Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2404.18745 · Physics Letters A

Positive and non-positive measurements in energy distillation from quantum batteries

Paranjoy Chaki, Aparajita Bhattacharyya, Kornikar Sen, Ujjwal Sen

Published Jul 31, 2026• 18 citations
arXivHTMLPDF

Abstract

We investigate energy distillation from quantum batteries within the framework of generalized quantum measurements, including both positive operator-valued measurements (POVMs) and physically realizable non-positive operator-valued measurements (NPOVMs) performed on an auxiliary system coupled to the battery. Two classes of NPOVMs, namely type-1 and type-2, are analyzed in the presence of environmental noise acting on the auxiliary system. We derive general expressions for the distillable energy corresponding to positive and non-positive measurements and show that the distillable energy obtained via NPOVMs remains robust against environmental noise. For a specific model, we demonstrate that the energy extracted using type-1 NPOVMs exceeds or equals that obtained via POVMs under amplitude-damping, dephasing, and bit-flip noise, while type-2 NPOVMs outperform POVMs under amplitude-damping noise. These results establish a clear operational advantage of NPOVMs for energy extraction. We also analyze restricted measurement settings and compare the accessible distillable energy for constrained positive and type-1 non-positive measurements.

DOI
10.1016/j.physleta.2026.132050

Related papers

Auxiliary-assisted energy distillation from quantum batteries

Paranjoy Chaki, Aparajita Bhattacharyya, Kornikar Sen +1 more

We discuss the idea of extracting energy from a quantum battery, applying a projective measurement on an auxiliary system. The battery is initially connected to the auxiliary system and allowed to interact with it. After some time, we execute a measurement on the auxiliary system which probabilistically projects the setup to a particular state, and the corresponding state of the battery is the final state. We consider the sum of the product of the energy difference between the initial and final states of the battery with the probability of getting that final state, where the sum is taken over all the preferable outcomes, that is, the outcomes which reduce the energy of the battery. We define the maximum value of this quantity as the distillable energy, where the maximization is taken over the time of interaction and auxiliary state and measurement basis parameters. Restricting ourselves to a particular uncountable set of states, we find that distillable energy is always higher than the ergotropy of the battery, irrespective of the presence or absence of entanglement between battery and auxiliary. We also compare the distillable energy with the energy extracted using the interaction between the battery and the auxiliary without any measurements. In comparison with the measurement-free scenario, we show that while measurement-based protocols do not provide any enhancement in the amount of extractable energy, they do yield a distinct advantage in terms of power, most notably in the case of distillable power, surpassing the power obtained without measurements. We show that the average of extracted energy overall measurement outcomes is independent of the applied measurement and equivalent to applying no measurement. Additionally, we find that the advantage in power for measurement-based energy extraction reduces with the increase in the size of the battery if the dimension of the auxiliary is kept fixed. Finally, we find that the ground state is the only state for which distillable energy is zero. We also analyze the behavior of the maximum value (maximization done over the same parameters as in the case of distillable energy) of the product of the probability of getting a particular suitable outcome and the energy difference of the corresponding initial and final states of the battery, which is referred to as maximum probabilistically extractable energy.

arXiv:2307.16856•Physical Review A•Nov 21, 2025•20 citations

Fluctuation in energy extraction from quantum batteries: How open should the system be to control it?

Sarkar, Anindita, Paranjoy Chaki, Priya Ghosh +1 more

We ask whether there exists a relation between controllability of the fluctuations in extractable energy of a quantum battery and (a) how open an arbitrary but fixed battery system is and (b) how large the battery is. We examine three classes of quantum processes for the energy extraction: unitary operations, completely positive trace-preserving (CPTP) maps, and arbitrary quantum maps, including physically realizable non-CPTP maps. We show that all three process classes yield the same average extractable energy from a fixed quantum battery. Moreover, open systems are better at controlling fluctuations in fixed quantum batteries: while random unitary operations result in nonzero fluctuation in the extractable energy, the remaining two classes lead to vanishing fluctuations in extractable energy. Furthermore, when the auxiliary system used to implement the non-unitary physically realizable maps is restricted up to a dimension $n$, fluctuation in extractable energy scales as $1/n$ for CPTP maps, outperforming the $\ln{n}/n$ scaling observed for general quantum maps. Even within open dynamics, therefore, energy extraction via random CPTP maps exhibits greater resilience to fluctuation compared to processes based on arbitrary quantum maps. We subsequently obtain that fluctuations in extractable energy scale as the inverse of the battery's dimension for all three process classes. Unitary maps, therefore, perform - in the sense of as low fluctuation as possible - equally well as more resource-intensive open maps, provided we have access to large quantum batteries. The results underscore a fundamental trade-off between performance of a battery and the resource cost of implementing the extraction processes.

