Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2404.16525 · Review of Scientific Instruments

An efficient method to generate near-ideal hollow beams of different shapes for box potential of quantum gases

Tongtong Ren, Yirong Wang, Xiaoyu Dai, Xiaoxu Gao, Guangren Sun, Xue Zhao, Kuiyi Gao, Zhiyue Zheng, Wei Zhang

Published Aug 1, 2024• 5 citations
arXivHTMLPDF

Abstract

Ultracold quantum gases are usually prepared in conservative traps for quantum simulation experiments. The atomic density inhomogeneity, together with the consequent position-dependent energy and time scales of cold atoms in traditional harmonic traps, makes it difficult to manipulate and detect the sample at a higher level. These problems are partially solved by optical box traps made of blue-detuned hollow beams. However, generating a high-quality hollow beam with high light efficiency for the box trap is challenging. Here, we present a scheme that combines the fixed optics, including axicons and prisms, to pre-shape a Gaussian beam into a hollow beam with a digital micromirror device (DMD) to improve the quality of the hollow beam further, providing a nearly ideal optical potential of various shapes for preparing highly homogeneous cold atoms. The highest power-law exponent of potential walls can reach a value over 100, and the light efficiency from a Gaussian to a hollow beam is also improved compared to direct optical shaping by a mask or a DMD. Combined with a one-dimensional optical lattice, a nearly ideal two-dimensional uniform quantum gas with different geometrical boundaries can be prepared for exploring quantum many-body physics to an unprecedented level.

DOI
10.1063/5.0217680

Related papers

Homogeneous one-dimensional optical lattice generation using a digital micromirror device-based high-precision beam shaper

Jinyang Liang, Michael F. Becker, Rudolph N. Kohn +1 more

A homogeneous one-dimensional optical lattice is demonstrated by using a high-precision beam shaper based on a digital micromirror device (DMD) with an imaging system containing a pinhole low-pass filter (LPF). This system is capable of producing a high-quality flattop beam profile to form a standing-wave optical lattice with a 50×50 μm2 flattop region. The periodic potential generated by the optical lattice confines ultracold atoms in Bose-Einstein condensate experiments. We conducted beam shaping tests at several wavelengths by implementing various coherent and incoherent light sources in the visible and infrared wavelength ranges. Experiments produced flattop and other well-controlled beam profiles with 0.2% to 0.26% root-mean-square (RMS) error after applying a digital LPF and nearly flat phase. Several concerns for the system design are presented. First, the energy requirement was determined by power conversion analysis and DMD diffraction efficiency simulation. In addition, a LabVIEW program was written to accelerate the speed of the iterative process for beam profile refinement. Finally, various camera calibrations improved the measurement accuracy. We achieved a 1.25% RMS error flattop beam with diameter of 70.4 μm at the atoms' plane. Other beam profile measurements in different diagnostic planes demonstrated a good intensity uniformity of the optical lattice.

Journal of Micro/Nanopatterning Materials and Metrology•May 21, 2012•29 citations

Configurable and dynamic trapping potentials for ultracold atoms using a DMD device (Conference Presentation)

Tyler W. Neely, Guillaume Gauthier, Isaac C. D. Lenton +3 more

The implementation of spatial light modulators (SLMs) in quantum gas experiments has allowed the realization of ever more complex trapping geometries. As ultracold atoms may be sensitive to perturbations of the trapping potential at the 1% level, the high contrast ratios of digital micromirror devices are proving advantageous for use in optical trapping. Our laboratory pursues configurable traps based on the direct (nearly diffraction limited) imaging of a digital micromirror device (DMD). We achieve highly flexible potentials using commercially available microscope objectives external to our vacuum chamber that directly project the DMD to the atom plane, producing optical traps over an area of 130 μm × 200 μm, with a resolution of 630(10) nm full width at half maximum (FWHM) at 532 nm illumination. We combine these potentials with a horizontally propagating TEM00 or TEM01 Hermite-Gaussian optical sheet that provides vertical confinement. With the dynamic control enabled by the maximum full-frame rate of 20 KHz and on-board storage of <13,000 frames of the DMD, we study the transport of atoms and superfluid dynamics in configurable trapping geometries. Using the fast frame rate of the DMD we also produce intermediate grey levels that complement half-toning techniques for producing optimized grayscale patterns.

