Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2405.11447

Disturbance Evaluation Circuit in Quantum Measurement

Haruki Emori, Masanao Ozawa, Akihisa Tomita

Published May 19, 2024• 2 citations
arXivHTMLPDF

Abstract

According to the uncertainty principle, every quantum measurement accompanies disturbance. In particular, accurate sequential measurements need the accurate control of disturbance. However, the correct role of disturbance in the uncertainty principle has been known only recently. Understanding the disturbance is crucial for understanding the fundamentals of physics, and accurately evaluating the disturbance is important for quantum technologies such as quantum information processing and quantum metrology. Therefore, the experimental evaluation of the disturbance is a significant challenge in those fields. In this study, we propose a novel evaluation method for the quantum root-mean-square (QRMS) disturbance and compare its performance with the existing approaches, known as the three-state method (TSM) and the weak measurement method (WMM). Our method establishes a correspondence between the QRMS disturbance of the measurement and the second-order derivative of the decoherence induced in a newly introduced weak probe system with respect to the coupling strength of the weak interaction at its zero-limit. Furthermore, we demonstrate the effectiveness of our method in comparison with the other two through a simulation and experiment using a quantum computer. The results capture the key features of the TSM, WMM, and our method, providing insights into the strengths and limitations of these methods.

DOI
10.48550/arxiv.2405.11447

Related papers

Comparison of quantum state protection against decoherence via weak measurement, a survey

Sajede Harraz, Shuang Cong, Juan Jose Nieto

One of the crucial tasks in quantum systems is to reduce the effects of decoherence due to the unavoidable interactions between a system and its environment. Many protection schemes have been proposed recently, among them the weak measurement quantum measurement reversal (WMQMR), weak measurement-based quantum feedback control (QFBC) and quantum feedforward control (QFFC) are reviewed in this paper. By considering weak measurement, the aim is to find a balance between information gain and disturbance of the system caused by the measurement. We classify different types of measurement and give the definition of noise sources and their effects on the state of the system. Finally, we compare and analyze the performance of the discussed protection schemes for different noise sources by numerical simulations.

arXiv:2109.12842•International Journal of Quantum Information•Apr 6, 2022•13 citations

Experimental Feedback Control of Quantum Systems Using Weak Measurements

Geoff Gillett, R. B. Dalton, B. P. Lanyon +7 more

A goal of the emerging field of quantum control is to develop methods for quantum technologies to function robustly in the presence of noise. Central issues are the fundamental limitations on the available information about quantum systems and the disturbance they suffer in the process of measurement. In the context of a simple quantum control scenario-the stabilization of nonorthogonal states of a qubit against dephasing-we experimentally explore the use of weak measurements in feedback control. We find that, despite the intrinsic difficultly of implementing them, weak measurements allow us to control the qubit better in practice than is even theoretically possible without them. Our work shows that these more general quantum measurements can play an important role for feedback control of quantum systems.

arXiv:0911.3698•Physical Review Letters•Feb 26, 2010•154 citations

Linear position measurements with minimum error-disturbance in each minimum uncertainty state

Kazuya Okamura

In quantum theory, measuring process is an important physical process; it is a quantum description of the interaction between the system of interest and the measuring device. Error and disturbance are used to quantitatively check the performance of the measurement, and are defined by using measuring process. Uncertainty relations are a general term for relations that provide constraints on them, and actively studied. However, the true error-disturbance bound for position measurements is not known yet. Here we concretely construct linear position measurements with minimum error-disturbance in each minimum uncertainty state. We focus on an error-disturbance relation (EDR), called the Branciard-Ozawa EDR, for position measurements. It is based on a quantum root-mean-square (q-rms) error and a q-rms disturbance. We show the theorem that gives a necessary and sufficient condition for a linear position measurement to achieve its lower bound in a minimum uncertainty state, and explicitly give exactly solvable linear position measurements achieving its lower bound in the state. We then give probability distributions and states after the measurement when using them. It is expected to construct measurements with minimum error-disturbance in a broader class of states in the future, which will lead to a new understanding of quantum limits, including uncertainty relations.

