Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2402.00852

Two-stroke thermal machine using spin squeezing operation

Carlos H. S. Vieira, Jonas F. G. Santos

Published Feb 1, 2024• 0 citations
arXivHTMLPDF

Abstract

Quantum thermal machines are powerful platforms for investigating how quantum effects impact the energy flow between different systems. Here, we investigate a two-stroke cycle in which spin-squeezing effects are intrinsically switched on during the entire operation time. By using Kitagawa and Ueda's parameter and the l1-norm to compute the degree of spin squeezing and the quantum coherence, we first show that the greater the spin squeezing effect, the greater the amount of coherence in the energy basis. Then, we investigate the engine performance given the amount of spin squeezing into the system. Our results show that even assuming an always-on spin squeezing, which is directly associated with the amount of entropy production in the cycle, it is possible to find a better set of efficiency and extracted power for the engine provided a high level of control over the relevant parameters, i.e., the operation time and the squeezing intensity.

DOI
10.48550/arxiv.2402.00852

Related papers

Entropy Production in Quantum Heat Engines with Squeezed Reservoirs

Pavol Berger, Natalia Zizka, Andrej Molnar

Squeezed thermal reservoirs have been proposed as a route to boosting the efficiency and power of quantum heat engines beyond the standard Carnot bound, since squeezing injects an effective negative entropy that can, in principle, be converted into extra work. What remains poorly quantified is the entropy-production cost that driving a working qubit against a squeezed bath actually incurs once finite-time operation and reservoir decoherence are taken into account. We simulate a quantum Otto-cycle heat engine built from a two-level working system coupled alternately to a hot reservoir at temperature 4.2 K, squeezed with squeezing parameter r ranging from 0 to 1.2, and an unsqueezed cold reservoir at 0.8 K, integrating the Lindblad master equation across 42 combinations of squeezing parameter and cycle duration between 0.05 and 2.0 (in units of the inverse qubit gap). At r = 0, mean entropy production per cycle was 0.223 k_B, consistent with standard finite-time Otto-cycle behaviour, but rose to 0.361 k_B at r = 1.2, a 62% increase, even as extractable work per cycle increased by 41%, from 0.184 to 0.259 (in units of the qubit gap). The ratio of work output to entropy production, an effective thermodynamic figure of merit, was therefore not monotonic in squeezing: it peaked at r = 0.6, where work per unit entropy produced reached 0.98, 15% above the unsqueezed value of 0.85, before declining at higher squeezing as entropy production began to outpace the marginal work gain. Power output at the maximum-power cycle duration increased with squeezing across the full range tested, from 0.31 (gap units) at r = 0 to 0.52 at r = 1.2, a 68% gain, but efficiency at maximum power fell from 0.41 to 0.33 over the same range, a trade-off traced out in detail in Table 1. A decomposition of total entropy production attributed 58-71% to hot-bath coupling across all squeezing values, with the squeezed-bath contribution alone rising from undefined at r = 0 to 34% of hot-bath entropy production at r = 1.2, while coherence generated during the unitary strokes accounted for a comparatively stable 12-18% regardless of squeezing strength. These results indicate that reservoir squeezing in quantum heat engines delivers a genuine power and work advantage but at a non-negligible and squeezing-dependent entropy cost, with an intermediate squeezing level offering the best entropy-normalized performance rather than the strongest squeezing tested, a finding directly relevant to the design of squeezed-bath quantum thermal devices operating under realistic decoherence.

•Jun 15, 2026•0 citations

Finite-time quantum Otto engine with a squeezed thermal bath: Role of quantum coherence and squeezing in the performance and fluctuations

Xiao Ping Yang, Dehua Liu, Jizhou He +2 more

We consider a finite-time quantum Otto heat engine that consists of two isochoric (thermal-contact) process, where the system is alternatively coupled to a hot squeezed and a cold thermal reservoir, and two unitary driven strokes, where the system is isolated from these two baths and its von Neumann entropy keeps constant. Both quantum inner friction and coherence are generated along the driven stroke and coherence cannot be fully erased after the finite-time hot isochore. Using full counting statistics, we present the probability distribution functions of heat injection and total work per cycle, which are dependent on the time duration along each process. With these, we derive the analytical expressions for the thermodynamic quantities of the two-level heat engine, such as total work, thermodynamic efficiency, entropy production, and work fluctuations, in which effects of coherence, squeezing, inner friction and finite-time heat exchange are included. We then numerically determine the thermodynamic quantities and the fluctuations using the parameters employed in the experimental implementation. Our results clarify the role of coherence and squeezing in the performance and fluctuations in the quantum Otto engines.

