Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2403.18150 · Nature Communications

High kinetic inductance cavity arrays for compact band engineering and topology-based disorder meters

Vincent Jouanny, Simone Frasca, Vera Jo Weibel, Léo Peyruchat, Marco Scigliuzzo, Fabian Oppliger, Franco De Palma, Davide Sbroggiò, Guillaume Beaulieu, Oded Zilberberg, Pasquale Scarlino

Published Apr 16, 2025• 24 citations
arXivHTMLPDF

Abstract

Abstract Superconducting microwave metamaterials offer enormous potential for quantum optics and information science, enabling the development of advanced quantum technologies for sensing and amplification. In the context of circuit quantum electrodynamics, such metamaterials can be implemented as coupled cavity arrays (CCAs). In the continuous effort to miniaturize quantum devices for increasing scalability, minimizing the footprint of CCAs while preserving low disorder becomes paramount. In this work, we present a compact CCA architecture using superconducting NbN thin films manifesting high kinetic inductance. The latter enables high-impedance CCA (~1.5 kΩ), while reducing the resonator footprint. We demonstrate its versatility and scalability by engineering one-dimensional CCAs with up to 100 resonators and with structures that exhibit multiple bandgaps. Additionally, we quantitatively investigate disorder in the CCAs using symmetry-protected topological SSH edge modes, from which we extract a resonator frequency scattering of $$0.2{2}_{-0.03}^{+0.04}\%$$ 0.2 2 − 0.03 + 0.04 % . Our platform opens up exciting prospects for analog quantum simulations of many-body physics with ultrastrongly coupled emitters.

DOI
10.1038/s41467-025-58595-8

Related papers

Hybridized-Mode Parametric Amplifier in Kinetic-Inductance Circuits

Danial Davoudi, Abdul Mohamed, Shabir Barzanjeh

Parametric amplification is essential for quantum measurement, enabling the amplification of weak microwave signals with minimal added noise. While Josephson-junction-based amplifiers have become standard in superconducting quantum circuits, their magnetic sensitivity, limited saturation power, and sub-kelvin operating requirements motivate the development of alternative nonlinear platforms. Here we demonstrate a two-mode kinetic-inductance parametric amplifier based on a pair of capacitively coupled Kerr-nonlinear resonators fabricated from NbTiN and NbN thin films. The distributed Kerr nonlinearity of these materials enables nondegenerate four-wave-mixing amplification with gains approaching 40 dB, gain-bandwidth products up to 6.9 MHz, and 1-dB compression powers two to three orders of magnitude higher than those of state-of-the-art Josephson amplifiers. A coupled-mode theoretical model accurately captures the pump-induced modification of the hybridized modes and quantitatively reproduces the observed signal and idler responses. The NbN device exhibits a significantly larger Kerr coefficient and superior gain-bandwidth performance, highlighting the advantages of high-kinetic-inductance materials. Our results establish coupled kinetic-inductance resonators as a robust platform for broadband, high-power, and magnetically resilient quantum-limited amplification, offering a scalable route for advanced readout in superconducting qubits, spin ensembles, quantum dots, and other microwave-quantum technologies.

quant-pharXiv:2512.03362•Dec 4, 2025•2 citations

NbN films with high kinetic inductance for high-quality compact superconducting resonators

Simone Frasca, Ivo Arabadzhiev, Sebastien Yves Bros de Puechredon +7 more

Niobium nitride ($\mathrm{Nb}\mathrm{N}$) is a particularly promising material for quantum technology applications, as it shows the degree of reproducibility necessary for large-scale superconducting circuits. We demonstrate that resonators based on $\mathrm{Nb}\mathrm{N}$ thin films present a one-photon internal quality factor above ${10}^{5}$ maintaining a high impedance (larger than $2\mathrm{k}\mathrm{\ensuremath{\Omega}}$), with a footprint of approximately $50\ifmmode\times\else\texttimes\fi{}100\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}{\mathrm{m}}^{2}$ and a Kerr nonlinearity of few tenths of a hertz. These quality factors, mostly limited by losses induced by the coupling to two-level systems, have been maintained for kinetic inductances ranging from tenths to hundreds of picoHenry per square. We also demonstrate minimal variations in the performance of the resonators during multiple cooldowns over more than nine months. Our work proves the versatility of niobium nitride high-kinetic-inductance resonators, opening perspectives towards the fabrication of compact, high-impedance, and high-quality multimode circuits, with sizable interactions.