arXiv:2505.16851•May 22, 2025•14 citations

Quantum work extraction efficiency for noisy quantum batteries: The role of coherence

Salvatore Tirone, Raffaele Salvia, Stefano Chessa +1 more

Quantum work capacitances and maximal asymptotic work/energy ratios are figures of merit characterizing the robustness against noise of work extraction processes in quantum batteries formed by collections of quantum systems. In this paper we establish a direct connection between these functionals and, exploiting this result, we analyze different types of noise models mimicking self-discharging (amplitude damping channels), thermalization (generalized amplitude damping channels), and dephasing effects (simultaneous phase-amplitude damping channels). In this context we show that input quantum coherence can significantly improve the storage performance of noisy quantum batteries and that the maximum output ergotropy is not always achieved by the maximum available input energy.

arXiv:2305.16803•Physical Review A•Jan 7, 2025•40 citations

Optimal work extraction in measurement-based quantum Otto engines: Non-adiabaticity and generalized measurements can be beneficial

Arunabha Das, Sayan Mondal, Debarupa Saha +1 more

Measurement-based quantum heat engines have attracted significant interest as alternatives to conventional thermal engines, as they replace the hot thermal reservoir with quantum measurements, thereby offering greater controllability and simpler implementation. Motivated by these advantages, we investigate a measurement-driven quantum Otto engine with a qubit working substance and study the optimal work extractable from such engines, including whether their performance can surpass that of conventional quantum Otto cycles. We analyze the engine in both the infinite-time (adiabatic) and finite-time (non-adiabatic) regimes, considering two distinct implementations obtained through optimization over all projection-valued measurements (PVMs) and over all two-outcome positive operator-valued measurements (POVMs). We show that measurement-based engines can outperform conventional quantum Otto engines within specific parameter regimes and that POVM-based engines can yield higher optimal work extraction than PVM-based ones. Furthermore, by incorporating the thermodynamic cost associated with resetting the auxiliary system required for POVM implementation, we demonstrate that the resulting net work output can still exceed that of PVM-based engines under suitable conditions on the spectral gaps and cold bath temperature. We also identify regimes in which non-adiabatic implementations can yield higher work output and efficiency than their adiabatic counterparts. Our study provides operational guidelines for designing improved measurement-driven quantum Otto engines.

quant-pharXiv:2605.22583•May 22, 2026•0 citations

Enhancing work-extraction in quantum batteries via correlated reservoirs

Sejal Ahuja, Tanoy Kanti Konar, Aditi Sen De

Going beyond isolated system dynamics, we examine how local and spatially correlated reservoirs influence the work extraction in quantum batteries. By employing a one-dimensional spin-1/2 model coupled to baths via dephasing and amplitude-damping noise, we demonstrate that correlations in reservoirs can significantly enhance battery's performance compared to local noise. In the dephasing scenario, we prove that correlated reservoirs produce a finite amount of extractable work, or ergotropy, during the transient regime when a two-cell battery is initialized in a product state while local noise yields vanishing ergotropy at all times, despite nonvanishing stored energy in both cases. Numerical simulations confirm that this advantage persists across larger system sizes and for both entangled and product initial states. We also find that the dynamics of quantum coherence closely mirror those of ergotropy, highlighting coherence as a key resource underlying the enhanced performance of quantum batteries. Further, we observe that the fraction of stored energy extracted from quantum batteries displays a sharper contrast between the correlated and local reservoirs. Moreover, for dephasing noise, this fraction remains independent of system size, whereas in the amplitude damping case, it exhibits a clear system-size dependence within the transient regime, highlighting distinct operational behaviors under different noise models. In addition, we reveal that when the battery dynamics is governed by an effective Hamiltonian with long-range interactions, it yields higher ergotropy compared to short-range interactions, emphasizing the advantages of reservoir engineering for efficient device design.

