Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2403.07021 · IEEE Access

State Estimation and Control for Stochastic Quantum Dynamics With Homodyne Measurement: Stabilizing Qubits Under Uncertainty

Nahid Binandeh Dehaghani, A. Pedro Aguiar, Rafał Wiśniewski

Published Jan 1, 2024• 2 citations
arXivHTMLPDF

Abstract

This paper introduces a Lyapunov-based control strategy alongside two filtering methods for controlling and estimating the evolution of coherence vector elements from sequential homodyne measurements. The methods include traditional quantum filtering and a novel extended Kalman filter, which explicitly addresses the dynamics of a stochastic master equation with correlated noise, thereby ensuring the quantum properties of the estimated state variable by design. We also explore scenarios where the system’s Hamiltonian is unknown, demonstrating that both filters exhibit reduced performance with increased estimation errors. To address this, we propose a multiple model estimation scheme applicable to either filter. The estimated density operator is then controlled using the proposed switching-based Lyapunov scheme, which guarantees noise-to-state practical stability in probability. We demonstrate the effectiveness of our approach in stabilizing a qubit coupled to a leaky cavity under homodyne detection, even with uncertainty in the resonance frequency.

DOI
10.1109/access.2024.3455170

Related papers

A quantum extended Kalman filter

Muhammad F. Emzir, Matthew J. Woolley, Ian R. Petersen

Abstract In quantum physics, a stochastic master equation (SME) estimates the state (density operator) of a quantum system in the Schrödinger picture based on a record of measurements made on the system. In the Heisenberg picture, the SME is a quantum filter. For a linear quantum system subject to linear measurements and Gaussian noise, the dynamics may be described by quantum stochastic differential equations (QSDEs), also known as quantum Langevin equations, and the quantum filter reduces to a so-called quantum Kalman filter. In this article, we introduce a quantum extended Kalman filter (quantum EKF), which applies a commutative approximation and a time-varying linearization to systems of nonlinear QSDEs. We will show that there are conditions under which a filter similar to a classical EKF can be implemented for quantum systems. The boundedness of estimation errors and the filtering problem with ‘state-dependent’ covariances for process and measurement noises are also discussed. We demonstrate the effectiveness of the quantum EKF by applying it to systems that involve multiple modes, nonlinear Hamiltonians, and simultaneous jump-diffusive measurements.

arXiv:1603.01890•Journal of Physics A Mathematical and Theoretical•Apr 21, 2017•31 citations

A Discrete Invitation to Quantum Filtering and Feedback Control

Luc Bouten, Ramon van Handel, M. R. James

The engineering and control of devices at the quantum mechanical level—such as those consisting of small numbers of atoms and photons—is a delicate business. The fundamental uncertainty that is inherently present at this scale manifests itself in the unavoidable presence of noise, making this a novel field of application for stochastic estimation and control theory. In this expository paper we demonstrate estimation and feedback control of quantum mechanical systems in what is essentially a noncommutative version of the binomial model that is popular in mathematical finance. The model is extremely rich and allows a full development of the theory while remaining completely within the setting of finite-dimensional Hilbert spaces (thus avoiding the technical complications of the continuous theory). We introduce discretized models of an atom in interaction with the electromagnetic field, obtain filtering equations for photon counting and homodyne detection, and solve a stochastic control problem using dynamic programming and Lyapunov function methods.

arXiv:math/0606118•SIAM Review•May 1, 2009•117 citations

Stabilization of Time-Varying Perturbed Quantum Systems via Reduced Filters

Weichao Liang, Daoyi Dong

In practical applications, quantum systems are inevitably subject to significant uncertainties, including unknown initial states, imprecise physical parameters, and unmodeled environmental noise, all of which pose major challenges to robust quantum feedback control. This paper proposes a feedback stabilization strategy based on a reduced quantum filter that achieves robustness against time-varying Hamiltonian perturbations and additional dissipative effects, without requiring prior knowledge of the initial state or exact system parameters. The proposed filter estimates only O(N) real variables corresponding to the diagonal elements of the system density matrix in a quantum non-demolition basis in contrast to the O(N^2) variables required by a full stochastic master equation, where N is the Hilbert space dimension. This dimensionality reduction substantially simplifies real-time computation and feedback implementation while preserving both convergence and robustness guarantees. Rigorous analysis further establishes global exponential stability of the target subspace. The results provide a scalable framework for robust and efficient measurement-based feedback control applicable to high-dimensional perturbed open quantum systems.

