Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2403.13035

Accelerated quantum search using partial oracles and Grover's algorithm

Bolton, Fintan M.

Published Mar 19, 2024• 3 citations
arXivHTMLPDF

Abstract

Grover's algorithm, orginally conceived as a means of searching an unordered database, can also be used to extract solutions from the result sets generated by quantum computations. The Grover algorithm exploits the concept of an oracle function, which abstracts the process of matching a search item (returning 1 for a match and 0 otherwise), where searching for 1 target item in a search space of size $N$ scales as $\mathcal{O}(\sqrt{N})$ oracle queries. In this article, we explore the idea of associating a separate oracle with each bit of the matching condition, obtaining multiple partial oracle functions which can be tested independently. Exploring this idea leads to a multi-stage hybrid search algorithm, whose performance can fall within a wide range, anywhere between $\mathcal{O}(\sqrt{N})$ (same as Grover) or $\mathcal{O}(\log(N))$. The algorithm is validated against the simplest kind of search scenario, where the incoming index bits are scrambled using a permutation operation.

DOI
10.48550/arxiv.2403.13035

Related papers

Optimization of partial search

V. E. Korepin

A quantum Grover search algorithm can find a target item in a database faster than any classical algorithm. One can trade accuracy for speed and find a part of the database (a block) containing the target item even faster; this is partial search. A partial search algorithm was recently suggested by Grover and Radhakrishnan. Here we optimize it. Efficiency of the search algorithm is measured by the number of queries to the oracle. The author suggests a new version of the Grover–Radhakrishnan algorithm which uses a minimal number of such queries. The algorithm can run on the same hardware that is used for the usual Grover algorithm.

arXiv:quant-ph/0503238•Journal of Physics A Mathematical and General•Oct 19, 2005•30 citations

HIERARCHICAL QUANTUM SEARCH

V. E. Korepin, YING XU

Database search has wide applications and is used as a subroutine in many important algorithms. In this paper, we will consider a database with a single target item. Quantum algorithm (Grover) locates the target item faster than any classical algorithm. In addition to a full (Grover) search, it frequently occurs that one is looking for a group of items (a block) containing the target item, rather than the target item itself. This problem is known as partial search. As a generalization of the full search, partial search is of particular importance in practice. Partial search trades accuracy for speed, i.e., it works faster than a full search. There exists different versions of partial search. We will study the optimized version of the algorithm discovered by Grover and Radhakrishnan and call it GRK. GRK can be applied successively (in a sequence). First, the database is partitioned into blocks and GRK is applied to find the target block. This target block is then partitioned into subblocks and GRK is used again to find the target subblock. This procedure can be repeated if the database is large enough. (This sequence of GRK's is called a hierarchy.) Another possibility is to partition the database into subblocks directly and use GRK to find the target subblock once. In this paper, we will prove that the latter is faster (makes less queries to the Oracle).

International Journal of Modern Physics B•Dec 20, 2007•9 citations

Grover's Search Algorithm for Database Validation

Dr CH Pavan Satish, K. Bhargavi, G.Vanaja +2 more

In my project I would have considered how the old search algorithms that are used when working with large unstructured data set end up taking linear time (O(N)) that in effect is the time that scales with the size of the data. These old ways get gradually sluggish, as everything gets bigger. Then I read about quantum computing, and especially Search Algorithm that was developed by Grover which is capable of quadratic speed-up with a complexity of O(sqrt(N)) of unstructured data. I created a hybrid system which fuses classical and quantum search applied on Flask as the web front end and Qiskit as the quantum one. This will enable me to compare the simple linear algorithm of searching through the list item-by-item with the quantum algorithm of Grover which uses superposition, a marking oracle to identify the desired item, and multiple amplitude amplification diffusion operators. The web page also accepts a student ID, and actually searches both simultaneously and allows me to tweak a depolarizing noise model so as to more closely mimic real quantum hardware. I measured such variables as the number of calls to the oracle, the number of qubits that I require, the quantum run time, and the number of measurements that I receive out of the quantum measurement. As the results indicate, the algorithm developed by Grover reduces the number of operations significantly compared to the classical one, and it must be emphasized that the algorithm remains quite effective even in the case of simulated noise. On the whole, it demonstrates that the classical and quantum components may be an efficient method to deal with the large search in the database.

International Journal of Engineering Research and Science & Technology•Mar 22, 2026•0 citations

QUANTUM SEARCH ALGORITHMS

V. E. Korepin, YING XU

This article reviews recent progress in quantum database search algorithms. The subject is presented in a self-contained and pedagogical way. The problem of searching a large database (a Hilbert space) for a target item is performed by the famous Grover algorithm which locates the target item with high probability and a quadratic speed-up compared with the corresponding classical algorithm. If the database is partitioned into blocks and one is searching for the block containing the target item instead of the target item itself, then the problem is referred to as partial search. Partial search trades accuracy for speed and the most efficient version is the Grover–Radhakrishnan–Korepin (GRK) algorithm. The target block can be further partitioned into sub-blocks so that GRK's can be performed in a sequence called a hierarchy. We study the Grover search and GRK partial search in detail and prove that a GRK hierarchy is less efficient than a direct GRK partial search. Both the Grover search and the GRK partial search can be generalized to the case with several target items (or target blocks for a GRK). The GRK partial search algorithm can also be represented in terms of group theory.

