Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2403.07446 · Review of Scientific Instruments

Compact structures for single-beam magneto-optical trapping of ytterbium

Julian Pick, R. Schwarz, J. Kruse, Christian Lisdat, Carsten Klempt

Published Jul 1, 2024• 11 citations
arXivHTMLPDF

Abstract

At present, the best optical lattice clocks are based on the spectroscopy of trapped alkaline-earth-like atoms such as ytterbium and strontium. The development of mobile or even space-borne clocks necessitates concepts for the compact laser-cooling and trapping of these atoms with reduced laser requirements. Here, we present two compact and robust achromatic mirror structures for single-beam magneto-optical trapping of alkaline-earth-like atoms using two widely separated optical cooling frequencies. We have compared the trapping and cooling performance of a monolithic aluminum structure that generates a conventional trap geometry to a quasi-planar platform based on a periodic mirror structure for different isotopes of Yb. Compared to prior work with strontium in non-conventional traps, where only bosons were trapped on a narrow line transition, we demonstrate two-stage cooling and trapping of a fermionic alkaline-earth-like isotope in a single-beam quasi-planar structure.

DOI
10.1063/5.0203308

Related papers

Achromatic, planar Fresnel-reflector for a single-beam magneto-optical trap

Saskia Bondza, Tobias Leopold, R. Schwarz +1 more

We present a novel achromatic, planar, periodic mirror structure for single-beam magneto-optical trapping and demonstrate its use in the first- and second-stage cooling and trapping for different isotopes of strontium. We refer to it as a Fresnel magneto-optical trap (MOT) as the structure is inspired by Fresnel lenses. By design, it avoids many of the problems that arise for multi-color cooling using planar structures based on diffraction gratings, which have been the dominant planar structures to be used for single-beam trapping thus far. In addition to a complex design process and cost-intensive fabrication, diffraction gratings suffer from their inherent chromaticity, which causes different axial displacements of trap volumes for different wavelengths and necessitates trade-offs in their diffraction properties and achievable trap depths. In contrast, the Fresnel-reflector structure presented here is a versatile, easy-to-manufacture device that combines achromatic beam steering with the advantages of a planar architecture. It enables miniaturizing trapping systems for alkaline-earth-like atoms with multiple cooling transitions as well as multi-species trapping in the ideal tetrahedral configuration and within the same volume above the structure. Our design presents a novel approach for the miniaturization of cold-atom systems based on single-beam MOTs and enables the widespread adoption of these systems.

arXiv:2310.14861•Review of Scientific Instruments•Jan 1, 2024•13 citations

Compact atom sources for optical frequency standards

Julian Pick

Atomic clocks are crucial for precise time dissemination, supporting industrial applications for navigation, telecommunication, the financial system, and the energy industry by ensuring accurate timekeeping and synchronization. At present, the best atomic clocks are based on optical transitions. Optical lattice clocks based on Yb or Sr achieve fractional frequency uncertainties in the low 10^(-18) regime. This remarkable accuracy allows resolving the gravitational redshift on the centimeter scale. This progress has driven the development of compact transportable optical lattice clocks, which are crucial for field- or even space applications. Especially for space operation, there is a critical need to minimize size, weight and power consumption of key components, particularly the source of laser-cooled atoms. Conventional atom sources for optical lattice clocks consist of an atomic oven with a high power consumption and a six-beam magneto-optical trap (MOT) that requires a large and complex optical setup. This thesis addresses the technical challenges associated with the development of compact sources of laser-cooled alkaline-earth-like atoms by demonstrating a miniaturized atomic oven and a miniaturized MOT for Yb and Sr. The MOT generation is tested with three types of in-vacuum optical elements that generate all the required laser beams for three-dimensional trapping and cooling with only one single input beam. A quasi-monolithic aluminum structure generating a conventional MOT beam geometry that is called pyramid reflector is compared to a quasi-planar optical element called Fresnel reflector. Both are characterized and compared using the same high-flux Yb source. Particularly, two-stage cooling of a fermionic alkaline-earth-like atom in a non-conventional MOT configuration is performed for the first time, demonstrating the applicability of planar MOT optics in optical lattice clocks. Furthermore, a planar diffraction grating is combined with the miniaturized atomic oven inside a highly compact vacuum chamber. The atomic oven is based on a circular fused silica chip and is tested by loading an Yb MOT generated with the pyramid reflector and a Sr MOT generated with the diffraction grating. It requires less than 250 mW of electrical heating power to generate a MOT loading rate above 10^8 atoms/s with the pyramid reflector. The presented components form a compact source of laser-cooled Yb or Sr atoms, and, when combined with a compact optical lattice setup, will serve as the basic building blocks of a future transportable optical lattice clock.