•May 3, 2017•0 citations

Large and ultra-flat optical traps for uniform quantum gases

Kai Frye-Arndt, Matthew Glaysher, Brendan Rhyno +8 more

Ultracold atomic gases with uniform density can be created by flat-bottom optical traps. These gases provide an ideal platform to study many-body physics in a system that allows for simple connections with theoretical models and emulation of numerous effects from a wide range of fields of physics. In Earth-bound laboratories the trap sizes, number of species and states, as well as the range of physical effects are largely restricted by the adopted levitation technique. Homogeneous ultracold gases in microgravity simulators and space however offer an interesting perspective which is actively being pursued. To effectively make use of a gravity-compensated laboratory, realizing box potentials with large spatial extent enables access to previously inaccessible length scales and reduce finite-size and boundary effects. We present an approach based on two identical orthogonally aligned acousto-optic deflector setups to generate large time-averaged optical potentials with trapping volumes up to three orders of magnitude larger than conventional setups. These potentials follow power-law scalings with exponents of up to 152. We characterize the system and validate its performance through simulations of the mean-field ground state of a quantum gas, including dynamical excitations arising from the realistic time-dependent painting potentials. The implementation of this setup may open new directions at the interface with condensed matter, few-body Efimov physics or the exploration of critical, non-equilibrium phenomena.

arXiv:2505.14155•Scientific Reports•May 14, 2026•5 citations

Spatial shaping for generating arbitrary optical dipole traps for ultracold degenerate gases

Jeffrey G. Lee, W. T. Hill

We present two spatial-shaping approaches - phase and amplitude - for creating two-dimensional optical dipole potentials for ultracold neutral atoms. When combined with an attractive or repulsive Gaussian sheet formed by an astigmatically focused beam, atoms are trapped in three dimensions resulting in planar confinement with an arbitrary network of potentials - a free-space atom chip. The first approach utilizes an adaptation of the generalized phase-contrast technique to convert a phase structure embedded in a beam after traversing a phase mask, to an identical intensity profile in the image plane. Phase masks, and a requisite phase-contrast filter, can be chemically etched into optical material (e.g., fused silica) or implemented with spatial light modulators; etching provides the highest quality while spatial light modulators enable prototyping and realtime structure modification. This approach was demonstrated on an ensemble of thermal atoms. Amplitude shaping is possible when the potential structure is made as an opaque mask in the path of a dipole trap beam, followed by imaging the shadow onto the plane of the atoms. While much more lossy, this very simple and inexpensive approach can produce dipole potentials suitable for containing degenerate gases. High-quality amplitude masks can be produced with standard photolithography techniques. Amplitude shaping was demonstrated on a Bose-Einstein condensate.

arXiv:1406.4084•Review of Scientific Instruments•Oct 1, 2014•19 citations

Manipulation of ultracold atomic gases with spatially and temporally controlled optical potentials

Thomas George Easton

This thesis focusses on the use of a Digital Micromirror Device (DMD) to produce spatially and temporally varying optical potentials for the manipulation of ultracold atoms. I discuss the apparatus used to generate ultracold atomic samples as well as that used to manipulate them, including a comparison of the various light sources used with the DMD. Here I demonstrate the advantages in image quality that can be achieved using a superluminescent diode. I also report on work which uses the capability to produce spatially and temporally controlled potentials to engineer a synthetic dimension of harmonic oscillator sites, forming a lattice consisting of 10s of lattice sites on which Bloch Oscillations are demonstrated. Finally I describe simulations which demonstrate the clustering behaviour of quantised vortices in a Bose-Einstein condensate when arranged in linear structures, as could be done by the method of phase imprinting using a DMD. I demonstrate the use of a cluster detection algorithm which is novel in the field of quantised vortices, and show that in many cases, vortex clusters can be modelled by methods similar to those used for single vortices.

