Fatemeh Mostafavi, Mingyuan Hong, Riley B. Dawkins, Jannatul Ferdous, Ian Baum, Rui‐Bo Jin, Roberto de J. León‐Montiel, Chenglong You, Omar S. Magaña‐Loaiza
It is thought that schemes for quantum imaging are fragile against realistic environments in which the background noise is often stronger than the nonclassical signal of the imaging photons. Unfortunately, it is unfeasible to produce brighter quantum light sources to alleviate this problem. Here, we overcome this paradigmatic limitation by developing a quantum imaging scheme that relies on the use of natural sources of light. This is achieved by performing conditional detection on the photon number of the thermal light field scattered by a remote object. Specifically, the conditional measurements in our scheme enable us to extract quantum features of the detected thermal photons to produce quantum images with improved signal-to-noise ratios. This technique shows an exponential enhancement in the contrast of quantum images. This measurement scheme enables the possibility of producing images from the vacuum fluctuations of the light field. This is experimentally demonstrated through the implementation of a single-pixel camera with photon-number-resolving capabilities. As such, we believe that our scheme opens a new paradigm in the field of quantum imaging. It also unveils the potential of combining natural light sources with nonclassical detection schemes for the development of robust quantum technologies.
It is thought that schemes for quantum imaging are fragile against realistic environments in which the background noise is often stronger than the nonclassical signal of the imaging photons. Unfortunately, it is unfeasible to produce brighter quantum light sources to alleviate this problem. Here, we overcome this paradigmatic limitation by developing a quantum imaging scheme that relies on the use of natural sources of light. This is achieved by performing conditional detection on the photon number of the thermal light field scattered by a remote object. Specifically, the conditional measurements in our scheme enable us to extract quantum features of the detected thermal photons to produce quantum images with improved signal-to-noise ratios. This technique shows an exponential enhancement in the contrast of quantum images. This measurement scheme enables the possibility of producing images from the vacuum fluctuations of the light field. This is experimentally demonstrated through the implementation of a single-pixel camera with photon-number-resolving capabilities. As such, we believe that our scheme opens a new paradigm in the field of quantum imaging. It also unveils the potential of combining natural light sources with nonclassical detection schemes for the development of robust quantum technologies.
Classical light sources emit a randomly-timed stream of individual photons, the spatial distribution of which can be detected with a camera to form an image. Quantum light sources, based on parametric down conversion, emit photons as correlated photon-pairs. The spatial correlations between the photons enables imaging systems where the preferential selection of photon-pairs allows for enhancements in the noise performance over what is possible using classical light sources. However, until now the technical challenge of measuring, and correlating both photons has led to system complexity. Here we show that a camera capable of resolving the number of individual photons in each pixel of the detector array can be used to record an image formed from these photon-pair events and hence achieve a greater contrast than possible using a classical light source. We achieve an enhancement in the ratio of two-photon events compared to one-photon events using spatially correlated SPDC light compared to uncorrelated illumination by a LED. These results indicate the potential advantages of using photon counting cameras in quantum imaging schemes and these advantages will further increase as the technology is developed. Operating in photon sparse regimes such systems have potential applications in low-light microscopy and covert imaging.
The quantum statistical fluctuations of electromagnetic fields establish a limit, known as the shot-noise limit, on the sensitivity of optical measurements performed with classical technologies. However, quantum technologies are not constrained by this shot-noise limit. In this regard, the possibility of using every photon produced by quantum sources of light to estimate small physical parameters, beyond the shot-noise limit, constitutes one of the main goals of quantum optics. Here, we experimentally demonstrate a scalable protocol for quantum-enhanced optical phase estimation across a broad range of phases, with neither pre- nor post-selected measurements. This is achieved through the efficient design of a source of spontaneous parametric downconversion in combination with photon-number-resolving detection. The robustness of two-mode squeezed vacuum states against loss allows us to outperform schemes based on N00N states, in which the loss of a single photon is enough to remove all phase information from a quantum state. In contrast to other schemes that rely on N00N states or conditional measurements, the sensitivity of our technique could be improved through the generation and detection of high-order photon pairs. This unique feature of our protocol makes it scalable. Our work is important for quantum technologies that rely on multiphoton interference such as quantum imaging, boson sampling, and quantum networks.