arXiv:2509.25109•Sep 29, 2025•5 citations

Robust certification of non-projective measurements: theory and experiment

Raphael Brinster, Peter Tirler, Shishir Khandelwal +7 more

Determining the conditions under which positive operator-valued measures (POVMs), the most general class of quantum measurements, outperform projective measurements remains a challenging and largely unresolved problem. Of particular interest are projectively simulable POVMs, which can be realized through probabilistic mixtures of projective measurements, and therefore offer no advantage over projective schemes. Characterizing the boundary between simulable and non-simulable POVMs is, however, a difficult task, and existing tools either fail to scale efficiently, provide limited experimental feasibility or work only for specific POVMs. Here, we introduce and demonstrate a general method to certify non-simulability of a POVM by introducing a complete hierarchy of semidefinite programs. It provides upper bounds on the non-simulability measure of critical visibility of arbitrary POVMs which are tight in many cases and outperform previously known criteria. We experimentally certify the non-simulability of two- and three-dimensional POVMs using a trapped-ion qudit quantum processor by constructing non-simulability witnesses and introduce a modification of our framework that makes them robust against state preparation errors. Finally, we extend our results to the setting where an additional ancilla system is available.

quant-pharXiv:2511.04446•PRX Quantum•Nov 7, 2025•4 citations
We investigate energy distillation from quantum batteries within the framework of generalized quantum measurements, including both positive operator-valued measurements (POVMs) and physically realizable non-positive operator-valued measurements (NPOVMs) performed on an auxiliary system coupled to the battery. Two classes of NPOVMs, namely type-1 and type-2, are analyzed in the presence of environmental noise acting on the auxiliary system. We derive general expressions for the distillable energy corresponding to positive and non-positive measurements and show that the distillable energy obtained via NPOVMs remains robust against environmental noise. For a specific model, we demonstrate that the energy extracted using type-1 NPOVMs exceeds or equals that obtained via POVMs under amplitude-damping, dephasing, and bit-flip noise, while type-2 NPOVMs outperform POVMs under amplitude-damping noise. These results establish a clear operational advantage of NPOVMs for energy extraction. We also analyze restricted measurement settings and compare the accessible distillable energy for constrained positive and type-1 non-positive measurements.
We discuss the idea of extracting energy from a quantum battery, applying a projective measurement on an auxiliary system. The battery is initially connected to the auxiliary system and allowed to interact with it. After some time, we execute a measurement on the auxiliary system which probabilistically projects the setup to a particular state, and the corresponding state of the battery is the final state. We consider the sum of the product of the energy difference between the initial and final states of the battery with the probability of getting that final state, where the sum is taken over all the preferable outcomes, that is, the outcomes which reduce the energy of the battery. We define the maximum value of this quantity as the distillable energy, where the maximization is taken over the time of interaction and auxiliary state and measurement basis parameters. Restricting ourselves to a particular uncountable set of states, we find that distillable energy is always higher than the ergotropy of the battery, irrespective of the presence or absence of entanglement between battery and auxiliary. We also compare the distillable energy with the energy extracted using the interaction between the battery and the auxiliary without any measurements. In comparison with the measurement-free scenario, we show that while measurement-based protocols do not provide any enhancement in the amount of extractable energy, they do yield a distinct advantage in terms of power, most notably in the case of distillable power, surpassing the power obtained without measurements. We show that the average of extracted energy overall measurement outcomes is independent of the applied measurement and equivalent to applying no measurement. Additionally, we find that the advantage in power for measurement-based energy extraction reduces with the increase in the size of the battery if the dimension of the auxiliary is kept fixed. Finally, we find that the ground state is the only state for which distillable energy is zero. We also analyze the behavior of the maximum value (maximization done over the same parameters as in the case of distillable energy) of the product of the probability of getting a particular suitable outcome and the energy difference of the corresponding initial and final states of the battery, which is referred to as maximum probabilistically extractable energy.
We ask whether there exists a relation between controllability of the fluctuations in extractable energy of a quantum battery and (a) how open an arbitrary but fixed battery system is and (b) how large the battery is. We examine three classes of quantum processes for the energy extraction: unitary operations, completely positive trace-preserving (CPTP) maps, and arbitrary quantum maps, including physically realizable non-CPTP maps. We show that all three process classes yield the same average extractable energy from a fixed quantum battery. Moreover, open systems are better at controlling fluctuations in fixed quantum batteries: while random unitary operations result in nonzero fluctuation in the extractable energy, the remaining two classes lead to vanishing fluctuations in extractable energy. Furthermore, when the auxiliary system used to implement the non-unitary physically realizable maps is restricted up to a dimension nnn, fluctuation in extractable energy scales as 1/n1/n1/n for CPTP maps, outperforming the ln⁡n/n\ln{n}/nlnn/n scaling observed for general quantum maps. Even within open dynamics, therefore, energy extraction via random CPTP maps exhibits greater resilience to fluctuation compared to processes based on arbitrary quantum maps. We subsequently obtain that fluctuations in extractable energy scale as the inverse of the battery's dimension for all three process classes. Unitary maps, therefore, perform - in the sense of as low fluctuation as possible - equally well as more resource-intensive open maps, provided we have access to large quantum batteries. The results underscore a fundamental trade-off between performance of a battery and the resource cost of implementing the extraction processes.