•Jul 11, 2024•0 citations

Generations of dark hollow beams and their applications in laser cooling of atoms and all optical-type Bose-Einstein condensation

Yin Jian-Ping, Gao Wei-Jian, Wang Hai-Feng +2 more

We report on a new experimental result to generate dark hollow beams by using a geometric optical method. We propose two new methods to produce focused and localized hollow laser beams by using π-phase plates. Using Monte Carlo simulations, we have studied the Sisyphus cooling of alkali atoms in pyramidal hollow beam gravito-optical traps. We discuss some potential applications of the dark hollow beams in atom optics and the preparation of an all optically-cooled and optically-trapped atomic Bose-Einstein condensation (BEC). Our research shows that an ultracold atomic sample with a temperature of ~2µK can be obtained in the pyramidal hollow beam dipole trap and an all optical-type BEC may be realized in a far blue-detuned, hollow beam trap.

Chinese Physics•Oct 23, 2002•49 citations
Ultracold quantum gases are usually prepared in conservative traps for quantum simulation experiments. The atomic density inhomogeneity, together with the consequent position-dependent energy and time scales of cold atoms in traditional harmonic traps, makes it difficult to manipulate and detect the sample at a higher level. These problems are partially solved by optical box traps made of blue-detuned hollow beams. However, generating a high-quality hollow beam with high light efficiency for the box trap is challenging. Here, we present a scheme that combines the fixed optics, including axicons and prisms, to pre-shape a Gaussian beam into a hollow beam with a digital micromirror device (DMD) to improve the quality of the hollow beam further, providing a nearly ideal optical potential of various shapes for preparing highly homogeneous cold atoms. The highest power-law exponent of potential walls can reach a value over 100, and the light efficiency from a Gaussian to a hollow beam is also improved compared to direct optical shaping by a mask or a DMD. Combined with a one-dimensional optical lattice, a nearly ideal two-dimensional uniform quantum gas with different geometrical boundaries can be prepared for exploring quantum many-body physics to an unprecedented level.
A homogeneous one-dimensional optical lattice is demonstrated by using a high-precision beam shaper based on a digital micromirror device (DMD) with an imaging system containing a pinhole low-pass filter (LPF). This system is capable of producing a high-quality flattop beam profile to form a standing-wave optical lattice with a 50×50 μm2 flattop region. The periodic potential generated by the optical lattice confines ultracold atoms in Bose-Einstein condensate experiments. We conducted beam shaping tests at several wavelengths by implementing various coherent and incoherent light sources in the visible and infrared wavelength ranges. Experiments produced flattop and other well-controlled beam profiles with 0.2% to 0.26% root-mean-square (RMS) error after applying a digital LPF and nearly flat phase. Several concerns for the system design are presented. First, the energy requirement was determined by power conversion analysis and DMD diffraction efficiency simulation. In addition, a LabVIEW program was written to accelerate the speed of the iterative process for beam profile refinement. Finally, various camera calibrations improved the measurement accuracy. We achieved a 1.25% RMS error flattop beam with diameter of 70.4 μm at the atoms' plane. Other beam profile measurements in different diagnostic planes demonstrated a good intensity uniformity of the optical lattice.
The implementation of spatial light modulators (SLMs) in quantum gas experiments has allowed the realization of ever more complex trapping geometries. As ultracold atoms may be sensitive to perturbations of the trapping potential at the 1% level, the high contrast ratios of digital micromirror devices are proving advantageous for use in optical trapping. Our laboratory pursues configurable traps based on the direct (nearly diffraction limited) imaging of a digital micromirror device (DMD). We achieve highly flexible potentials using commercially available microscope objectives external to our vacuum chamber that directly project the DMD to the atom plane, producing optical traps over an area of 130 μm × 200 μm, with a resolution of 630(10) nm full width at half maximum (FWHM) at 532 nm illumination. We combine these potentials with a horizontally propagating TEM00 or TEM01 Hermite-Gaussian optical sheet that provides vertical confinement. With the dynamic control enabled by the maximum full-frame rate of 20 KHz and on-board storage of <13,000 frames of the DMD, we study the transport of atoms and superfluid dynamics in configurable trapping geometries. Using the fast frame rate of the DMD we also produce intermediate grey levels that complement half-toning techniques for producing optimized grayscale patterns.
