Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2403.08731 · Applied Physics Letters

Fault localization in a microfabricated surface ion trap using diamond nitrogen-vacancy center magnetometry

Pauli Kehayias, Matthew A. Delaney, Raymond A. Haltli, Susan Clark, Melissa Revelle, Andrew M. Mounce

Published Dec 16, 2024• 6 citations
arXivHTMLPDF

Abstract

As quantum computing hardware becomes more complex with ongoing design innovations and growing capabilities, the quantum computing community needs increasingly powerful techniques for fabrication failure root-cause analysis. This is especially true for trapped-ion quantum computing. As trapped-ion quantum computing aims to scale to thousands of ions, the electrode numbers are growing to several hundred, with likely integrated photonic components also adding to the electrical and fabrication complexity, making faults even harder to locate. In this work, we used a high-resolution quantum magnetic imaging technique, based on nitrogen-vacancy centers in diamond, to investigate short-circuit faults in an ion trap chip. We imaged currents from these short-circuit faults to ground and compared them to intentionally created faults, finding that the root cause of the faults was failures in the on-chip trench capacitors. This work, where we exploited the performance advantages of a quantum magnetic sensing technique to troubleshoot a piece of quantum computing hardware, is a unique example of the evolving synergy between emerging quantum technologies to achieve capabilities that were previously inaccessible.

DOI
10.1063/5.0234269

Related papers

Optics-Based Quantum Information and Sensing Platforms Utilizing the Nitrogen-Vacancy Center in Diamond

Michael N. Gould

The nitrogen-vacancy (NV) center is a point defect in the diamond crystal lattice, forming a localized-electron system with unique optical and spin properties. In particular, optical control and read-out of the spin state, combined with long spin coherence times, make it an attractive candidate for both high-sensitivity magnetometry and as a solid-state spin qubit for quantum information processing (QIP). This dissertation documents the design, implementation, and characterization of systems aimed at each of these applications. First, the development of a GaP-on-diamond integrated photonics platform for QIP is presented. This work is motivated in part by the scalability advantages that are inherent to photonic device integration, and more fundamentally by the large potential improvements in performance. Specifically, coupling NV centers to integrated optical resonators should enable orders of magnitude improvement in entanglement generation rate through improved photon collection efficiency. This will be crucial for the development of even small-scale QIP systems, as NV-NV spin entanglement has so far only been demonstrated at rates far below the spin decoherence rate, effectively limiting NV-based QIP to two-qubit systems. Large numbers of integrated optical devices were fabricated, including optical resonators. Passive transmission measurements were performed on hundreds of individual devices, enabling statistical performance metrics and device yields to be extracted for several components. Device-coupled single-photon measurements are also presented, indicating photon collection efficiencies as high as 9%, corresponding to an efficiency-limited entanglement rate far exceeding the best reported spin decoherence rate. These results put the GaP-on-diamond platform in a competitive position relative to other photonic integration efforts for QIP. Next, a magneto-optical microscope for bio-sensing applications is presented. The microscope images photoluminescence emitted from a thin, dense sheet of NV centers within the top 200 nm of a diamond chip. Changes in the photoluminescence associated with the spin population of the defects allow for optically detected magnetic resonance (ODMR), with the resonant frequency depending on the local magnetic field. Two-dimensional images of the magnetic field at the surface of the diamond are thus obtained, with a magnetic field sensitivity of 2.4 μT. The microscope was able to detect magnetic-field disturbances due to the presence of single 19-nm-diameter super-paramagnetic nanoparticles (SPNs) in wide-field ODMR images taken at room temperature. This is the first demonstration of wide-field detection of individual sub-μm magnetic particles under ambient conditions, and should enable a new class of biological imaging and sensing systems based on SPN labels.

