Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2406.19751 · Nature Communications

Mixing of counterpropagating signals in a traveling-wave Josephson device

Matthieu Praquin, Anthony Giraudo, Vincent Lienhard, T. Bouwakdh, Aron Vanselow, Zaki Leghtas, Philippe Campagne-Ibarcq

Published Dec 12, 2025• 2 citations
arXivHTMLPDF

Abstract

Light waves do not interact in vacuum but can mix in nonlinear media. A strong pump wave can thus convert the frequency of a weaker signal, provided energy and momentum are conserved. These conditions are typically satisfied when all waves propagate with comparable phase velocity along a given axis. Here, we investigate an alternative scheme by which a microwave signal propagating along a one-dimensional Josephson metamaterial is converted into a counter-propagating wave through interaction with a slower pump. In this regime, the input wave is exponentially attenuated, enabling an on-chip microwave isolator reconfigurable into a reciprocal, tunable coupler. The device’s operating mode and working frequency can be selected in situ over a broad microwave range. We measure isolation exceeding 5 dB in the 5-8.5 GHz range and 10 dB in the 7-8.5 GHz range, with a typical 200 MHz bandwidth. Further improvements are expected through design optimization and reduced fabrication disorder, opening new possibilities for microwave routing and processing in superconducting circuits. Wave-mixing is investigated in a Josephson traveling-wave device supporting two modes of propagation. A phase-matched conversion process between counterpropagting waves is leveraged to implement a robust on-chip circulator and tunable coupler.

DOI
10.1038/s41467-025-66190-0

Related papers

Widely Tunable On-Chip Microwave Circulator for Superconducting Quantum Circuits

Benjamin J. Chapman, Eric I. Rosenthal, Joseph Kerckhoff +7 more

We report on the design and performance of an on-chip microwave circulator with a widely (GHz) tunable operation frequency.Nonreciprocity is created with a combination of frequency conversion and delay, and requires neither permanent magnets nor microwave bias tones, allowing on-chip integration with other superconducting circuits without the need for high-bandwidth control lines.Isolation in the device exceeds 20 dB over a bandwidth of tens of MHz, and its insertion loss is small, reaching as low as 0.9 dB at select operation frequencies.Furthermore, the device is linear with respect to input power for signal powers up to hundreds of fW (≈10 3 circulating photons), and the direction of circulation can be dynamically reconfigured.We demonstrate its operation at a selection of frequencies between 4 and 6 GHz.

arXiv:1707.04565•Physical Review X•Nov 22, 2017•141 citations

Widely Tunable On-Chip Microwave Circulator for Superconducting Quantum Circuits

Benjamin J. Chapman, Eric I. Rosenthal, Joseph Kerckhoff +6 more

This thesis develops theory for and experimentally demonstrates a new way to break Lorentz reciprocity—the symmetry, in an electrical network, under exchange of source and detector. The approach is based on the sequential application of frequency conversion and delay; as frequency and time are Fourier duals, these operations do not generally commute. We apply this method in the construction of an on-chip superconducting microwave circulator, a critical component for the unidirectional routing of quantum information in superconducting networks. The device requires neither permanent magnets nor microwave control tones, allowing on-chip integration with other superconducting circuits without expensive control hardware. Isolation in the device exceeds 20 dB over a bandwidth of tens of MHz, and its insertion loss is small, reaching as low as 0.9 dB at select operation frequencies. Furthermore, the device is linear with respect to input power for signal powers up to many hundreds of fW (~103 circulating photons), and the direction of circulation can be dynamically reconfigured. We demonstrate its tunability with operation at a selection of frequencies between 4 and 6 GHz. Given the current status of quantum error-correction and architectures for quantum information processing with superconducting circuits, such scalable non-reciprocal devices will almost certainly be necessary for construction of a superconducting quantum computer intended to be more than a proof-of-principle.

•Nov 22, 2017•133 citations

Broadband Microwave Isolation with Adiabatic Mode Conversion in Coupled Superconducting Transmission Lines

Mahdi Naghiloo, Kaidong Peng, Yufeng Ye +2 more

We propose a traveling wave scheme for broadband microwave isolation using parametric mode conversion in conjunction with adiabatic phase matching technique in a pair of coupled nonlinear transmission lines. This scheme is compatible with the circuit quantum electrodynamics architecture (cQED) and provides isolation without introducing additional quantum noise. We first present the scheme in a general setting then propose an implementation with Josephson junction transmission lines. Numerical simulation shows more than 20 dB isolation over an octave bandwidth (4-8\,GHz) in a 2000 unit cell device with less than 0.05 dB insertion loss dominated by dielectric loss.

