Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2404.04372 · Optica

Strong interactions between integrated microresonators and alkali atomic vapors: towards single-atom, single-photon operation

Roy Zektzer, Xiyuan Lu, Khoi Tuan Hoang, Rahul Shrestha, Sharoon Austin, Feng Lei Zhou, Ashish Chanana, Glenn E. Holland, Daron Westly, Paul D. Lett, Alexey Vyacheslavovich Gorshkov, Kartik A. Srinivasan

Published Sep 3, 2024• 20 citations
arXivHTMLPDF

Abstract

Cavity quantum electrodynamics (cQED), the interaction of a two-level system with a high quality factor ( Q ) cavity, is a foundational building block in different architectures for quantum computation, communication, and metrology. The strong interaction between the atom and the cavity enables single-photon operation, which is required for quantum gates and sources. Cold atoms, quantum dots, and color centers in crystals are among the systems that have shown single-photon operations, but they require significant physical infrastructure. Atomic vapors, on the other hand, require limited experimental infrastructure and are hence much easier to deploy outside a laboratory, but they consist of an ensemble of moving atoms that results in short interaction times involving multiple atoms, which can hamper quantum operations. A solution to this issue can be found in nanophotonic cavities, where the optical mode is confined to a small volume and light-matter interaction is enhanced, so that fast single-atom, single-photon operations are enabled. In this work, we study the interaction of an atomically clad microring resonator (ACMRR) with different-sized ensembles of Rb atoms. We demonstrate strong coupling between an ensemble of ≈50 atoms interacting with a high quality factor ( Q =4.3×10 5 ) ACMRR, yielding a many-atom cooperativity C =(5.5±0.3). We continue to observe signatures of atom-photon interaction for a few (<3) atoms, for which we observe saturation at the level of a few intracavity photons. Further development of our platform, which includes integrated thermo-optic heaters to enable cavity tuning and stabilization, should enable the observation of interactions between single photons and single atoms.

DOI
10.1364/optica.525689

Related papers

Strong interactions between integrated microresonators and alkali atomic vapors: towards single-photon-level operation

Roy Zektzer, Xiyuan Lu, Khoi Tuan Hoang +8 more

We demonstrate strong coupling between an ensemble of ≈50 atoms interacting with a high-Q (>4x105) atomic-cladded microring-resonator, yielding a many-atom cooperativity C≈3.6. We further discuss photonic crystal ring defect resonator development for high single-atom-level cooperativity.

Conference on Lasers and Electro-Optics•Jan 1, 2024•0 citations

Strong interactions between integrated photonics and atomic vapors: towards single-photon-level operation

Roy Zektzer, Xiyuan Lu, Khoi Tuan Hoang +7 more

We present recent results aiming to construct single photon sources, detectors and gates using the integration of hot Rubidium atoms and microring resonators (MRRs). We demonstrate strong coupling between an ensemble of ≈53 atoms interacting with a high-Q (>4x10^5) cavity mode, with a many-atom coupling strength g/2pi≈1 GHz and cooperativity C≈3.6 achieved. A peak single-atom cooperativity C0≈0.4 is inferred; to achieve higher cooperativity, we have developed defect mode photonic crystal ring resonators with a 10x reduction in mode volume compared to the MRR while maintaining Q>10^5. Finally, we will discuss theoretical results that support single photon operations using these devices.

Quantum Computing, Communication, and Simulation•Mar 13, 2024•0 citations

Collective strong coupling of thermal atoms to integrated microring resonators

Xiaoyu Cheng, Benyamin Shnirman, Alexandra Kopf +5 more

Strong coupling between atomic ensembles and high-quality optical cavities enables collective and nonlinear phenomena that are central to cavity quantum electrodynamics (cQED). Many experiments have been performed on this topic, with most of them focusing on cold atoms. Here, we experimentally demonstrate collective strong coupling between thermal rubidium vapor and high-quality silicon nitride microring resonators (MRRs) on an integrated photonic chip. We observe cavity-mode splitting, with a measured collective coupling strength of g N / 2 π ≈ 1 G Hz and a collective cooperativity of C N ≈ 2 at 110 ∘ C , indicating coherent energy exchange between the atomic ensemble and the cavity mode despite rapid decoherence in the thermal vapor system. We infer an average of 20 atoms effectively participating in the collective interaction, yielding a single-atom cooperativity of C 0 = 0.1 and approaching the single-atom strong-coupling regime. Our results establish the integrated thermal vapor MRR platform as a robust, compact, and scalable system for studying collective and nonlinear phenomena in cQED.