Quantum work capacitances and maximal asymptotic work/energy ratios are figures of merit characterizing the robustness against noise of work extraction processes in quantum batteries formed by collections of quantum systems. In this paper we establish a direct connection between these functionals and, exploiting this result, we analyze different types of noise models mimicking self-discharging (amplitude damping channels), thermalization (generalized amplitude damping channels), and dephasing effects (simultaneous phase-amplitude damping channels). In this context we show that input quantum coherence can significantly improve the storage performance of noisy quantum batteries and that the maximum output ergotropy is not always achieved by the maximum available input energy.
Measurement-based quantum heat engines have attracted significant interest as alternatives to conventional thermal engines, as they replace the hot thermal reservoir with quantum measurements, thereby offering greater controllability and simpler implementation. Motivated by these advantages, we investigate a measurement-driven quantum Otto engine with a qubit working substance and study the optimal work extractable from such engines, including whether their performance can surpass that of conventional quantum Otto cycles. We analyze the engine in both the infinite-time (adiabatic) and finite-time (non-adiabatic) regimes, considering two distinct implementations obtained through optimization over all projection-valued measurements (PVMs) and over all two-outcome positive operator-valued measurements (POVMs). We show that measurement-based engines can outperform conventional quantum Otto engines within specific parameter regimes and that POVM-based engines can yield higher optimal work extraction than PVM-based ones. Furthermore, by incorporating the thermodynamic cost associated with resetting the auxiliary system required for POVM implementation, we demonstrate that the resulting net work output can still exceed that of PVM-based engines under suitable conditions on the spectral gaps and cold bath temperature. We also identify regimes in which non-adiabatic implementations can yield higher work output and efficiency than their adiabatic counterparts. Our study provides operational guidelines for designing improved measurement-driven quantum Otto engines.
Going beyond isolated system dynamics, we examine how local and spatially correlated reservoirs influence the work extraction in quantum batteries. By employing a one-dimensional spin-1/2 model coupled to baths via dephasing and amplitude-damping noise, we demonstrate that correlations in reservoirs can significantly enhance battery's performance compared to local noise. In the dephasing scenario, we prove that correlated reservoirs produce a finite amount of extractable work, or ergotropy, during the transient regime when a two-cell battery is initialized in a product state while local noise yields vanishing ergotropy at all times, despite nonvanishing stored energy in both cases. Numerical simulations confirm that this advantage persists across larger system sizes and for both entangled and product initial states. We also find that the dynamics of quantum coherence closely mirror those of ergotropy, highlighting coherence as a key resource underlying the enhanced performance of quantum batteries. Further, we observe that the fraction of stored energy extracted from quantum batteries displays a sharper contrast between the correlated and local reservoirs. Moreover, for dephasing noise, this fraction remains independent of system size, whereas in the amplitude damping case, it exhibits a clear system-size dependence within the transient regime, highlighting distinct operational behaviors under different noise models. In addition, we reveal that when the battery dynamics is governed by an effective Hamiltonian with long-range interactions, it yields higher ergotropy compared to short-range interactions, emphasizing the advantages of reservoir engineering for efficient device design.
Determining the conditions under which positive operator-valued measures (POVMs), the most general class of quantum measurements, outperform projective measurements remains a challenging and largely unresolved problem. Of particular interest are projectively simulable POVMs, which can be realized through probabilistic mixtures of projective measurements, and therefore offer no advantage over projective schemes. Characterizing the boundary between simulable and non-simulable POVMs is, however, a difficult task, and existing tools either fail to scale efficiently, provide limited experimental feasibility or work only for specific POVMs. Here, we introduce and demonstrate a general method to certify non-simulability of a POVM by introducing a complete hierarchy of semidefinite programs. It provides upper bounds on the non-simulability measure of critical visibility of arbitrary POVMs which are tight in many cases and outperform previously known criteria. We experimentally certify the non-simulability of two- and three-dimensional POVMs using a trapped-ion qudit quantum processor by constructing non-simulability witnesses and introduce a modification of our framework that makes them robust against state preparation errors. Finally, we extend our results to the setting where an additional ancilla system is available.