Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2403.10084 · Physical Review Applied

Sequential-measurement thermometry with quantum many-body probes

Yaoling Yang, Víctor Montenegro, Abolfazl Bayat

Published Aug 27, 2024• 13 citations
arXivHTMLPDF

Abstract

Measuring the temperature of a quantum system is an essential task in almost all aspects of quantum technologies. Theoretically, an optimal strategy for thermometry often requires measuring energy, which demands full accessibility over the entire system as well as a complex entangled measurement basis. In this paper, we take a different approach and show that single-qubit sequential measurements in the computational basis not only allow for precise thermometry of a many-body system, but may also achieve precision beyond the thermometry capacity of the probe at equilibrium, given by the Cram\'er-Rao bound. Thus, using consecutive single-qubit measurements of the probe out of equilibrium is, in most cases, very beneficial, as it achieves lower-temperature uncertainties and avoids demanding energy measurements when compared with probes at thermal equilibrium. To obtain such precision, the time between the two subsequent measurements should be smaller than the thermalization time so that the probe never thermalizes. Therefore, the nonequilibrium dynamics of the system continuously imprint information about temperature in the state of the probe. To demonstrate the generality of our findings, we consider thermometry in both spin chains and the Jaynes-Cummings model.

DOI
10.1103/physrevapplied.22.024069

Related papers

Bridging thermodynamics and metrology in nonequilibrium quantum thermometry

Vasco Cavina, Luca Mancino, Antonella De Pasquale +7 more

Single-qubit thermometry presents the simplest tool to measure the temperature of thermal baths with reduced invasivity. At thermal equilibrium, the temperature uncertainty is linked to the heat capacity of the qubit, however, the best precision is achieved outside the equilibrium condition. Here, we discuss a way to generalize this relation in a nonequilibrium regime, taking into account purely quantum effects such as coherence. We support our findings with an experimental photonic simulation.

arXiv:1806.05098•Physical Review A•Nov 9, 2018•65 citations

Direct temperature readout in nonequilibrium quantum thermometry

Yan Xie, Junjie Liu

Quantum thermometry aims to measure temperature in nanoscale quantum systems, paralleling classical thermometry. However, temperature is not a quantum observable, and most theoretical studies have therefore concentrated on analyzing fundamental precision limits set by the quantum Fisher information through the quantum Cramer-Rao bound. In contrast, whether a direct temperature readout can be achieved in quantum thermometry remains largely unexplored, particularly under the nonequilibrium conditions prevalent in real-world applications. To address this, we develop a direct temperature readout scheme based on a thermodynamic inference strategy. The scheme integrates two conceptual developments: (i) By applying the maximum entropy principle with the thermometer's mean energy as a constraint, we assign a reference temperature to the nonequilibrium thermometer. We demonstrate that this reference temperature outperforms a commonly used effective temperature defined through equilibrium analogy. (ii) We obtain positive semi-definite error functions that lower-bound the deviation of the reference temperature from the true temperature-in analogy to the quantum Cramer-Rao bound for the mean squared error-and vanish upon thermalization with the sample. Combining the reference temperature with these error functions, we introduce a notion of corrected dynamical temperature which furnishes a postprocessed temperature readout under nonequilibrium conditions. This corrected dynamical temperature can be evaluated adaptively without prior knowledge of the actual temperature. We validate the corrected dynamical temperature in a qubit-based thermometer under a range of nonequilibrium initial states, confirming its capability to estimate the true temperature. Importantly, we find that increasing quantum coherence can enhance the precision of this readout.

quant-pharXiv:2601.07198•Physical Review A•Jan 13, 2026•4 citations

Quantum Thermometry

Antonella De Pasquale, Thomas M. Stace

We discuss the application of techniques of quantum estimation theory and quantum metrology to thermometry. The ultimate limit to the precision at which the temperature of a system at thermal equilibrium can be determined is related to the heat capacity when global measurements are performed on the system. We prove that if technical or practical limitations restrict our capabilities to local probing, the highest achievable accuracy to temperature estimation reduces to a sort of mesoscopic version of the heat capacity. Adopting a more practical perspective, we also discuss the relevance of qubit systems as optimal quantum thermometers, in order to retrieve the temperature, or to discriminate between two temperatures, characterizing a thermal reservoir. We show that quantum coherence and entanglement in a probe system can facilitate faster, or more accurate measurements of temperature. While not surprising given this has been demonstrated in phase estimation, temperature is not a conventional quantum observable, therefore these results extend the theory of parameter estimation to measurement of non-Hamiltonian quantities. Finally we point out the advantages brought by a less standard estimation technique based on sequential measurements, when applied to quantum thermometry.

