While dephasing noise often hinders quantum devices, it can become an asset for quantum thermal machines. Here we demonstrate a three-level thermal machine that leverages noise-assisted quantum transport to enable steady-state cooling of microwave modes. The device exploits symmetry-selective couplings between a superconducting artificial molecule and two physical heat baths. Each bath consists of a microwave waveguide populated with synthesized quasithermal radiation. Energy transport is enabled by injecting dephasing noise through a third channel longitudinally coupled to one artificial atom of the molecule. By varying the effective temperatures of the reservoirs and measuring photonic heat currents with sub-attowatt resolution, we demonstrate energy flow dynamics characteristic of a quantum heat engine, thermal accelerator, and refrigerator. Our work constitutes an experimental demonstration of the key operating principles of a noise-assisted three-level quantum refrigerator and opens new avenues for experiments in quantum thermodynamics using superconducting circuits coupled to physical heat baths.
While dephasing noise often hinders quantum devices, it can become an asset for quantum thermal machines. Here we demonstrate a three-level thermal machine that leverages noise-assisted quantum transport to enable steady-state cooling of microwave modes. The device exploits symmetry-selective couplings between a superconducting artificial molecule and two physical heat baths. Each bath consists of a microwave waveguide populated with synthesized quasithermal radiation. Energy transport is enabled by injecting dephasing noise through a third channel longitudinally coupled to one artificial atom of the molecule. By varying the effective temperatures of the reservoirs and measuring photonic heat currents with sub-attowatt resolution, we demonstrate energy flow dynamics characteristic of a quantum heat engine, thermal accelerator, and refrigerator. Our work constitutes an experimental demonstration of the key operating principles of a noise-assisted three-level quantum refrigerator and opens new avenues for experiments in quantum thermodynamics using superconducting circuits coupled to physical heat baths.
Abstract Although classical thermal machines power industries and modern living, quantum thermal engines have yet to prove their utility. Here, we demonstrate a useful quantum absorption refrigerator formed from superconducting circuits. We use it to cool a transmon qubit to a temperature lower than that achievable with any one available bath, thereby resetting the qubit to an initial state suitable for quantum computing. The process is driven by a thermal gradient and is autonomous, requiring no external feedback. The refrigerator exploits an engineered three-body interaction between the target qubit and two auxiliary qudits. Each auxiliary qudit is coupled to a physical heat bath, realized with a microwave waveguide populated with synthesized quasithermal radiation. If the target qubit is initially fully excited, its effective temperature reaches a steady-state level of approximately 22 mK, lower than what can be achieved by existing state-of-the-art reset protocols. Our results demonstrate that superconducting circuits with propagating thermal fields can be used to experimentally explore quantum thermodynamics and apply it to quantum information-processing tasks.
We use a transmon qubit and its dispersively coupled readout resonator to measure the Fock state populations of another microwave resonator, to which we have attached a quantum-circuit refrigerator (QCR). First, we apply noise generated at room temperature to the resonator and show that such noise drive leads to a thermal distribution of the resonator Fock states. Subsequently, we detune the noise frequency band far away from the resonance condition and vary the power of the noise applied on the QCR. We observe that such artificial thermal noise may lead to major damping of a coherent state of the resonator. Importantly, we also demonstrate that the effective temperature of a thermal resonator state can be reduced from roughly 300 to 130 mK by the introduction of the artificial thermal noise. These observations pave the way for a purely thermally powered quantum-circuit refrigerator that may unlock the use of waste heat in resetting superconducting qubits in a quantum processor and in building autonomous quantum heat engines.
Precision in nonequilibrium processes comes at a thermodynamic cost: suppressing fluctuations generally requires increased dissipation. Thermodynamic uncertainty relations (TURs) make this trade-off quantitative by linking current fluctuations to entropy production in classical stochastic dynamics. In the decade since its discovery, the canonical steady-state TUR and its finite-time generalizations have become a cornerstone of non-equilibrium thermodynamics, constraining the performance of molecular machines and allowing heat dissipation to be inferred from observable fluctuations. Whether the canonical TUR can be violated in a controlled quantum device remains an outstanding experimental question, in part because doing so requires resolving extremely small steady-state currents as well as their fluctuations. Here we experimentally show that steady-state quantum transport can surpass the precision permitted by the canonical TUR. We observe this violation in a superconducting quantum thermal machine coupled to a microwave waveguide acting as a cold bath and to a classical noise source providing an effective infinite-temperature bath. We observe a TUR ratio Q=1.71±0.17, in violation of the classical bound Q≥2. Our results demonstrate a fundamental distinction between classical and quantum thermodynamics, paving the way for quantum thermal devices that achieve enhanced precision at reduced energy cost.
