Quantum computing has the potential for disruptive change in many sectors of industry, especially in materials science and optimization. In this paper, we describe how the turbine balancing problem can be solved with quantum computing, which is the NP-hard optimization problem of analytically balancing rotor blades in a single plane as found in turbine assembly. Small yet relevant instances occur in industry, which makes the problem interesting for early quantum computing benchmarks. We model it as a quadratic unconstrained binary optimization problem and compare the performance of a classical rule-based heuristic and D-Wave Systems' quantum annealer Advantage_system4.1. In this case study, we use real-world as well as synthetic datasets and observe that the quantum hardware significantly improves an actively used heuristic's solution for small-scale problem instances with bare disk imbalance in terms of solution quality. Motivated by this performance gain, we subsequently design a quantum-inspired classical heuristic based on simulated annealing that achieves very good results on all given problem instances, essentially solving the optimization problem sufficiently well for all considered datasets, according to industrial requirements.
Quantum computing has the potential for disruptive change in many sectors of industry, especially in materials science and optimization. In this paper, we describe how the turbine balancing problem can be solved with quantum computing, which is the NP-hard optimization problem of analytically balancing rotor blades in a single plane as found in turbine assembly. Small yet relevant instances occur in industry, which makes the problem interesting for early quantum computing benchmarks. We model it as a quadratic unconstrained binary optimization problem and compare the performance of a classical rule-based heuristic and D-Wave Systems' quantum annealer Advantage_system4.1. In this case study, we use real-world as well as synthetic datasets and observe that the quantum hardware significantly improves an actively used heuristic's solution for small-scale problem instances with bare disk imbalance in terms of solution quality. Motivated by this performance gain, we subsequently design a quantum-inspired classical heuristic based on simulated annealing that achieves very good results on all given problem instances, essentially solving the optimization problem sufficiently well for all considered datasets, according to industrial requirements.
Quantum computing has emerged as a promising computational paradigm with the potential to solve problems that are intractable for classical computers. This paper provides an overview of the current state of quantum computing, including its historical development, hardware advancements, applications, and challenges. Special attention is given to combinatorial optimization, which is considered one of the most promising application domains. The limitations of current quantum systems and future research directions are also discussed. This paper presents a comparative study between a conventional D-Wave-based simulated annealing approach and a proposed hybrid optimization model for solving largescale combinatorial optimization problems. The study focuses on benchmark problems, including AES, TSP gr24, and a real-world load balancing problem, all formulated as QUBO models. The D-Wave approach employs the dwave-neal simulated annealing engine with various parameter settings, while the proposed model introduces a decomposition-based framework combined with adaptive parameter control and iterative refinement. The experimental results demonstrate that the proposed model consistently outperforms the conventional approach in terms of solution quality, achieving significantly lower energy values across all problem instances. In particular, for the TSP gr24 problem, the proposed model achieves near-optimal solutions with substantially reduced computation time. For large-scale problems such as AES and load balancing, the proposed model maintains scalability and robustness, whereas the conventional approach suffers from increased computational cost and performance degradation. Although the proposed method introduces additional computational steps, its hybrid structure effectively mitigates limitations related to local minima, parameter sensitivity, and scalability. These findings indicate that integrating classical optimization techniques with quantum-inspired methods is essential for practical applications. The proposed model provides a promising framework for solving complex real-world optimization problems and highlights the importance of hybrid approaches in advancing quantum annealing technologies.
The even distribution and optimization of tasks across resources and workstations is a critical process in manufacturing aimed at maximizing efficiency, productivity, and profitability, known as Robotic Assembly Line Balancing (RALB). With the increasing complexity of manufacturing required by mass customization, traditional computational approaches struggle to solve RALB problems efficiently. To address these scalability challenges, we investigate applying quantum computing, particularly quantum annealing, to the real-world based problem. We transform the integer programming formulation into a quadratic unconstrained binary optimization problem, which is then solved using a hybrid quantum-classical algorithm on the D-Wave Advantage 4.1 quantum computer. In a case study, the quantum solution is compared to an exact solution, demonstrating the potential for quantum computing to enhance manufacturing productivity and reduce costs. Nevertheless, limitations of quantum annealing, including hardware constraints and problem-specific challenges, suggest that continued advancements in quantum technology will be necessary to improve its applicability to RALB manufacturing optimization.