arXiv:2302.13930•Physical Review Applied•Oct 9, 2023•47 citations

High-impedance superconducting resonators and on-chip filters for circuit quantum electrodynamics with semiconductor quantum dots

X. Zhang, Zhiyong Zhu, N. Phuan Ong +1 more

Spin-photon coupling presents an enticing opportunity for the long-range coupling of spin qubits. The spin-photon coupling rate, ${g}_{s}$, is proportional to the charge-photon coupling rate, ${g}_{c}$. To move deeper into the strong-coupling regime, ${g}_{c}$ can be enhanced by fabricating high-impedance cavities using high-kinetic-inductance films. Here, we report dc transport and microwave response investigations of niobium nitride ($\mathrm{Nb}\mathrm{N}$) films of different thicknesses. The kinetic inductance increases rapidly as the film thickness is reduced below 50 nm and for 15-nm $\mathrm{Nb}\mathrm{N}$ films we measure a sheet kinetic inductance ${L}_{k,S}=41.2\phantom{\rule{0.2em}{0ex}}\text{pH}/◻$. As an application of the high-kinetic-inductance films, we fabricate compact $LC$ filters that are commonly used to reduce microwave leakage in circuit quantum electrodynamics (cQED) devices. These filters feature up to 60 dB of attenuation near typical cavity resonance frequencies of ${f}_{c}=8$ GHz.

arXiv:2306.16499•Physical Review Applied•Jan 11, 2024•9 citations

Power-Law Suppression of Superfluid Stiffness in High-Kinetic-Inductance NbN Films

Meenakshi Sharma, Hrishikesh Borah, Sandeep Singh +8 more

Disorder is a powerful route to high kinetic inductance in superconducting ultrathin films, enabling compact high-impedance quantum circuits. This functionality, however, comes at the cost of reduced phase rigidity and potentially anomalous electrodynamics. Here, we use NbN microwave resonators with thicknesses down to 2.8 nm and sheet kinetic inductance up to 300 pH per square to probe how this trade-off reshapes the superconducting response. In the thinnest films, transport shows signatures of a Berezinskii-Kosterlitz-Thouless transition, while the microwave response reveals a pronounced low-temperature power-law suppression of the superfluid stiffness, inconsistent with Mattis-Bardeen theory. With increasing thickness, this anomalous regime is progressively suppressed, marking a continuous crossover toward conventional, gap-dominated electrodynamics. Cross-sectional transmission electron microscopy reveals a nanocrystalline twin-domain structure, pointing to oriented microstructural disorder as a crucial factor in the observed response. Overall, the crossover is governed by the ratio of superfluid stiffness to pairing energy, Theta(0)/Tc, identifying this ratio as a parameter governing the boundary between phase-fluctuation-dominated and gap-dominated superconducting electrodynamics in disordered nanofilms.

arXiv:2607.20096•Jul 22, 2026•0 citations

Engineering high-Q superconducting tantalum microwave coplanar waveguide resonators for compact coherent quantum circuit

Shima Poorgholam-Khanjari, Valentino Seferai, Paniz Foshat +5 more

Abstract Tantalum (Ta) has recently received considerable attention in manufacturing robust superconducting quantum circuits. Ta offers low microwave loss, high kinetic inductance compared to aluminium (Al) and niobium (Nb), and good compatibility with complementary metal-oxide-semiconductor (CMOS) technology, which is essential for quantum computing applications. Here we demonstrate the fabrication engineering of thickness-dependent high-quality-factor (high- $$\:{Q}_{i}$$ ) Ta superconducting microwave coplanar waveguide resonators. All films are deposited on high-resistivity silicon substrates at room temperature without additional substrate heating. Before Ta deposition, a niobium (Nb) seed layer is used to promote a body-centred cubic lattice ( $$\:\alpha\:$$ -Ta) formation. We further engineer the kinetic inductance ( $$\:{L}_{K}$$ ) of the resonators by varying Ta film thicknesses. High $$\:{L}_{K}$$ is a key advantage for applications because it facilitates the realisation of high-impedance, compact quantum circuits with enhanced coupling to qubits. The maximum internal quality factor $$\:{Q}_{i}$$ of $$\:\sim\:$$ 3.6 × 10 6 in the high power regime and $$\:{Q}_{i}$$ of $$\:\sim\:$$ 4.5 × 10 5 in the single-photon regime is achieved for 100 nm Ta which represents an improvement over previous room-temperature deposited Ta resonators on silicon substrates in the single photon regime, while the highest kinetic inductance of 0.6 pH/sq is obtained for the thinnest film, which is 40 nm. This combination of high $$\:{Q}_{i}$$ and high $$\:{L}_{K}$$ highlights the potential of Ta microwave circuits for high-fidelity operation of compact quantum circuits.

