Noisy unsharp measurements incorporated in quantum information protocols may hinder performance, reducing the quantum advantage. However, we show that, unlike projective measurements which completely destroy quantum correlations between nodes in quantum networks, sequential applications of noisy measurements can mitigate the adverse impact of noise in the measurement device on quantum information processing tasks. We demonstrate this in the case of concentrating entanglement on chosen nodes in quantum networks via noisy measurements performed by assisting qubits. In the case of networks with a cluster of three or more qubits, we exhibit that sequentially performing optimal unsharp measurements on the assisting qubits yields localizable entanglement between two nodes akin to that obtained by optimal projective measurements on the same assisting qubits. Furthermore, we find that the proposed approach using consecutive noisy measurements can potentially be used to prepare desired states that are resource for specific quantum schemes. We also argue that assisting qubits have greater control over the qubits on which entanglement is concentrated via unsharp measurements, in contrast to sharp-measurement-based protocols, which may have implications for secure quantum communication.
Noisy unsharp measurements incorporated in quantum information protocols may hinder performance, reducing the quantum advantage. However, we show that, unlike projective measurements which completely destroy quantum correlations between nodes in quantum networks, sequential applications of noisy measurements can mitigate the adverse impact of noise in the measurement device on quantum information processing tasks. We demonstrate this in the case of concentrating entanglement on chosen nodes in quantum networks via noisy measurements performed by assisting qubits. In the case of networks with a cluster of three or more qubits, we exhibit that sequentially performing optimal unsharp measurements on the assisting qubits yields localizable entanglement between two nodes akin to that obtained by optimal projective measurements on the same assisting qubits. Furthermore, we find that the proposed approach using consecutive noisy measurements can potentially be used to prepare desired states that are resource for specific quantum schemes. We also argue that assisting qubits have greater control over the qubits on which entanglement is concentrated via unsharp measurements, in contrast to sharp-measurement-based protocols, which may have implications for secure quantum communication.
Entanglement is a fundamental resource for quantum information science. However, bipartite entanglement is destroyed when one particle is observed via projective (sharp) measurements, as is typically the case in most experiments. Here, we show experimentally that, if instead of sharp measurements, one performs many sequential unsharp measurements on one particle that are suitably chosen depending on the previous outcomes, then entanglement is preserved and it is possible to reveal quantum correlations through measurements on the second particle at any step of the sequence. Specifically, we observe that pairs of photons entangled in polarization maintain their entanglement when one particle undergoes three sequential measurements and that each of these can be used to violate a Clauser-Horne-Shimony-Holt inequality. This proof-of-principle experiment demonstrates the possibility of repeatedly harnessing two crucial resources, entanglement and Bell nonlocality, that, in most quantum protocols, are destroyed after a single measurement. The protocol we use, which in principle works for an unbounded sequence of measurements, can be useful for randomness extraction.
Unsharp measurements are increasingly important for foundational insights in quantum theory and quantum information applications. Here, we report an experimental implementation of unsharp qubit measurements in a sequential communication protocol, based on a quantum random access code. The protocol involves three parties; the first party prepares a qubit system, the second party performs operations that return both a classical and quantum outcome, and the latter is measured by the third party. We demonstrate a nearly optimal sequential quantum random access code that outperforms both the best possible classical protocol and any quantum protocol that utilizes only projective measurements. Furthermore, while only assuming that the involved devices operate on qubits and that detected events constitute a fair sample, we demonstrate the noise-robust characterization of unsharp measurements based on the sequential quantum random access code. We apply this characterization towards quantifying the degree of incompatibility of two sequential pairs of quantum measurements.
We propose a measurement-based entanglement propagation strategy for networks in which all nodes except two are initially occupied by a suitably chosen single-qubit system and the two nodes share a bipartite noisy entangled state. The connections between the sites are established using unsharp two-qubit measurements. When only a single node performs measurements, we refer to it as a unidirectional protocol while when both parts of the initial entangled states perform measurements, we call it a bidirectional scheme. When the measurement outcome is post-selected, we demonstrate that in the presence of a local amplitude damping channel acting on a single site, entanglement shareability, as measured by the monogamy score, of the resulting state after measurement can be higher for all values of the strength of the noise than that of the scenario without noise. We observe that irrespective of the channel, there exists a range of unsharpness parameter where a higher monogamy score may be obtained starting from the initial nonmaximally entangled states than from the initial maximally entangled state. We report that the effect of noise on the average monogamy score entered from the resource state may be reduced faster with the unidirectional protocol than with the bidirectional one.