We observe the continuous emission of photons into a waveguide from a superconducting qubit without the application of an external drive. To explain this counterintuitive observation, we build a two-bath model where the qubit couples simultaneously to a cold bath (the waveguide) and a hot bath (a secondary environment). Our results show that the thermal-photon occupation of the hot bath is up to 0.14 photons, 35 times larger than the cold waveguide, leading to nonequilibrium heat transport with a power of up to 132 zW, as estimated from the qubit emission spectrum. By adding more isolation between the sample output and the first cold amplifier in the output line, the heat transport is strongly suppressed. Our interpretation is that the hot bath may arise from active two-level systems being excited by noise from the output line, and that the qubit coherence can be improved significantly by suppressing this noise. We also apply a coherent drive, and use the waveguide to measure thermodynamic work and heat, suggesting waveguide spectroscopy is a useful means to study quantum heat engines and refrigerators. Finally, based on the theoretical model, we propose how a similar setup can be used as a noise spectrometer which provides a solution for calibrating the background noise of hybrid quantum systems. Published by the American Physical Society 2022
Quantum thermodynamics supplies a consistent description of quantum heat engines and refrigerators up to a single few-level system coupled to the environment. Once the environment is split into three (a hot, cold, and work reservoir), a heat engine can operate. The device converts the positive gain into power, with the gain obtained from population inversion between the components of the device. Reversing the operation transforms the device into a quantum refrigerator. The quantum tricycle, a device connected by three external leads to three heat reservoirs, is used as a template for engines and refrigerators. The equation of motion for the heat currents and power can be derived from first principles. Only a global description of the coupling of the device to the reservoirs is consistent with the first and second laws of thermodynamics. Optimization of the devices leads to a balanced set of parameters in which the couplings to the three reservoirs are of the same order and the external driving field is in resonance. When analyzing refrigerators, one needs to devote special attention to a dynamical version of the third law of thermodynamics. Bounds on the rate of cooling when Tc→0 are obtained by optimizing the cooling current. All refrigerators as Tc→0 show universal behavior. The dynamical version of the third law imposes restrictions on the scaling as Tc→0 of the relaxation rate γc and heat capacity cV of the cold bath.
Superconducting circuits provide a controllable and versatile platform for studying quantum phenomena and advancing quantum technologies. Josephson junctions and resonators are the central circuit elements, as they enable the realization of macroscopic quantum systems—such as qubits—that can be conveniently controlled, probed, and integrated with non-superconducting components. The implementation of a thermal reservoir through the integration of a dissipative element, such as a normal-metal resistor, offers an experimental platform for investigating quantum thermodynamics, heat management in circuits, on-chip thermal detectors, and the realization of quantum thermal machines. In this thesis, we integrate a mesoscopic normal metal and its associated thermometers as an on-chip bolometer within circuit quantum electrodynamics devices for thermal detection and quantum thermodynamics experiments. The on-chip bolometer is utilized as a sensitive and broadband thermal spectrometer to characterize the properties of a superconducting resonator and to investigate its dominant loss channels. We demonstrate the capability of our thermal detector to resolve the resonator modes over a wide frequency range extending above 20 GHz. When two thermal baths are connected through a qubit–resonator system, a quantum heat valve can be realized. This device has been demonstrated using both transmon and flux qubits. Photonic heat transport between the two baths is controlled by tuning the qubit energy via an applied static magnetic field. To model these experiments, we propose an approach based on electromagnetic simulation and microwave circuit theory, restricted to the linear-response regime. Despite this limitation, the method successfully captures the experimental observations and provides a practical tool for analysing and designing circuits for future experiments. A periodically driven qubit coupled to two unequal resonators, each terminated by a heat reservoir, enables the realization of a quantum Otto refrigerator. The use of a transmon qubit for this purpose is limited by its weak anharmonicity. We therefore explore alternative platforms for the experimental implementation of a quantum refrigerator based on charge and flux qubits, which exhibit strong anharmonicity. As an important step, we perform experiments on a driven flux qubit galvanically coupled to a resonator that is, in turn, weakly capacitively coupled to a heat reservoir. We observe interference patterns in the heat current arising from driving-induced coherence. In particular, resonance peaks in the heat transferred to the bath appear at driving frequencies that are integer fractions of the resonator frequency. These quantum features are governed by the relative phase accumulated by the qubit states under driving.