International Journal of Modern Physics B•Dec 20, 2009•7 citations

Grover's Search Algorithm for Database Validation

Datapro Computers Pvt Ltd, Shravani Salapu

In my project I would have considered how the old search algorithms that are used when working with large unstructured data set end up taking linear time (O(N)) that in effect is the time that scales with the size of the data. These old ways get gradually sluggish, as everything gets bigger. Then I read about quantum computing, and especially Search Algorithm that was developed by Grover which is capable of quadratic speed-up with a complexity of O(sqrt(N)) of unstructured data. I created a hybrid system which fuses classical and quantum search applied on Flask as the web front end and Qiskit as the quantum one. This will enable me to compare the simple linear algorithm of searching through the list item-by-item with the quantum algorithm of Grover which uses superposition, a marking oracle to identify the desired item, and multiple amplitude amplification diffusion operators. The web page also accepts a student ID, and actually searches both simultaneously and allows me to tweak a depolarizing noise model so as to more closely mimic real quantum hardware. I measured such variables as the number of calls to the oracle, the number of qubits that I require, the quantum run time, and the number of measurements that I receive out of the quantum measurement. As the results indicate, the algorithm developed by Grover reduces the number of operations significantly compared to the classical one, and it must be emphasized that the algorithm remains quite effective even in the case of simulated noise. On the whole, it demonstrates that the classical and quantum components may be an efficient method to deal with the large search in the database.

•Aug 11, 2026•0 citations

Asymptotic bounds on quantum partial search algorithm and its applications to parallel search

Yan-Bo Jiang, Xiao-Hui Wang, Kun Zhang +1 more

Grover's algorithm provides a quadratic speedup over classical algorithms for searching an unstructured database and is known to be strictly optimal in oracle query complexity, with tight bounds on its success probability. Although the standard Grover search cannot be further accelerated in the full-search setting, a trade-off between accuracy and query complexity gives rise to the partial search problem. The Grover-Radhakrishnan-Korepin (GRK) algorithm is the standard and most extensively studied protocol for this task. In this work, we provide systematic numerical evidence that the GRK operator sequence gives the highest success probability in all examined cases, supporting it as the optimal ansatz among admissible compositions of global and local Grover operators. Guided by this numerically supported GRK ansatz, we derive an asymptotically tight upper bound on the maximal success probability within the GRK family and establish the corresponding lower bound on the minimal expected number of oracle queries. Furthermore, we investigate parallel quantum search within the partial-search framework. While a direct GRK-based parallelization does not outperform established parallel Grover schemes, we demonstrate that a hybrid strategy combining partial and full search protocols yields a strict, though subleading, improvement over the outer parallel Grover scheme. Our results clarify the fundamental limits of quantum partial search and its role in optimizing parallel quantum search algorithms.

