Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2403.09514 · Physical Review Letters

Quantum Fourier Transform Using Dynamic Circuits

Elisa Bäumer, Vinay Tripathi, Alireza Seif, Daniel A. Lidar, Derek S. Wang

Published Oct 8, 2024• 79 citations
arXivHTMLPDF

Abstract

In dynamic quantum circuits, classical information from midcircuit measurements is fed forward during circuit execution. This emerging capability of quantum computers confers numerous advantages that can enable more efficient and powerful protocols by drastically reducing the resource requirements for certain core algorithmic primitives. In particular, in the case of the n-qubit quantum Fourier transform followed immediately by measurement, the scaling of resource requirements is reduced from O(n^{2}) two-qubit gates in an all-to-all connectivity in the standard unitary formulation to O(n) midcircuit measurements in its dynamic counterpart without any connectivity constraints. Here, we demonstrate the advantage of dynamic quantum circuits for the quantum Fourier transform on IBM's superconducting quantum hardware with certified process fidelities of >50% on up to 16 qubits and >1% on up to 37 qubits, exceeding previous reports across all quantum computing platforms. These results are enabled by our contribution of an efficient method for certifying the process fidelity, as well as of a dynamical decoupling protocol for error suppression during midcircuit measurements and feed forward within a dynamic quantum circuit that we call "feed-forward-compensated dynamical decoupling." Our results demonstrate the advantages of leveraging dynamic circuits in optimizing the compilation of quantum algorithms.

DOI
10.1103/physrevlett.133.150602

Related papers

Learning error suppression strategies for dynamic quantum circuits

Christopher Tong, Liran Shirizly, Edward H. Chen +2 more

Dynamic quantum circuits integrate unitary evolution with mid-circuit measurement and feedforward, enabling conditional operations essential for efficient quantum algorithms and foundational for fault-tolerant quantum computation. However, such operations introduce measurement-induced errors and control constraints that are not addressed by conventional error-suppression techniques. Here, we introduce an empirical learning framework that optimizes dynamical decoupling (DD) sequences for dynamic circuits at the level of circuit subintervals and qubit subregisters. Applying empirically learned DD sequences, we achieve a three-fold reduction in average dynamic circuit error rates as measured via randomized benchmarking. We apply the learned strategies to the dynamic circuit implementation of the quantum Fourier transform with measurement (QFT+M), demonstrating nontrivial process fidelity on connected chains of up to 20 qubits. Applying the resulting enhancement, we perform a high signal-to-noise QFT immediately following the preparation of a 10-qubit entangled state. Our results demonstrate that empirically optimized DD systematically outperforms theoretically derived sequences for dynamic circuits, establishing it as an efficient approach for error suppression in dynamic quantum circuits, with direct relevance to applications requiring measurement and feedback such as quantum error correction.

quant-pharXiv:2604.18734•Apr 22, 2026•4 citations

Error Mitigation in Dynamic Circuits for Hamiltonian Simulation

Sumeet Shirgure, Siyuan Niu

Dynamic quantum circuits integrate mid-circuit measurements and feed-forward operations to enable real-time classical processing and conditional quantum logic. These capabilities are central to key quantum protocols such as quantum error correction, and have recently demonstrated significant potential for reducing quantum resources, including circuit depth and gate count, across a range of applications. However, executing dynamic circuits on real quantum hardware introduces a critical trade-off: while resource requirements decrease, circuit fidelity degrades due to high error rates of mid-circuit measurements, as well as the decoherence errors accumulated during the extended idle periods introduced by both mid-circuit measurements and feed-forward operations. In this paper, we systematically investigate the impact of standard error mitigation techniques on dynamic circuit applications pertaining to Hamiltonian simulation and ground state estimation of physically relevant systems like the Heisenberg model. We explore dynamical decoupling (DD) as a strategy to suppress decoherence and crosstalk errors during idle windows introduced by mid-circuit measurements and feed-forward delays, and also examine error mitigation via zero-noise extrapolation (ZNE). Through experiments conducted on IBM quantum hardware, we benchmark effective combinations of these strategies that maximize the practical benefits of dynamic quantum circuits in these applications. We demonstrate that a combination of DD and ZNE is effective in mitigating the errors introduced during mid-circuit measurements and feed-forward operations, as well as the errors arising from faulty measurements. This approach yields a energy gap improvement of at least 60% in ground state estimation and reduces observed error of time-evolved states by up to 99% for the Ising model and up to 20% for the Heisenberg model.

quant-pharXiv:2605.05256•ACM Great Lakes Symposium on VLSI (GLSVLSI)•May 7, 2026•3 citations