The prevailing consensus is that the sequential sharing of nonlocality in a Bell experiment requires generalized unsharp measurements, given that a sharp measurement inevitably destroys the entanglement of the shared state. In contrast, a recent work [A. Steffinlongo and A. Tavakoli, Projective measurements are sufficient for recycling nonlocality, Phys. Rev. Lett. 129, 230402 (2022)PRLTAO0031-900710.1103/PhysRevLett.129.230402] demonstrated the sharing of nonlocality up to two sequential observers by employing projective measurement aided with local randomness. Here, we introduce a form of local randomness-assisted qubit projective measurement protocol that enables the sharing of nonlocality by an arbitrary number of sequential observers (Bobs) with a single spatially separated observer (Alice). We achieve this by inspecting the diversity involved in implementing generalized measurements that harness nonlocality by preserving a sufficient amount of entanglement of the shared two-qubit entangled state. Furthermore, we highlight the crucial interplay between the degrees of measurement incompatibility of Alice and Bob in demonstrating the unbounded sharing of nonlocality.
Unsharp measurements are increasingly important in quantum information theory and tests of quantum theory. Here, in a semi-device-independent setting, we experimentally demonstrate their noise-robust characterisation while only assuming that the involved devices operate on qubits and that the detected events constitute a fair sample. Our experiment involves three parties; the first party prepares a qubit system, the second party performs operations which returns both a classical and quantum outcome and the later is measured by the third party. From the measured probabilities we show nearly-optimal quantum correlations for unsharp observales, falsify every model in which the operations are simulated with stochastic projective qubit measurements and obtain narrow intervals to which the sharpness parameter can be confined. Moreover, we also certify two sequential pairs of incompatible measurements and quantify their degree of incompatibility. Finally, we discuss our characterisation of the sharpness parameter as compared to that obtained from a tomographic scheme subjected to small errors.
Quantum information science is an interdisciplinary field that investigates the principles and applications of quantum mechanics in information processing. Upcoming quantum technologies promise a range of valuable applications, including powerful simulation of complex systems, enhanced computational capabilities, high-precision sensing and metrology, and secure communication via quantum key distribution. A central concept is entanglement, a unique type of correlation between quantum systems that has no classical counterpart. Entanglement plays a pivotal role in many quantum protocols, particularly as a key resource in quantum communication, where protocols such as distributed quantum computation and secret sharing are executed in a distributed setting. Hence, distributing entanglement over long distances and manipulating it locally is essential for enabling quantum communication applications. However, the effectiveness of such applications is limited by the challenges of transmitting quantum information and maintaining precise control over quantum systems. For example, quantum information carriers, such as photons traveling through optical fibers, may be lost, or the operations performed may not be perfect. Consequently, it is crucial to develop robust tools for distributing and manipulating entanglement in distributed settings in order to fully unlock the capabilities of quantum technologies. In this thesis, we explore the influence of noise on the manipulation of entanglement in entanglement-based quantum networks. First, we examine the noise resilience of various resource states, i.e., pre-established entangled states, used to achieve bipartite or tripartite communication. This is followed by an analysis of a fully asymmetric network scenario, incorporating the noise introduced by the delays from classical messaging within the quantum network. We then propose classical communication protocols to achieve bipartite communication and evaluate their noise impact under the optimization of the arrangement of the pre-established entanglement. In addition, we propose an alternative approach to quantum repeaters, a key device for entanglement distribution, based on growing multipartite states, allowing entanglement to be recycled and patched. All investigations have been carried out employing a novel formalism, also developed in this thesis, for efficiently and accurately simulating noisy quantum processes on classical hardware, with broader applicability beyond quantum communication.