Electron spins in semiconductor devices are highly promising building blocks for quantum processors (QPs). Commercial semiconductor foundries can create QPs using the same processes used for conventional chips, once the QP design is suitably specified. There is a vast accessible design space; to identify the most promising options for fabrication, one requires predictive modeling of interacting electrons in real geometries and complex nonideal environments. In this work we explore a modeling method based on real-space grids, an approach without assumptions relating to device topology and therefore with wide applicability. Given an electrode geometry, we determine the exchange coupling between quantum dot qubits, and model the full evolution of a SWAP gate to predict qubit loss and infidelity rates for various voltage profiles. We determine full, three-dimensional solutions and introduce a method that can obtain near-identical predictions using far more efficient two-dimensional computations. Moreover we explore the impact of unwanted charge defects (static and dynamic) in the environment, and test robust pulse sequences. As an example we exhibit a sequence correcting both systematic errors and (unknown) charge defects, observing an order of magnitude boost in fidelity. The technique can thus identify the most promising device designs for fabrication, as well as bespoke control sequences for each such device.
Electron spins in semiconductor devices are highly promising building blocks for quantum processors (QPs). Commercial semiconductor foundries can create QPs using the same processes used for conventional chips, once the QP design is suitably specified. There is a vast accessible design space; to identify the most promising options for fabrication, one requires predictive modeling of interacting electrons in real geometries and complex nonideal environments. In this work we explore a modeling method based on real-space grids, an approach without assumptions relating to device topology and therefore with wide applicability. Given an electrode geometry, we determine the exchange coupling between quantum dot qubits, and model the full evolution of a SWAP gate to predict qubit loss and infidelity rates for various voltage profiles. We determine full, three-dimensional solutions and introduce a method that can obtain near-identical predictions using far more efficient two-dimensional computations. Moreover we explore the impact of unwanted charge defects (static and dynamic) in the environment, and test robust pulse sequences. As an example we exhibit a sequence correcting both systematic errors and (unknown) charge defects, observing an order of magnitude boost in fidelity. The technique can thus identify the most promising device designs for fabrication, as well as bespoke control sequences for each such device.
The spin of an electron confined in semiconductor quantum dots is currently a promising candidate for quantum bit (qubit) implementations. Taking advantage of the existing CMOS integration technologies, such devices can offer a platform for large scale quantum computation. However, a quantum mechanical framework bridging a device's physical design and operational parameters to the qubit's energy space is lacking. Furthermore, the spin to charge coupling introduced by intrinsic or induced spin-orbit interaction (SOI) exposes the qubits to charge noise compromising their coherence properties and inducing quantum gate errors. We present here a comodeling framework for double quantum dot (DQD) devices and their charge noise environments. We use a combination of an electrostatic potential solver, full configuration interaction quantum mechanical methods, and two-level-fluctuator models to study the quantum gate performance in realistic device designs and operation conditions. We utilize the developed models together alongside the single electron solutions of the quantum dots to simulate one- and two-qubit gates in the presence of charge noise. We find an inverse correlation between quantum gate errors and quantum dot confinement frequencies. We calculate X-gate fidelities >97 in the simulated Si-MOS devices at a typical TLF density of ${10}^{11}\phantom{\rule{4pt}{0ex}}{\mathrm{cm}}^{\ensuremath{-}2}$. We also find that exchange driven two-qubit SWAP gates show higher sensitivity to charge noise with fidelities down to 91 in the presence of the same density of TLFs. We further investigate the one- and two-qubit gate fidelities at different TLF densities. We find that given the small size of the quantum dots, sensitivity of a quantum gate to the distance between the noise sources and the quantum dot creates a strong variability in the quantum gate fidelities, which can compromise the device yields in scaled qubit technologies.