arXiv:2412.16099•Scientific Reports•Jul 25, 2025•20 citations

Design and Modeling of Double-Fold Superconducting High-Q Coplanar Waveguide Resonators for Quantum Applications

Jagmohan Singh, Hongxiang Shen, Nobuyuki Yoshikawa +2 more

In this paper, we present a novel design of a compact, double-fold half-wave superconducting coplanar waveguide resonator, specifically optimized for quantum readout. The geometry offers advantages in terms of scalability and allows for a more compact integration of qubits per unit area. The superconducting resonators are designed to operate within a fundamental frequency range of 1.9 GHz$-$1.95 GHz, utilizing both gap and finger coupling schemes. The devices are fabricated using thin aluminum films deposited on high-resistivity sapphire substrates. The proposed resonators exhibit quality factor (Q$_{L}$) of 2.9 ×$ 10^{5}$and 1.58 ×$10^{3}$for gap coupled and finger coupled, respectively, during experimental measurements. The simulated Q$_{L}$of single-folded meander line resonators are found to be 4.65 ×$10^{5}$and 258.42, for gap coupled and finger coupled, respectively, for comparison purpose at similar operating frequency. A comprehensive analysis of the microwave transmission spectra was conducted at cryogenic temperatures near 10 mK, across very high input drive powers ($-$30 dBm to$-$10 dBm). Experimental results show a good agreement with simulations and the equivalent lumped circuit model. Notably, the proposed design reduces the physical footprint of the resonator devices up to 28.2$\%$compared to conventional single-fold meandered structures. The resonators demonstrate strong potential for integrating qubits with readout and control buses in quantum information processing which require a Q$_{L}$between$10^{4}$$-$$10^{5}$. They also being well-suited for cryogenic detector applications that utilize microwave kinetic inductance detector (MKID) arrays in frequency multiplexing for different coupling schemes.