quant-pharXiv:2603.01462•Physical Review A•Mar 3, 2026•2 citations
Grover's algorithm, orginally conceived as a means of searching an unordered database, can also be used to extract solutions from the result sets generated by quantum computations. The Grover algorithm exploits the concept of an oracle function, which abstracts the process of matching a search item (returning 1 for a match and 0 otherwise), where searching for 1 target item in a search space of size NNN scales as O(N)\mathcal{O}(\sqrt{N})O(N​) oracle queries. In this article, we explore the idea of associating a separate oracle with each bit of the matching condition, obtaining multiple partial oracle functions which can be tested independently. Exploring this idea leads to a multi-stage hybrid search algorithm, whose performance can fall within a wide range, anywhere between O(N)\mathcal{O}(\sqrt{N})O(N​) (same as Grover) or O(log⁡(N))\mathcal{O}(\log(N))O(log(N)). The algorithm is validated against the simplest kind of search scenario, where the incoming index bits are scrambled using a permutation operation.
A quantum Grover search algorithm can find a target item in a database faster than any classical algorithm. One can trade accuracy for speed and find a part of the database (a block) containing the target item even faster; this is partial search. A partial search algorithm was recently suggested by Grover and Radhakrishnan. Here we optimize it. Efficiency of the search algorithm is measured by the number of queries to the oracle. The author suggests a new version of the Grover–Radhakrishnan algorithm which uses a minimal number of such queries. The algorithm can run on the same hardware that is used for the usual Grover algorithm.
Database search has wide applications and is used as a subroutine in many important algorithms. In this paper, we will consider a database with a single target item. Quantum algorithm (Grover) locates the target item faster than any classical algorithm. In addition to a full (Grover) search, it frequently occurs that one is looking for a group of items (a block) containing the target item, rather than the target item itself. This problem is known as partial search. As a generalization of the full search, partial search is of particular importance in practice. Partial search trades accuracy for speed, i.e., it works faster than a full search. There exists different versions of partial search. We will study the optimized version of the algorithm discovered by Grover and Radhakrishnan and call it GRK. GRK can be applied successively (in a sequence). First, the database is partitioned into blocks and GRK is applied to find the target block. This target block is then partitioned into subblocks and GRK is used again to find the target subblock. This procedure can be repeated if the database is large enough. (This sequence of GRK's is called a hierarchy.) Another possibility is to partition the database into subblocks directly and use GRK to find the target subblock once. In this paper, we will prove that the latter is faster (makes less queries to the Oracle).
In my project I would have considered how the old search algorithms that are used when working with large unstructured data set end up taking linear time (O(N)) that in effect is the time that scales with the size of the data. These old ways get gradually sluggish, as everything gets bigger. Then I read about quantum computing, and especially Search Algorithm that was developed by Grover which is capable of quadratic speed-up with a complexity of O(sqrt(N)) of unstructured data. I created a hybrid system which fuses classical and quantum search applied on Flask as the web front end and Qiskit as the quantum one. This will enable me to compare the simple linear algorithm of searching through the list item-by-item with the quantum algorithm of Grover which uses superposition, a marking oracle to identify the desired item, and multiple amplitude amplification diffusion operators. The web page also accepts a student ID, and actually searches both simultaneously and allows me to tweak a depolarizing noise model so as to more closely mimic real quantum hardware. I measured such variables as the number of calls to the oracle, the number of qubits that I require, the quantum run time, and the number of measurements that I receive out of the quantum measurement. As the results indicate, the algorithm developed by Grover reduces the number of operations significantly compared to the classical one, and it must be emphasized that the algorithm remains quite effective even in the case of simulated noise. On the whole, it demonstrates that the classical and quantum components may be an efficient method to deal with the large search in the database.
This article reviews recent progress in quantum database search algorithms. The subject is presented in a self-contained and pedagogical way. The problem of searching a large database (a Hilbert space) for a target item is performed by the famous Grover algorithm which locates the target item with high probability and a quadratic speed-up compared with the corresponding classical algorithm. If the database is partitioned into blocks and one is searching for the block containing the target item instead of the target item itself, then the problem is referred to as partial search. Partial search trades accuracy for speed and the most efficient version is the Grover–Radhakrishnan–Korepin (GRK) algorithm. The target block can be further partitioned into sub-blocks so that GRK's can be performed in a sequence called a hierarchy. We study the Grover search and GRK partial search in detail and prove that a GRK hierarchy is less efficient than a direct GRK partial search. Both the Grover search and the GRK partial search can be generalized to the case with several target items (or target blocks for a GRK). The GRK partial search algorithm can also be represented in terms of group theory.
In my project I would have considered how the old search algorithms that are used when working with large unstructured data set end up taking linear time (O(N)) that in effect is the time that scales with the size of the data. These old ways get gradually sluggish, as everything gets bigger. Then I read about quantum computing, and especially Search Algorithm that was developed by Grover which is capable of quadratic speed-up with a complexity of O(sqrt(N)) of unstructured data. I created a hybrid system which fuses classical and quantum search applied on Flask as the web front end and Qiskit as the quantum one. This will enable me to compare the simple linear algorithm of searching through the list item-by-item with the quantum algorithm of Grover which uses superposition, a marking oracle to identify the desired item, and multiple amplitude amplification diffusion operators. The web page also accepts a student ID, and actually searches both simultaneously and allows me to tweak a depolarizing noise model so as to more closely mimic real quantum hardware. I measured such variables as the number of calls to the oracle, the number of qubits that I require, the quantum run time, and the number of measurements that I receive out of the quantum measurement. As the results indicate, the algorithm developed by Grover reduces the number of operations significantly compared to the classical one, and it must be emphasized that the algorithm remains quite effective even in the case of simulated noise. On the whole, it demonstrates that the classical and quantum components may be an efficient method to deal with the large search in the database.
Grover's algorithm provides a quadratic speedup over classical algorithms for searching an unstructured database and is known to be strictly optimal in oracle query complexity, with tight bounds on its success probability. Although the standard Grover search cannot be further accelerated in the full-search setting, a trade-off between accuracy and query complexity gives rise to the partial search problem. The Grover-Radhakrishnan-Korepin (GRK) algorithm is the standard and most extensively studied protocol for this task. In this work, we provide systematic numerical evidence that the GRK operator sequence gives the highest success probability in all examined cases, supporting it as the optimal ansatz among admissible compositions of global and local Grover operators. Guided by this numerically supported GRK ansatz, we derive an asymptotically tight upper bound on the maximal success probability within the GRK family and establish the corresponding lower bound on the minimal expected number of oracle queries. Furthermore, we investigate parallel quantum search within the partial-search framework. While a direct GRK-based parallelization does not outperform established parallel Grover schemes, we demonstrate that a hybrid strategy combining partial and full search protocols yields a strict, though subleading, improvement over the outer parallel Grover scheme. Our results clarify the fundamental limits of quantum partial search and its role in optimizing parallel quantum search algorithms.