Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2404.17431 · Physical Review A

Quantum information engines: Bounds on performance metrics by measurement time

Henning Kirchberg, Abraham Nitzan

Published Aug 8, 2025• 7 citations
arXivHTMLPDF

Abstract

Information engines, sometimes referred to as Maxwell Demon engines, utilize information obtained through measurement to control the conversion of energy into useful work. Discussions around such devices often assume the measurement step to be instantaneous, assessing its cost by Landauer's information erasure within the measurement device. While this simplified perspective is sufficient for classical feedback-controlled engines, for nanoengines that often operate in the quantum realm, the overall performance may be significantly affected by the measurement duration (which may be comparable to the engine's cycle time) and cost (energy needed to create the system-meter correlation). In this study, we employ a generalized von Neumann measurement model to highlight that obtaining a finite amount of information requires a finite measurement time and incurs an energetic cost. We investigate the crucial role of these factors in determining the engine's performance, particularly in terms of efficiency and power output. Furthermore, for the information engine model under consideration, we establish a precise relationship between the acquired information in the measurement process and the maximum energy extractable through the measurement. We also discuss ways to extend our considerations using these concepts, such as in measurement-enhanced photochemical reactions.

DOI
10.1103/vdm1-4ryg

Related papers

Coherence-enhanced efficiency of feedback-driven quantum engines

Kay Brandner, Michael Bauer, M. Schmid +1 more

A genuine feature of projective quantum measurements is that they inevitably alter the mean energy of the observed system if the measured quantity does not commute with the Hamiltonian. Compared to the classical case, Jacobs proved that this additional energetic cost leads to a stronger bound on the work extractable after a single measurement from a system initially in thermal equilibrium (2009 Phys. Rev. A 80 012322 ). Here, we extend this bound to a large class of feedback-driven quantum engines operating periodically and in finite time. The bound thus implies a natural definition for the efficiency of information to work conversion in such devices. For a simple model consisting of a laser-driven two-level system, we maximize the efficiency with respect to the observable whose measurement is used to control the feedback operations. We find that the optimal observable typically does not commute with the Hamiltonian and hence would not be available in a classical two level system. This result reveals that periodic feedback engines operating in the quantum realm can exploit quantum coherences to enhance efficiency.

arXiv:1503.04865•New Journal of Physics•Jun 4, 2015•102 citations

Optimising finite-time quantum information engines using Pareto bounds

Rasmus Hagman, Jonas Berx, Janine Splettstoesser +1 more

Abstract Information engines harness measurement and feedback to convert energy into useful work. In this study, we investigate the fundamental trade-offs between ergotropic output power, thermodynamic efficiency and information-to-work conversion efficiency in such engines, explicitly accounting for the finite time required for measurement. As a model engine, we consider a two-level quantum system from which work is extracted via a temporarily coupled quantum harmonic oscillator that serves as the measurement device. This quantum device is subsequently read out by a classical apparatus. We compute trade-offs for the performance of the information engine using Pareto optimisation, which has recently been successfully used to optimise performance in engineering and biological physics. Our results offer design principles for future experimental implementations of information engines, such as in nano-mechanical systems and circuit quantum electrodynamics (QED) platforms.

arXiv:2507.00712•New Journal of Physics•Oct 29, 2025•4 citations

Information as a Physical Resource: Quantum Maxwell Demon Arrays and the Thermodynamics of Measurement

MARLON BULAQUEÑA

Information is usually treated as something we use to describe the physical world. In modern physics, however, there is growing evidence that information itself behaves like a physical resource, subject to the same laws that govern energy, heat, and matter. This paper develops that perspective through a concrete experimental proposal we call Quantum Maxwell Demon Arrays (QMDA)—systems that use measurement and feedback at the quantum scale to convert information about a system into controlled physical work. Building on established results such as the Landauer bound and the Szilard engine, we show that information acquired through measurement can be converted into usable free energy, provided that its physical costs and constraints are properly accounted for. In QMDA, measurements are not passive observations but active physical interactions whose outcomes can be stored, processed, and exploited thermodynamically. Organized into arrays, these measurement–feedback units act collectively, allowing information flow itself to shape energy extraction, entropy production, and system control. We demonstrate how QMDA can serve as experimental probes of information thermodynamics, enabling direct tests of how information constrains and enables physical processes in quantum regimes. This framework clarifies the status of measurement as a physical operation rather than a subjective act of interpretation, and it suggests new pathways toward ultra-efficient computation, precision sensing, and energy management within known thermodynamic limits. More broadly, this work supports the view that information is not merely a bookkeeping device for observers, but a fundamental ingredient of physical dynamics—one that can be quantified, manipulated, and transformed into free energy under well-defined physical rules.

