Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2405.10886 · Physical Review Applied

Three-mode tunable coupler for superconducting two-qubit gates

Elena Yu. Egorova, Alena S. Kazmina, Ilya A. Simakov, Ilya N. Moskalenko, Nikolay N. Abramov, Daria A. Kalacheva, Viktor B. Lubsanov, Aleksey N. Bolgar, Nataliya Maleeva, Ilya S. Besedin

Published Jun 5, 2025• 9 citations
arXivHTMLPDF

Abstract

Building a scalable universal high-performance quantum processor is a formidable challenge. In particular, the problem of realizing fast high-perfomance two-qubit gates of high-fidelity remains needful. Here we propose a building block for a scalable quantum processor consisting of two transmons and a tunable three-mode coupler allowing for a ZZ interaction control. We experimentally demonstrate the native CZ gate with the pulse duration of 60 ns achieving the two-qubit gate fidelity above 98%, limited mostly by qubit coherence time. Numerical simulations show that by optimizing the gate duration the fidelity can be pushed over 99.97%.

DOI
10.1103/2h4m-mg2p

Related papers

High-fidelity two-qubit gates with transmon qubits using bipolar flux pulses and tunable couplers

Nikita S. Smirnov, Aleksei R. Matanin, Аnton I. Ivanov +15 more

High-fidelity two-qubit gates are essential for scalable quantum computing. We present a scheme based on superconducting transmon qubits and a control pulse delivery protocol that enables arbitrary controlled-phase gates modulated solely by an independent arbitrary waveform generator pulse. We combined a tunable coupler design with bipolar flux-pulsing to demonstrate a high-fidelity gate with a peak performance of $99.5\%$. Our gates inherit the advantages of both approaches: minimal residual ZZ coupling, built-in echo-like low-frequency noise protection, and time-scale control pulse reproducibility, while remaining easy to calibrate. We optimize the system energy levels to mitigate leakage to the coupler and suppress residual interactions. Numerical simulations of the scheme as three qutrits indicate that an error below $1 \times 10^{-3}$ is achievable. We confirm the scalability potential of the proposed scheme on high-fidelity 4-qubit and 8-qubit quantum processors

arXiv:2509.04965•Physical Review Applied•Jul 13, 2026•1 citation

Realization of Fast All-Microwave Controlled-Z Gates with a Tunable Coupler

Shaowei Li, Daojin Fan, Ming Gong +29 more

The development of high-fidelity two-qubit quantum gates is essential for digital quantum computing. Here, we propose and realize an all-microwave parametric controlled-Z (CZ) gates by coupling strength modulation in a superconducting Transmon qubit system with tunable couplers. After optimizing the design of the tunable coupler together with the control pulse numerically, we experimentally realized a 100 ns CZ gate with high fidelity of 99.38% ± 0.34% and the control error being 0.1%. We note that our CZ gates are not affected by pulse distortion and do not need pulse correction, providing a solution for the real-time pulse generation in a dynamic quantum feedback circuit. With the expectation of utilizing our all-microwave control scheme to reduce the number of control lines through frequency multiplexing in the future, our scheme draws a blueprint for the high-integrable quantum hardware design.

arXiv:2202.06616•Chinese Physics Letters•Feb 1, 2022•19 citations

Long-Distance Transmon Coupler with cz-Gate Fidelity above 99.8 %

Fabian Marxer, Antti P. Vepsäläinen, Shan W. Jolin +36 more

Tunable coupling of superconducting qubits has been widely studied due to its importance for isolated gate operations in scalable quantum processor architectures.Here, we demonstrate a tunable qubit-qubit coupler based on a floating transmon device, which allows us to place qubits at least 2 mm apart from each other while maintaining over 50-MHz coupling between the coupler and the qubits.In the introduced tunable-coupler design, both the qubit-qubit and the qubit-coupler couplings are mediated by two waveguides instead of relying on direct capacitive couplings between the components, reducing the impact of the qubit-qubit distance on the couplings.This leaves space for each qubit to have an individual readout resonator and a Purcell filter, which is needed for fast high-fidelity readout.In addition, simulations show that the large qubit-qubit distance significantly lowers unwanted non-nearest-neighbor coupling and allows multiple control lines to cross over the structure with minimal crosstalk.Using the proposed flexible and scalable architecture, we demonstrate a controlled-Z gate with (99.81 ± 0.02)% fidelity.

arXiv:2208.09460•PRX Quantum•Feb 6, 2023•84 citations

Superconducting architecture demonstrating fast, tunable high-fidelity CZ gates with parametric control of ZZ coupling