math-phCross-listedarXiv:2511.07949•Nov 12, 2025•3 citations

State and Parameter Estimation for Stochastic Open Two-Level Quantum Systems

Emilio Corcione, Cristina Tarín

Research in the field of quantum control usually assumes complete knowledge of the state and parameters. In this paper, a driven and damped two-level quantum system under continuous observation is considered. Its time evolution is governed by an operator-valued stochastic master equation and conditioned on the recorded measurement data. The system is transformed to state space representation and its observability is proven analytically. An extended Kalman filter is employed in order to both reconstruct the density operator describing the full state of the system, and to dynamically identify key parameters. Convincing results are obtained in numerical simulations. Overall, a practical engineering approach to quantum control is presented.

Proceedings of the ... American Control Conference/Proceedings of the American Control Conference•May 31, 2023•3 citations

Model-Free Quantum Stabilization via Finite-Difference Lyapunov Control

Robert Vrabel

We develop a model-free framework for stabilizing quantum states using only empirical finite-difference evaluations of a measurement-derived Lyapunov observable. The controller requires no knowledge of the Hamiltonian, dissipative structure, or generator of the dynamics, and relies solely on discrete measurement data. The approach combines three key elements: sign-based Lyapunov descent, adaptive gain amplification, and a finite-difference analogue of LaSalle's invariance principle. We provide rigorous conditions under which these mechanisms guarantee asymptotic stabilization along the sampling instants in the drift-free case and practical input-to-state stability (ISS) in the presence of unknown drift and noise. The resulting feedback law is simple, derivative-free, and experimentally feasible. A qubit example illustrates the complete closed-loop scheme and the predicted ISS-type behavior. Although demonstrated on a single qubit, the theory applies to arbitrary finite-dimensional quantum systems and offers a foundation for further developments in stochastic, subspace, and multi-qudit model-free quantum control.

quant-pharXiv:2604.10255•International Journal of Control•Apr 14, 2026•0 citations

Feedback control of quantum systems : modelling, stabilisation and estimation

Zibo Miao

Quantum engineering has seen rapid growth in the past two decades. Physicists, mathematicians and engineers have been working in unison to control a number of diverse systems in the quantum regime. Quantum control involving feedback has become particularly topical, as using information gained from a system can lead to more stable operation of a control protocol. Quantum feedback can be split into two paradigms: measurement based feedback and coherent feedback. Although it is increasingly evident that retaining the coherence of the feedback signal provides an intrinsic advantage over measurement-based feedback, coherent feedback is still a new paradigm. In particular, there are a limited number of options for coherently estimating a state within a feedback loop. As a step towards better understanding and implementation of quantum feedback, this thesis reports on modelling, estimation and control of quantum systems. The first topic is physical realisability of a variety of quantum systems, especially finite level systems and their outgrowths. Bilinear quantum stochastic differential equations (QSDEs) have to be employed to characterise these systems, which is a significant complement to the previous work on linear QSDEs. In light of the fact that direct and indirect couplings play a vital role in quantum network and control, we also provide state-space models for different classes of coupled open quantum systems incorporating both bidirectional and directional interactions. The second topic is coherent observers and optimal filtering. It is well established that classically estimation using the Kalman filter can provide improved performance over direct feedback schemes, and similar demonstrations have been performed for measurement-based quantum feedback. In this thesis I present coherent observers, including least mean squares estimators, which are driven by the coherent output of a specified quantum plant and designed such that some subset of the observer and plant's expectation values converge in the asymptotic limit. Not only can estimators "observe" mean quantities of quantum plant, but also they can "estimate" quantum correlations such as entanglement. This is of much importance to coherent feedback design in the absence of measurement steps without loss of fidelity. Last but not least, several topics regarding stabilisation and control design of quantum systems are discussed in my thesis. To be specific, tools for quantum stability analysis (e.g. Lyapunov conditions) are provided. Both measurement-based feedback and coherent feedback control design are taken into account. A measurement-based optimal controller for opto-mechanical systems aimed at synchronising different mechanical modes is presented, which is application-oriented. Moreover, A general observer-based coherent feedback control framework is studied, and I demonstrate a pole-placement approach via coherent observers that can be applied to various scenarios.