Dynamic Quantum Circuit Compilation

Kun Fang, Munan Zhang, Ruqi Shi +1 more

The practical applications of quantum computing is currently limited by the small number of available qubits. Recent advances in quantum hardware have introduced midcircuit measurements and resets, enabling the reuse of measured qubits and thus reducing the qubit requirements for executing quantum algorithms. In this work, we present a systematic study of dynamic quantum circuit compilation, a process that transforms static quantum circuits into their dynamic equivalents with fewer qubits through qubit reuse. We establish the first graph-based framework for optimizing qubit-reuse compilation. In particular, we characterize the task of finding the optimal compilation strategy for maximizing qubit reuse using binary integer programming and provide efficient heuristic algorithms for devising general compilation strategies. We conduct a thorough analysis of quantum circuits with practical relevance and offer their optimal qubit-reuse compilation strategies. We also perform a comparative analysis against state-of-the-art approaches, demonstrating the superior performance of our methods in both structured and random quantum circuits. Our framework lays a rigorous foundation for understanding dynamic quantum circuit compilation via qubit reuse, holding significant promise for the practical implementation of large-scale quantum algorithms on quantum computers with limited resources.

arXiv:2310.11021•IEEE Transactions on Computers•Dec 15, 2025•22 citations

Demonstrating advantages of dynamic quantum circuits on a hybrid superconducting qubit-cavity processor

Hongbo Wu, Ling Hu, Jiasheng Mai +10 more

Dynamic quantum circuits (DQCs) provide a hardware-efficient route to quantum computing by reducing physical-qubit overhead and compressing circuit topology through mid-circuit measurements, qubit reset and reuse, and classical feed-forward control. Here, we demonstrate the advantages of DQCs on a single hybrid superconducting qubit-cavity processor by implementing a hierarchy of algorithms with increasing complexity. This hybrid architecture consists of a high-dimensional cavity qudit serving as the computational register and a dispersively coupled superconducting transmon ancilla that is repeatedly measured, reset, and reused to enable dynamic control. Using this device, we implement a 10-bit Bernstein-Vazirani algorithm with an average success probability of 82%, surpassing state-of-the-art dynamic and static implementations in both scale and performance; an 8-bit quantum phase-estimation protocol with estimation errors below 10-3; and the first dynamic-circuit implementation of Shor's algorithm on a superconducting platform, factoring 15 over all coprime bases with squared statistical overlap values above 99.8%. These results provide concrete benchmarks for future DQC implementations and highlight the versatile advantages of DQCs with the hybrid qubit-qudit architecture, establishing it as a promising route toward scalable, programmable quantum computation.

quant-pharXiv:2608.04780•Aug 6, 2026•0 citations

Probing Quantum Telecloning on Superconducting Quantum Processors

Elijah Pelofske, Andreas Bärtschi, Stephan Eidenbenz +2 more

Quantum information can not be perfectly cloned, but approximate copies of quantum information can be generated. Quantum telecloning combines approximate quantum cloning, more typically referred as quantum cloning, and quantum teleportation. Quantum telecloning allows approximate copies of quantum information to be constructed by separate parties, using the classical results of a Bell measurement made on a prepared quantum telecloning state. Quantum telecloning can be implemented as a circuit on quantum computers using a classical co-processor to compute classical feed forward instructions using if statements based on the results of a mid-circuit Bell measurement in real time. We present universal, symmetric, optimal$1 \rightarrow M$telecloning circuits, and experimentally demonstrate these quantum telecloning circuits for$M=2$up to$M=10$, natively executed with real time classical control systems on IBM Quantum superconducting processors, known as dynamic circuits. We perform the cloning procedure on many different message states across the Bloch sphere, on 7 IBM Quantum processors, optionally using the error suppression technique X-X sequence digital dynamical decoupling. Two circuit optimizations are utilized, one which removes ancilla qubits for$M=2, 3$, and one which reduces the total number of gates in the circuit but still uses ancilla qubits. Parallel single qubit tomography with MLE density matrix reconstruction is used in order to compute the mixed state density matrices of the clone qubits, and clone quality is measured using quantum fidelity. These results present one of the largest and most comprehensive NISQ computer experimental analyses on (single qubit) quantum telecloning to date. The clone fidelity sharply decreases to 0.5 for$M > 5$, but for$M=2$we are able to achieve a mean clone fidelity of up to 0.79 using dynamical decoupling.

arXiv:2308.15579•IEEE Transactions on Quantum Engineering•Jan 1, 2024•8 citations

Exploiting Dynamic Quantum Circuits in a Quantum Algorithm with Superconducting Qubits

