Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2404.15989 · PRX Quantum

Creating Entangled Logical Qubits in the Heavy-Hex Lattice with Topological Codes

Bence Hetényi, James R. Wootton

Published Dec 3, 2024• 48 citations
arXivHTMLPDF

Abstract

Designs for quantum error correction depend strongly on the connectivity of the qubits. For solid-state qubits, the most straightforward approach is to have connectivity constrained to a planar graph. Practical considerations may also further restrict the connectivity, resulting in a relatively sparse graph such as the heavy-hexagonal (“heavy-hex”) architecture of current IBM Quantum devices. In such cases, it is hard to use all qubits to their full potential. Instead, in order to emulate the denser connectivity required to implement well-known quantum error-correcting codes, many qubits remain effectively unused. In this work, we show how this bug can be turned into a feature. By using the unused qubits of one code to execute another, two codes can be implemented on top of each other, allowing easy application of fault-tolerant entangling gates and measurements. We demonstrate this by realizing a surface code and a Bacon-Shor code on a 133-qubit IBM Quantum device. Using transversal controlled- X () gates and lattice surgery, we demonstrate entanglement between these logical qubits with code distance up to d = 4 and five rounds of stabilizer-measurement cycles. The nonplanar coupling between the qubits allows us to simultaneously measure the logical X X , Y Y , and Z Z observables. With this, we verify the violation of Bell’s inequality for both the d = 2 case with postselection featuring a fidelity of 94% and the d = 3 instance using only quantum error correction. Published by the American Physical Society 2024

DOI
10.1103/prxquantum.5.040334

Related papers

Towards logical entanglement creation in trivalent planar architectures

Lukas Bödeker, Luis Colmenarez, Sergey Blinov +3 more

Low-overhead quantum error-correction schemes are essential for enabling quantum computation on registers containing multiple logical qubits. For planar architectures with limited nearest-neighbor qubit connectivity, the surface code has emerged as the leading paradigm. Recent theoretical and experimental work has shown that a physical-qubit connectivity of degree three is sufficient to implement fault-tolerant quantum error correction. In this work, we study lattice surgery in the context of such trivalent architectures and introduce scalable circuit constructions to implement it. Compared with the four-valent measurement scheme, the trivalent lattice-surgery protocol reduces the required resources by $\mathcal{O}(d)$ qubits out of a total qubit count of $\mathcal{O}(d^2)$ and by $\mathcal{O}(d)$ two-qubit gates out of a total two-qubit gate count of $\mathcal{O}(d^3)$. We benchmark the logical fidelity of both lattice-surgery schemes in terms of experimentally realistic simulations targeting an implementation with a fluxonium qubit based architecture and find a potential improvement of up to $\approx25\%$ for distance-three. These results open a way for scalable planar trivalent qubit architectures to host a surface-code-based logical quantum processor.

quant-pharXiv:2607.15044•Jul 17, 2026•0 citations

Lattice surgery realized on two distance-three repetition codes with superconducting qubits

Ilya S. Besedin, Michael Kerschbaum, Jonathan Knoll +12 more

Abstract Quantum error correction is needed for quantum computers to be capable of executing algorithms using hundreds of logical qubits in a fault-tolerant manner. Recent experiments have progressed towards this by demonstrating sufficiently low error rates for state preservation of a single logical qubit. However, quantum computation algorithms also require that these logical qubits can be entangled and that gate operations can be performed on them. Lattice surgery is a technique that offers a practical approach for implementing such gates, particularly in planar quantum processor layouts. Here we demonstrate lattice surgery between two distance-three repetition-code qubits by splitting a single distance-three surface-code qubit. Using a quantum circuit that is fault-tolerant for bit-flip errors, we achieve an improvement in the value of the decoded Z Z logical two-qubit observable compared with a similar non-encoded circuit. We therefore demonstrate the functional building blocks needed for lattice-surgery operations on larger-distance codes based on superconducting circuits.