arXiv:2604.24509•Physical Review Research•Sep 19, 2026•0 citations

Cavity QED based on room temperature atoms interacting with a photonic crystal cavity: a feasibility study

Hadiseh Alaeian, Ralf Ritter, Muamera Basic +2 more

Abstract The paradigm of cavity QED is a two-level emitter interacting with a high-quality factor single-mode optical resonator. The hybridization of the emitter and photon wave functions mandates large vacuum Rabi frequencies and long coherence times; features that so far have been successfully realized with trapped cold atoms and ions, and localized solid-state quantum emitters such as superconducting circuits, quantum dots, and color centers Reiserer and Rempe (Rev Modern Phys 87:1379, 2015), Faraon et al. (Phys Rev 81:033838, 2010). Thermal atoms, on the other hand, provide us with a dense emitter ensemble and in comparison to the cold systems are more compatible with integration, hence enabling large-scale quantum systems. However, their thermal motion and large transit-time broadening is a major bottleneck that has to be circumvented. A promising remedy could benefit from the highly controllable and tunable electromagnetic fields of a nano-photonic cavity with strong local electric-field enhancements. Utilizing this feature, here we investigate the interaction between fast moving thermal atoms and a nano-beam photonic crystal cavity (PCC) with large quality factor and small mode volume. Through fully quantum mechanical calculations, including Casimir–Polder potential (i.e. the effect of the surface on radiation properties of an atom), we show, when designed properly, the achievable coupling between the flying atom and the cavity photon would be strong enough to lead to quantum interference effects in spite of short interaction times. In addition, the time-resolved detection of different trajectories can be used to identify single and multiple atom counts. This probabilistic approach will find applications in cavity QED studies in dense atomic media and paves the way towards realizing large-scale, room-temperature macroscopic quantum systems aimed at out of the lab quantum devices.

arXiv:1907.04680•Applied Physics B•Jan 16, 2020•24 citations

Interacting single atoms with nanophotonics for chip-integrated quantum networks

Daniel J. Alton

Underlying matter and light are their building blocks of tiny atoms and photons. The ability to control and utilize matter-light interactions down to the elementary single atom and photon level at the nano-scale opens up exciting studies at the frontiers of science with applications in medicine, energy, and information technology. Of these, an intriguing front is the development of quantum networks where N >> 1 single-atom nodes are coherently linked by single photons, forming a collective quantum entity potentially capable of performing quantum computations and simulations. Here, a promising approach is to use optical cavities within the setting of cavity quantum electrodynamics (QED). However, since its first realization in 1992 by Kimble et al., current proof-of-principle experiments have involved just one or two conventional cavities. To move beyond to N >> 1 nodes, in this thesis we investigate a platform born from the marriage of cavity QED and nanophotonics, where single atoms at ~100 nm near the surfaces of lithographically fabricated dielectric photonic devices can strongly interact with single photons, on a chip. Particularly, we experimentally investigate three main types of devices: microtoroidal optical cavities, optical nanofibers, and nanophotonic crystal based structures. With a microtoroidal cavity, we realized a robust and efficient photon router where single photons are extracted from an incident coherent state of light and redirected to a separate output with high efficiency. We achieved strong single atom-photon coupling with atoms located ~100 nm near the surface of a microtoroid, which revealed important aspects in the atom dynamics and QED of these systems including atom-surface interaction effects. We present a method to achieve state-insensitive atom trapping near optical nanofibers, critical in nanophotonic systems where electromagnetic fields are tightly confined. We developed a system that fabricates high quality nanofibers with high controllability, with which we experimentally demonstrate a state-insensitive atom trap. We present initial investigations on nanophotonic crystal based structures as a platform for strong atom-photon interactions. The experimental advances and theoretical investigations carried out in this thesis provide a framework for and open the door to strong single atom-photon interactions using nanophotonics for chip-integrated quantum networks.