Antonio D. Corcoles, Maika Takita, Ken Inoue +4 more

To date, quantum computation on real, physical devices has largely been limited to simple, time-ordered sequences of unitary operations followed by a final projective measurement. As hardware platforms for quantum computing continue to mature in size and capability, it is imperative to enable quantum circuits beyond their conventional construction. Here we break into the realm of dynamic quantum circuits on a superconducting-based quantum system. Dynamic quantum circuits not only involve the evolution of the quantum state throughout the computation but also periodic measurements of qubits midcircuit and concurrent processing of the resulting classical information on timescales shorter than the execution times of the circuits. Using noisy quantum hardware, we explore one of the most fundamental quantum algorithms, quantum phase estimation, in its adaptive version, which exploits dynamic circuits, and compare the results to a nonadaptive implementation of the same algorithm. We demonstrate that the version of real-time quantum computing with dynamic circuits can yield results comparable to an approach involving classical asynchronous postprocessing, thus opening the door to a new realm of available algorithms on real quantum systems.

arXiv:2102.01682•Physical Review Letters•Aug 31, 2021•204 citations
In dynamic quantum circuits, classical information from midcircuit measurements is fed forward during circuit execution. This emerging capability of quantum computers confers numerous advantages that can enable more efficient and powerful protocols by drastically reducing the resource requirements for certain core algorithmic primitives. In particular, in the case of the n-qubit quantum Fourier transform followed immediately by measurement, the scaling of resource requirements is reduced from O(n^{2}) two-qubit gates in an all-to-all connectivity in the standard unitary formulation to O(n) midcircuit measurements in its dynamic counterpart without any connectivity constraints. Here, we demonstrate the advantage of dynamic quantum circuits for the quantum Fourier transform on IBM's superconducting quantum hardware with certified process fidelities of >50% on up to 16 qubits and >1% on up to 37 qubits, exceeding previous reports across all quantum computing platforms. These results are enabled by our contribution of an efficient method for certifying the process fidelity, as well as of a dynamical decoupling protocol for error suppression during midcircuit measurements and feed forward within a dynamic quantum circuit that we call "feed-forward-compensated dynamical decoupling." Our results demonstrate the advantages of leveraging dynamic circuits in optimizing the compilation of quantum algorithms.
Dynamic quantum circuits integrate unitary evolution with mid-circuit measurement and feedforward, enabling conditional operations essential for efficient quantum algorithms and foundational for fault-tolerant quantum computation. However, such operations introduce measurement-induced errors and control constraints that are not addressed by conventional error-suppression techniques. Here, we introduce an empirical learning framework that optimizes dynamical decoupling (DD) sequences for dynamic circuits at the level of circuit subintervals and qubit subregisters. Applying empirically learned DD sequences, we achieve a three-fold reduction in average dynamic circuit error rates as measured via randomized benchmarking. We apply the learned strategies to the dynamic circuit implementation of the quantum Fourier transform with measurement (QFT+M), demonstrating nontrivial process fidelity on connected chains of up to 20 qubits. Applying the resulting enhancement, we perform a high signal-to-noise QFT immediately following the preparation of a 10-qubit entangled state. Our results demonstrate that empirically optimized DD systematically outperforms theoretically derived sequences for dynamic circuits, establishing it as an efficient approach for error suppression in dynamic quantum circuits, with direct relevance to applications requiring measurement and feedback such as quantum error correction.
Dynamic quantum circuits integrate mid-circuit measurements and feed-forward operations to enable real-time classical processing and conditional quantum logic. These capabilities are central to key quantum protocols such as quantum error correction, and have recently demonstrated significant potential for reducing quantum resources, including circuit depth and gate count, across a range of applications. However, executing dynamic circuits on real quantum hardware introduces a critical trade-off: while resource requirements decrease, circuit fidelity degrades due to high error rates of mid-circuit measurements, as well as the decoherence errors accumulated during the extended idle periods introduced by both mid-circuit measurements and feed-forward operations. In this paper, we systematically investigate the impact of standard error mitigation techniques on dynamic circuit applications pertaining to Hamiltonian simulation and ground state estimation of physically relevant systems like the Heisenberg model. We explore dynamical decoupling (DD) as a strategy to suppress decoherence and crosstalk errors during idle windows introduced by mid-circuit measurements and feed-forward delays, and also examine error mitigation via zero-noise extrapolation (ZNE). Through experiments conducted on IBM quantum hardware, we benchmark effective combinations of these strategies that maximize the practical benefits of dynamic quantum circuits in these applications. We demonstrate that a combination of DD and ZNE is effective in mitigating the errors introduced during mid-circuit measurements and feed-forward operations, as well as the errors arising from faulty measurements. This approach yields a energy gap improvement of at least 60% in ground state estimation and reduces observed error of time-evolved states by up to 99% for the Ising model and up to 20% for the Heisenberg model.