arXiv:2501.04612•Nature Physics•Jan 30, 2026•41 citations

A superconducting surface-code processor with lattice-surgery logical operations

Yanzhe Wang, Fanhao Shen, Haipeng Xie +31 more

Fault-tolerant logical operations are fundamental for scalable quantum computation. Here, we report the experimental realization of lattice-surgery operations between a pair of distance-three surface-code logical qubits on a planar superconducting processor. During repeated syndrome extraction cycles, the logical qubits exhibit per-cycle error rates of $0.0365(2)$ and $0.0282(1)$, respectively, after leakage events are rejected. By leveraging joint initialization and lattice splitting, we deterministically prepare a logical Bell state, confirming genuine bipartite entanglement via the error-corrected logical state fidelity. We further execute a two-qubit Deutsch-Jozsa algorithm at the logical level to demonstrate algorithmic utility in a fault-tolerant framework. Finally, to achieve universal control, we implement magic-state injection and gate teleportation to realize continuous non-Clifford rotations about the logical $X$ axis. For the logical $R_{X}(π/4)$ gate, we achieve a logical gate fidelity of $0.943_{-9}^{+10}$ conditioned on the absence of detected errors. These results establish lattice surgery as a practical and versatile paradigm for logical computation in near-term surface-code architectures, representing a critical milestone toward scalable fault-tolerant quantum advantage in superconducting circuits.

quant-pharXiv:2606.06598•Jun 8, 2026•21 citations

Comparative study of quantum error correction strategies for the heavy-hexagonal lattice

César Benito, Esperanza López, Borja Peropadre +1 more

Topological quantum error correction is a milestone in the scaling roadmap of quantum computers, which targets circuits with trillions of gates that would allow running quantum algorithms for real-world problems. The square-lattice surface code has become the workhorse to address this challenge, as it poses milder requirements on current devices both in terms of required error rates and small local connectivities. In some platforms, however, the connectivities are kept even lower in order to minimise gate errors at the hardware level, which limits the error correcting codes that can be directly implemented on them. In this work, we make a comparative study of possible strategies to overcome this limitation for the heavy-hexagonal lattice, the architecture of current IBM superconducting quantum computers. We explore two complementary strategies: the search for an efficient embedding of the surface code into the heavy-hexagonal lattice, as well as the use of codes whose connectivity requirements are naturally tailored to this architecture, such as subsystem-type and Floquet codes. Using noise models of increased complexity, we assess the performance of these strategies for IBM devices in terms of their error thresholds and qubit footprints. An optimized SWAP-based embedding of the surface code is found to be the most promising strategy towards a near-term demonstration of quantum error correction advantage.

arXiv:2402.02185•Quantum•Feb 6, 2025•26 citations

Three Sheets, One Architecture: Inter-Sheet Logical Gates for K=4 Quantum Error Correction

Raghu Kulkarni

Abstract We present a CSS quantum error correcting code on the Face-Centered Cubic (FCC) lattice that combines surface-code-compatible K=4 connectivity with native inter-sheet logical gates between co-located CSS code blocks — a combination not previously achieved among well-studied codes. The construction has two parts. First, restricting the [[3L³, 2L³+2, 3]] FCC lattice code to a single triad sheet yields the sheet code with parameters [[L³, 2L, L]] at even L (or [[L³, L, L]] as a planar variant), uniform weight-4 stabilizers, and K=4 per-qubit connectivity. Three triad sheets share the FCC lattice geometry and can be deployed in one of three ways — monolithic 2D for small L, a three-layer stacked architecture for scalable deployment, or native 3D hardware — in each case encoding 6L logical qubits at distance L. Second, we introduce a fault-tolerant lattice surgery protocol that uses local FCC triangle measurements to implement joint Pauli measurements between logical qubits in different sheets. Each surgery operation adds O(L) two-qubit gates to the O(L³) per-round syndrome extraction cost. Under circuit-level depolarizing noise with MWPM decoding, the static memory threshold is p_th ≈ 0.63% and the surgery threshold is p_th ≈ 0.5%, both above the operating range of current quantum processors. Compared to surface code lattice surgery (also K=4, lattice surgery confined within a single patch), the sheet code provides 2L logicals per sheet at the same distance and connectivity; compared to bivariate bicycle codes (which target inter-block gates between physically separated modules at K=6 with long-range couplers), the sheet code achieves inter-sheet gates at K=4 with only short-range couplings between co-located sheets.