X.Y. Jin, Z. Parrott, K. Cicak +6 more

Future quantum information processors require tunable coupling architectures that can produce high-fidelity logical gates between two or more qubits. Parametric coupling is a powerful technique for generating tunable interactions between many qubits. Here, we present a highly flexible parametric coupling scheme with superconducting qubits that provides complete removal of residual Z Z coupling and the implementation of driven SWAP or SWAP-free controlled- Z ( C Z ) gates. Our fully integrated two-dimensional on-chip coupler design is only weakly flux tunable, cancels static linear coupling between the qubits, avoids internal coupler dynamics or excitations, and is extensible to multiqubit circuit-QED systems. Exploring gate fidelity versus gate duration allows us to maximize two-qubit gate fidelity, while providing insights into possible error sources for these gates. Randomized benchmarking over several hours reveals that the parametric SWAP C Z gate achieves an average fidelity of 99.44 ± 0.09 % in a gate duration of 70 ns and that a dispersively driven parametric SWAP-free C Z gate attains an average fidelity of 99.47 ± 0.07 % in only 30 ns. The fidelity remained above this value for over 8 h and peaked twice with a maximum of 99.67 ± 0.14 % . Overall, our parametric approach combines versatility, precision, speed, and high performance in one compact coupler design.

arXiv:2305.02907•Physical Review Applied•Oct 21, 2025•15 citations

Scalable Fluxonium Quantum Processors via Tunable-Coupler Architecture

Ze Zhan, Zishuo Li, Fei Wang +24 more

Superconducting quantum processors have largely converged on transmon-based architectures, while alternative qubit modalities with intrinsic error protection have lacked a demonstrated path to scalable system integration. In particular, although tunable-coupler-mediated interactions have been validated for small fluxonium systems, it remains unclear whether such designs can be scaled to a multi-qubit lattice. Here, we establish a scalable fluxonium processor architecture based on a modular qubit-coupler unit cell engineered to suppress residual interactions and spectator errors in a many-qubit lattice. The system enables parallel single-qubit gate fidelities approaching 99.99% and two-qubit CZ gate fidelities around 99%. With an optimized gate duration of 32 ns, the best CZ gate fidelity reaches 99.9%. We further validate this architecture in a 22-qubit processor based on the same configuration, where parallel operations enable the deterministic generation of Greenberger-Horne-Zeilinger states involving up to 10 qubits. Together, these results demonstrate that the fluxonium-tunable-coupler unit cell composes without emergent interaction pathologies and establish fluxonium as a scalable superconducting qubit platform.

quant-pharXiv:2604.13363•Apr 16, 2026•7 citations

High fidelity two-qubit gates on fluxoniums using a tunable coupler

Ilya N. Moskalenko, Ilya A. Simakov, Nikolay N. Abramov +7 more

Abstract Superconducting fluxonium qubits provide a promising alternative to transmons on the path toward large-scale superconductor-based quantum computing due to their better coherence and larger anharmonicity. A major challenge for multi-qubit fluxonium devices is the experimental demonstration of a scalable crosstalk-free multi-qubit architecture with high-fidelity single-qubit and two-qubit gates, single-shot readout, and state initialization. Here, we present a two-qubit fluxonium-based quantum processor with a tunable coupler element. We experimentally demonstrate fSim-type and controlled-Z-gates with 99.55 and 99.23% fidelities, respectively. The residual ZZ interaction is suppressed down to the few kHz levels. Using a galvanically coupled flux control line, we implement high-fidelity single-qubit gates and ground state initialization with a single arbitrary waveform generator channel per qubit.