This study introduces an innovative application of Parallel Quantum Annealing (PQA) to concurrently solve multiple NP-hard problems on a quantum annealer, leveraging unused qubits on D-Wave's Pegasus architecture to enhance efficiency and accuracy. While parallel execution of different problems on the same quantum annealing device has been previously explored, our application extends the current PQA method, which typically solves a single problem multiple times or different problems with minor embedded combinatorial optimization. This study primarily focuses on three NP-hard problems relevant to integrated circuit design: the Graph Coloring Problem (GCP), the Minimum Vertex Cover Problem (MVCP), and the Graph Partitioning Problem (GPP). After formulating these problems as Quadratic Unconstrained Binary Optimization (QUBO), they were embedded into the D-Wave quantum annealing machine, and the annealing process was run on the combined QUBO. The results were subsequently decoded into individual problems. Our results, quantified via the Time-To-Target (TTT) metric, showcased enhanced efficiency and accuracy in reaching target solutions, indicating a substantial improvement over traditional Quantum Annealing (QA) and Simulated Annealing (SA) methods. The research illustrates the potential of quantum computing for solving complex real-world problems more efficiently and emphasizes the importance of leveraging all available qubits in quantum annealers. The findings can significantly contribute to the development and optimization of quantum computing methods and have broad application implications, particularly in areas where NP-hard problems are prevalent.
To increase efficiency in automotive manufacturing, newly produced vehicles can move autonomously from the production line to the distribution area. This requires an optimal placement of sensors to ensure full coverage while minimizing the number of sensors used. The underlying optimization problem poses a computational challenge due to its large-scale nature. Currently, classical solvers rely on heuristics, often yielding nonoptimal solutions for large instances, resulting in suboptimal sensor distributions and increased operational costs. We explore quantum computing methods that may outperform classical heuristics in the future. We implemented quantum annealing with D-Wave, transforming the problem into a quadratic unconstrained binary optimization formulation with one-hot and binary encoding. Hyperparameters like the penalty terms and the annealing time are optimized and the results are compared with default parameter settings. Our results demonstrate that quantum annealing is capable of solving instances derived from real-world scenarios. Through the use of decomposition techniques, we are able to scale the problem size further, bringing it closer to practical, industrial applicability. Through this work, we provide key insights into the importance of quantum annealing parametrization, demonstrating how quantum computing could contribute to cost-efficient, large-scale optimization problems once the hardware matures.
The recent availability of the first commercial quantum computers has provided a promising tool to tackle NP hard problems which can only be solved heuristically with present techniques. However, it is unclear if the current state of quantum computing already provides a quantum advantage over the current state of the art in classical computing. This article assesses the performance of the D-Wave 2X quantum annealer on two NP hard graph problems, in particular clique finding and graph partitioning. For this, we provide formulations as Qubo and Ising Hamiltonians suitable for the quantum annealer and compare a variety of quantum solvers (Sapi, QBSolv, QSage provided by D-Wave Sys, Inc.) to current classical algorithms (METIS, Simulated Annealing, third-party clique finding and graph splitting heuristics) on certain test sets of graphs. We demonstrate that for small graph instances, classical methods still outperform the quantum annealer in terms of computing time, even though the quality of the best solutions obtained is comparable. Nevertheless, due to the limited problem size which can be embedded on the D-Wave 2X chip, the aforementioned finding applies to most of problems of general nature solvable on the quantum annealer. For instances specifically designed to fit the D-Wave 2X architecture, we observe substantial speed-ups in computing time over classical approaches.
Abstract Disassembly is the core of sustainable recovery processes, enabling the reuse, remanufacturing, and recycling of end-of-life products. Disassembly Sequence Optimization (DSO) is the key to achieving practical and efficient disassembly applications in industrial scenarios. This study presents a novel approach to DSO by leveraging Quantum Annealing (QA) through Quadratic Unconstrained Binary Optimization (QUBO) and Constrained Quadratic Model (CQM) formulations integrated with CAD-based assembly designs. The proposed methods aim to address computational challenges in industrial disassembly applications. We evaluated these methods against classical heuristics using two distinct product designs. For a smaller, denser assembly, the hybrid CQM model demonstrated superior performance in terms of solution quality and computational time. Conversely, for a larger, sparser assembly, a classical heuristic achieved better results in solution quality when constraining computational time compared to the hybrid quantum approaches. The QUBO model, although did not overcome classical, showed promise in exploring solution spaces, obtaining better solution quality than CQM for the larger problem. These findings indicate that the current practical utility of quantum annealing for DSO is influenced by problem size, structure, and hybrid workflow efficiency. Future research should focus on optimizing the balance between classical and quantum resources to further enhance efficiency. As quantum hardware continues to advance, these formulations have the potential to revolutionize sustainable manufacturing by optimizing disassembly planning with greater efficiency and adaptability to large assemblies.