arXiv:1807.05762•Fundamental theories of physics•Jan 1, 2018•41 citations

Collisional Quantum Thermometry

Stella Seah, Stefan Nimmrichter, Daniel Grimmer +3 more

We introduce a general framework for thermometry based on collisional models, where ancillas probe the temperature of the environment through an intermediary system. This allows for the generation of correlated ancillas even if they are initially independent. Using tools from parameter estimation theory, we show through a minimal qubit model that individual ancillas can already outperform the thermal Cramer-Rao bound. In addition, due to the steady-state nature of our model, when measured collectively the ancillas always exhibit superlinear scalings of the Fisher information. This means that even collective measurements on pairs of ancillas will already lead to an advantage. As we find in our qubit model, such a feature may be particularly valuable for weak system-ancilla interactions. Our approach sets forth the notion of metrology in a sequential interactions setting, and may inspire further advances in quantum thermometry.

arXiv:1904.12551•Physical Review Letters•Oct 30, 2019•109 citations

Two-qubit quantum probes for the temperature of an Ohmic environment

Francesca Gebbia, Claudia Benedetti, Fabio Benatti +3 more

We address a particular instance where open quantum systems may be used as quantum probes for an emergent property of a complex system, as the temperature of a thermal bath. The inherent fragility of the quantum probes against decoherence is the key feature making the overall scheme very sensitive. The specific setting examined here is that of quantum thermometry, which aims to exploit decoherence as a resource to estimate the temperature of a sample. We focus on temperature estimation for a bosonic bath at equilibrium in the Ohmic regime (ranging from sub-Ohmic to super-Ohmic), by using pairs of qubits in different initial states and interacting with different environments, consisting either of a single thermal bath or of two independent ones at the same temperature. Our scheme involves pure dephasing of the probes, thus avoiding energy exchange with the sample and the consequent perturbation of temperature itself. We discuss the role of correlations among the probes and the presence of a local versus a global bath. We show that entanglement improves thermometry at short times if the two qubits are embedded in a common bath, whereas if the interaction time is not constrained, then coherence rather than entanglement is the key resource in quantum thermometry.

arXiv:1912.02442•Physical Review A•Mar 17, 2020•66 citations

Thermometry in the quantum regime: recent theoretical progress

Mohammad Mehboudi, Anna Sanpera, Luis Alfonso Correa

Abstract Controlling and measuring the temperature in different devices and platforms that operate in the quantum regime is, without any doubt, essential for any potential application. In this review, we report the most recent theoretical developments dealing with accurate estimation of very low temperatures in quantum systems. Together with the emerging experimental techniques and developments of measurement protocols, the theory of quantum thermometry will decisively impinge and shape the forthcoming quantum technologies. While current quantum thermometric methods differ greatly depending on the experimental platform, the achievable precision, and the temperature range of interest, the theory of quantum thermometry is built under a unifying framework at the crossroads of quantum metrology, open quantum systems, and quantum many-body physics. At a fundamental level, theoretical quantum thermometry is concerned with finding the ultimate bounds and scaling laws that limit the precision of temperature estimation for systems in and out of thermal equilibrium. At a more practical level, it provides tools to formulate precise, yet feasible, thermometric protocols for relevant experimental architectures. Last but not least, the theory of quantum thermometry examines genuine quantum features, like entanglement and coherence, for their exploitation in enhanced-resolution thermometry.