•Aug 1, 2016•0 citations

Coherent control of nitrogen-vacancy centers in diamond nanostructures for quantum sensing and networking

Edward H. Chen

The exceptional optical and spin properties of the negatively charged nitrogen-vacancy (NV-) center in diamond have led to numerous applications ranging from super-resolution imaging to the exploration of previously untested new phenomena using quantum entanglement for information processing and sensing.The solid-state environment of the diamond allows us to engineer nanostructures, which are promising for enhancing the optical and spin properties of the NV-.To help develop a component needed for a diamondbased quantum network, we recently achieved coherent electron spin control of long-lived NV-s in diamond nanostructures using a transferrable hard-mask for both etching and ion implantation.We also developed a super-resolution imaging technique for characterizing such systems, and we furthermore demonstrate high-sensitivity electrometry using a large number of NV-s.However, it remains an open area of investigation whether certain nano-fabrication processes for patterning nanostructures into diamond cause irrecoverable damage or introduce atomic impurities to the crystal that would lead to a significant degradation of the NV-properties.Another remaining challenge is to produce fault-tolerant multi-qubit registers within nanostructures for improved robustness and scalability for use in compact quantum sensors or quantum networks.By building on the results in this thesis, it may be possible to design nanostructures for enhancing initialization, control and read-out fidelities of defect-based solid-state quantum technologies.

•Jan 1, 2016•0 citations

Quantum Diamond Microscopy for Non-Destructive Failure Analysis of an Integrated Fan-Out Package-on-Package iPhone Chip

Bartu Bisgin, Marwa Garsi, Andreas Welscher +2 more

The increasing complexity of advanced semiconductor packages, driven by chiplet architectures and 2.5D/3D integration, challenges conventional failure localization methods such as lock-in thermography (LIT) and complicates current Failure Analysis (FA) workflows. Dense redistribution layers and buried interconnects limit the ability of established techniques to understand failure mechanisms non-destructively. In this work, we validate quantum diamond microscopy (QDM) based on nitrogen-vacancy (NV) centers in diamond as a non-destructive localization method through magnetic current path imaging at the package level. Using commercial Integrated Fan-Out Package-on- Package (InFO-PoP) devices from iPhones, we showcase a complete FA workflow that includes QDM to localize a short-type failure at an Integrated Passive Device (IPD) at the package backside. We showcase that the QDM results provide invaluable information on top of conventional techniques and can significantly enhance root-cause identification in package-level FA workflows. This work demonstrates the potential of QDM for broader integration into semiconductor chip and package analysis workflows.

quant-pharXiv:2512.07619•Dec 9, 2025

Development of microfabricated ion traps for scalable microwave quantum technology

Bjoern Lekitsch

Microfabricated ion traps are an important tool in the development of scalable quantum systems. Tremendous advancements towards an ion quantum computer were made in the past decade and most requirements for a quantum computer have been fulfilled in individual experiments. Incorporating all essential capabilities in a fully scalable system will require the further advancement of established quantum information technologies and development of new trap fabrication techniques. In my thesis I will discuss the theoretical background and experimental setup required for the operation of ion traps. Measurement of the important ion trap heating rate was performed in the setup and I will discuss the results in more detail. I will give a review of microfabrication processes used for the fabrication of traps, outlining advantages, disadvantages and issues inherent to the processes. Following the review I will present my work on a concept for a scalable ion trap quantum system based on microwave quantum gates and shuttling through X-junctions. Many of the required building blocks, including ion trap structures with current-carrying wires intended to create strong magnetic field gradients for microwave gates were investigated further. A novel fabrication process was developed to combine current-carrying wires with advanced multilayered ion trap structures. Several trap designs intended for proof of principle experiments of high fidelity microwave gates, advanced detection techniques and shuttling between electrically disconnected ion traps will be presented. Also the electrode geometry of an optimized X-junction design with strongly suppressed rf barrier height will be presented. Further, I developed several modifications for the experimental setup to extend the existing capabilities. A plasma source capable of performing in-situ cleans of the trap electrode surfaces, which has been demonstrated to dramatically reduce the heating rate in ion traps, was incorporated. I will also present a vacuum system modification designed to cool ion traps with current-carrying wires and transport the generated heat out of the vacuum system. In addition a novel low-noise, high-speed, multichannel voltage control system was developed by me. The device can be used in future experiments to precisely shuttle ions from one trapping zone to another and also to shuttle ions through ion trap junctions. Lastly I will outline the process optimization and microfabrication of my ion trap designs. A novel fabrication process which makes use of the extremely high thermal conductivity of diamond substrates and combines it with thick copper tracks embedded in the substrate was developed. Large currents will be passed through the wires creating a strong and controllable magnetic field gradient. Ion trap designs with isolated electrodes connected via buried wires can be placed on top of the current-carrying wires, allowing the most advanced electrode designs to be fabricated with current-carrying wires.