•Jun 19, 2026•0 citations

Entangled logical qubits on a superconducting quantum processor

Robin Harper, Xanda C. Kolesnikow, Campbell K. McLauchlan +3 more

We demonstrate high-fidelity logical qubit operations using \texttt{ibm\_phoenix}, a square-lattice array of 120 coupled superconducting qubits that are capable of fast reset. Using strategies to exclude underperforming components together with noise informed decoding, we routinely produce surface codes at distance-3 and distance-5 with logical error per round below 1\%. We demonstrate entanglement between two logical qubits, where logical Bell-state fidelities above 93\% are observed for entanglement created via lattice surgery. With three logical qubits and lattice surgery, we perform logical teleportation of a range of states and gates, observing fidelities in the range 78\% - 93\%. Using reset to reduce qubit leakage, we show that repeated rounds of stabilizer measurements continue to exhibit improvements in a stability experiment up to $\sim 2\cdot 10^{-7}$ over 170 measurement rounds.

quant-pharXiv:2610.32347•Oct 26, 2026•0 citations
Designs for quantum error correction depend strongly on the connectivity of the qubits. For solid-state qubits, the most straightforward approach is to have connectivity constrained to a planar graph. Practical considerations may also further restrict the connectivity, resulting in a relatively sparse graph such as the heavy-hexagonal (“heavy-hex”) architecture of current IBM Quantum devices. In such cases, it is hard to use all qubits to their full potential. Instead, in order to emulate the denser connectivity required to implement well-known quantum error-correcting codes, many qubits remain effectively unused. In this work, we show how this bug can be turned into a feature. By using the unused qubits of one code to execute another, two codes can be implemented on top of each other, allowing easy application of fault-tolerant entangling gates and measurements. We demonstrate this by realizing a surface code and a Bacon-Shor code on a 133-qubit IBM Quantum device. Using transversal controlled- X () gates and lattice surgery, we demonstrate entanglement between these logical qubits with code distance up to d = 4 and five rounds of stabilizer-measurement cycles. The nonplanar coupling between the qubits allows us to simultaneously measure the logical X X , Y Y , and Z Z observables. With this, we verify the violation of Bell’s inequality for both the d = 2 case with postselection featuring a fidelity of 94% and the d = 3 instance using only quantum error correction. Published by the American Physical Society 2024
Low-overhead quantum error-correction schemes are essential for enabling quantum computation on registers containing multiple logical qubits. For planar architectures with limited nearest-neighbor qubit connectivity, the surface code has emerged as the leading paradigm. Recent theoretical and experimental work has shown that a physical-qubit connectivity of degree three is sufficient to implement fault-tolerant quantum error correction. In this work, we study lattice surgery in the context of such trivalent architectures and introduce scalable circuit constructions to implement it. Compared with the four-valent measurement scheme, the trivalent lattice-surgery protocol reduces the required resources by O(d)\mathcal{O}(d)O(d) qubits out of a total qubit count of O(d2)\mathcal{O}(d^2)O(d2) and by O(d)\mathcal{O}(d)O(d) two-qubit gates out of a total two-qubit gate count of O(d3)\mathcal{O}(d^3)O(d3). We benchmark the logical fidelity of both lattice-surgery schemes in terms of experimentally realistic simulations targeting an implementation with a fluxonium qubit based architecture and find a potential improvement of up to ≈25%\approx25\%≈25% for distance-three. These results open a way for scalable planar trivalent qubit architectures to host a surface-code-based logical quantum processor.
Abstract Quantum error correction is needed for quantum computers to be capable of executing algorithms using hundreds of logical qubits in a fault-tolerant manner. Recent experiments have progressed towards this by demonstrating sufficiently low error rates for state preservation of a single logical qubit. However, quantum computation algorithms also require that these logical qubits can be entangled and that gate operations can be performed on them. Lattice surgery is a technique that offers a practical approach for implementing such gates, particularly in planar quantum processor layouts. Here we demonstrate lattice surgery between two distance-three repetition-code qubits by splitting a single distance-three surface-code qubit. Using a quantum circuit that is fault-tolerant for bit-flip errors, we achieve an improvement in the value of the decoded Z Z logical two-qubit observable compared with a similar non-encoded circuit. We therefore demonstrate the functional building blocks needed for lattice-surgery operations on larger-distance codes based on superconducting circuits.