•Jan 1, 2026•0 citations

Overcoming the Quasi-Static Bottleneck: A Finite-Time Quantum Otto Information Engine Achieving Near-Unity Efficiency

Yang Xiao, Jin Wang

Generally, quantum heat engines driven by Gibbs reservoirs achieve their maximum work and efficiency only in quasi-static processes, a constraint that hampers practical applications due to the resulting vanishing power output. To address this fundamental limitation, we propose a finite-time quantum Otto information engine (OIE) driven by a Maxwell's demon paired with a single Gibbs reservoir. We demonstrate that the demon's measurement and feedback control can preserve quantum coherence to extract coherent work, while harnessing quantum internal friction as a work source. Consequently, the OIE can produce work by only modulating the eigenstates of the Hamiltonian, and surpass the quasi-static limits of its conventional counterpart in the work output and the efficiency, which accounts for the energetic cost of the demon. Notably, the OIE can achieve near-perfect efficiency alongside positive work extraction in the rapid-driving regime.

quant-pharXiv:2609.22821•Sep 22, 2026•0 citations

Extracting Work from Quantum Measurement in Maxwell’s Demon Engines

Cyril Elouard, David A. Herrera-Martí, Benjamin Huard +1 more

The essence of both classical and quantum engines is to extract useful energy (work) from stochastic energy sources, e.g., thermal baths. In Maxwell's demon engines, work extraction is assisted by a feedback control based on measurements performed by a demon, whose memory is erased at some nonzero energy cost. Here we propose a new type of quantum Maxwell's demon engine where work is directly extracted from the measurement channel, such that no heat bath is required. We show that in the Zeno regime of frequent measurements, memory erasure costs eventually vanish. Our findings provide a new paradigm to analyze quantum heat engines and work extraction in the quantum world.

arXiv:1702.01917•Physical Review Letters•Jun 29, 2017•227 citations

Experimental Demonstration of a Measurement-Feedback Quantum Information Engine

Jinfeng Wei, Yingying Hong, Dehua Liu +8 more

Harnessing finite-time nonadiabatic transitions that are conventionally associated with quantum inner friction for useful work extraction remains an open experimental challenge. Here we address this issue by introducing and experimentally realizing an innovative measurement-feedback quantum information engine model in the trapped 40Ca+ ion system, in which the projective measurement replaces the hot reservoir as a nonthermal energy source and the feedback control conditionally steers the system through either unitary compression-expansion strokes or thermalization. We experimentally show that the repeated feedback cycle converges to a stable operating regime with a resolved energetic balance, and, by controlling the measurement angle and stroke duration, measurement-induced coherence and the finite-time nonadiabatic contribution can enhance work extraction and raise the efficiency above the corresponding Otto benchmark. The experimental results further show that, over finite ranges of stroke durations, the efficiency and intrinsic cycle power can increase simultaneously. Our experiment establishes a route toward information-to-work quantum engines that convert finite-time irreversibility into performance-enhancing resources.

