In this article, we study the problem of digital pre/postcoding design in multiple-input multiple-output (MIMO) systems with 1-b resolution per complex dimension. The optimal solution that maximizes the received signal-to-noise ratio relies on an NP-hard combinatorial problem that requires exhaustive searching with exponential complexity. By using the principles of alternating optimization and quantum annealing (QA), an iterative QA-based algorithm is proposed that achieves near-optimal performance with polynomial complexity. The algorithm is associated with a rigorous mathematical framework that casts the pre/postcoding vector design to appropriate real-valued quadratic unconstrained binary optimization (QUBO) problems. Experimental results in a state-of-the-art D-WAVE QA device validate the efficiency of the proposed algorithm. To further improve the efficiency of the D-WAVE quantum device, a new preprocessing technique, which preserves the quadratic QUBO matrix from the detrimental effects of the Hamiltonian noise through nonlinear companding, is proposed. The proposed preprocessing technique significantly improves the quality of the D-WAVE solutions as well as the occurrence probability of the optimal solution.
In this article, we study the problem of digital pre/postcoding design in multiple-input multiple-output (MIMO) systems with 1-b resolution per complex dimension. The optimal solution that maximizes the received signal-to-noise ratio relies on an NP-hard combinatorial problem that requires exhaustive searching with exponential complexity. By using the principles of alternating optimization and quantum annealing (QA), an iterative QA-based algorithm is proposed that achieves near-optimal performance with polynomial complexity. The algorithm is associated with a rigorous mathematical framework that casts the pre/postcoding vector design to appropriate real-valued quadratic unconstrained binary optimization (QUBO) problems. Experimental results in a state-of-the-art D-WAVE QA device validate the efficiency of the proposed algorithm. To further improve the efficiency of the D-WAVE quantum device, a new preprocessing technique, which preserves the quadratic QUBO matrix from the detrimental effects of the Hamiltonian noise through nonlinear companding, is proposed. The proposed preprocessing technique significantly improves the quality of the D-WAVE solutions as well as the occurrence probability of the optimal solution.
In this letter, we study the analogue pre/post-coding vector design for a point-to-point multiple-input multiple-output (MIMO) system with 1-bit phase shifters. Specifically, we focus on the signal-to-noise ratio (SNR) maximization problem which corresponds to a combinatorial NP-hard due to the binary phase resolution. Two classical computation heuristics are proposed i.e., i) an 1-bit real-valued approximation of the optimal digital designs, and ii) an alternating optimization where a Rayleigh quotient problem is solved at each iteration. An iterative quantum annealing (QA)-based heuristic is also investigated, which outperforms classical counterparts and achieves near-optimal performance while ensuring polynomial time complexity. Experimental results in a real-world D-WAVE QA device validate the efficiency of the proposed QA approach.
The quantum annealing devices, which encode the solution to a computational problem in the ground state of a quantum Hamiltonian, are implemented in D-Wave systems with more than 2,000 qubits. However, quantum annealing can solve only a classical combinatorial optimization problem such as an Ising model, or equivalently, a quadratic unconstrained binary optimization (QUBO) problem. In this paper, we formulate the QUBO model to solve elliptic problems with Dirichlet and Neumann boundary conditions using the finite element method. In this formulation, we develop the objective function of quadratic binary variables represented by qubits and the system finds the binary string combination minimizing the objective function globally. Based on the QUBO formulation, we introduce an iterative algorithm to solve the elliptic problems. We discuss the validation of the modeling on the D-Wave quantum annealing system.
Abstract Quantum computers have strict requirements for the problems that they can efficiently solve. One of the principal limiting factor for the performances of noisy intermediate-scale quantum (NISQ) devices is the number of qubits required by the running algorithm. Several combinatorial optimization problems can be solved with NISQ devices once that a corresponding quadratic unconstrained binary optimization (QUBO) form is derived. Numerous techniques have been proposed to achieve such reformulations and, depending on the method chosen, the number of binary variables required, and therefore of qubits, can vary considerably. The aim of this work is to drastically reduce the variables needed for these QUBO reformulations in order to unlock the possibility to efficiently obtain optimal solutions for a class of optimization problems with NISQ devices. This goal is achieved by introducing novel tools that allow an efficient use of slack variables, even for problems with non-linear constraints, without the need to approximate the starting problem. We divide our new techniques in two independent parts, called the iterative quadratic polynomial and the master-satellite methods. Hence, we show how to apply our techniques in case of an NP-hard optimization problem inspired by a real-world financial scenario called Max-Profit Balance Settlement . We follow by submitting several instances of this problem to two D-wave quantum annealers, comparing the performances of our novel approach with the standard methods used in these scenarios. Moreover, this study allows to appreciate several performance differences between the D-wave Advantage and next-generation Advantage2 quantum annealers. We show that the adoption of our techniques in this context allows to obtain QUBO formulations with significantly fewer slack variables, i.e. around 90% less, and D-wave annealers provide considerably higher correct solution rates, which moreover do not decrease with the input size as fast as when adopting standard techniques.