Quantum computers offer a route to outperform classical methods in tasks such as molecular simulation, motivating hybrid algorithms like the Variational Quantum Eigensolver (VQE) for near-term devices. Silicon spin qubits are a promising platform for scalable quantum computation, but their performance is limited by hardware imperfections -- most notably charge-noise-induced potential fluctuations and static miscalibration of gate-electrode voltages -- which degrade quantum gate fidelities and, ultimately, algorithmic accuracy. Here we develop a hardware-algorithm co-simulation framework for silicon quantum-dot processors that links 3D electrostatics to effective g-factors and exchange couplings, and propagates voltage-level noise through realistic control pulses. Using VQE for H2 ground-state energy estimation as a circuit-level testbed, we study both static scaling/offset errors on the gate-electrode voltages and stochastic fluctuations modeled as random-telegraph noise with tunable amplitudes and switching times. At the gate level, we show that exchange-based two-qubit gates are roughly an order of magnitude more sensitive to these types of noise than ESR-driven single-qubit rotations. Quantum process tomography and Kraus-operator analysis further distinguish coherent and incoherent contributions and quantify the fraction of error that is, in principle, correctable by a compensating unitary. Embedding these noise models into the VQE circuit, we identify regimes of miscalibration strength and noise switching time compatible with chemically accurate energy estimates, and discuss how statistical post-processing based on the full distribution of noisy energy estimates could further improve accuracy.
The growing interest in quantum computers has triggered various approaches for the realization of a large-scale quantum processor that can eventually outperform classical high-performance computers. Quantum computers are attracting increasing attention for their potential to enormously accelerate the simulation of quantum systems and the solution of optimization problems, promising an immense impact, particularly in fields such as chemistry, medicine, and cybersecurity. Although it is still a long way to a practical quantum device, the progress over the last decades has shown encouraging results for a so far limited number of quantum bits, or qubits for short, which represent the computational units of the processor. One promising platform for the implementation of qubits is the spin of charge carriers in semiconductor quantum dots. Especially the use of purified silicon as a host material has significantly improved the performance of quantum operations. Advanced fabrication techniques from the established semiconductor industry in principle allow for the manufacturing of a large number of qubits on a small chip, making them specifically competitive from the perspective of scalability. In this thesis, we investigate challenges for electron spin qubits, particularly in the context of scaling to large qubit arrays for quantum computation. We evaluate the performance of quantum gates, present error mitigation strategies, and propose new quantum operations for two particular spin qubit implementations. In a dense array of Loss-DiVincenzo spin qubits on a chip, quantum information can be electrically controlled by microwave pulses. For neighboring qubits, capacitive couplings of nearby electrodes lead to crosstalk that affects the quantum computation. The first examination in this thesis addresses the effect of crosstalk on idling and operating spin qubits due to an interfering microwave drive. After the analysis and characterization of the performance, we suggest mitigation protocols for different constellations of important quantum gates, which can be easily implemented experimentally. We further show how to reduce crosstalk in a two-qubit gate using an asymmetric driving scheme, resulting in an enormous improvement of the gate performance, and may be used to generally overcome the obstacle of crosstalk. An additional source of errors in spin qubit registers originates from the finite residual exchange interaction between neighboring qubits. It arises due to a finite overlap of the electron wave functions and is caused by the limited speed at which the applied voltages can be controlled. We evaluate the fidelity of doing quantum operations under these circumstances with a varying number of neighboring qubits and present robust mitigation schemes with a decent performance also in the presence of noise. Besides crosstalk, another crucial observation in experiments using microwaves is the heating caused by the delivery of high-power radio frequency pulses to the quantum chip and results in a change of the qubit properties. We therefore investigate the impact of phonons on the energy levels in spin qubits to identify a temperature-dependent correction to the qubit state splitting. As microwave pulses are associated with potential errors, exchange-only qubits represent a promising alternative to achieve universal quantum computation only using baseband control. Therefore, we shift our focus towards exchange-only qubits and outline the main error sources in these systems, including residual exchange interactions between spins, charge noise from the applied voltages, and magnetic fluctuations in the material. A consequential complication of this implementation is that the quantum information can leak out of the qubit states. This effect, however, can be reduced in the presence of a finite magnetic field, as we will demonstrate in this thesis. The gate construction for exchange-only qubits usually requires more pulse steps than in the previous qubit type. Nevertheless, if exchange interactions are switched on simultaneously, this can result in faster quantum gates, as we demonstrate in this thesis. Especially the discovery of a quantum operation that introduces relative phases between computational and leakage states can be of interest for the construction of two-qubit gates and will be discussed in an example for a special operation space.