•May 18, 2015•0 citations

Generation of Nitrogen-Vacancy Centers in Diamond with Ion Implantation

Jin‐Ming Cui, Xiang-Dong Chen, Lele Fan +5 more

Nitrogen-vacancy defect color centers are created in a high purity single crystal diamond by nitrogen-ion implantation. Both optical spectrum and optically detected magnetic resonance are measured for these artificial quantum emitters. Moreover, with a suitable mask, a lattice composed of nitrogen-vacancy centers is fabricated. Rabi oscillation driven by micro-waves is carried out to show the quality of the ion implantation and potential in quantum manipulation. Along with compatible standard lithography, such an implantation technique shows high potential in future to make structures with nitrogen-vacancy centers for diamond photonics and integrated photonic quantum chip.

Chinese Physics Letters•Mar 1, 2012•22 citations

New Quantum Sensing Modalities of Nitrogen-Vacancy Centers

Qiu, Ziwei

The recent decade has witnessed exciting developments in quantum science and technology. Quantum sensing is a rapidly growing branch, which exploits the fragility of quantum systems to detect small external signals. The extreme control at the single-atom level and the remarkably long coherence time of engineered quantum systems enable unprecedented sensitivity and precision, beating the performance of classical techniques. The nitrogen-vacancy (NV) center in diamond is one of the most promising quantum sensors. Its unique advantages have attracted considerable attention, including a long spin coherence time throughout a broad temperature range, nanoscale resolution limited by the sensor-sample distance, convenient optical control of its spin states and remarkably versatile sensing capabilities. Its properties are well studied under a bias magnetic field oriented along its quantization axis. However, its sensing capabilities in the presence of an off-axis magnetic field are much less explored. My research aims to unlock the full potential of NV quantum sensor by developing new sensing modalities under a magnetic field acting perpendicular to the NV axis, and furthermore, integrating them into a scanning probe microscope. In this dissertation, I will report our progress toward building a scanning NV multimodal quantum imaging platform, which will open up exciting opportunities in measuring nanoscale phenomena. The first chapter provides an introduction to the background of quantum sensing with NV centers, followed by a discussion on its basic properties and established sensing techniques. The second and third chapters are dedicated to two experiments performed under a perpendicular magnetic field where traditional NV magnetometry based on the Zeeman effect fails. In the second chapter, I will introduce a new sensing strategy that uses the entanglement between the electron and nuclear spins to restore the magnetic field sensitivity under this unfavored condition. This allows us to sense small changes in the magnetic field angle relative to the NV axis, and to detect anisotropic magnetic noise in the local environment. In the third chapter, I will present our latest development of scanning NV electrometry, where a single NV at the apex of a diamond scanning probe images external alternating (AC) and direct (DC) electric fields with sub-100 nm resolution. In the last chapter, I will discuss our efforts on four experiments that were left unfinished. I will present the results we have achieved, analyze the challenges that we faced and propose potential solutions to overcome them.

