Continuous-variable entangled radiation known as Einstein-Podolsky-Rosen (EPR) states are spatially separated quantum states with applications ranging from quantum teleportation and communication to quantum sensing. The ability to efficiently generate and harness EPR states is vital for advancements in quantum technologies, particularly in the microwave domain. Here, we introduce a kinetic inductance quantum-limited amplifier that generates stationary-path-entangled microwave radiation. Unlike traditional Josephson junction circuits, our design offers simplified fabrication and operational advantages. By generating single-mode squeezed states and distributing them to different ports of a microwave resonator, we deterministically create distributed entangled states at the output of the resonator. In addition to the experimental verification of entanglement, we present a simple theoretical model using a beam-splitter picture to describe the generation of path-entangled states in kinetic inductance superconducting circuits. This work highlights the potential of kinetic inductance parametric amplifiers as promising technology for practical applications such as quantum teleportation, distributed quantum computing, and enhanced quantum sensing. Moreover, it can contribute to foundational tests of quantum mechanics and advances in next-generation quantum information technologies.
Continuous-variable entangled radiation known as Einstein-Podolsky-Rosen (EPR) states are spatially separated quantum states with applications ranging from quantum teleportation and communication to quantum sensing. The ability to efficiently generate and harness EPR states is vital for advancements in quantum technologies, particularly in the microwave domain. Here, we introduce a kinetic inductance quantum-limited amplifier that generates stationary-path-entangled microwave radiation. Unlike traditional Josephson junction circuits, our design offers simplified fabrication and operational advantages. By generating single-mode squeezed states and distributing them to different ports of a microwave resonator, we deterministically create distributed entangled states at the output of the resonator. In addition to the experimental verification of entanglement, we present a simple theoretical model using a beam-splitter picture to describe the generation of path-entangled states in kinetic inductance superconducting circuits. This work highlights the potential of kinetic inductance parametric amplifiers as promising technology for practical applications such as quantum teleportation, distributed quantum computing, and enhanced quantum sensing. Moreover, it can contribute to foundational tests of quantum mechanics and advances in next-generation quantum information technologies.
Parametric down-conversion is a widely exploited technique in optics to produce entangled states of photons for quantum information processing and quantum sensing. In the microwave domain, devices based on Josephson junctions, such as Josephson parametric amplifiers and voltage-biased Josephson junctions, have been successfully utilized to generate such states. However, their high susceptibility to magnetic fields has posed challenges in many applications. Here we demonstrate the generation of two-mode squeezed states via four-wave mixing in a superconducting nanowire resonator patterned from NbN. The NbN nanowire exhibits a strong Kerr nonlinearity, resulting in the emission of a signal-idler pair with a cross-correlation of g(2)(0)=11.9. Owing to the magnetic resilience and high critical temperature (Tc) of NbN, our microwave parametric sources based on kinetic inductance promise an expanded range of potential applications.
A quantum-limited amplifier enables the amplification of weak signals while introducing minimal noise dictated by the principles of quantum mechanics. Such amplifiers serve a broad spectrum of applications in quantum computing, including fast and accurate readout of superconducting qubits and spins, as well as various uses in quantum sensing and metrology. Parametric amplification, primarily developed with use of Josephson junctions, has evolved into the leading technology for highly effective microwave measurements within quantum circuits. Despite their significant contributions, these amplifiers face fundamental limitations, such as their inability to handle high powers, their sensitivity to parasitic magnetic fields, and particularly their limitation to operate only at millikelvin temperatures. To tackle these challenges, here we experimentally develop a novel quantum-limited amplifier based on superconducting kinetic inductance and present an extensive theoretical model to describe this nonlinear coupled-mode system. Our device surpasses the conventional constraints associated with Josephson-junction amplifiers by operating at much higher temperatures up to 4.5 K. With two distinct spectral modes and tunability through bias current, this amplifier can operate selectively in both the single-mode-amplification regime and the double-mode-amplification regime near the quantum noise limit. Using a nonlinear thin film exhibiting kinetic inductance, our device attains gain exceeding 50 dB in a single-mode configuration and 32 dB in a double-mode configuration, while adding 0.82 input-referred noise quanta. Importantly, this amplifier eliminates the need for Josephson junctions, resulting in the capability to handle significantly higher powers than Josephson junction--based amplifiers. It also demonstrates resilience in the presence of magnetic fields, offers a straightforward design, and increases reliability. This positions the amplifier as a versatile solution for quantum applications and facilitates its integration into future superconducting quantum computers.