IEEE Transactions on Applied Superconductivity•Sep 1, 2025•3 citations
Abstract Superconducting microwave metamaterials offer enormous potential for quantum optics and information science, enabling the development of advanced quantum technologies for sensing and amplification. In the context of circuit quantum electrodynamics, such metamaterials can be implemented as coupled cavity arrays (CCAs). In the continuous effort to miniaturize quantum devices for increasing scalability, minimizing the footprint of CCAs while preserving low disorder becomes paramount. In this work, we present a compact CCA architecture using superconducting NbN thin films manifesting high kinetic inductance. The latter enables high-impedance CCA (~1.5 kΩ), while reducing the resonator footprint. We demonstrate its versatility and scalability by engineering one-dimensional CCAs with up to 100 resonators and with structures that exhibit multiple bandgaps. Additionally, we quantitatively investigate disorder in the CCAs using symmetry-protected topological SSH edge modes, from which we extract a resonator frequency scattering of 0.22−0.03+0.04%0.2{2}_{-0.03}^{+0.04}\%0.22−0.03+0.04​% 0.2 2 − 0.03 + 0.04 % . Our platform opens up exciting prospects for analog quantum simulations of many-body physics with ultrastrongly coupled emitters.
Parametric amplification is essential for quantum measurement, enabling the amplification of weak microwave signals with minimal added noise. While Josephson-junction-based amplifiers have become standard in superconducting quantum circuits, their magnetic sensitivity, limited saturation power, and sub-kelvin operating requirements motivate the development of alternative nonlinear platforms. Here we demonstrate a two-mode kinetic-inductance parametric amplifier based on a pair of capacitively coupled Kerr-nonlinear resonators fabricated from NbTiN and NbN thin films. The distributed Kerr nonlinearity of these materials enables nondegenerate four-wave-mixing amplification with gains approaching 40 dB, gain-bandwidth products up to 6.9 MHz, and 1-dB compression powers two to three orders of magnitude higher than those of state-of-the-art Josephson amplifiers. A coupled-mode theoretical model accurately captures the pump-induced modification of the hybridized modes and quantitatively reproduces the observed signal and idler responses. The NbN device exhibits a significantly larger Kerr coefficient and superior gain-bandwidth performance, highlighting the advantages of high-kinetic-inductance materials. Our results establish coupled kinetic-inductance resonators as a robust platform for broadband, high-power, and magnetically resilient quantum-limited amplification, offering a scalable route for advanced readout in superconducting qubits, spin ensembles, quantum dots, and other microwave-quantum technologies.
Niobium nitride (NbN\mathrm{Nb}\mathrm{N}NbN) is a particularly promising material for quantum technology applications, as it shows the degree of reproducibility necessary for large-scale superconducting circuits. We demonstrate that resonators based on NbN\mathrm{Nb}\mathrm{N}NbN thin films present a one-photon internal quality factor above 105{10}^{5}105 maintaining a high impedance (larger than $2\mathrm{k}\mathrm{\ensuremath{\Omega}}$), with a footprint of approximately $50\ifmmode\times\else\texttimes\fi{}100\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}{\mathrm{m}}^{2}$ and a Kerr nonlinearity of few tenths of a hertz. These quality factors, mostly limited by losses induced by the coupling to two-level systems, have been maintained for kinetic inductances ranging from tenths to hundreds of picoHenry per square. We also demonstrate minimal variations in the performance of the resonators during multiple cooldowns over more than nine months. Our work proves the versatility of niobium nitride high-kinetic-inductance resonators, opening perspectives towards the fabrication of compact, high-impedance, and high-quality multimode circuits, with sizable interactions.
Spin-photon coupling presents an enticing opportunity for the long-range coupling of spin qubits. The spin-photon coupling rate, gs{g}_{s}gs​, is proportional to the charge-photon coupling rate, gc{g}_{c}gc​. To move deeper into the strong-coupling regime, gc{g}_{c}gc​ can be enhanced by fabricating high-impedance cavities using high-kinetic-inductance films. Here, we report dc transport and microwave response investigations of niobium nitride (NbN\mathrm{Nb}\mathrm{N}NbN) films of different thicknesses. The kinetic inductance increases rapidly as the film thickness is reduced below 50 nm and for 15-nm NbN\mathrm{Nb}\mathrm{N}NbN films we measure a sheet kinetic inductance Lk,S=41.2pH/◻{L}_{k,S}=41.2\phantom{\rule{0.2em}{0ex}}\text{pH}/◻Lk,S​=41.2pH/◻. As an application of the high-kinetic-inductance films, we fabricate compact LCLCLC filters that are commonly used to reduce microwave leakage in circuit quantum electrodynamics (cQED) devices. These filters feature up to 60 dB of attenuation near typical cavity resonance frequencies of fc=8{f}_{c}=8fc​=8 GHz.
