Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2406.14812 · Progress of Theoretical and Experimental Physics

Berezinskii–Kosterlitz–Thouless Transition of the Two-Dimensional XY Model on the Honeycomb Lattice

Fu-Jiun Jiang

Published Sep 26, 2024• 4 citations
arXivHTMLPDF

Abstract

Abstract The Berezinskii–Kosterlitz–Thouless (BKT) transition of the two-dimensional $XY$ model on the honeycomb lattice is investigated using both the techniques of Neural network (NN) and Monte Carlo simulations. It is demonstrated in the literature that, with certain plausible assumptions, the associated critical temperature $T_{\text{BKT,H}}$ is found to be ${1}/{\sqrt{2}}$ exactly. Surprisingly, the value of $T_{\text{BKT,H}}$ obtained from our NN calculations is 0.572(3), which deviates significantly from ${1}/{\sqrt{2}}$. In addition, based on the helicity modulus, the $T_{\text{BKT,H}}$ determined is 0.576(4), agreeing well with that resulting from the NN estimation. It will be interesting to carry out a more detailed analytic calculation to obtain a theoretical value consistent with the numerical result reached here.

DOI
10.1093/ptep/ptae147

Related papers

Berezinskii-Kosterlitz-Thouless transition in the XY model on the honeycomb lattice: a comprehensive Monte Carlo analysis

Felipe E. F. de Andrade, L. N. Jorge, Cláudio José DaSilva

Abstract In this paper, we thoroughly examined the Berezinskii-Kosterlitz-Thouless (BKT) phase transition in the two-dimensional XY model on the honeycomb lattice. To address its thermodynamical behavior, we combined standard numerical Monte Carlo simulations with the simulated annealing (SA) protocol and entropic simulations based on the Wang-Landau (WL) algorithm. The transition temperature was determined using the second (ϒ) and fourth-order (ϒ4) helicity modulus as the order parameter. Our best finite-size scaling analysis suggests T BKT = 0.575(8) from SA and T BKT = 0.576(3) from WL. These values deviate significantly from the expected theoretical value of 1 / 2 . We believe that this discrepancy suggests that the theoretical assumptions regarding the analytical calculation may need to be revisited. Additionally, we calculated the vortex density and the formation energy of the vortex-antivortex pairs, where the obtained vortex formation energy is 2μ = 5.80(12). Upon comparison with the square lattice, our results support the notion of instability of the honeycomb lattice to support the spin long-range order and give additional backing to the critical behavior we found.

arXiv:2406.12076•Physica Scripta•May 8, 2025•4 citations

BKT transitions of the XY and six-state clock models on the various two-dimensional lattices

Yutaka Okabe, Hiromi Otsuka

Abstract In a two-dimensional (2D) spin system, the XY model, characterized by planar rotational symmetry, exhibits a unique phenomenon known as the Berezinskii-Kosterlitz-Thouless (BKT) transition. In contrast, the clock model, which introduces discrete rotational symmetry, exhibits the BKT transition at two different temperatures due to this discreteness. In this study, we numerically investigate the BKT transition for XY and six-state clock models over various two-dimensional lattices. We employ two primary methods: the Monte Carlo method, which analyzes the size dependence of the ratio of the correlation functions for two different distances, and a machine-learning approach to classify the different phases --- namely, the low-temperature ordered phase, the intermediate BKT phase, and the high-temperature disordered phase. We identify the BKT transition temperatures for the XY and six-state models on honeycomb, kagome, and diced lattices. Combined with the previously calculated data for the triangular lattice, we then compare these values with the second-order phase transition temperatures of the 2D Ising model, for which exact solutions are known. Our results indicate that the ratio of the BKT transition temperatures for each lattice relative to the Ising model transition temperatures are close, although the values are not universal.

Journal of Physics A Mathematical and Theoretical•Jan 13, 2025•0 citations

BKT transitions of the XY and six-state clock models on the various two-dimensional lattices

Yutaka Okabe, Hiromi Otsuka

Abstract In a two-dimensional (2D) spin system, the XY model, characterized by planar rotational symmetry, exhibits a unique phenomenon known as the Berezinskii–Kosterlitz–Thouless (BKT) transition. In contrast, the clock model, which introduces discrete rotational symmetry, exhibits the BKT transition at two different temperatures due to this discreteness. In this study, we numerically investigate the BKT transition for XY and six-state clock models over various 2D lattices. We employ two primary methods: the Monte Carlo method, which analyzes the size dependence of the ratio of the correlation functions for two different distances, and a machine-learning approach to classify the different phases—namely, the low-temperature ordered phase, the intermediate BKT phase, and the high-temperature disordered phase. We identify the BKT transition temperatures for the XY and six-state models on honeycomb, kagome, and diced lattices. Combined with the previously calculated data for the triangular lattice, we then compare these values with the second-order phase transition temperatures of the 2D Ising model, for which exact solutions are known. Our results indicate that the ratio of the BKT transition temperatures for each lattice relative to the Ising model transition temperatures are close, although the values are not universal.

arXiv:2501.07388•Journal of Physics A Mathematical and Theoretical•Jan 17, 2025•7 citations