arXiv:2012.12707•Dec 23, 2020•1 citation

Study of Generalized Quantum Measurement of Qubit Systems in a Small-Scale Quantum Computer

TINGRUI DONG

In recent decades, quantum information science and technology have shown great potential for advancing secure communication and exploring quantum nonlocality.Distinguished from traditional information technology by properties such as non-cloning and entanglement, they offer transformative possibilities in communication, cryptography, and computing.However, a significant challenge in this field is the generalized measurement problem: extracting information from quantum bits while preserving their delicate quantum properties.Addressing this challenge is crucial not only for deepening our understanding of quantum mechanics but also for enabling practical applications, such as quantum error correction, teleportation, and secure communication.The emergence of programmable noisy intermediatescale quantum (NISQ) computers provides a promising platform for tackling these challenges, offering high flexibility in investigating measurement problems in qubit systems.The first part of this research focuses on testing the error-disturbance uncertainty relation (EDR), a fundamental concept in quantum theory describing the trade-off between measurement accuracy and system disturbance.Motivated by the need to assess the performance of NISQ devices for generalized quantum measurements, I conducted experiments on a 7-qubit superconducting NISQ processor.Using sequential generalized measurements and root-mean-square difference definitions, I systematically explored the EDRs.The findings confirm the violation of the Heisenberg EDR while validating the robustness of the Ozawa and Branciard EDRs, even in the presence of noise inherent to NISQ computers.These results establish NISQ devices as reliable platforms for studying generalized quantum measurement theories, providing foundational insights for advancing more complex quantum tasks.Building on the results from single-qubit measurements, the second part of this research investigates the measurement of entangled qubits, particularly in spatially separated systems a major challenge in quantum information science.Motivated by the limitations of traditional destructive Bell state measurements (BSMs) for quantum communication protocols, I experimentally validated a generalized non-destructive Bell state measurement (NSBM) protocol on a 127-qubit superconducting NISQ computer.By designing quantum circuits to implement the strongest measurement strength, I compared the NSBM protocol with traditional destructive BSMs.The results demonstrate that non-destructive BSMs preserve quantum entanglement with high fidelity, functioning effectively as entanglement filters and providing flexibility for quantum communication protocols.This work introduces a novel approach to quantum communication tasks reliant on spatially separated entangled qubits, such as quantum teleportation and secure communication.This research explored generalized quantum measurement protocols in single-and two-qubit systems using programmable NISQ computers.The investigation of errordisturbance uncertainty relations (EDRs) in single-qubit measurements evaluated the performance of NISQ devices, confirming their capability as platforms for studying generalized quantum measurements.The experimental validation of non-destructive Bell state measurements introduced an innovative approach to quantum communication protocols, such as quantum teleportation and secure communication, which depend on the precise measurement of spatially separated entangled qubits.These findings deepen our understanding of generalized quantum measurements and pave the way for advancing quantum technologies through the exploration of larger systems, improved measurement techniques, and integration into scalable quantum networks.

•Mar 25, 2025•0 citations

Colloquium: Quantum root-mean-square error and measurement uncertainty relations

Paul Busch, PEKKA J. LAHTI, Reinhard F. Werner

Recent years have witnessed a controversy over Heisenberg's famous error-disturbance relation. Here the conflict is resolved by way of an analysis of the possible conceptualizations of measurement error and disturbance in quantum mechanics. Two approaches to adapting the classic notion of root-mean-square error to quantum measurements are discussed. One is based on the concept of a noise operator; its natural operational content is that of a mean deviation of the values of two observables measured jointly, and thus its applicability is limited to cases where such joint measurements are available. The second error measure quantifies the differences between two probability distributions obtained in separate runs of measurements and is of unrestricted applicability. We show that there are no nontrivial unconditional joint-measurement bounds for state-dependent errors in the conceptual framework discussed here, while Heisenberg-type measurement uncertainty relations for state-independent errors have been proven.

arXiv:1312.4393•Reviews of Modern Physics•Dec 18, 2014•224 citations

Determining complementary properties using weak-measurement: uncertainty, predictability, and disturbance