•Jan 1, 2015•0 citations
This paper introduces a Lyapunov-based control strategy alongside two filtering methods for controlling and estimating the evolution of coherence vector elements from sequential homodyne measurements. The methods include traditional quantum filtering and a novel extended Kalman filter, which explicitly addresses the dynamics of a stochastic master equation with correlated noise, thereby ensuring the quantum properties of the estimated state variable by design. We also explore scenarios where the system’s Hamiltonian is unknown, demonstrating that both filters exhibit reduced performance with increased estimation errors. To address this, we propose a multiple model estimation scheme applicable to either filter. The estimated density operator is then controlled using the proposed switching-based Lyapunov scheme, which guarantees noise-to-state practical stability in probability. We demonstrate the effectiveness of our approach in stabilizing a qubit coupled to a leaky cavity under homodyne detection, even with uncertainty in the resonance frequency.
Abstract In quantum physics, a stochastic master equation (SME) estimates the state (density operator) of a quantum system in the Schrödinger picture based on a record of measurements made on the system. In the Heisenberg picture, the SME is a quantum filter. For a linear quantum system subject to linear measurements and Gaussian noise, the dynamics may be described by quantum stochastic differential equations (QSDEs), also known as quantum Langevin equations, and the quantum filter reduces to a so-called quantum Kalman filter. In this article, we introduce a quantum extended Kalman filter (quantum EKF), which applies a commutative approximation and a time-varying linearization to systems of nonlinear QSDEs. We will show that there are conditions under which a filter similar to a classical EKF can be implemented for quantum systems. The boundedness of estimation errors and the filtering problem with ‘state-dependent’ covariances for process and measurement noises are also discussed. We demonstrate the effectiveness of the quantum EKF by applying it to systems that involve multiple modes, nonlinear Hamiltonians, and simultaneous jump-diffusive measurements.
The engineering and control of devices at the quantum mechanical level—such as those consisting of small numbers of atoms and photons—is a delicate business. The fundamental uncertainty that is inherently present at this scale manifests itself in the unavoidable presence of noise, making this a novel field of application for stochastic estimation and control theory. In this expository paper we demonstrate estimation and feedback control of quantum mechanical systems in what is essentially a noncommutative version of the binomial model that is popular in mathematical finance. The model is extremely rich and allows a full development of the theory while remaining completely within the setting of finite-dimensional Hilbert spaces (thus avoiding the technical complications of the continuous theory). We introduce discretized models of an atom in interaction with the electromagnetic field, obtain filtering equations for photon counting and homodyne detection, and solve a stochastic control problem using dynamic programming and Lyapunov function methods.
In practical applications, quantum systems are inevitably subject to significant uncertainties, including unknown initial states, imprecise physical parameters, and unmodeled environmental noise, all of which pose major challenges to robust quantum feedback control. This paper proposes a feedback stabilization strategy based on a reduced quantum filter that achieves robustness against time-varying Hamiltonian perturbations and additional dissipative effects, without requiring prior knowledge of the initial state or exact system parameters. The proposed filter estimates only O(N) real variables corresponding to the diagonal elements of the system density matrix in a quantum non-demolition basis in contrast to the O(N^2) variables required by a full stochastic master equation, where N is the Hilbert space dimension. This dimensionality reduction substantially simplifies real-time computation and feedback implementation while preserving both convergence and robustness guarantees. Rigorous analysis further establishes global exponential stability of the target subspace. The results provide a scalable framework for robust and efficient measurement-based feedback control applicable to high-dimensional perturbed open quantum systems.