arXiv:2203.16302•npj Quantum Information•Nov 8, 2022•132 citations
Building a scalable universal high-performance quantum processor is a formidable challenge. In particular, the problem of realizing fast high-perfomance two-qubit gates of high-fidelity remains needful. Here we propose a building block for a scalable quantum processor consisting of two transmons and a tunable three-mode coupler allowing for a ZZ interaction control. We experimentally demonstrate the native CZ gate with the pulse duration of 60 ns achieving the two-qubit gate fidelity above 98%, limited mostly by qubit coherence time. Numerical simulations show that by optimizing the gate duration the fidelity can be pushed over 99.97%.
High-fidelity two-qubit gates are essential for scalable quantum computing. We present a scheme based on superconducting transmon qubits and a control pulse delivery protocol that enables arbitrary controlled-phase gates modulated solely by an independent arbitrary waveform generator pulse. We combined a tunable coupler design with bipolar flux-pulsing to demonstrate a high-fidelity gate with a peak performance of 99.5%99.5\%99.5%. Our gates inherit the advantages of both approaches: minimal residual ZZ coupling, built-in echo-like low-frequency noise protection, and time-scale control pulse reproducibility, while remaining easy to calibrate. We optimize the system energy levels to mitigate leakage to the coupler and suppress residual interactions. Numerical simulations of the scheme as three qutrits indicate that an error below 1×10−31 \times 10^{-3}1×10−3 is achievable. We confirm the scalability potential of the proposed scheme on high-fidelity 4-qubit and 8-qubit quantum processors
The development of high-fidelity two-qubit quantum gates is essential for digital quantum computing. Here, we propose and realize an all-microwave parametric controlled-Z (CZ) gates by coupling strength modulation in a superconducting Transmon qubit system with tunable couplers. After optimizing the design of the tunable coupler together with the control pulse numerically, we experimentally realized a 100 ns CZ gate with high fidelity of 99.38% ± 0.34% and the control error being 0.1%. We note that our CZ gates are not affected by pulse distortion and do not need pulse correction, providing a solution for the real-time pulse generation in a dynamic quantum feedback circuit. With the expectation of utilizing our all-microwave control scheme to reduce the number of control lines through frequency multiplexing in the future, our scheme draws a blueprint for the high-integrable quantum hardware design.
Tunable coupling of superconducting qubits has been widely studied due to its importance for isolated gate operations in scalable quantum processor architectures.Here, we demonstrate a tunable qubit-qubit coupler based on a floating transmon device, which allows us to place qubits at least 2 mm apart from each other while maintaining over 50-MHz coupling between the coupler and the qubits.In the introduced tunable-coupler design, both the qubit-qubit and the qubit-coupler couplings are mediated by two waveguides instead of relying on direct capacitive couplings between the components, reducing the impact of the qubit-qubit distance on the couplings.This leaves space for each qubit to have an individual readout resonator and a Purcell filter, which is needed for fast high-fidelity readout.In addition, simulations show that the large qubit-qubit distance significantly lowers unwanted non-nearest-neighbor coupling and allows multiple control lines to cross over the structure with minimal crosstalk.Using the proposed flexible and scalable architecture, we demonstrate a controlled-Z gate with (99.81 ± 0.02)% fidelity.
Future quantum information processors require tunable coupling architectures that can produce high-fidelity logical gates between two or more qubits. Parametric coupling is a powerful technique for generating tunable interactions between many qubits. Here, we present a highly flexible parametric coupling scheme with superconducting qubits that provides complete removal of residual Z Z coupling and the implementation of driven SWAP or SWAP-free controlled- Z ( C Z ) gates. Our fully integrated two-dimensional on-chip coupler design is only weakly flux tunable, cancels static linear coupling between the qubits, avoids internal coupler dynamics or excitations, and is extensible to multiqubit circuit-QED systems. Exploring gate fidelity versus gate duration allows us to maximize two-qubit gate fidelity, while providing insights into possible error sources for these gates. Randomized benchmarking over several hours reveals that the parametric SWAP C Z gate achieves an average fidelity of 99.44 ± 0.09 % in a gate duration of 70 ns and that a dispersively driven parametric SWAP-free C Z gate attains an average fidelity of 99.47 ± 0.07 % in only 30 ns. The fidelity remained above this value for over 8 h and peaked twice with a maximum of 99.67 ± 0.14 % . Overall, our parametric approach combines versatility, precision, speed, and high performance in one compact coupler design.
Superconducting quantum processors have largely converged on transmon-based architectures, while alternative qubit modalities with intrinsic error protection have lacked a demonstrated path to scalable system integration. In particular, although tunable-coupler-mediated interactions have been validated for small fluxonium systems, it remains unclear whether such designs can be scaled to a multi-qubit lattice. Here, we establish a scalable fluxonium processor architecture based on a modular qubit-coupler unit cell engineered to suppress residual interactions and spectator errors in a many-qubit lattice. The system enables parallel single-qubit gate fidelities approaching 99.99% and two-qubit CZ gate fidelities around 99%. With an optimized gate duration of 32 ns, the best CZ gate fidelity reaches 99.9%. We further validate this architecture in a 22-qubit processor based on the same configuration, where parallel operations enable the deterministic generation of Greenberger-Horne-Zeilinger states involving up to 10 qubits. Together, these results demonstrate that the fluxonium-tunable-coupler unit cell composes without emergent interaction pathologies and establish fluxonium as a scalable superconducting qubit platform.
Abstract Superconducting fluxonium qubits provide a promising alternative to transmons on the path toward large-scale superconductor-based quantum computing due to their better coherence and larger anharmonicity. A major challenge for multi-qubit fluxonium devices is the experimental demonstration of a scalable crosstalk-free multi-qubit architecture with high-fidelity single-qubit and two-qubit gates, single-shot readout, and state initialization. Here, we present a two-qubit fluxonium-based quantum processor with a tunable coupler element. We experimentally demonstrate fSim-type and controlled-Z-gates with 99.55 and 99.23% fidelities, respectively. The residual ZZ interaction is suppressed down to the few kHz levels. Using a galvanically coupled flux control line, we implement high-fidelity single-qubit gates and ground state initialization with a single arbitrary waveform generator channel per qubit.