The Musical Quarterly•Jan 1, 2013•1 citation

Strong Coupling between Small Atomic Ensembles and an Open Fiber Cavity

G Manuel Fernández, Carmena Jose

In this work I present the experimental realization of a versatile platform for the interplay between light and matter at the single-quanta level. In particular, I demonstrate the high cooperativity of small ensembles of rubidium atoms strongly coupled to a state-of-the-art, open fiber-based microcavity, emphasizing the capabilities of the system as an efficient source and storage device for single photons. The first part of this thesis focusses on the construction and characterization of the microresonator, which is composed of two dielectric mirrors machined on the end-facets of optical glass fibers. Through the implementation of an in-house facility, a large number of fiber-based mirrors are manufactured and precisely characterized. I present a theoretical model that explains, for the first time, the asymmetry in their reflective line shape and that has important implications for the optimal alignment of fiber-based cavities. In the following chapter, I introduce the main experimental apparatus, which contains a miniaturized fiber cavity -- with small mode volume and a linewidth of k≈2(pi)x25 MHz -- that is actively stabilized and integrated in a compact assembly. The monolithic structure features several high-numerical aperture (NA) lenses that provide the necessary tools for the trapping, manipulation and high-resolution imaging of atoms inside the resonator. Neutral rubidium atoms are delivered by an optical conveyor belt from the cooling region into the cavity mode, where their presence is monitored by probing the cavity field. This allows us to perform real-time optical feedback in the transport scheme and to observe the characteristic vacuum Rabi splitting for individual atoms in a non-destructive manner. Due to the small mode volume of the microcavity, coupling strengths up to g=2(pi)x100 MHz are observed for single atoms, corresponding to light-matter interaction in the strong coupling regime. The system's cooperativity is collectively enhanced more than five times when placing a small atomic ensemble inside the resonator. Such a fast interaction rate and the high transmission of the input cavity mirror provide a rapid, non-destructive readout of the internal hyperfine state of a coupled atom, yielding fidelities of 99.8% in 5 ms with less than 1% population transfer and negligible atom losses. The last part of the thesis is dedicated to the study of the influence of the cavity on the emission properties of an atom. I show how, despite the small solid angle covered by the cavity mode, the resonator alters the radiation pattern of an externally pumped single atom and increases its emission rate by a factor of 15 due to the process known as cavity back-action. More than 90% of the emitted photons are collected by the single cavity-mode -- as a result of the strong Purcell enhancement -- and subsequently channeled out by one of the fiber mirrors. A characterization of the photon statistics of the cavity output shows a clear antibunching dip, confirming that the emission corresponds to a single quantum emitter and that our system can be used as a readily fiber-coupled, efficient single-photon source.