Since the mid-20th century it has been understood that a general-purpose quan- tum computer would be able to efficiently solve problems that will forever be out-of-reach for conventional computers. Since then, many quantum algorithms have been developed with applications in a wide range of domains including cryptography, simulations, machine learning and data analysis. While this has resulted in substantial attention being paid to the development of quantum com- puters, the best architectures to use in their fabrication is not yet clear. Semiconductor quantum dot devices are a particularly promising candidate for use in quantum computing architectures, as it is anticipated that once the funda- mental building blocks are implemented, they might be massively scalable using the existing lithography techniques of the semiconductor industry. So far, how- ever, it is not yet clear how best to implement the high-fidelity gates required for general-purpose quantum computation. In this thesis, we present and characterise novel theoretical proposals for fast, simple and high-fidelity two-qubit gates using magnetic (exchange) coupling for specific semiconductor quantum dot qubits; namely, the singlet-triplet and resonant-exchange qubits. These two-qubit operations are simple enough that it is feasible for them to be implemented in experiments of the near future. Success- ful implementations would significantly extend the experimentally demonstrable frontier of semi-conductor quantum dot devices as relevant to their use in uni- versal quantum computing architectures. We also develop simple parameter estimation schemes by which it is possible to substantially mitigate the dominant sources of error for our proposed gates; namely, low-frequency charge and magnetic noise. We develop the techniques in the context of pseudo-static magnetic field gradient fluctuations in singlet- triplet qubits, and demonstrate that these techniques lead to a several orders of magnitude improvement in single-qubit coherence times. With minimal effort this could be ported to other qubit architectures.
We report on our recent progress in applying semiconductor quantum dots for spin-based quantum computation, as proposed by Loss and DiVincenzo (1998 Phys. Rev. A 57 120). For the purpose of single-electron spin resonance, we study different types of single quantum dot devices that are designed for the generation of a local ac magnetic field in the vicinity of the dot. We observe photon-assisted tunnelling as well as pumping due to the ac voltage induced by the ac current driven through a wire in the vicinity of the dot, but no evidence for ESR so far. Analogue concepts for a double quantum dot and the hydrogen molecule are discussed in detail. Our experimental results in laterally coupled vertical double quantum dot device show that the Heitler–London model forms a good approximation of the two-electron wavefunction. The exchange coupling constant J is estimated. The relevance of this system for two-qubit gates, in particular the SWAP operation, is discussed. Density functional calculations reveal the importance of the gate electrode geometry in lateral quantum dots for the tunability of J in realistic two-qubit gates.
Arrays of quantum dots (QDs) are a promising candidate system to realize scalable, coupled qubit systems and serve as a fundamental building block for quantum computers. In such semiconductor quantum systems, devices now have tens of individual electrostatic and dynamical voltages that must be carefully set to localize the system into the single-electron regime and to realize good qubit operational performance. The mapping of requisite QD locations and charges to gate voltages presents a challenging classical control problem. With an increasing number of QD qubits, the relevant parameter space grows sufficiently to make heuristic control unfeasible. In recent years, there has been considerable effort to automate device control that combines script-based algorithms with machine learning (ML) techniques. In this Colloquium, a comprehensive overview of the recent progress in the automation of QD device control is presented, with a particular emphasis on silicon- and GaAs-based QDs formed in two-dimensional electron gases. Combining physics-based modeling with modern numerical optimization and ML has proven effective in yielding efficient, scalable control. Further integration of theoretical, computational, and experimental efforts with computer science and ML holds vast potential in advancing semiconductor and other platforms for quantum computing.