the broadband carrier in classical MWP, a native two-dimensional parallel microwave signal processor is provided. These results well demonstrate the superiority of QMWP over classical MWP and open the door to new application fields of MWP involving encrypted processing.
Quantum microwave photonics (QMWP) is an innovative approach that combines energy–time entangled biphoton sources as the optical carrier with time-correlated single-photon detection for high-speed radio frequency (RF) signal recovery. This groundbreaking method offers unique advantages, such as nonlocal RF signal encoding and robust resistance to dispersion-induced frequency fading. We explore the versatility of processing the quantum microwave photonic signal by utilizing coincidence window selection on the biphoton coincidence distribution. The demonstration includes finely tunable RF phase shifting, flexible multitap transversal filtering (with up to 14 taps), and photonically implemented RF mixing, leveraging the nonlocal RF mapping characteristic of QMWP. These accomplishments significantly enhance the capability of microwave photonic systems in processing ultraweak signals, opening up new possibilities for various applications.
Nondegenerate Josephson mixers (JMs), formed by coupling two different transmission-line resonators to Josephson ring modulators (JRMs), are vital and versatile devices capable of processing microwave signals at the quantum limit. Owing to the lossless nondegenerate three-wave mixing process enabled by the JRM, JMs can perform phase-preserving amplification of quantum signals, generate two-mode squeezed states, and perform noiseless frequency conversion. However, due to their limited bandwidth and saturation power, such resonator-based JMs are generally unable to simultaneously process frequency-multiplexed signals required in large quantum processors. To overcome this longstanding dual challenge, we redesign the JRM parameters by optimizing its inductances to suppress higher order mixing products and engineer its electromagnetic environment by incorporating lumped-element coupled-mode networks between the JRM and the two distinct ports of the JM. By implementing these strategies, we measure for JMs realized with four coupled modes per port, operated in amplification (conversion), bandwidths of about 400 MHz (700 MHz) with power reflections above 10 dB (below − 10 dB) and saturation powers of about − 110 dBm at 15 dB ( − 91 dBm at − 26 dB). Similarly, we demonstrate for a low external quality factor resonant-mode JM operated in conversion, a maximum bandwidth of about 670 MHz with power reflections below − 10 dB and a maximum saturation power of about − 86 dBm at − 17 dB. Such nondegenerate JMs with enhanced bandwidths and saturation powers could serve in a variety of frequency-multiplexed settings ranging from high-fidelity qubit readout and unidirectional routing of quantum signals to the generation of remote entanglement with continuous variables.