•Apr 12, 2018•3 citations
Cavity quantum electrodynamics (cQED), the interaction of a two-level system with a high quality factor ( Q ) cavity, is a foundational building block in different architectures for quantum computation, communication, and metrology. The strong interaction between the atom and the cavity enables single-photon operation, which is required for quantum gates and sources. Cold atoms, quantum dots, and color centers in crystals are among the systems that have shown single-photon operations, but they require significant physical infrastructure. Atomic vapors, on the other hand, require limited experimental infrastructure and are hence much easier to deploy outside a laboratory, but they consist of an ensemble of moving atoms that results in short interaction times involving multiple atoms, which can hamper quantum operations. A solution to this issue can be found in nanophotonic cavities, where the optical mode is confined to a small volume and light-matter interaction is enhanced, so that fast single-atom, single-photon operations are enabled. In this work, we study the interaction of an atomically clad microring resonator (ACMRR) with different-sized ensembles of Rb atoms. We demonstrate strong coupling between an ensemble of ≈50 atoms interacting with a high quality factor ( Q =4.3×10 5 ) ACMRR, yielding a many-atom cooperativity C =(5.5±0.3). We continue to observe signatures of atom-photon interaction for a few (<3) atoms, for which we observe saturation at the level of a few intracavity photons. Further development of our platform, which includes integrated thermo-optic heaters to enable cavity tuning and stabilization, should enable the observation of interactions between single photons and single atoms.
We present recent results aiming to construct single photon sources, detectors and gates using the integration of hot Rubidium atoms and microring resonators (MRRs). We demonstrate strong coupling between an ensemble of ≈53 atoms interacting with a high-Q (>4x10^5) cavity mode, with a many-atom coupling strength g/2pi≈1 GHz and cooperativity C≈3.6 achieved. A peak single-atom cooperativity C0≈0.4 is inferred; to achieve higher cooperativity, we have developed defect mode photonic crystal ring resonators with a 10x reduction in mode volume compared to the MRR while maintaining Q>10^5. Finally, we will discuss theoretical results that support single photon operations using these devices.
Strong coupling between atomic ensembles and high-quality optical cavities enables collective and nonlinear phenomena that are central to cavity quantum electrodynamics (cQED). Many experiments have been performed on this topic, with most of them focusing on cold atoms. Here, we experimentally demonstrate collective strong coupling between thermal rubidium vapor and high-quality silicon nitride microring resonators (MRRs) on an integrated photonic chip. We observe cavity-mode splitting, with a measured collective coupling strength of g N / 2 π ≈ 1 G Hz and a collective cooperativity of C N ≈ 2 at 110 ∘ C , indicating coherent energy exchange between the atomic ensemble and the cavity mode despite rapid decoherence in the thermal vapor system. We infer an average of 20 atoms effectively participating in the collective interaction, yielding a single-atom cooperativity of C 0 = 0.1 and approaching the single-atom strong-coupling regime. Our results establish the integrated thermal vapor MRR platform as a robust, compact, and scalable system for studying collective and nonlinear phenomena in cQED.
Abstract The paradigm of cavity QED is a two-level emitter interacting with a high-quality factor single-mode optical resonator. The hybridization of the emitter and photon wave functions mandates large vacuum Rabi frequencies and long coherence times; features that so far have been successfully realized with trapped cold atoms and ions, and localized solid-state quantum emitters such as superconducting circuits, quantum dots, and color centers Reiserer and Rempe (Rev Modern Phys 87:1379, 2015), Faraon et al. (Phys Rev 81:033838, 2010). Thermal atoms, on the other hand, provide us with a dense emitter ensemble and in comparison to the cold systems are more compatible with integration, hence enabling large-scale quantum systems. However, their thermal motion and large transit-time broadening is a major bottleneck that has to be circumvented. A promising remedy could benefit from the highly controllable and tunable electromagnetic fields of a nano-photonic cavity with strong local electric-field enhancements. Utilizing this feature, here we investigate the interaction between fast moving thermal atoms and a nano-beam photonic crystal cavity (PCC) with large quality factor and small mode volume. Through fully quantum mechanical calculations, including Casimir–Polder potential (i.e. the effect of the surface on radiation properties of an atom), we show, when designed properly, the achievable coupling between the flying atom and the cavity photon would be strong enough to lead to quantum interference effects in spite of short interaction times. In addition, the time-resolved detection of different trajectories can be used to identify single and multiple atom counts. This probabilistic approach will find applications in cavity QED studies in dense atomic media and paves the way towards realizing large-scale, room-temperature macroscopic quantum systems aimed at out of the lab quantum devices.