Guillaume Thekkadath, Felix Hufnagel, Jeff S. Lundeen

It is often said that measuring a system's position must disturb the complementary property, momentum, by some minimum amount due to the Heisenberg uncertainty principle. Using a 'weak-measurement', this disturbance can be reduced. One might expect this comes at the cost of also reducing the measurement's precision. However, it was recently demonstrated that a sequence consisting of a weak position measurement followed by a regular momentum measurement can probe a quantum system at a single point, with zero width, in position-momentum space. Here, we study this 'joint weak-measurement' and reconcile its compatibility with the uncertainty principle. While a single trial probes the system with a resolution that can saturate Heisenberg's limit, we show that averaging over many trials can be used to surpass this limit. The weak-measurement does not trade away precision, but rather another type of uncertainty called 'predictability' which quantifies the certainty of retrodicting the measurement's outcome.

arXiv:1809.05984•New Journal of Physics•Oct 31, 2018•12 citations
According to the uncertainty principle, every quantum measurement accompanies disturbance. In particular, accurate sequential measurements need the accurate control of disturbance. However, the correct role of disturbance in the uncertainty principle has been known only recently. Understanding the disturbance is crucial for understanding the fundamentals of physics, and accurately evaluating the disturbance is important for quantum technologies such as quantum information processing and quantum metrology. Therefore, the experimental evaluation of the disturbance is a significant challenge in those fields. In this study, we propose a novel evaluation method for the quantum root-mean-square (QRMS) disturbance and compare its performance with the existing approaches, known as the three-state method (TSM) and the weak measurement method (WMM). Our method establishes a correspondence between the QRMS disturbance of the measurement and the second-order derivative of the decoherence induced in a newly introduced weak probe system with respect to the coupling strength of the weak interaction at its zero-limit. Furthermore, we demonstrate the effectiveness of our method in comparison with the other two through a simulation and experiment using a quantum computer. The results capture the key features of the TSM, WMM, and our method, providing insights into the strengths and limitations of these methods.
One of the crucial tasks in quantum systems is to reduce the effects of decoherence due to the unavoidable interactions between a system and its environment. Many protection schemes have been proposed recently, among them the weak measurement quantum measurement reversal (WMQMR), weak measurement-based quantum feedback control (QFBC) and quantum feedforward control (QFFC) are reviewed in this paper. By considering weak measurement, the aim is to find a balance between information gain and disturbance of the system caused by the measurement. We classify different types of measurement and give the definition of noise sources and their effects on the state of the system. Finally, we compare and analyze the performance of the discussed protection schemes for different noise sources by numerical simulations.
A goal of the emerging field of quantum control is to develop methods for quantum technologies to function robustly in the presence of noise. Central issues are the fundamental limitations on the available information about quantum systems and the disturbance they suffer in the process of measurement. In the context of a simple quantum control scenario-the stabilization of nonorthogonal states of a qubit against dephasing-we experimentally explore the use of weak measurements in feedback control. We find that, despite the intrinsic difficultly of implementing them, weak measurements allow us to control the qubit better in practice than is even theoretically possible without them. Our work shows that these more general quantum measurements can play an important role for feedback control of quantum systems.
In quantum theory, measuring process is an important physical process; it is a quantum description of the interaction between the system of interest and the measuring device. Error and disturbance are used to quantitatively check the performance of the measurement, and are defined by using measuring process. Uncertainty relations are a general term for relations that provide constraints on them, and actively studied. However, the true error-disturbance bound for position measurements is not known yet. Here we concretely construct linear position measurements with minimum error-disturbance in each minimum uncertainty state. We focus on an error-disturbance relation (EDR), called the Branciard-Ozawa EDR, for position measurements. It is based on a quantum root-mean-square (q-rms) error and a q-rms disturbance. We show the theorem that gives a necessary and sufficient condition for a linear position measurement to achieve its lower bound in a minimum uncertainty state, and explicitly give exactly solvable linear position measurements achieving its lower bound in the state. We then give probability distributions and states after the measurement when using them. It is expected to construct measurements with minimum error-disturbance in a broader class of states in the future, which will lead to a new understanding of quantum limits, including uncertainty relations.