Disorder is a powerful route to high kinetic inductance in superconducting ultrathin films, enabling compact high-impedance quantum circuits. This functionality, however, comes at the cost of reduced phase rigidity and potentially anomalous electrodynamics. Here, we use NbN microwave resonators with thicknesses down to 2.8 nm and sheet kinetic inductance up to 300 pH per square to probe how this trade-off reshapes the superconducting response. In the thinnest films, transport shows signatures of a Berezinskii-Kosterlitz-Thouless transition, while the microwave response reveals a pronounced low-temperature power-law suppression of the superfluid stiffness, inconsistent with Mattis-Bardeen theory. With increasing thickness, this anomalous regime is progressively suppressed, marking a continuous crossover toward conventional, gap-dominated electrodynamics. Cross-sectional transmission electron microscopy reveals a nanocrystalline twin-domain structure, pointing to oriented microstructural disorder as a crucial factor in the observed response. Overall, the crossover is governed by the ratio of superfluid stiffness to pairing energy, Theta(0)/Tc, identifying this ratio as a parameter governing the boundary between phase-fluctuation-dominated and gap-dominated superconducting electrodynamics in disordered nanofilms.
Abstract Tantalum (Ta) has recently received considerable attention in manufacturing robust superconducting quantum circuits. Ta offers low microwave loss, high kinetic inductance compared to aluminium (Al) and niobium (Nb), and good compatibility with complementary metal-oxide-semiconductor (CMOS) technology, which is essential for quantum computing applications. Here we demonstrate the fabrication engineering of thickness-dependent high-quality-factor (high-  Qi\:{Q}_{i}Qi​ ) Ta superconducting microwave coplanar waveguide resonators. All films are deposited on high-resistivity silicon substrates at room temperature without additional substrate heating. Before Ta deposition, a niobium (Nb) seed layer is used to promote a body-centred cubic lattice (  α \:\alpha\:α -Ta) formation. We further engineer the kinetic inductance (  LK\:{L}_{K}LK​ ) of the resonators by varying Ta film thicknesses. High  LK\:{L}_{K}LK​ is a key advantage for applications because it facilitates the realisation of high-impedance, compact quantum circuits with enhanced coupling to qubits. The maximum internal quality factor  Qi\:{Q}_{i}Qi​ of  ∼ \:\sim\:∼ 3.6 × 10 6 in the high power regime and  Qi\:{Q}_{i}Qi​ of  ∼ \:\sim\:∼ 4.5 × 10 5 in the single-photon regime is achieved for 100 nm Ta which represents an improvement over previous room-temperature deposited Ta resonators on silicon substrates in the single photon regime, while the highest kinetic inductance of 0.6 pH/sq is obtained for the thinnest film, which is 40 nm. This combination of high  Qi\:{Q}_{i}Qi​ and high  LK\:{L}_{K}LK​ highlights the potential of Ta microwave circuits for high-fidelity operation of compact quantum circuits.
In this paper, we present a novel design of a compact, double-fold half-wave superconducting coplanar waveguide resonator, specifically optimized for quantum readout. The geometry offers advantages in terms of scalability and allows for a more compact integration of qubits per unit area. The superconducting resonators are designed to operate within a fundamental frequency range of 1.9 GHz$-1.95GHz,utilizingbothgapandfingercouplingschemes.Thedevicesarefabricatedusingthinaluminumfilmsdepositedonhigh−resistivitysapphiresubstrates.Theproposedresonatorsexhibitqualityfactor(Q1.95 GHz, utilizing both gap and finger coupling schemes. The devices are fabricated using thin aluminum films deposited on high-resistivity sapphire substrates. The proposed resonators exhibit quality factor (Q1.95GHz,utilizingbothgapandfingercouplingschemes.Thedevicesarefabricatedusingthinaluminumfilmsdepositedonhigh−resistivitysapphiresubstrates.Theproposedresonatorsexhibitqualityfactor(Q_{L})of2.9×) of 2.9 ×)of2.9× 10^{5}$and 1.58 ×10310^{3}103for gap coupled and finger coupled, respectively, during experimental measurements. The simulated QL_{L}L​of single-folded meander line resonators are found to be 4.65 ×10510^{5}105and 258.42, for gap coupled and finger coupled, respectively, for comparison purpose at similar operating frequency. A comprehensive analysis of the microwave transmission spectra was conducted at cryogenic temperatures near 10 mK, across very high input drive powers ($-30dBmto30 dBm to30dBmto-10dBm).Experimentalresultsshowagoodagreementwithsimulationsandtheequivalentlumpedcircuitmodel.Notably,theproposeddesignreducesthephysicalfootprintoftheresonatordevicesupto28.210 dBm). Experimental results show a good agreement with simulations and the equivalent lumped circuit model. Notably, the proposed design reduces the physical footprint of the resonator devices up to 28.210dBm).Experimentalresultsshowagoodagreementwithsimulationsandtheequivalentlumpedcircuitmodel.Notably,theproposeddesignreducesthephysicalfootprintoftheresonatordevicesupto28.2\%comparedtoconventionalsingle−foldmeanderedstructures.TheresonatorsdemonstratestrongpotentialforintegratingqubitswithreadoutandcontrolbusesinquantuminformationprocessingwhichrequireaQcompared to conventional single-fold meandered structures. The resonators demonstrate strong potential for integrating qubits with readout and control buses in quantum information processing which require a Qcomparedtoconventionalsingle−foldmeanderedstructures.TheresonatorsdemonstratestrongpotentialforintegratingqubitswithreadoutandcontrolbusesinquantuminformationprocessingwhichrequireaQ_{L}$between10410^{4}104−-−10510^{5}105. They also being well-suited for cryogenic detector applications that utilize microwave kinetic inductance detector (MKID) arrays in frequency multiplexing for different coupling schemes.