•Jan 1, 2022•0 citations
As quantum computing hardware becomes more complex with ongoing design innovations and growing capabilities, the quantum computing community needs increasingly powerful techniques for fabrication failure root-cause analysis. This is especially true for trapped-ion quantum computing. As trapped-ion quantum computing aims to scale to thousands of ions, the electrode numbers are growing to several hundred, with likely integrated photonic components also adding to the electrical and fabrication complexity, making faults even harder to locate. In this work, we used a high-resolution quantum magnetic imaging technique, based on nitrogen-vacancy centers in diamond, to investigate short-circuit faults in an ion trap chip. We imaged currents from these short-circuit faults to ground and compared them to intentionally created faults, finding that the root cause of the faults was failures in the on-chip trench capacitors. This work, where we exploited the performance advantages of a quantum magnetic sensing technique to troubleshoot a piece of quantum computing hardware, is a unique example of the evolving synergy between emerging quantum technologies to achieve capabilities that were previously inaccessible.
The nitrogen-vacancy (NV) center is a point defect in the diamond crystal lattice, forming a localized-electron system with unique optical and spin properties. In particular, optical control and read-out of the spin state, combined with long spin coherence times, make it an attractive candidate for both high-sensitivity magnetometry and as a solid-state spin qubit for quantum information processing (QIP). This dissertation documents the design, implementation, and characterization of systems aimed at each of these applications. First, the development of a GaP-on-diamond integrated photonics platform for QIP is presented. This work is motivated in part by the scalability advantages that are inherent to photonic device integration, and more fundamentally by the large potential improvements in performance. Specifically, coupling NV centers to integrated optical resonators should enable orders of magnitude improvement in entanglement generation rate through improved photon collection efficiency. This will be crucial for the development of even small-scale QIP systems, as NV-NV spin entanglement has so far only been demonstrated at rates far below the spin decoherence rate, effectively limiting NV-based QIP to two-qubit systems. Large numbers of integrated optical devices were fabricated, including optical resonators. Passive transmission measurements were performed on hundreds of individual devices, enabling statistical performance metrics and device yields to be extracted for several components. Device-coupled single-photon measurements are also presented, indicating photon collection efficiencies as high as 9%, corresponding to an efficiency-limited entanglement rate far exceeding the best reported spin decoherence rate. These results put the GaP-on-diamond platform in a competitive position relative to other photonic integration efforts for QIP. Next, a magneto-optical microscope for bio-sensing applications is presented. The microscope images photoluminescence emitted from a thin, dense sheet of NV centers within the top 200 nm of a diamond chip. Changes in the photoluminescence associated with the spin population of the defects allow for optically detected magnetic resonance (ODMR), with the resonant frequency depending on the local magnetic field. Two-dimensional images of the magnetic field at the surface of the diamond are thus obtained, with a magnetic field sensitivity of 2.4 μT. The microscope was able to detect magnetic-field disturbances due to the presence of single 19-nm-diameter super-paramagnetic nanoparticles (SPNs) in wide-field ODMR images taken at room temperature. This is the first demonstration of wide-field detection of individual sub-μm magnetic particles under ambient conditions, and should enable a new class of biological imaging and sensing systems based on SPN labels.
The exceptional optical and spin properties of the negatively charged nitrogen-vacancy (NV-) center in diamond have led to numerous applications ranging from super-resolution imaging to the exploration of previously untested new phenomena using quantum entanglement for information processing and sensing.The solid-state environment of the diamond allows us to engineer nanostructures, which are promising for enhancing the optical and spin properties of the NV-.To help develop a component needed for a diamondbased quantum network, we recently achieved coherent electron spin control of long-lived NV-s in diamond nanostructures using a transferrable hard-mask for both etching and ion implantation.We also developed a super-resolution imaging technique for characterizing such systems, and we furthermore demonstrate high-sensitivity electrometry using a large number of NV-s.However, it remains an open area of investigation whether certain nano-fabrication processes for patterning nanostructures into diamond cause irrecoverable damage or introduce atomic impurities to the crystal that would lead to a significant degradation of the NV-properties.Another remaining challenge is to produce fault-tolerant multi-qubit registers within nanostructures for improved robustness and scalability for use in compact quantum sensors or quantum networks.By building on the results in this thesis, it may be possible to design nanostructures for enhancing initialization, control and read-out fidelities of defect-based solid-state quantum technologies.
The increasing complexity of advanced semiconductor packages, driven by chiplet architectures and 2.5D/3D integration, challenges conventional failure localization methods such as lock-in thermography (LIT) and complicates current Failure Analysis (FA) workflows. Dense redistribution layers and buried interconnects limit the ability of established techniques to understand failure mechanisms non-destructively. In this work, we validate quantum diamond microscopy (QDM) based on nitrogen-vacancy (NV) centers in diamond as a non-destructive localization method through magnetic current path imaging at the package level. Using commercial Integrated Fan-Out Package-on- Package (InFO-PoP) devices from iPhones, we showcase a complete FA workflow that includes QDM to localize a short-type failure at an Integrated Passive Device (IPD) at the package backside. We showcase that the QDM results provide invaluable information on top of conventional techniques and can significantly enhance root-cause identification in package-level FA workflows. This work demonstrates the potential of QDM for broader integration into semiconductor chip and package analysis workflows.
