Despite the high measurement fidelity that can now be reached, the dispersive qubit readout of circuit quantum electrodynamics is plagued by a loss of its quantum nondemolition character and a decrease in fidelity with increased measurement strength. In this work, we elucidate the nature of this dynamical process, which we refer to as transmon ionization. We develop a comprehensive framework which provides a physical picture of the origin of transmon ionization. This framework consists of three complementary levels of descriptions: a fully quantized transmon-resonator model, a semiclassical model where the resonator is treated as a classical drive on the transmon, and a fully classical model. Crucially, all three approaches preserve the full cosine potential of the transmon and lead to similar predictions. This framework identifies the multiphoton resonances responsible for transmon ionization. It also allows one to efficiently compute numerical estimates of the photon number threshold for ionization, which are in remarkable agreement with recent experimental results. The tools developed within this work are both conceptually and computationally simple, and we expect them to become an integral part of the theoretical underpinning of all circuit QED experiments. Published by the American Physical Society 2024
Despite the high measurement fidelity that can now be reached, the dispersive qubit readout of circuit quantum electrodynamics is plagued by a loss of its quantum nondemolition character and a decrease in fidelity with increased measurement strength. In this work, we elucidate the nature of this dynamical process, which we refer to as transmon ionization. We develop a comprehensive framework which provides a physical picture of the origin of transmon ionization. This framework consists of three complementary levels of descriptions: a fully quantized transmon-resonator model, a semiclassical model where the resonator is treated as a classical drive on the transmon, and a fully classical model. Crucially, all three approaches preserve the full cosine potential of the transmon and lead to similar predictions. This framework identifies the multiphoton resonances responsible for transmon ionization. It also allows one to efficiently compute numerical estimates of the photon number threshold for ionization, which are in remarkable agreement with recent experimental results. The tools developed within this work are both conceptually and computationally simple, and we expect them to become an integral part of the theoretical underpinning of all circuit QED experiments. Published by the American Physical Society 2024
The fidelity and quantum nondemolition character of the dispersive readout in circuit QED are limited by unwanted transitions to highly excited states at specific photon numbers in the readout resonator. This observation can be explained by multiphoton resonances between computational states and highly excited states in strongly driven nonlinear systems, analogous to multiphoton ionization in atoms and molecules. In this work, we utilize the multilevel nature of high- E J / E C transmons to probe the excited-state dynamics induced by strong drives during readout. With up to ten resolvable states, we quantify the critical photon number of ionization, the resulting state after ionization, and the fraction of the population transferred to highly excited states. Moreover, using pulse shaping to control the photon number in the readout resonator in the high-power regime, we tune the adiabaticity of the transition and verify that transmon ionization is a Landau-Zener-type transition. We further extend these methods to a typical transmon with E J / E C ≈ 55 and probe the offset-charge dependence of ionization dynamics in a timed-resolved manner. Our experimental results agree well with the theoretical prediction from a semiclassical driven transmon model and may guide future exploration of strongly driven nonlinear oscillators.
Qubit measurement is an essential step in any quantum computation. In circuit quantum electrodynamics, a leading quantum computer architecture, qubit readout is commonly one of the longest and lowest-fidelity processes. The authors numerically explore the dynamics of a driven transmon-resonator system under strong, nearly resonant measurement drives to better understand this issue. They find clear signs of transmon ``ionization'', in which the qubit escapes its confining potential under the influence of the drive, and semiclassical methods then reveal the mechanism. This approach can be used to optimize circuit parameters, suppress these spurious effects, and increase readout fidelity.
Dispersive readout of the transmon qubit in circuit QED is known to lose its quantum non-demolition character at small to moderate measurement drive amplitudes. This phenomenon is understood to originate from Laundau-Zener transitions at accidental multi-photon resonances, where n drive photons can promote the transmon by m levels. This interpretation has been shown to be in agreement with experiments characterizing the dispersive readout of a single transmon. The impact of these measurement-induced state transition (MIST) of a transmon embedded in a multi-qubit chip, however, remains largely unexplored. Here, we show that the presence of other components, such as qubits and couplers, can affect the MIST threshold of a measured transmon. To arrive at these results, we present a general method to characterize measurement-induced transition when the qubit under readout is coupled to other circuit elements, a ubiquitous situation in circuit QED-based quantum processors. As an example, we consider the case of two transmon qubits, and we show that the spectator qubit can be impacted by the measurement-induced transition of the readout qubit and, conversely, that the presence of the spectator qubit can lower the MIST threshold of the readout qubit. Finally, we explore how adding a coupler mode between the two qubits further modifies these effects.