•Jan 1, 2026•0 citations

Miniaturized setups for magneto-optical trapping of ytterbium and strontium

Julian Pick, Julia Voß, Florian Löwinger +6 more

Optical lattice clocks based on ytterbium (Yb) and strontium (Sr) are emerging as key technologies in precision timekeeping and metrology. Recent advancements in miniaturization and transportability are making them increasingly accessible for applications outside traditional laboratory settings. However, the degree of miniaturization is limited by the atomic source that is used to provide laser-cooled atoms for the clock spectroscopy. Conventional atomic sources for optical lattice clocks consist of a high-power oven and a magneto-optical trap (MOT) that requires six incident laser beams for three-dimensional trapping and cooling. Here, we present technologies that allow a significant miniaturization of the required experimental setups to realize a MOT for Yb and Sr. These are a chip-based microstructured atomic oven and in-vacuum optical elements that require only a single incident laser beam to generate all of the required beams for three-dimensional trapping and cooling. The oven was manufactured with LIDE® (laser induced deep etching). It was paired with an aluminum pyramid reflector to load Yb atoms into a MOT. The oven was placed directly at the outside of the reflector, forming a compact setup that is used for atom evaporation and direct trapping and cooling. In this configuration, MOT loading rates above 10^8 atoms/s were measured for oven heating powers below 250 mW. Furthermore, the microstructured oven was paired with a grating MOT chip inside a highly compact vacuum chamber. The chamber was additively manufactured from titanium and the assembled setup spans a volume of less than 750 ml. In this setup, up to 10^5 Sr atoms were trapped in the MOT.

•Jan 1, 2026•0 citations

Second-Stage Laser Cooling of Ytterbium Atoms without Using a First-Stage Magneto-Optical Trap

Anton P. Vyalykh, Anastasia V. Semenko, A. V. Kohanov +2 more

A compact laser cooling system for transportable optical lattice clocks based on cold 171 Yb atoms has been presented. The system size has been reduced by eliminating the first cooling stage and using compact configurations for the main subsystems of the laser cooling system. A Zeeman slower has been modeled and developed, reducing the velocity of atoms from a thermal source to a level sufficient for their direct capture in a second-stage magneto-optical trap, avoiding the first cooling stage. A method for estimating the number of atoms and their temperature in the magneto-optical trap is presented. The performance of the compact laser cooling system with the developed Zeeman slower has been experimentally confirmed: ~10 6 171 Yb atoms with a temperature of ~35 μK have been collected in ~1 s. The achieved parameters allow for loading of ~4000 atoms into the optical lattice.

Journal of Experimental and Theoretical Physics Letters•Jun 1, 2026•0 citations

Optical Trapping of Ytterbium Atoms

Reina H. Maruyama

This dissertation describes an experimental study on magneto-optical trapping (MOT) of ytterbium atoms. In particular, Doppler cooling and sub-Doppler cooling have been investigated and compared in the same atom, and sub-Doppler cooling has been studied in two isotopes of ytterbium possessing different nuclear angular momenta. Ytterbium offers a unique combination of having a closed S-shell in the ground state, several isotopes with high abundances, and two transitions that are accessible by lasers that can be used for laser cooling and trapping. Laser cooling with several different ground-state angular momenta can be studied by simply changing isotopes with little changes to the experimental parameters.All seven stable isotopes of ytterbium have been slowed from an atomic beam, trapped in a MOT using the strong 1S 0-1P1 line and transfered into a second MOT using the 1S0- 3P1 intercombination line. The apparatus developed for this experiment is described in detail, including the lasers used for both transitions at 399 nm and 556 nm. Trap properties such as temperature, spring constant, lifetime of the traps, and isotope dependence of cooling mechanisms in the 1S0- 3P1 trap were investigated. Doppler cooling was studied in even isotopes with no spin in the ground state. Sisyphus cooling in the ground state of odd isotopes of alkaline-earth-like atoms with zero electronic and non-zero nuclear angular momentum was demonstrated for the first time, and compared with numerical simulations. Future directions that exploit the unique features of ytterbium are also discussed.