Microfabricated ion traps are an important tool in the development of scalable quantum systems. Tremendous advancements towards an ion quantum computer were made in the past decade and most requirements for a quantum computer have been fulfilled in individual experiments. Incorporating all essential capabilities in a fully scalable system will require the further advancement of established quantum information technologies and development of new trap fabrication techniques. In my thesis I will discuss the theoretical background and experimental setup required for the operation of ion traps. Measurement of the important ion trap heating rate was performed in the setup and I will discuss the results in more detail. I will give a review of microfabrication processes used for the fabrication of traps, outlining advantages, disadvantages and issues inherent to the processes. Following the review I will present my work on a concept for a scalable ion trap quantum system based on microwave quantum gates and shuttling through X-junctions. Many of the required building blocks, including ion trap structures with current-carrying wires intended to create strong magnetic field gradients for microwave gates were investigated further. A novel fabrication process was developed to combine current-carrying wires with advanced multilayered ion trap structures. Several trap designs intended for proof of principle experiments of high fidelity microwave gates, advanced detection techniques and shuttling between electrically disconnected ion traps will be presented. Also the electrode geometry of an optimized X-junction design with strongly suppressed rf barrier height will be presented. Further, I developed several modifications for the experimental setup to extend the existing capabilities. A plasma source capable of performing in-situ cleans of the trap electrode surfaces, which has been demonstrated to dramatically reduce the heating rate in ion traps, was incorporated. I will also present a vacuum system modification designed to cool ion traps with current-carrying wires and transport the generated heat out of the vacuum system. In addition a novel low-noise, high-speed, multichannel voltage control system was developed by me. The device can be used in future experiments to precisely shuttle ions from one trapping zone to another and also to shuttle ions through ion trap junctions. Lastly I will outline the process optimization and microfabrication of my ion trap designs. A novel fabrication process which makes use of the extremely high thermal conductivity of diamond substrates and combines it with thick copper tracks embedded in the substrate was developed. Large currents will be passed through the wires creating a strong and controllable magnetic field gradient. Ion trap designs with isolated electrodes connected via buried wires can be placed on top of the current-carrying wires, allowing the most advanced electrode designs to be fabricated with current-carrying wires.
Nitrogen-vacancy defect color centers are created in a high purity single crystal diamond by nitrogen-ion implantation. Both optical spectrum and optically detected magnetic resonance are measured for these artificial quantum emitters. Moreover, with a suitable mask, a lattice composed of nitrogen-vacancy centers is fabricated. Rabi oscillation driven by micro-waves is carried out to show the quality of the ion implantation and potential in quantum manipulation. Along with compatible standard lithography, such an implantation technique shows high potential in future to make structures with nitrogen-vacancy centers for diamond photonics and integrated photonic quantum chip.
The recent decade has witnessed exciting developments in quantum science and technology. Quantum sensing is a rapidly growing branch, which exploits the fragility of quantum systems to detect small external signals. The extreme control at the single-atom level and the remarkably long coherence time of engineered quantum systems enable unprecedented sensitivity and precision, beating the performance of classical techniques. The nitrogen-vacancy (NV) center in diamond is one of the most promising quantum sensors. Its unique advantages have attracted considerable attention, including a long spin coherence time throughout a broad temperature range, nanoscale resolution limited by the sensor-sample distance, convenient optical control of its spin states and remarkably versatile sensing capabilities. Its properties are well studied under a bias magnetic field oriented along its quantization axis. However, its sensing capabilities in the presence of an off-axis magnetic field are much less explored. My research aims to unlock the full potential of NV quantum sensor by developing new sensing modalities under a magnetic field acting perpendicular to the NV axis, and furthermore, integrating them into a scanning probe microscope. In this dissertation, I will report our progress toward building a scanning NV multimodal quantum imaging platform, which will open up exciting opportunities in measuring nanoscale phenomena. The first chapter provides an introduction to the background of quantum sensing with NV centers, followed by a discussion on its basic properties and established sensing techniques. The second and third chapters are dedicated to two experiments performed under a perpendicular magnetic field where traditional NV magnetometry based on the Zeeman effect fails. In the second chapter, I will introduce a new sensing strategy that uses the entanglement between the electron and nuclear spins to restore the magnetic field sensitivity under this unfavored condition. This allows us to sense small changes in the magnetic field angle relative to the NV axis, and to detect anisotropic magnetic noise in the local environment. In the third chapter, I will present our latest development of scanning NV electrometry, where a single NV at the apex of a diamond scanning probe images external alternating (AC) and direct (DC) electric fields with sub-100 nm resolution. In the last chapter, I will discuss our efforts on four experiments that were left unfinished. I will present the results we have achieved, analyze the challenges that we faced and propose potential solutions to overcome them.