arXiv:1811.03988•Journal of Physics A Mathematical and Theoretical•Jun 10, 2019•201 citations
Measuring the temperature of a quantum system is an essential task in almost all aspects of quantum technologies. Theoretically, an optimal strategy for thermometry often requires measuring energy, which demands full accessibility over the entire system as well as a complex entangled measurement basis. In this paper, we take a different approach and show that single-qubit sequential measurements in the computational basis not only allow for precise thermometry of a many-body system, but may also achieve precision beyond the thermometry capacity of the probe at equilibrium, given by the Cram'er-Rao bound. Thus, using consecutive single-qubit measurements of the probe out of equilibrium is, in most cases, very beneficial, as it achieves lower-temperature uncertainties and avoids demanding energy measurements when compared with probes at thermal equilibrium. To obtain such precision, the time between the two subsequent measurements should be smaller than the thermalization time so that the probe never thermalizes. Therefore, the nonequilibrium dynamics of the system continuously imprint information about temperature in the state of the probe. To demonstrate the generality of our findings, we consider thermometry in both spin chains and the Jaynes-Cummings model.
Quantum thermometry aims to measure temperature in nanoscale quantum systems, paralleling classical thermometry. However, temperature is not a quantum observable, and most theoretical studies have therefore concentrated on analyzing fundamental precision limits set by the quantum Fisher information through the quantum Cramer-Rao bound. In contrast, whether a direct temperature readout can be achieved in quantum thermometry remains largely unexplored, particularly under the nonequilibrium conditions prevalent in real-world applications. To address this, we develop a direct temperature readout scheme based on a thermodynamic inference strategy. The scheme integrates two conceptual developments: (i) By applying the maximum entropy principle with the thermometer's mean energy as a constraint, we assign a reference temperature to the nonequilibrium thermometer. We demonstrate that this reference temperature outperforms a commonly used effective temperature defined through equilibrium analogy. (ii) We obtain positive semi-definite error functions that lower-bound the deviation of the reference temperature from the true temperature-in analogy to the quantum Cramer-Rao bound for the mean squared error-and vanish upon thermalization with the sample. Combining the reference temperature with these error functions, we introduce a notion of corrected dynamical temperature which furnishes a postprocessed temperature readout under nonequilibrium conditions. This corrected dynamical temperature can be evaluated adaptively without prior knowledge of the actual temperature. We validate the corrected dynamical temperature in a qubit-based thermometer under a range of nonequilibrium initial states, confirming its capability to estimate the true temperature. Importantly, we find that increasing quantum coherence can enhance the precision of this readout.
We discuss the application of techniques of quantum estimation theory and quantum metrology to thermometry. The ultimate limit to the precision at which the temperature of a system at thermal equilibrium can be determined is related to the heat capacity when global measurements are performed on the system. We prove that if technical or practical limitations restrict our capabilities to local probing, the highest achievable accuracy to temperature estimation reduces to a sort of mesoscopic version of the heat capacity. Adopting a more practical perspective, we also discuss the relevance of qubit systems as optimal quantum thermometers, in order to retrieve the temperature, or to discriminate between two temperatures, characterizing a thermal reservoir. We show that quantum coherence and entanglement in a probe system can facilitate faster, or more accurate measurements of temperature. While not surprising given this has been demonstrated in phase estimation, temperature is not a conventional quantum observable, therefore these results extend the theory of parameter estimation to measurement of non-Hamiltonian quantities. Finally we point out the advantages brought by a less standard estimation technique based on sequential measurements, when applied to quantum thermometry.
We introduce a general framework for thermometry based on collisional models, where ancillas probe the temperature of the environment through an intermediary system. This allows for the generation of correlated ancillas even if they are initially independent. Using tools from parameter estimation theory, we show through a minimal qubit model that individual ancillas can already outperform the thermal Cramer-Rao bound. In addition, due to the steady-state nature of our model, when measured collectively the ancillas always exhibit superlinear scalings of the Fisher information. This means that even collective measurements on pairs of ancillas will already lead to an advantage. As we find in our qubit model, such a feature may be particularly valuable for weak system-ancilla interactions. Our approach sets forth the notion of metrology in a sequential interactions setting, and may inspire further advances in quantum thermometry.
We address a particular instance where open quantum systems may be used as quantum probes for an emergent property of a complex system, as the temperature of a thermal bath. The inherent fragility of the quantum probes against decoherence is the key feature making the overall scheme very sensitive. The specific setting examined here is that of quantum thermometry, which aims to exploit decoherence as a resource to estimate the temperature of a sample. We focus on temperature estimation for a bosonic bath at equilibrium in the Ohmic regime (ranging from sub-Ohmic to super-Ohmic), by using pairs of qubits in different initial states and interacting with different environments, consisting either of a single thermal bath or of two independent ones at the same temperature. Our scheme involves pure dephasing of the probes, thus avoiding energy exchange with the sample and the consequent perturbation of temperature itself. We discuss the role of correlations among the probes and the presence of a local versus a global bath. We show that entanglement improves thermometry at short times if the two qubits are embedded in a common bath, whereas if the interaction time is not constrained, then coherence rather than entanglement is the key resource in quantum thermometry.
Abstract Controlling and measuring the temperature in different devices and platforms that operate in the quantum regime is, without any doubt, essential for any potential application. In this review, we report the most recent theoretical developments dealing with accurate estimation of very low temperatures in quantum systems. Together with the emerging experimental techniques and developments of measurement protocols, the theory of quantum thermometry will decisively impinge and shape the forthcoming quantum technologies. While current quantum thermometric methods differ greatly depending on the experimental platform, the achievable precision, and the temperature range of interest, the theory of quantum thermometry is built under a unifying framework at the crossroads of quantum metrology, open quantum systems, and quantum many-body physics. At a fundamental level, theoretical quantum thermometry is concerned with finding the ultimate bounds and scaling laws that limit the precision of temperature estimation for systems in and out of thermal equilibrium. At a more practical level, it provides tools to formulate precise, yet feasible, thermometric protocols for relevant experimental architectures. Last but not least, the theory of quantum thermometry examines genuine quantum features, like entanglement and coherence, for their exploitation in enhanced-resolution thermometry.