arXiv:2103.07793•Mar 13, 2021•8 citations

A fast and large bandwidth superconducting variable coupler

H.-S. Chang, K. J. Satzinger, Y. P. Zhong +8 more

Variable microwave-frequency couplers are highly useful components in classical communication systems and likely will play an important role in quantum communication applications. Conventional semiconductor-based microwave couplers have been used with superconducting quantum circuits, enabling, for example, the in situ measurements of multiple devices via a common readout chain. However, the semiconducting elements are lossy and furthermore dissipate energy when switched, making them unsuitable for cryogenic applications requiring rapid, repeated switching. Superconducting Josephson junction-based couplers can be designed for dissipation-free operation with fast switching and are easily integrated with superconducting quantum circuits. These enable on-chip, quantum-coherent routing of microwave photons, providing an appealing alternative to semiconductor switches. Here, we present and characterize a chip-based broadband microwave variable coupler, tunable over 4–8 GHz with over 1.5 GHz instantaneous bandwidth, based on the superconducting quantum interference device with two parallel Josephson junctions. The coupler is dissipation-free and features large on-off ratios in excess of 40 dB, and the coupling can be changed in about 10 ns. The simple design presented here can be readily integrated with superconducting qubit circuits and can be easily generalized to realize a four- or more port device.

arXiv:2011.09442•Applied Physics Letters•Dec 14, 2020•10 citations

Self-phase-matched broadband amplification with a left-handed Josephson transmission line

C. Kow, Viktor A. Podolskiy, Archana Kamal

Josephson traveling-wave parametric amplifiers (JTWPAs) are promising platforms for realizing broadband quantum-limited amplification of microwave signals. However, substantial gain in such systems is attainable only when strict constraints on phase matching of the signal, idler, and pump waves are satisfied---this is rendered particularly challenging in the presence of nonlinear effects, such as self- and cross-phase modulation, which scale with the intensity of propagating signals. In this work, we present a simple JTWPA based on ``left-handed'' (negative-index) nonlinear Josephson metamaterial, which has phase matching native to its design, precluding the need for any complicated circuit or dispersion engineering. The resultant efficiency of the four-wave-mixing process can implement gains in excess of 20 dB over few-gigahertz bandwidths with much shorter lines than previous implementations. Furthermore, the intrinsic phase matching considerably simplifies the JTWPA design and operation compared to the previous implementations based on ``right-handed'' (positive-index) Josephson metamaterials, making the proposed architecture particularly appealing for integration with large superconducting architectures. The left-handed Josephson transmission line introduced here constitutes an alternative modality in distributed Josephson circuits, and forms a crucial piece of the unified framework that can be used to inform the optimal design and operation of broadband microwave amplifiers.

arXiv:2201.04660•Physical Review Applied•Aug 11, 2025•14 citations

Theory of multiwave mixing within the superconducting kinetic-inductance traveling-wave amplifier

Robert P. Erickson, David P. Pappas

Traveling-wave parametric amplifiers may be fabricated from superconducting films that exhibit highly nonlinear kinetic inductance. The coplanar waveguide of such a microwave device, extending to a meter or more in length but compacted to reside on a chip of the order of a square centimeter, is engineered with periodic variations in its width. These width variations, or loadings, alter the dispersion characteristics of a nonlinear current propagating along the waveguide, changing its group velocity and modulation behavior. A strong pump and a small signal injected into one end of the waveguide mix parametrically in the presence of the nonlinear kinetic inductance. Engineered dispersion induces the favorable conditions of overall phase matching, leading to generation of idler products as well as signal amplification of wide bandwidth, high dynamic range, and low noise, making the device of particular use in quantum computing and photon detection. The authors present a theoretical framework in which signal gain may be calculated solely from loading design. This involves construction of a metamaterial band theory of the engineered dispersion, which is used as a basis to describe the mixing of nonlinear traveling waves.