Parametric amplification is essential for quantum measurement, enabling the amplification of weak microwave signals with minimal added noise. While Josephson-junction-based amplifiers have become standard in superconducting quantum circuits, their magnetic sensitivity, limited saturation power, and sub-kelvin operating requirements motivate the development of alternative nonlinear platforms. Here we demonstrate a two-mode kinetic-inductance parametric amplifier based on a pair of capacitively coupled Kerr-nonlinear resonators fabricated from NbTiN and NbN thin films. The distributed Kerr nonlinearity of these materials enables nondegenerate four-wave-mixing amplification with gains approaching 40 dB, gain-bandwidth products up to 6.9 MHz, and 1-dB compression powers two to three orders of magnitude higher than those of state-of-the-art Josephson amplifiers. A coupled-mode theoretical model accurately captures the pump-induced modification of the hybridized modes and quantitatively reproduces the observed signal and idler responses. The NbN device exhibits a significantly larger Kerr coefficient and superior gain-bandwidth performance, highlighting the advantages of high-kinetic-inductance materials. Our results establish coupled kinetic-inductance resonators as a robust platform for broadband, high-power, and magnetically resilient quantum-limited amplification, offering a scalable route for advanced readout in superconducting qubits, spin ensembles, quantum dots, and other microwave-quantum technologies.
Parametric converters are parametric amplifiers that mix two spatially separate nondegenerate modes and are commonly used for amplifying and squeezing microwave signals in quantum computing and sensing. In Josephson parametric converters, the strong localized nonlinearity of the Josephson junction limits the amplification and squeezing, as well as the dynamic range, in current devices. In contrast, a weak distributed nonlinearity can provide higher gain and dynamic range, when implemented as a kinetic inductance (KI) nanowire of a dirty superconductor, and has additional benefits such as resilience to magnetic field, higher-temperature operation, and simplified fabrication. Here, we propose, demonstrate, and analyze the performance of a KI parametric converter that relies on the weak distributed nonlinearity of a Nb-Ti-N KI nanowire. The device utilizes three-wave mixing induced by a dc current bias. We demonstrate its operation as a nondegenerate parametric amplifier with high phase-sensitive gain, reaching two-mode amplification and deamplification of approximately 30 dB for two resonances separated by 0.8 GHz, in excellent agreement with our theory of the device. We observe a dynamic range of $\ensuremath{-}108$ dBm at 30 dB gain. Our device can significantly broaden applications of quantum-limited signal processing devices including phase-preserving amplification and two-mode squeezing.
Microwave parametric amplifiers operating at the quantum noise limit have become indispensable tools for a range of cryogenic quantum technologies. These amplifiers are typically constructed from nonlinear Josephson junctions, which limit the ability to amplify high-power signals. This study reports a device based instead on the weakly nonlinear kinetic inductance intrinsic to a superconducting film of niobium titanium nitride. The amplifier offers large phase-sensitive gain and high power handling, plus a simple design and fabrication process. As it contains no junctions, it is robust to electrostatic discharge and potentially operable under high temperatures and large magnetic fields.
Quantum limited amplifiers are sought after for a wide range of applications within quantum technologies and sensing. One promising candidate is the travelling wave parametric amplifier which exploits the non-linear kinetic inductance of a superconducting transmission line. This type of microwave amplifier promises to deliver a high gain, a quantum limited noise performance over several GHz bandwidth, and a high dynamic range. However, practical realizations of this type of device have so far been limited by fabrication defects, since the length of the superconducting transmission line required for achieving substantial parametric gain is on the order of ∼1 m. Here, we report on a design for a microwave traveling wave amplifier based on a slow propagation line comprising a central strip with high kinetic inductance and quasi-fractal line-to-ground capacitors. Due to an enhanced per unit length inductance (73 nH cm−1) and capacitance (15 pF cm−1), the line has a microwave propagation velocity as low as 9.8 × 108 cm s−1. This translates into parametric gain up to 0.5 dB cm−1 and a total gain of 6 dB for just a ∼10 cm long transmission line. Moreover, the flexibility of the presented design allows balancing the line inductance and capacitance in order to keep the characteristic impedance close to 50 Ω and to suppress standing waves, both factors being essential in order to implement a practical parametric amplifier in the microwave domain.