A key challenge in achieving scalable fault tolerance in superconducting quantum processors is readout fidelity, which lags behind one- and two-qubit gate fidelity. A major limitation in improving qubit readout is measurement-induced transitions, also referred to as qubit ionization, caused by multiphoton qubit-resonator excitation occurring at specific photon numbers. Since ionization can involve highly excited states, it has been predicted that in transmons-the most widely used superconducting qubit-the photon number at which measurement-induced transitions occur is gate-charge dependent. This dependence is expected to persist deep in the transmon regime where the qubit frequency is gate-charge insensitive. We experimentally confirm this prediction by characterizing measurement-induced transitions with increasing resonator photon population while actively calibrating the transmon's gate charge. Furthermore, because highly excited states are involved, achieving quantitative agreement between theory and experiment requires accounting for higher-order harmonics in the transmon Hamiltonian.
Multiphoton processes deteriorate the quantum nondemolition (QND) character of the dispersive readout in circuit QED, causing the readout to lag behind single- and two-qubit gates in both speed and fidelity. Alternative methods such as longitudinal readout have been proposed; however, it is unknown to what extent multiphoton processes hinder this approach. Here, we investigate the QND character of the longitudinal readout of the transmon qubit. We show that the deleterious effects that arise due to multiphoton transitions can be heavily suppressed with detuning because the longitudinal interaction strength is independent of the transmon-resonator detuning. We consider the effect of circuit disorder, the selection rules that act on the transmon, and the description of longitudinal readout in the classical limit of the transmon to qualitatively demonstrate that longitudinal readout is robust. We show that fast, high-fidelity QND readout of transmon qubits is possible with longitudinal coupling.
Mesures quantiques utilisant une molécule artificielle supraconductrice en électrodynamiques quantique des circuits En circuit-QED, la technique la plus usuelle pour lire l'état d'un qubit est d'utiliser le couplage transverse entre le qubit et une cavité micro-onde dans la limite dispersive. Cependant, malgré d'importants progrès au cours de cette décennie, obtenir une lecture rapide, en un seul coup et hautement fidèle d'un qubit reste un défi majeur. En effet, la distinction de l'état d'un qubit est limitée par le compromis entre vitesse d'acquisition et précision. Cette limite a pour origine le couplage transverse qui impose deux importantes contraintes expérimentales : premièrement, augmenter les interactions pour lire plus rapidement restreint la durée de vie du qubit via l'effet Purcell. La seconde contrainte est sur la force du signal, qui est limitée pour éviter des transitions non voulues et induites par la mesure. Par conséquent, le défi expérimental à relever avec le couplage transverse est d'acquérir un signal faible en un temps court...Pour surmonter ces limitations, nous voulons changer de paradigme en introduisant un nouveau schéma de lecture qui se base sur un couplage cross-Kerr direct. Ce schéma est obtenu grâce à une molécule artificielle supraconductrice couplée à une cavité micro-onde 3D. La molécule est construite en couplant inductivement deux atomes transmons supraconducteurs. Elle manifeste alors deux modes propres : le mode symétrique qubit transmon et le mode antisymétrique ancilla. En insérant cette molécule dans la cavité de manière optimale, une hybridation transverse entre l'ancilla et la cavité conduit à deux résonateurs faiblement anharmoniques, appelés polaritons. Ces derniers possèdent un couplage cross-Kerr direct et large avec le qubit transmon. En mesurant le signal micro-onde transmis par un polariton, l'état du qubit peut être résolu.Théoriquement, dans ce nouveau paradigme, le qubit est immunisé contre les limitations du couplage transverse tel que l'effet Purcell. Cependant, pour les deux échantillons étudiés, un couplage transverse résiduel existe à cause d'imperfections expérimentales. Même faible, il limite pour l'instant la durée de vie du qubit et nos performances de lecture. Malgré cela, nous avons obtenu une lecture du qubit en un seul coup avec une fidélité allant jusqu'à 97.2 % en 500 ns par une mesure dite de verrouillage grâce à la non-linéarité du polariton. Dans une limite linéaire à faible nombre de photons, nous démontrons une fidélité atteignant 94.7 % en seulement 50 ns de lecture grâce à l'ajout d'un amplificateur paramétrique Josephson. Dans ce régime, les sauts quantiques sont résolus et le qubit est lu de manière non-destructive 99.2 % du temps.