arXiv:1612.00365•Physical review. B./Physical review. B•Mar 6, 2017•38 citations
Light waves do not interact in vacuum but can mix in nonlinear media. A strong pump wave can thus convert the frequency of a weaker signal, provided energy and momentum are conserved. These conditions are typically satisfied when all waves propagate with comparable phase velocity along a given axis. Here, we investigate an alternative scheme by which a microwave signal propagating along a one-dimensional Josephson metamaterial is converted into a counter-propagating wave through interaction with a slower pump. In this regime, the input wave is exponentially attenuated, enabling an on-chip microwave isolator reconfigurable into a reciprocal, tunable coupler. The device’s operating mode and working frequency can be selected in situ over a broad microwave range. We measure isolation exceeding 5 dB in the 5-8.5 GHz range and 10 dB in the 7-8.5 GHz range, with a typical 200 MHz bandwidth. Further improvements are expected through design optimization and reduced fabrication disorder, opening new possibilities for microwave routing and processing in superconducting circuits. Wave-mixing is investigated in a Josephson traveling-wave device supporting two modes of propagation. A phase-matched conversion process between counterpropagting waves is leveraged to implement a robust on-chip circulator and tunable coupler.
We report on the design and performance of an on-chip microwave circulator with a widely (GHz) tunable operation frequency.Nonreciprocity is created with a combination of frequency conversion and delay, and requires neither permanent magnets nor microwave bias tones, allowing on-chip integration with other superconducting circuits without the need for high-bandwidth control lines.Isolation in the device exceeds 20 dB over a bandwidth of tens of MHz, and its insertion loss is small, reaching as low as 0.9 dB at select operation frequencies.Furthermore, the device is linear with respect to input power for signal powers up to hundreds of fW (≈10 3 circulating photons), and the direction of circulation can be dynamically reconfigured.We demonstrate its operation at a selection of frequencies between 4 and 6 GHz.
This thesis develops theory for and experimentally demonstrates a new way to break Lorentz reciprocity—the symmetry, in an electrical network, under exchange of source and detector. The approach is based on the sequential application of frequency conversion and delay; as frequency and time are Fourier duals, these operations do not generally commute. We apply this method in the construction of an on-chip superconducting microwave circulator, a critical component for the unidirectional routing of quantum information in superconducting networks. The device requires neither permanent magnets nor microwave control tones, allowing on-chip integration with other superconducting circuits without expensive control hardware. Isolation in the device exceeds 20 dB over a bandwidth of tens of MHz, and its insertion loss is small, reaching as low as 0.9 dB at select operation frequencies. Furthermore, the device is linear with respect to input power for signal powers up to many hundreds of fW (~103 circulating photons), and the direction of circulation can be dynamically reconfigured. We demonstrate its tunability with operation at a selection of frequencies between 4 and 6 GHz. Given the current status of quantum error-correction and architectures for quantum information processing with superconducting circuits, such scalable non-reciprocal devices will almost certainly be necessary for construction of a superconducting quantum computer intended to be more than a proof-of-principle.
We propose a traveling wave scheme for broadband microwave isolation using parametric mode conversion in conjunction with adiabatic phase matching technique in a pair of coupled nonlinear transmission lines. This scheme is compatible with the circuit quantum electrodynamics architecture (cQED) and provides isolation without introducing additional quantum noise. We first present the scheme in a general setting then propose an implementation with Josephson junction transmission lines. Numerical simulation shows more than 20 dB isolation over an octave bandwidth (4-8\,GHz) in a 2000 unit cell device with less than 0.05 dB insertion loss dominated by dielectric loss.
Variable microwave-frequency couplers are highly useful components in classical communication systems and likely will play an important role in quantum communication applications. Conventional semiconductor-based microwave couplers have been used with superconducting quantum circuits, enabling, for example, the in situ measurements of multiple devices via a common readout chain. However, the semiconducting elements are lossy and furthermore dissipate energy when switched, making them unsuitable for cryogenic applications requiring rapid, repeated switching. Superconducting Josephson junction-based couplers can be designed for dissipation-free operation with fast switching and are easily integrated with superconducting quantum circuits. These enable on-chip, quantum-coherent routing of microwave photons, providing an appealing alternative to semiconductor switches. Here, we present and characterize a chip-based broadband microwave variable coupler, tunable over 4–8 GHz with over 1.5 GHz instantaneous bandwidth, based on the superconducting quantum interference device with two parallel Josephson junctions. The coupler is dissipation-free and features large on-off ratios in excess of 40 dB, and the coupling can be changed in about 10 ns. The simple design presented here can be readily integrated with superconducting qubit circuits and can be easily generalized to realize a four- or more port device.
Josephson traveling-wave parametric amplifiers (JTWPAs) are promising platforms for realizing broadband quantum-limited amplification of microwave signals. However, substantial gain in such systems is attainable only when strict constraints on phase matching of the signal, idler, and pump waves are satisfied---this is rendered particularly challenging in the presence of nonlinear effects, such as self- and cross-phase modulation, which scale with the intensity of propagating signals. In this work, we present a simple JTWPA based on ``left-handed'' (negative-index) nonlinear Josephson metamaterial, which has phase matching native to its design, precluding the need for any complicated circuit or dispersion engineering. The resultant efficiency of the four-wave-mixing process can implement gains in excess of 20 dB over few-gigahertz bandwidths with much shorter lines than previous implementations. Furthermore, the intrinsic phase matching considerably simplifies the JTWPA design and operation compared to the previous implementations based on ``right-handed'' (positive-index) Josephson metamaterials, making the proposed architecture particularly appealing for integration with large superconducting architectures. The left-handed Josephson transmission line introduced here constitutes an alternative modality in distributed Josephson circuits, and forms a crucial piece of the unified framework that can be used to inform the optimal design and operation of broadband microwave amplifiers.
Traveling-wave parametric amplifiers may be fabricated from superconducting films that exhibit highly nonlinear kinetic inductance. The coplanar waveguide of such a microwave device, extending to a meter or more in length but compacted to reside on a chip of the order of a square centimeter, is engineered with periodic variations in its width. These width variations, or loadings, alter the dispersion characteristics of a nonlinear current propagating along the waveguide, changing its group velocity and modulation behavior. A strong pump and a small signal injected into one end of the waveguide mix parametrically in the presence of the nonlinear kinetic inductance. Engineered dispersion induces the favorable conditions of overall phase matching, leading to generation of idler products as well as signal amplification of wide bandwidth, high dynamic range, and low noise, making the device of particular use in quantum computing and photon detection. The authors present a theoretical framework in which signal gain may be calculated solely from loading design. This involves construction of a metamaterial band theory of the engineered dispersion, which is used as a basis to describe the mixing of nonlinear traveling waves.