Berezinskii–Kosterlitz–Thouless Transition – A Universal Neural Network Study with Benchmarks

Y.-H. Tseng, Fu-Jiun Jiang

Using a supervised neural network (NN) trained once on a one-dimensional lattice of 200 sites, we calculate the Berezinskii–Kosterlitz–Thouless phase transitions of the two-dimensional (2D) classical XY and the 2D generalized classical XY models. In particular, both the bulk quantities Binder ratios and the spin states of the studied systems are employed to construct the needed configurations for the NN prediction. By applying semiempirical finite-size scaling to the relevant data, the critical points obtained by the NN approach agree well with the known results established in the literature. This implies that for each of the considered models, the determination of its various phases requires only a little information. The outcomes presented here demonstrate convincingly that the employed universal NN is not only valid for the symmetry breaking related phase transitions, but also works for calculating the critical points of the phase transitions associated with topology. The efficiency of the used NN in the computation is examined by carrying out several detailed benchmark calculations.

arXiv:2110.01344•Results in Physics•Jan 1, 2021•8 citations

Numerical Studies of Vortices and Helicity Modulus in the Two-Dimensional Generalized XY Model

Yunzhou Sun, Qin Wu, Yang Xiao-li +4 more

Two-dimensional generalized XY spin model on a triangular lattice is studied by means of Monte-Carlo simulations. The critical temperatures of Berezinskii-Kosterlitz-Thouless (BKT) phase transition are obtained by the method of helicity modulus. It is found that the results are consistent with those obtained by other methods. The vortex density and the vortex-antivortex pair formation energy are also obtained. The result shows that the critical temperature decreases with the increase of the generalization parameter q . While the vortex-antivortex pair formation energy increases with the increase of q when q>1 .

Frontiers in Physics•Mar 4, 2022•5 citations

Finite-size scaling method for the Berezinskii–Kosterlitz–Thouless transition

Yun-Da Hsieh, Ying-Jer Kao, Anders W. Sandvik

We test an improved finite-size scaling method for reliably extracting the critical temperature T BKT of a Berezinskii–Kosterlitz–Thouless (BKT) transition. Using known single-parameter logarithmic corrections to the spin stiffness ρ s at T BKT in combination with the Kosterlitz–Nelson relation between the transition temperature and the stiffness, ρ s ( T BKT ) = 2 T BKT /π, we define a size-dependent transition temperature T BKT ( L 1 , L 2 ) based on a pair of system sizes L 1 , L 2 , e.g., L 2 = 2 L 1 . We use Monte Carlo data for the standard two-dimensional classical XY model to demonstrate that this quantity is well behaved and can be reliably extrapolated to the thermodynamic limit using the next expected logarithmic correction beyond the ones included in defining T BKT ( L 1 , L 2 ). For the Monte Carlo calculations we use GPU (graphical processing unit) computing to obtain high-precision data for L up to 512. We find that the sub-leading logarithmic corrections have significant effects on the extrapolation. Our result T BKT = 0.8935(1) is several error bars above the previously best estimates of the transition temperature, T BKT ≈ 0.8929. If only the leading log-correction is used, the result is, however, consistent with the lower value, suggesting that previous works have underestimated T BKT because of the neglect of sub-leading logarithms. Our method is easy to implement in practice and should be applicable to generic BKT transitions.