Research in the field of quantum control usually assumes complete knowledge of the state and parameters. In this paper, a driven and damped two-level quantum system under continuous observation is considered. Its time evolution is governed by an operator-valued stochastic master equation and conditioned on the recorded measurement data. The system is transformed to state space representation and its observability is proven analytically. An extended Kalman filter is employed in order to both reconstruct the density operator describing the full state of the system, and to dynamically identify key parameters. Convincing results are obtained in numerical simulations. Overall, a practical engineering approach to quantum control is presented.
We develop a model-free framework for stabilizing quantum states using only empirical finite-difference evaluations of a measurement-derived Lyapunov observable. The controller requires no knowledge of the Hamiltonian, dissipative structure, or generator of the dynamics, and relies solely on discrete measurement data. The approach combines three key elements: sign-based Lyapunov descent, adaptive gain amplification, and a finite-difference analogue of LaSalle's invariance principle. We provide rigorous conditions under which these mechanisms guarantee asymptotic stabilization along the sampling instants in the drift-free case and practical input-to-state stability (ISS) in the presence of unknown drift and noise. The resulting feedback law is simple, derivative-free, and experimentally feasible. A qubit example illustrates the complete closed-loop scheme and the predicted ISS-type behavior. Although demonstrated on a single qubit, the theory applies to arbitrary finite-dimensional quantum systems and offers a foundation for further developments in stochastic, subspace, and multi-qudit model-free quantum control.
Quantum engineering has seen rapid growth in the past two decades. Physicists, mathematicians and engineers have been working in unison to control a number of diverse systems in the quantum regime. Quantum control involving feedback has become particularly topical, as using information gained from a system can lead to more stable operation of a control protocol. Quantum feedback can be split into two paradigms: measurement based feedback and coherent feedback. Although it is increasingly evident that retaining the coherence of the feedback signal provides an intrinsic advantage over measurement-based feedback, coherent feedback is still a new paradigm. In particular, there are a limited number of options for coherently estimating a state within a feedback loop. As a step towards better understanding and implementation of quantum feedback, this thesis reports on modelling, estimation and control of quantum systems. The first topic is physical realisability of a variety of quantum systems, especially finite level systems and their outgrowths. Bilinear quantum stochastic differential equations (QSDEs) have to be employed to characterise these systems, which is a significant complement to the previous work on linear QSDEs. In light of the fact that direct and indirect couplings play a vital role in quantum network and control, we also provide state-space models for different classes of coupled open quantum systems incorporating both bidirectional and directional interactions. The second topic is coherent observers and optimal filtering. It is well established that classically estimation using the Kalman filter can provide improved performance over direct feedback schemes, and similar demonstrations have been performed for measurement-based quantum feedback. In this thesis I present coherent observers, including least mean squares estimators, which are driven by the coherent output of a specified quantum plant and designed such that some subset of the observer and plant's expectation values converge in the asymptotic limit. Not only can estimators "observe" mean quantities of quantum plant, but also they can "estimate" quantum correlations such as entanglement. This is of much importance to coherent feedback design in the absence of measurement steps without loss of fidelity. Last but not least, several topics regarding stabilisation and control design of quantum systems are discussed in my thesis. To be specific, tools for quantum stability analysis (e.g. Lyapunov conditions) are provided. Both measurement-based feedback and coherent feedback control design are taken into account. A measurement-based optimal controller for opto-mechanical systems aimed at synchronising different mechanical modes is presented, which is application-oriented. Moreover, A general observer-based coherent feedback control framework is studied, and I demonstrate a pole-placement approach via coherent observers that can be applied to various scenarios.