Quantum annealing offers an appealing route to handle large-scale optimization problems. Existing Quantum Annealing processing units are readily available via cloud platform access for solving Quadratic Unconstrained Binary Optimization (QUBO) problems. In particular, the novel D-Wave Advantage device has been recently released. Its performance is expected to improve upon the previous state-of-the-art D-Wave 2000Q annealer, due to higher number of qubits and the Pegasus topology. Here, we present a comparative study via an ensemble of Maximum Likelihood (ML) Channel Decoder problems for MIMO scenarios in Centralized Radio Access Network (C-RAN) architectures. The main challenge for exact optimization of ML decoders with ever-increasing demand for higher data rates is the exponential increase of the solution space with problem sizes. Since current 5G solutions mainly use approximate methodologies, Kim et al. leveraged Quantum Annealing for large MIMO problems with Phase Shift Keying and Quadrature Amplitude Modulation scenarios. Here, we extend their work and analyze experiments for more complex modulations and larger MIMO antenna array sizes. By implementing the extended QUBO formulae on the novel annealer architecture, we uncover the limits of state-of-the-art quantum optimization for the massive MIMO ML decoder. We report on the improvements and discuss the uncovered limiting factors learned from the 64-QAM extension. We include the enhanced evaluation of raw annealer sampling via implementation of post-processing methods in the comparative analysis between D-Wave 2000Q and D-Wave Advantage system.
In a multi-user system with multiple antennas at the base station, precoding techniques in the downlink broadcast channel allow users to detect their respective data in a non-cooperative manner. Vector Perturbation Precoding (VPP) is a non-linear variant of transmit-side channel inversion that perturbs user data to achieve full diversity order. While promising, finding an optimal perturbation in VPP is known to be an NP-hard problem, demanding heavy computational support at the base station and limiting the feasibility of the approach to small MIMO systems. This work proposes a radically different processing architecture for the downlink VPP problem, one based on Quantum Annealing (QA), to enable the applicability of VPP to large MIMO systems. Our design reduces VPP to a quadratic polynomial form amenable to QA, then refines the problem coefficients to mitigate the adverse effects of QA hardware noise. We evaluate our proposed QA based VPP (QAVP) technique on a real Quantum Annealing device over a variety of design and machine parameter settings. With existing hardware, QAVP can achieve a BER of 10−4with 100µs compute time, for a 6 × 6 MIMO system using 64 QAM modulation at 32 dB SNR.
Several optimization solvers inspired by quantum annealing have been recently developed, either running on actual quantum hardware or simulating it on traditional digital computers. Industry and academics look at their potential in solving hard combinatorial optimization problems. Formally, they provide heuristic solutions for Ising models, which are equivalent to quadratic unconstrained binary optimization (QUBO). Constraints on solutions feasibility need to be properly encoded. We experiment on different ways of performing such an encoding. As benchmark we consider the cardinality constrained quadratic knapsack problem (CQKP), a minimal extension of QUBO with one inequality and one equality constraint. We consider different strategies of constraints penalization and variables encoding. We compare three QUBO solvers: quantum annealing on quantum hardware (D-Wave Advantage), probabilistic algorithms on digital hardware and mathematical programming solvers. We analyze their QUBO resolution quality and time, and the persistence values extracted in the quantum annealing sampling process. Our results show that a linear penalization of CQKP inequality improves current best practice. Furthermore, using such a linear penalization, persistence values produced by quantum hardware in a generic way allow to match a specific CQKP metric from literature. They are therefore suitable for general purpose variable fixing in core algorithms for combinatorial optimization.