In recent decades, quantum information science and technology have shown great potential for advancing secure communication and exploring quantum nonlocality.Distinguished from traditional information technology by properties such as non-cloning and entanglement, they offer transformative possibilities in communication, cryptography, and computing.However, a significant challenge in this field is the generalized measurement problem: extracting information from quantum bits while preserving their delicate quantum properties.Addressing this challenge is crucial not only for deepening our understanding of quantum mechanics but also for enabling practical applications, such as quantum error correction, teleportation, and secure communication.The emergence of programmable noisy intermediatescale quantum (NISQ) computers provides a promising platform for tackling these challenges, offering high flexibility in investigating measurement problems in qubit systems.The first part of this research focuses on testing the error-disturbance uncertainty relation (EDR), a fundamental concept in quantum theory describing the trade-off between measurement accuracy and system disturbance.Motivated by the need to assess the performance of NISQ devices for generalized quantum measurements, I conducted experiments on a 7-qubit superconducting NISQ processor.Using sequential generalized measurements and root-mean-square difference definitions, I systematically explored the EDRs.The findings confirm the violation of the Heisenberg EDR while validating the robustness of the Ozawa and Branciard EDRs, even in the presence of noise inherent to NISQ computers.These results establish NISQ devices as reliable platforms for studying generalized quantum measurement theories, providing foundational insights for advancing more complex quantum tasks.Building on the results from single-qubit measurements, the second part of this research investigates the measurement of entangled qubits, particularly in spatially separated systems a major challenge in quantum information science.Motivated by the limitations of traditional destructive Bell state measurements (BSMs) for quantum communication protocols, I experimentally validated a generalized non-destructive Bell state measurement (NSBM) protocol on a 127-qubit superconducting NISQ computer.By designing quantum circuits to implement the strongest measurement strength, I compared the NSBM protocol with traditional destructive BSMs.The results demonstrate that non-destructive BSMs preserve quantum entanglement with high fidelity, functioning effectively as entanglement filters and providing flexibility for quantum communication protocols.This work introduces a novel approach to quantum communication tasks reliant on spatially separated entangled qubits, such as quantum teleportation and secure communication.This research explored generalized quantum measurement protocols in single-and two-qubit systems using programmable NISQ computers.The investigation of errordisturbance uncertainty relations (EDRs) in single-qubit measurements evaluated the performance of NISQ devices, confirming their capability as platforms for studying generalized quantum measurements.The experimental validation of non-destructive Bell state measurements introduced an innovative approach to quantum communication protocols, such as quantum teleportation and secure communication, which depend on the precise measurement of spatially separated entangled qubits.These findings deepen our understanding of generalized quantum measurements and pave the way for advancing quantum technologies through the exploration of larger systems, improved measurement techniques, and integration into scalable quantum networks.
Recent years have witnessed a controversy over Heisenberg's famous error-disturbance relation. Here the conflict is resolved by way of an analysis of the possible conceptualizations of measurement error and disturbance in quantum mechanics. Two approaches to adapting the classic notion of root-mean-square error to quantum measurements are discussed. One is based on the concept of a noise operator; its natural operational content is that of a mean deviation of the values of two observables measured jointly, and thus its applicability is limited to cases where such joint measurements are available. The second error measure quantifies the differences between two probability distributions obtained in separate runs of measurements and is of unrestricted applicability. We show that there are no nontrivial unconditional joint-measurement bounds for state-dependent errors in the conceptual framework discussed here, while Heisenberg-type measurement uncertainty relations for state-independent errors have been proven.
It is often said that measuring a system's position must disturb the complementary property, momentum, by some minimum amount due to the Heisenberg uncertainty principle. Using a 'weak-measurement', this disturbance can be reduced. One might expect this comes at the cost of also reducing the measurement's precision. However, it was recently demonstrated that a sequence consisting of a weak position measurement followed by a regular momentum measurement can probe a quantum system at a single point, with zero width, in position-momentum space. Here, we study this 'joint weak-measurement' and reconcile its compatibility with the uncertainty principle. While a single trial probes the system with a resolution that can saturate Heisenberg's limit, we show that averaging over many trials can be used to surpass this limit. The weak-measurement does not trade away precision, but rather another type of uncertainty called 'predictability' which quantifies the certainty of retrodicting the measurement's outcome.