arXiv:1302.2900•Journal of Statistical Mechanics Theory and Experiment•Sep 6, 2013•88 citations
Abstract The Berezinskii–Kosterlitz–Thouless (BKT) transition of the two-dimensional XYXYXY model on the honeycomb lattice is investigated using both the techniques of Neural network (NN) and Monte Carlo simulations. It is demonstrated in the literature that, with certain plausible assumptions, the associated critical temperature TBKT,HT_{\text{BKT,H}}TBKT,H​ is found to be 1/2{1}/{\sqrt{2}}1/2​ exactly. Surprisingly, the value of TBKT,HT_{\text{BKT,H}}TBKT,H​ obtained from our NN calculations is 0.572(3), which deviates significantly from 1/2{1}/{\sqrt{2}}1/2​. In addition, based on the helicity modulus, the TBKT,HT_{\text{BKT,H}}TBKT,H​ determined is 0.576(4), agreeing well with that resulting from the NN estimation. It will be interesting to carry out a more detailed analytic calculation to obtain a theoretical value consistent with the numerical result reached here.
Abstract In this paper, we thoroughly examined the Berezinskii-Kosterlitz-Thouless (BKT) phase transition in the two-dimensional XY model on the honeycomb lattice. To address its thermodynamical behavior, we combined standard numerical Monte Carlo simulations with the simulated annealing (SA) protocol and entropic simulations based on the Wang-Landau (WL) algorithm. The transition temperature was determined using the second (ϒ) and fourth-order (ϒ4) helicity modulus as the order parameter. Our best finite-size scaling analysis suggests T BKT = 0.575(8) from SA and T BKT = 0.576(3) from WL. These values deviate significantly from the expected theoretical value of 1 / 2 . We believe that this discrepancy suggests that the theoretical assumptions regarding the analytical calculation may need to be revisited. Additionally, we calculated the vortex density and the formation energy of the vortex-antivortex pairs, where the obtained vortex formation energy is 2μ = 5.80(12). Upon comparison with the square lattice, our results support the notion of instability of the honeycomb lattice to support the spin long-range order and give additional backing to the critical behavior we found.
Abstract In a two-dimensional (2D) spin system, the XY model, characterized by planar rotational symmetry, exhibits a unique phenomenon known as the Berezinskii-Kosterlitz-Thouless (BKT) transition. In contrast, the clock model, which introduces discrete rotational symmetry, exhibits the BKT transition at two different temperatures due to this discreteness. In this study, we numerically investigate the BKT transition for XY and six-state clock models over various two-dimensional lattices. We employ two primary methods: the Monte Carlo method, which analyzes the size dependence of the ratio of the correlation functions for two different distances, and a machine-learning approach to classify the different phases --- namely, the low-temperature ordered phase, the intermediate BKT phase, and the high-temperature disordered phase. We identify the BKT transition temperatures for the XY and six-state models on honeycomb, kagome, and diced lattices. Combined with the previously calculated data for the triangular lattice, we then compare these values with the second-order phase transition temperatures of the 2D Ising model, for which exact solutions are known. Our results indicate that the ratio of the BKT transition temperatures for each lattice relative to the Ising model transition temperatures are close, although the values are not universal.
Abstract In a two-dimensional (2D) spin system, the XY model, characterized by planar rotational symmetry, exhibits a unique phenomenon known as the Berezinskii–Kosterlitz–Thouless (BKT) transition. In contrast, the clock model, which introduces discrete rotational symmetry, exhibits the BKT transition at two different temperatures due to this discreteness. In this study, we numerically investigate the BKT transition for XY and six-state clock models over various 2D lattices. We employ two primary methods: the Monte Carlo method, which analyzes the size dependence of the ratio of the correlation functions for two different distances, and a machine-learning approach to classify the different phases—namely, the low-temperature ordered phase, the intermediate BKT phase, and the high-temperature disordered phase. We identify the BKT transition temperatures for the XY and six-state models on honeycomb, kagome, and diced lattices. Combined with the previously calculated data for the triangular lattice, we then compare these values with the second-order phase transition temperatures of the 2D Ising model, for which exact solutions are known. Our results indicate that the ratio of the BKT transition temperatures for each lattice relative to the Ising model transition temperatures are close, although the values are not universal.
Using a supervised neural network (NN) trained once on a one-dimensional lattice of 200 sites, we calculate the Berezinskii–Kosterlitz–Thouless phase transitions of the two-dimensional (2D) classical XY and the 2D generalized classical XY models. In particular, both the bulk quantities Binder ratios and the spin states of the studied systems are employed to construct the needed configurations for the NN prediction. By applying semiempirical finite-size scaling to the relevant data, the critical points obtained by the NN approach agree well with the known results established in the literature. This implies that for each of the considered models, the determination of its various phases requires only a little information. The outcomes presented here demonstrate convincingly that the employed universal NN is not only valid for the symmetry breaking related phase transitions, but also works for calculating the critical points of the phase transitions associated with topology. The efficiency of the used NN in the computation is examined by carrying out several detailed benchmark calculations.
Two-dimensional generalized XY spin model on a triangular lattice is studied by means of Monte-Carlo simulations. The critical temperatures of Berezinskii-Kosterlitz-Thouless (BKT) phase transition are obtained by the method of helicity modulus. It is found that the results are consistent with those obtained by other methods. The vortex density and the vortex-antivortex pair formation energy are also obtained. The result shows that the critical temperature decreases with the increase of the generalization parameter q . While the vortex-antivortex pair formation energy increases with the increase of q when q>1 .
We test an improved finite-size scaling method for reliably extracting the critical temperature T BKT of a Berezinskii–Kosterlitz–Thouless (BKT) transition. Using known single-parameter logarithmic corrections to the spin stiffness ρ s at T BKT in combination with the Kosterlitz–Nelson relation between the transition temperature and the stiffness, ρ s ( T BKT ) = 2 T BKT /π, we define a size-dependent transition temperature T BKT ( L 1 , L 2 ) based on a pair of system sizes L 1 , L 2 , e.g., L 2 = 2 L 1 . We use Monte Carlo data for the standard two-dimensional classical XY model to demonstrate that this quantity is well behaved and can be reliably extrapolated to the thermodynamic limit using the next expected logarithmic correction beyond the ones included in defining T BKT ( L 1 , L 2 ). For the Monte Carlo calculations we use GPU (graphical processing unit) computing to obtain high-precision data for L up to 512. We find that the sub-leading logarithmic corrections have significant effects on the extrapolation. Our result T BKT = 0.8935(1) is several error bars above the previously best estimates of the transition temperature, T BKT ≈ 0.8929. If only the leading log-correction is used, the result is, however, consistent with the lower value, suggesting that previous works have underestimated T BKT because of the neglect of sub-leading logarithms. Our method is easy to implement in practice and should be applicable to generic BKT transitions.