Fault-tolerant logical operations are fundamental for scalable quantum computation. Here, we report the experimental realization of lattice-surgery operations between a pair of distance-three surface-code logical qubits on a planar superconducting processor. During repeated syndrome extraction cycles, the logical qubits exhibit per-cycle error rates of 0.0365(2)0.0365(2)0.0365(2) and 0.0282(1)0.0282(1)0.0282(1), respectively, after leakage events are rejected. By leveraging joint initialization and lattice splitting, we deterministically prepare a logical Bell state, confirming genuine bipartite entanglement via the error-corrected logical state fidelity. We further execute a two-qubit Deutsch-Jozsa algorithm at the logical level to demonstrate algorithmic utility in a fault-tolerant framework. Finally, to achieve universal control, we implement magic-state injection and gate teleportation to realize continuous non-Clifford rotations about the logical XXX axis. For the logical RX(π/4)R_{X}(π/4)RX​(π/4) gate, we achieve a logical gate fidelity of 0.943−9+100.943_{-9}^{+10}0.943−9+10​ conditioned on the absence of detected errors. These results establish lattice surgery as a practical and versatile paradigm for logical computation in near-term surface-code architectures, representing a critical milestone toward scalable fault-tolerant quantum advantage in superconducting circuits.
Topological quantum error correction is a milestone in the scaling roadmap of quantum computers, which targets circuits with trillions of gates that would allow running quantum algorithms for real-world problems. The square-lattice surface code has become the workhorse to address this challenge, as it poses milder requirements on current devices both in terms of required error rates and small local connectivities. In some platforms, however, the connectivities are kept even lower in order to minimise gate errors at the hardware level, which limits the error correcting codes that can be directly implemented on them. In this work, we make a comparative study of possible strategies to overcome this limitation for the heavy-hexagonal lattice, the architecture of current IBM superconducting quantum computers. We explore two complementary strategies: the search for an efficient embedding of the surface code into the heavy-hexagonal lattice, as well as the use of codes whose connectivity requirements are naturally tailored to this architecture, such as subsystem-type and Floquet codes. Using noise models of increased complexity, we assess the performance of these strategies for IBM devices in terms of their error thresholds and qubit footprints. An optimized SWAP-based embedding of the surface code is found to be the most promising strategy towards a near-term demonstration of quantum error correction advantage.
Abstract We present a CSS quantum error correcting code on the Face-Centered Cubic (FCC) lattice that combines surface-code-compatible K=4 connectivity with native inter-sheet logical gates between co-located CSS code blocks — a combination not previously achieved among well-studied codes. The construction has two parts. First, restricting the [[3L³, 2L³+2, 3]] FCC lattice code to a single triad sheet yields the sheet code with parameters [[L³, 2L, L]] at even L (or [[L³, L, L]] as a planar variant), uniform weight-4 stabilizers, and K=4 per-qubit connectivity. Three triad sheets share the FCC lattice geometry and can be deployed in one of three ways — monolithic 2D for small L, a three-layer stacked architecture for scalable deployment, or native 3D hardware — in each case encoding 6L logical qubits at distance L. Second, we introduce a fault-tolerant lattice surgery protocol that uses local FCC triangle measurements to implement joint Pauli measurements between logical qubits in different sheets. Each surgery operation adds O(L) two-qubit gates to the O(L³) per-round syndrome extraction cost. Under circuit-level depolarizing noise with MWPM decoding, the static memory threshold is p_th ≈ 0.63% and the surgery threshold is p_th ≈ 0.5%, both above the operating range of current quantum processors. Compared to surface code lattice surgery (also K=4, lattice surgery confined within a single patch), the sheet code provides 2L logicals per sheet at the same distance and connectivity; compared to bivariate bicycle codes (which target inter-block gates between physically separated modules at K=6 with long-range couplers), the sheet code achieves inter-sheet gates at K=4 with only short-range couplings between co-located sheets.
We demonstrate high-fidelity logical qubit operations using \texttt{ibm\_phoenix}, a square-lattice array of 120 coupled superconducting qubits that are capable of fast reset. Using strategies to exclude underperforming components together with noise informed decoding, we routinely produce surface codes at distance-3 and distance-5 with logical error per round below 1\%. We demonstrate entanglement between two logical qubits, where logical Bell-state fidelities above 93\% are observed for entanglement created via lattice surgery. With three logical qubits and lattice surgery, we perform logical teleportation of a range of states and gates, observing fidelities in the range 78\% - 93\%. Using reset to reduce qubit leakage, we show that repeated rounds of stabilizer measurements continue to exhibit improvements in a stability experiment up to ∼2⋅10−7\sim 2\cdot 10^{-7}∼2⋅10−7 over 170 measurement rounds.