quant-pharXiv:2607.28702•Jul 31, 2026•3 citations
Information engines, sometimes referred to as Maxwell Demon engines, utilize information obtained through measurement to control the conversion of energy into useful work. Discussions around such devices often assume the measurement step to be instantaneous, assessing its cost by Landauer's information erasure within the measurement device. While this simplified perspective is sufficient for classical feedback-controlled engines, for nanoengines that often operate in the quantum realm, the overall performance may be significantly affected by the measurement duration (which may be comparable to the engine's cycle time) and cost (energy needed to create the system-meter correlation). In this study, we employ a generalized von Neumann measurement model to highlight that obtaining a finite amount of information requires a finite measurement time and incurs an energetic cost. We investigate the crucial role of these factors in determining the engine's performance, particularly in terms of efficiency and power output. Furthermore, for the information engine model under consideration, we establish a precise relationship between the acquired information in the measurement process and the maximum energy extractable through the measurement. We also discuss ways to extend our considerations using these concepts, such as in measurement-enhanced photochemical reactions.
A genuine feature of projective quantum measurements is that they inevitably alter the mean energy of the observed system if the measured quantity does not commute with the Hamiltonian. Compared to the classical case, Jacobs proved that this additional energetic cost leads to a stronger bound on the work extractable after a single measurement from a system initially in thermal equilibrium (2009 Phys. Rev. A 80 012322 ). Here, we extend this bound to a large class of feedback-driven quantum engines operating periodically and in finite time. The bound thus implies a natural definition for the efficiency of information to work conversion in such devices. For a simple model consisting of a laser-driven two-level system, we maximize the efficiency with respect to the observable whose measurement is used to control the feedback operations. We find that the optimal observable typically does not commute with the Hamiltonian and hence would not be available in a classical two level system. This result reveals that periodic feedback engines operating in the quantum realm can exploit quantum coherences to enhance efficiency.
Abstract Information engines harness measurement and feedback to convert energy into useful work. In this study, we investigate the fundamental trade-offs between ergotropic output power, thermodynamic efficiency and information-to-work conversion efficiency in such engines, explicitly accounting for the finite time required for measurement. As a model engine, we consider a two-level quantum system from which work is extracted via a temporarily coupled quantum harmonic oscillator that serves as the measurement device. This quantum device is subsequently read out by a classical apparatus. We compute trade-offs for the performance of the information engine using Pareto optimisation, which has recently been successfully used to optimise performance in engineering and biological physics. Our results offer design principles for future experimental implementations of information engines, such as in nano-mechanical systems and circuit quantum electrodynamics (QED) platforms.
Information is usually treated as something we use to describe the physical world. In modern physics, however, there is growing evidence that information itself behaves like a physical resource, subject to the same laws that govern energy, heat, and matter. This paper develops that perspective through a concrete experimental proposal we call Quantum Maxwell Demon Arrays (QMDA)—systems that use measurement and feedback at the quantum scale to convert information about a system into controlled physical work. Building on established results such as the Landauer bound and the Szilard engine, we show that information acquired through measurement can be converted into usable free energy, provided that its physical costs and constraints are properly accounted for. In QMDA, measurements are not passive observations but active physical interactions whose outcomes can be stored, processed, and exploited thermodynamically. Organized into arrays, these measurement–feedback units act collectively, allowing information flow itself to shape energy extraction, entropy production, and system control. We demonstrate how QMDA can serve as experimental probes of information thermodynamics, enabling direct tests of how information constrains and enables physical processes in quantum regimes. This framework clarifies the status of measurement as a physical operation rather than a subjective act of interpretation, and it suggests new pathways toward ultra-efficient computation, precision sensing, and energy management within known thermodynamic limits. More broadly, this work supports the view that information is not merely a bookkeeping device for observers, but a fundamental ingredient of physical dynamics—one that can be quantified, manipulated, and transformed into free energy under well-defined physical rules.
Generally, quantum heat engines driven by Gibbs reservoirs achieve their maximum work and efficiency only in quasi-static processes, a constraint that hampers practical applications due to the resulting vanishing power output. To address this fundamental limitation, we propose a finite-time quantum Otto information engine (OIE) driven by a Maxwell's demon paired with a single Gibbs reservoir. We demonstrate that the demon's measurement and feedback control can preserve quantum coherence to extract coherent work, while harnessing quantum internal friction as a work source. Consequently, the OIE can produce work by only modulating the eigenstates of the Hamiltonian, and surpass the quasi-static limits of its conventional counterpart in the work output and the efficiency, which accounts for the energetic cost of the demon. Notably, the OIE can achieve near-perfect efficiency alongside positive work extraction in the rapid-driving regime.
The essence of both classical and quantum engines is to extract useful energy (work) from stochastic energy sources, e.g., thermal baths. In Maxwell's demon engines, work extraction is assisted by a feedback control based on measurements performed by a demon, whose memory is erased at some nonzero energy cost. Here we propose a new type of quantum Maxwell's demon engine where work is directly extracted from the measurement channel, such that no heat bath is required. We show that in the Zeno regime of frequent measurements, memory erasure costs eventually vanish. Our findings provide a new paradigm to analyze quantum heat engines and work extraction in the quantum world.
Harnessing finite-time nonadiabatic transitions that are conventionally associated with quantum inner friction for useful work extraction remains an open experimental challenge. Here we address this issue by introducing and experimentally realizing an innovative measurement-feedback quantum information engine model in the trapped 40Ca+ ion system, in which the projective measurement replaces the hot reservoir as a nonthermal energy source and the feedback control conditionally steers the system through either unitary compression-expansion strokes or thermalization. We experimentally show that the repeated feedback cycle converges to a stable operating regime with a resolved energetic balance, and, by controlling the measurement angle and stroke duration, measurement-induced coherence and the finite-time nonadiabatic contribution can enhance work extraction and raise the efficiency above the corresponding Otto benchmark. The experimental results further show that, over finite ranges of stroke durations, the efficiency and intrinsic cycle power can increase simultaneously. Our experiment establishes a route toward information-to-work quantum engines that convert finite-time irreversibility into performance-enhancing resources.