•Jan 1, 2003•8 citations

Robust Optical Clocks Based on Alkaline-Earth Vapor Cells

Jordan L. Armstrong, N. Lemke, Kyle W. Martin +1 more

Alkaline-earth atoms offer spectrally narrow transitions that are attractive for optical frequency standards. Thus far, experiments have been limited to laser-cooled and atomic beam geometries. We present compact vapor cell solutions for realizing high-performance single-laser alkaline-earth clocks that are simple in design.

Proceedings of the ... annual Precise Time and Time Interval (PTTI) Systems and Applications Meeting/Proceedings of a meeting - Precise Time and Time Interval (PTTI) Systems and Applications Meeting•Feb 26, 2016•1 citation
At present, the best optical lattice clocks are based on the spectroscopy of trapped alkaline-earth-like atoms such as ytterbium and strontium. The development of mobile or even space-borne clocks necessitates concepts for the compact laser-cooling and trapping of these atoms with reduced laser requirements. Here, we present two compact and robust achromatic mirror structures for single-beam magneto-optical trapping of alkaline-earth-like atoms using two widely separated optical cooling frequencies. We have compared the trapping and cooling performance of a monolithic aluminum structure that generates a conventional trap geometry to a quasi-planar platform based on a periodic mirror structure for different isotopes of Yb. Compared to prior work with strontium in non-conventional traps, where only bosons were trapped on a narrow line transition, we demonstrate two-stage cooling and trapping of a fermionic alkaline-earth-like isotope in a single-beam quasi-planar structure.
We present a novel achromatic, planar, periodic mirror structure for single-beam magneto-optical trapping and demonstrate its use in the first- and second-stage cooling and trapping for different isotopes of strontium. We refer to it as a Fresnel magneto-optical trap (MOT) as the structure is inspired by Fresnel lenses. By design, it avoids many of the problems that arise for multi-color cooling using planar structures based on diffraction gratings, which have been the dominant planar structures to be used for single-beam trapping thus far. In addition to a complex design process and cost-intensive fabrication, diffraction gratings suffer from their inherent chromaticity, which causes different axial displacements of trap volumes for different wavelengths and necessitates trade-offs in their diffraction properties and achievable trap depths. In contrast, the Fresnel-reflector structure presented here is a versatile, easy-to-manufacture device that combines achromatic beam steering with the advantages of a planar architecture. It enables miniaturizing trapping systems for alkaline-earth-like atoms with multiple cooling transitions as well as multi-species trapping in the ideal tetrahedral configuration and within the same volume above the structure. Our design presents a novel approach for the miniaturization of cold-atom systems based on single-beam MOTs and enables the widespread adoption of these systems.
Atomic clocks are crucial for precise time dissemination, supporting industrial applications for navigation, telecommunication, the financial system, and the energy industry by ensuring accurate timekeeping and synchronization. At present, the best atomic clocks are based on optical transitions. Optical lattice clocks based on Yb or Sr achieve fractional frequency uncertainties in the low 10^(-18) regime. This remarkable accuracy allows resolving the gravitational redshift on the centimeter scale. This progress has driven the development of compact transportable optical lattice clocks, which are crucial for field- or even space applications. Especially for space operation, there is a critical need to minimize size, weight and power consumption of key components, particularly the source of laser-cooled atoms. Conventional atom sources for optical lattice clocks consist of an atomic oven with a high power consumption and a six-beam magneto-optical trap (MOT) that requires a large and complex optical setup. This thesis addresses the technical challenges associated with the development of compact sources of laser-cooled alkaline-earth-like atoms by demonstrating a miniaturized atomic oven and a miniaturized MOT for Yb and Sr. The MOT generation is tested with three types of in-vacuum optical elements that generate all the required laser beams for three-dimensional trapping and cooling with only one single input beam. A quasi-monolithic aluminum structure generating a conventional MOT beam geometry that is called pyramid reflector is compared to a quasi-planar optical element called Fresnel reflector. Both are characterized and compared using the same high-flux Yb source. Particularly, two-stage cooling of a fermionic alkaline-earth-like atom in a non-conventional MOT configuration is performed for