Abstract In this review we present the potentialities and the achievements of the use of non-classical photon-number correlations in twin-beam states for many applications, ranging from imaging to metrology. Photon-number correlations in the quantum regime are easily produced and are rather robust against unavoidable experimental losses, and noise in some cases, if compared to the entanglement, where losing one photon can completely compromise the state and its exploitable advantages. Here, we will focus on quantum enhanced protocols in which only phase-insensitive intensity measurements (photon-number counting) are performed, which allow probing the transmission/absorption properties of a system, leading, for example, to innovative target detection schemes in a strong background. In this framework, one of the advantages is that the sources experimentally available emit a wide number of pair-wise correlated modes, which can be intercepted and exploited separately, for example by many pixels of a camera, providing a parallelism, essential in several applications, such as wide-field sub-shot-noise imaging and quantum enhanced ghost imaging. Finally, non-classical correlation enables new possibilities in quantum radiometry, e.g. the possibility of absolute calibration of a spatial resolving detector from the on-off single-photon regime to the linear regime in the same setup.
We use entangled photons as the light source in a normal microscope. Using this quantum illumination improves both the resolution and noise rejection in the image. The resolution of any classical imaging system is limited by the diffraction created by the finite size of the imaging lens. By using a light source that emits pairs of entangled photons and carefully controlling a camera that is capable of detecting single photons it is possible to observe these photons arriving two-by-two. Applying camera analysis software to log only these two-by-two events one can form an image from the mid-point (bisector) of each of these pair events. The image formed from the sum of all these bisectors has an improved resolution that surpasses the classical limit. Another advantage of using a quantum illumination is that it allows the two-by-two events from entangled photon pairs to be distinguished from background (classical) light and sensor noise. When processed in this way the resulting image is free of camera noise and any background light may be eliminated. The use of a quantum illumination protocol such as that used here results in the elimination of background light and therefore allows the development of the optical equivalent of quantum radar – a quantum enhanced LIDAR scheme. Using quantum illumination, combined with commercially available cameras that are sensitive to single photons creates a new approach to super-resolution and low noise microscopy. Imaging through noise with quantum illumination, T Gregory, P-A Moreau, E Toninelli, and M J Padgett, Science Advances 6, eaay2652 (2020) Resolution-enhanced quantum imaging by centroid estimation of biphotons, E Toninelli, P-A Moreau, T Gregory, A Mihalyi, M Edgar, N Radwell, and M J Padgett, Optica 6, 347-353 (2019)
Quantum imaging usually refers to imaging that takes advantage of quantum entanglement to obtain results beyond the classically achievable limits [1]. Various complex experimental setups are used to obtain quantum images, and even more complex experimental setups are used when the goal is to record and retrieve the phase information of the object. Classical holography offers the possibility to record and retrieve phase information from a hologram [2]. However, in low-light conditions, a major challenge is to record images with a high signal-to-noise ratio. Classical schemes [3]–[5], of course, do not aim to demonstrate the quantum properties of the experiments, and quantum schemes [6]–[8] rely on complex preparation of the light beam and do not necessarily provide an advantage for holographic imaging. To date, no simple quantum scheme with quantum advantage has been developed for low-light holographic imaging.
The technologies utilizing quantum states of light have been in the spotlight for the last two decades. In this regard, quantum metrology, quantum imaging, quantum-optical communication are some of the important applications that exploit fascinating quantum properties like quantum superposition, quantum correlations, and nonclassical photon statistics. However, the state-of-art technologies operating at the single-photon level are not robust enough to truly realize a reliable quantum-photonic technology. In Chapter 1, I present a historical account of photon-based technologies. Furthermore, I discuss recent efforts and encouraging developments in the field of quantum-photonic technologies, and major challenges for the experimental realization of reliable quantum technologies utilizing photons, setting up a stage for unveiling our smart methodologies to cope with them. Similarly, in Chapter 2, I review the fundamental concepts such as states of light, spatial modes of light, and machine learning. In Chapter 3 of this dissertation, I present a theoretical work on a nonlinear quantum metrology scheme, showing a sub-shot-noise limited phase estimation using the displaced-squeezed light and on/off detection. Furthermore, I discuss a camera-based squeezed-light detection technique that can be a smart and time-efficient alternative to conventional balanced-homodyne detection. In Chapter 4, I discuss our efforts to incorporate artificial intelligence in a quest to improve the efficiency of discriminating thermal light sources from coherent light sources. The conventional identification technique requires a large number of measurements. We utilize artificial neural networks to dramatically reduce the number of measurements required to distinguish thermal light and coherent light. In Chapter 5, I present a communication protocol that utilizes the spatial modes of light. Despite being valuable resources for a wide variety of quantum technologies, spatial modes of light are extremely vulnerable to random phase fluctuations. The conventional techniques to cope with these challenges are relatively inefficient. We utilize convolutional neural networks to perform the spatial mode correction of single photons, resulting in a near-unity fidelity of correction. I wrap up my dissertation in Chapter 6 by summarizing the historical context of quantum technologies, challenging problems facing state-of-art quantum technologies, and the importance of our efforts to introduce artificial intelligence in photonic technologies.