Ultracold atomic gases with uniform density can be created by flat-bottom optical traps. These gases provide an ideal platform to study many-body physics in a system that allows for simple connections with theoretical models and emulation of numerous effects from a wide range of fields of physics. In Earth-bound laboratories the trap sizes, number of species and states, as well as the range of physical effects are largely restricted by the adopted levitation technique. Homogeneous ultracold gases in microgravity simulators and space however offer an interesting perspective which is actively being pursued. To effectively make use of a gravity-compensated laboratory, realizing box potentials with large spatial extent enables access to previously inaccessible length scales and reduce finite-size and boundary effects. We present an approach based on two identical orthogonally aligned acousto-optic deflector setups to generate large time-averaged optical potentials with trapping volumes up to three orders of magnitude larger than conventional setups. These potentials follow power-law scalings with exponents of up to 152. We characterize the system and validate its performance through simulations of the mean-field ground state of a quantum gas, including dynamical excitations arising from the realistic time-dependent painting potentials. The implementation of this setup may open new directions at the interface with condensed matter, few-body Efimov physics or the exploration of critical, non-equilibrium phenomena.
We present two spatial-shaping approaches - phase and amplitude - for creating two-dimensional optical dipole potentials for ultracold neutral atoms. When combined with an attractive or repulsive Gaussian sheet formed by an astigmatically focused beam, atoms are trapped in three dimensions resulting in planar confinement with an arbitrary network of potentials - a free-space atom chip. The first approach utilizes an adaptation of the generalized phase-contrast technique to convert a phase structure embedded in a beam after traversing a phase mask, to an identical intensity profile in the image plane. Phase masks, and a requisite phase-contrast filter, can be chemically etched into optical material (e.g., fused silica) or implemented with spatial light modulators; etching provides the highest quality while spatial light modulators enable prototyping and realtime structure modification. This approach was demonstrated on an ensemble of thermal atoms. Amplitude shaping is possible when the potential structure is made as an opaque mask in the path of a dipole trap beam, followed by imaging the shadow onto the plane of the atoms. While much more lossy, this very simple and inexpensive approach can produce dipole potentials suitable for containing degenerate gases. High-quality amplitude masks can be produced with standard photolithography techniques. Amplitude shaping was demonstrated on a Bose-Einstein condensate.
This thesis focusses on the use of a Digital Micromirror Device (DMD) to produce spatially and temporally varying optical potentials for the manipulation of ultracold atoms. I discuss the apparatus used to generate ultracold atomic samples as well as that used to manipulate them, including a comparison of the various light sources used with the DMD. Here I demonstrate the advantages in image quality that can be achieved using a superluminescent diode. I also report on work which uses the capability to produce spatially and temporally controlled potentials to engineer a synthetic dimension of harmonic oscillator sites, forming a lattice consisting of 10s of lattice sites on which Bloch Oscillations are demonstrated. Finally I describe simulations which demonstrate the clustering behaviour of quantised vortices in a Bose-Einstein condensate when arranged in linear structures, as could be done by the method of phase imprinting using a DMD. I demonstrate the use of a cluster detection algorithm which is novel in the field of quantised vortices, and show that in many cases, vortex clusters can be modelled by methods similar to those used for single vortices.
We report on a new experimental result to generate dark hollow beams by using a geometric optical method. We propose two new methods to produce focused and localized hollow laser beams by using π-phase plates. Using Monte Carlo simulations, we have studied the Sisyphus cooling of alkali atoms in pyramidal hollow beam gravito-optical traps. We discuss some potential applications of the dark hollow beams in atom optics and the preparation of an all optically-cooled and optically-trapped atomic Bose-Einstein condensation (BEC). Our research shows that an ultracold atomic sample with a temperature of ~2µK can be obtained in the pyramidal hollow beam dipole trap and an all optical-type BEC may be realized in a far blue-detuned, hollow beam trap.