The practical applications of quantum computing is currently limited by the small number of available qubits. Recent advances in quantum hardware have introduced midcircuit measurements and resets, enabling the reuse of measured qubits and thus reducing the qubit requirements for executing quantum algorithms. In this work, we present a systematic study of dynamic quantum circuit compilation, a process that transforms static quantum circuits into their dynamic equivalents with fewer qubits through qubit reuse. We establish the first graph-based framework for optimizing qubit-reuse compilation. In particular, we characterize the task of finding the optimal compilation strategy for maximizing qubit reuse using binary integer programming and provide efficient heuristic algorithms for devising general compilation strategies. We conduct a thorough analysis of quantum circuits with practical relevance and offer their optimal qubit-reuse compilation strategies. We also perform a comparative analysis against state-of-the-art approaches, demonstrating the superior performance of our methods in both structured and random quantum circuits. Our framework lays a rigorous foundation for understanding dynamic quantum circuit compilation via qubit reuse, holding significant promise for the practical implementation of large-scale quantum algorithms on quantum computers with limited resources.
Dynamic quantum circuits (DQCs) provide a hardware-efficient route to quantum computing by reducing physical-qubit overhead and compressing circuit topology through mid-circuit measurements, qubit reset and reuse, and classical feed-forward control. Here, we demonstrate the advantages of DQCs on a single hybrid superconducting qubit-cavity processor by implementing a hierarchy of algorithms with increasing complexity. This hybrid architecture consists of a high-dimensional cavity qudit serving as the computational register and a dispersively coupled superconducting transmon ancilla that is repeatedly measured, reset, and reused to enable dynamic control. Using this device, we implement a 10-bit Bernstein-Vazirani algorithm with an average success probability of 82%, surpassing state-of-the-art dynamic and static implementations in both scale and performance; an 8-bit quantum phase-estimation protocol with estimation errors below 10-3; and the first dynamic-circuit implementation of Shor's algorithm on a superconducting platform, factoring 15 over all coprime bases with squared statistical overlap values above 99.8%. These results provide concrete benchmarks for future DQC implementations and highlight the versatile advantages of DQCs with the hybrid qubit-qudit architecture, establishing it as a promising route toward scalable, programmable quantum computation.
Quantum information can not be perfectly cloned, but approximate copies of quantum information can be generated. Quantum telecloning combines approximate quantum cloning, more typically referred as quantum cloning, and quantum teleportation. Quantum telecloning allows approximate copies of quantum information to be constructed by separate parties, using the classical results of a Bell measurement made on a prepared quantum telecloning state. Quantum telecloning can be implemented as a circuit on quantum computers using a classical co-processor to compute classical feed forward instructions using if statements based on the results of a mid-circuit Bell measurement in real time. We present universal, symmetric, optimal1→M1 \rightarrow M1→Mtelecloning circuits, and experimentally demonstrate these quantum telecloning circuits forM=2M=2M=2up toM=10M=10M=10, natively executed with real time classical control systems on IBM Quantum superconducting processors, known as dynamic circuits. We perform the cloning procedure on many different message states across the Bloch sphere, on 7 IBM Quantum processors, optionally using the error suppression technique X-X sequence digital dynamical decoupling. Two circuit optimizations are utilized, one which removes ancilla qubits forM=2,3M=2, 3M=2,3, and one which reduces the total number of gates in the circuit but still uses ancilla qubits. Parallel single qubit tomography with MLE density matrix reconstruction is used in order to compute the mixed state density matrices of the clone qubits, and clone quality is measured using quantum fidelity. These results present one of the largest and most comprehensive NISQ computer experimental analyses on (single qubit) quantum telecloning to date. The clone fidelity sharply decreases to 0.5 forM>5M > 5M>5, but forM=2M=2M=2we are able to achieve a mean clone fidelity of up to 0.79 using dynamical decoupling.
To date, quantum computation on real, physical devices has largely been limited to simple, time-ordered sequences of unitary operations followed by a final projective measurement. As hardware platforms for quantum computing continue to mature in size and capability, it is imperative to enable quantum circuits beyond their conventional construction. Here we break into the realm of dynamic quantum circuits on a superconducting-based quantum system. Dynamic quantum circuits not only involve the evolution of the quantum state throughout the computation but also periodic measurements of qubits midcircuit and concurrent processing of the resulting classical information on timescales shorter than the execution times of the circuits. Using noisy quantum hardware, we explore one of the most fundamental quantum algorithms, quantum phase estimation, in its adaptive version, which exploits dynamic circuits, and compare the results to a nonadaptive implementation of the same algorithm. We demonstrate that the version of real-time quantum computing with dynamic circuits can yield results comparable to an approach involving classical asynchronous postprocessing, thus opening the door to a new realm of available algorithms on real quantum systems.