the first time, demonstrating the applicability of planar MOT optics in optical lattice clocks. Furthermore, a planar diffraction grating is combined with the miniaturized atomic oven inside a highly compact vacuum chamber. The atomic oven is based on a circular fused silica chip and is tested by loading an Yb MOT generated with the pyramid reflector and a Sr MOT generated with the diffraction grating. It requires less than 250 mW of electrical heating power to generate a MOT loading rate above 10^8 atoms/s with the pyramid reflector. The presented components form a compact source of laser-cooled Yb or Sr atoms, and, when combined with a compact optical lattice setup, will serve as the basic building blocks of a future transportable optical lattice clock.
Optical lattice clocks based on ytterbium (Yb) and strontium (Sr) are emerging as key technologies in precision timekeeping and metrology. Recent advancements in miniaturization and transportability are making them increasingly accessible for applications outside traditional laboratory settings. However, the degree of miniaturization is limited by the atomic source that is used to provide laser-cooled atoms for the clock spectroscopy. Conventional atomic sources for optical lattice clocks consist of a high-power oven and a magneto-optical trap (MOT) that requires six incident laser beams for three-dimensional trapping and cooling. Here, we present technologies that allow a significant miniaturization of the required experimental setups to realize a MOT for Yb and Sr. These are a chip-based microstructured atomic oven and in-vacuum optical elements that require only a single incident laser beam to generate all of the required beams for three-dimensional trapping and cooling. The oven was manufactured with LIDE® (laser induced deep etching). It was paired with an aluminum pyramid reflector to load Yb atoms into a MOT. The oven was placed directly at the outside of the reflector, forming a compact setup that is used for atom evaporation and direct trapping and cooling. In this configuration, MOT loading rates above 10^8 atoms/s were measured for oven heating powers below 250 mW. Furthermore, the microstructured oven was paired with a grating MOT chip inside a highly compact vacuum chamber. The chamber was additively manufactured from titanium and the assembled setup spans a volume of less than 750 ml. In this setup, up to 10^5 Sr atoms were trapped in the MOT.
A compact laser cooling system for transportable optical lattice clocks based on cold 171 Yb atoms has been presented. The system size has been reduced by eliminating the first cooling stage and using compact configurations for the main subsystems of the laser cooling system. A Zeeman slower has been modeled and developed, reducing the velocity of atoms from a thermal source to a level sufficient for their direct capture in a second-stage magneto-optical trap, avoiding the first cooling stage. A method for estimating the number of atoms and their temperature in the magneto-optical trap is presented. The performance of the compact laser cooling system with the developed Zeeman slower has been experimentally confirmed: ~10 6 171 Yb atoms with a temperature of ~35 μK have been collected in ~1 s. The achieved parameters allow for loading of ~4000 atoms into the optical lattice.
This dissertation describes an experimental study on magneto-optical trapping (MOT) of ytterbium atoms. In particular, Doppler cooling and sub-Doppler cooling have been investigated and compared in the same atom, and sub-Doppler cooling has been studied in two isotopes of ytterbium possessing different nuclear angular momenta. Ytterbium offers a unique combination of having a closed S-shell in the ground state, several isotopes with high abundances, and two transitions that are accessible by lasers that can be used for laser cooling and trapping. Laser cooling with several different ground-state angular momenta can be studied by simply changing isotopes with little changes to the experimental parameters.All seven stable isotopes of ytterbium have been slowed from an atomic beam, trapped in a MOT using the strong 1S 0-1P1 line and transfered into a second MOT using the 1S0- 3P1 intercombination line. The apparatus developed for this experiment is described in detail, including the lasers used for both transitions at 399 nm and 556 nm. Trap properties such as temperature, spring constant, lifetime of the traps, and isotope dependence of cooling mechanisms in the 1S0- 3P1 trap were investigated. Doppler cooling was studied in even isotopes with no spin in the ground state. Sisyphus cooling in the ground state of odd isotopes of alkaline-earth-like atoms with zero electronic and non-zero nuclear angular momentum was demonstrated for the first time, and compared with numerical simulations. Future directions that exploit the unique features of ytterbium are also discussed.