Underlying matter and light are their building blocks of tiny atoms and photons. The ability to control and utilize matter-light interactions down to the elementary single atom and photon level at the nano-scale opens up exciting studies at the frontiers of science with applications in medicine, energy, and information technology. Of these, an intriguing front is the development of quantum networks where N >> 1 single-atom nodes are coherently linked by single photons, forming a collective quantum entity potentially capable of performing quantum computations and simulations. Here, a promising approach is to use optical cavities within the setting of cavity quantum electrodynamics (QED). However, since its first realization in 1992 by Kimble et al., current proof-of-principle experiments have involved just one or two conventional cavities. To move beyond to N >> 1 nodes, in this thesis we investigate a platform born from the marriage of cavity QED and nanophotonics, where single atoms at ~100 nm near the surfaces of lithographically fabricated dielectric photonic devices can strongly interact with single photons, on a chip. Particularly, we experimentally investigate three main types of devices: microtoroidal optical cavities, optical nanofibers, and nanophotonic crystal based structures. With a microtoroidal cavity, we realized a robust and efficient photon router where single photons are extracted from an incident coherent state of light and redirected to a separate output with high efficiency. We achieved strong single atom-photon coupling with atoms located ~100 nm near the surface of a microtoroid, which revealed important aspects in the atom dynamics and QED of these systems including atom-surface interaction effects. We present a method to achieve state-insensitive atom trapping near optical nanofibers, critical in nanophotonic systems where electromagnetic fields are tightly confined. We developed a system that fabricates high quality nanofibers with high controllability, with which we experimentally demonstrate a state-insensitive atom trap. We present initial investigations on nanophotonic crystal based structures as a platform for strong atom-photon interactions. The experimental advances and theoretical investigations carried out in this thesis provide a framework for and open the door to strong single atom-photon interactions using nanophotonics for chip-integrated quantum networks.
In this work I present the experimental realization of a versatile platform for the interplay between light and matter at the single-quanta level. In particular, I demonstrate the high cooperativity of small ensembles of rubidium atoms strongly coupled to a state-of-the-art, open fiber-based microcavity, emphasizing the capabilities of the system as an efficient source and storage device for single photons. The first part of this thesis focusses on the construction and characterization of the microresonator, which is composed of two dielectric mirrors machined on the end-facets of optical glass fibers. Through the implementation of an in-house facility, a large number of fiber-based mirrors are manufactured and precisely characterized. I present a theoretical model that explains, for the first time, the asymmetry in their reflective line shape and that has important implications for the optimal alignment of fiber-based cavities. In the following chapter, I introduce the main experimental apparatus, which contains a miniaturized fiber cavity -- with small mode volume and a linewidth of k≈2(pi)x25 MHz -- that is actively stabilized and integrated in a compact assembly. The monolithic structure features several high-numerical aperture (NA) lenses that provide the necessary tools for the trapping, manipulation and high-resolution imaging of atoms inside the resonator. Neutral rubidium atoms are delivered by an optical conveyor belt from the cooling region into the cavity mode, where their presence is monitored by probing the cavity field. This allows us to perform real-time optical feedback in the transport scheme and to observe the characteristic vacuum Rabi splitting for individual atoms in a non-destructive manner. Due to the small mode volume of the microcavity, coupling strengths up to g=2(pi)x100 MHz are observed for single atoms, corresponding to light-matter interaction in the strong coupling regime. The system's cooperativity is collectively enhanced more than five times when placing a small atomic ensemble inside the resonator. Such a fast interaction rate and the high transmission of the input cavity mirror provide a rapid, non-destructive readout of the internal hyperfine state of a coupled atom, yielding fidelities of 99.8% in 5 ms with less than 1% population transfer and negligible atom losses. The last part of the thesis is dedicated to the study of the influence of the cavity on the emission properties of an atom. I show how, despite the small solid angle covered by the cavity mode, the resonator alters the radiation pattern of an externally pumped single atom and increases its emission rate by a factor of 15 due to the process known as cavity back-action. More than 90% of the emitted photons are collected by the single cavity-mode -- as a result of the strong Purcell enhancement -- and subsequently channeled out by one of the fiber mirrors. A characterization of the photon statistics of the cavity output shows a clear antibunching dip, confirming that the emission corresponds to a single quantum emitter and that our system can be used as a readily fiber-coupled, efficient single-photon source.