arXiv:2205.13290•May 26, 2022•6 citations

Power maximization of two-stroke quantum thermal machines

Nicolò Piccione, Gabriele De Chiara, Bruno Bellomo

We present a detailed study of quantum thermal machines employing quantum systems as working substances. In particular, we study two different types of two-stroke cycles where two collections of identical quantum systems with evenly spaced energy levels are initially prepared at thermal equilibrium by putting them in contact with a cold and a hot thermal bath, respectively. The two cycles differ in the absence or the presence of a mediator system, while, in both cases, nonresonant exchange Hamiltonians are exploited as particle interactions. We show that the efficiencies of these machines depend only on the energy gaps of the systems composing the collections and are equal to the efficiency of ``equivalent'' Otto cycles. Focusing on the cases of qubits or harmonic oscillators for both models, we maximize the engine power and analyze, in the model without the mediator, the role of the waiting time between subsequent interactions. It turns out that the case with the mediator can bring performance advantages when the interaction times are comparable with the waiting time of the correspondent cycle without the mediator. We find that in both cycles, the power peaks of qubit systems can surpass the Curzon-Ahlborn efficiency. Finally, we compare our cycle without the mediator with previous schemes of the quantum Otto cycle showing that high coupling is not required to achieve the same maximum power.

arXiv:2010.03489•Physical Review A•Mar 12, 2021•29 citations

Experimental Characterization of a Spin Quantum Heat Engine

John P. S. Peterson, Tiago B. Batalhão, Marcela Herrera +4 more

Developments in the thermodynamics of small quantum systems envisage nonclassical thermal machines. In this scenario, energy fluctuations play a relevant role in the description of irreversibility. We experimentally implement a quantum heat engine based on a spin-1/2 system and nuclear magnetic resonance techniques. Irreversibility at a microscope scale is fully characterized by the assessment of energy fluctuations associated with the work and heat flows. We also investigate the efficiency lag related to the entropy production at finite time. The implemented heat engine operates in a regime where both thermal and quantum fluctuations (associated with transitions among the instantaneous energy eigenstates) are relevant to its description. Performing a quantum Otto cycle at maximum power, the proof-of-concept quantum heat engine is able to reach an efficiency for work extraction (η≈42%) very close to its thermodynamic limit (η=44%).

arXiv:1803.06021•Physical Review Letters•Dec 9, 2019•395 citations

Maximally efficient quantum thermal machines fueled by nonequilibrium steady states

Tiago F. F. Santos, Francesco Tacchino, Dario Gerace +2 more

The concept of thermal machines has evolved from the canonical steam engine to the recently proposed nanoscopic quantum systems as working fluids. The latter obey quantum open system dynamics and frequently operate in nonequilibrium conditions. However, the role of this dynamics in the overall performance of quantum heat engines remains an open problem. Here we analyze and optimize the efficiency and power output of two-stage quantum heat engines fueled by nonequilibrium steady states. In a charging first stage, the quantum working fluid consisting of a qutrit or two coupled qubits is connected to two reservoirs at different temperatures, which establish a heat current that stores ergotropy in the system; the second stage comprises a coherent driving force that extracts work from the machine in finite a amount of time; finally, the external drive is switched off and the machine enters a new cycle.

arXiv:2103.09723•Physical Review A•Jun 29, 2021•8 citations

Thermodynamics of Minimal Coupling Quantum Heat Engines

Marcin Łobejko, Paweł Mazurek, Michał Horodecki

The minimal-coupling quantum heat engine is a thermal machine consisting of an explicit energy storage system, heat baths, and a working body, which alternatively couples to subsystems through discrete strokes --- energy-conserving two-body quantum operations. Within this paradigm, we present a general framework of quantum thermodynamics, where a work extraction process is fundamentally limited by a flow of non-passive energy (ergotropy), while energy dissipation is expressed through a flow of passive energy. It turns out that small dimensionality of the working body and a restriction only to two-body operations make the engine fundamentally irreversible. Our main result is finding the optimal efficiency and work production per cycle within the whole class of irreversible minimal-coupling engines composed of three strokes and with the two-level working body, where we take into account all possible quantum correlations between the working body and the battery. One of the key new tools is the introduced ``control-marginal state" --- one which acts only on a working body Hilbert space, but encapsulates all features regarding work extraction of the total working body-battery system. In addition, we propose a generalization of the many-stroke engine, and we analyze efficiency vs extracted work trade-offs, as well as work fluctuations after many cycles of the running of the engine.

arXiv:2003.05788•Quantum•Dec 23, 2020•26 citations
Quantum thermal machines are powerful platforms for investigating how quantum effects impact the energy flow between different systems. Here, we investigate a two-stroke cycle in which spin-squeezing effects are intrinsically switched on during the entire operation time. By using Kitagawa and Ueda's parameter and the l1-norm to compute the degree of spin squeezing and the quantum coherence, we first show that the greater the spin squeezing effect, the greater the amount of coherence in the energy basis. Then, we investigate the engine performance given the amount of spin squeezing into the system. Our results show that even assuming an always-on spin squeezing, which is directly associated with the amount of entropy production in the cycle, it is possible to find a better set of efficiency and extracted power for the engine provided a high level of control over the relevant parameters, i.e., the operation time and the squeezing intensity.
Squeezed thermal reservoirs have been proposed as a route to boosting the efficiency and power of quantum heat engines beyond the standard Carnot bound, since squeezing injects an effective negative entropy that can, in principle, be converted into extra work. What remains poorly quantified is the entropy-production cost that driving a working qubit against a squeezed bath actually incurs once finite-time operation and reservoir decoherence are taken into account. We simulate a quantum Otto-cycle heat engine built from a two-level working system coupled alternately to a hot reservoir at temperature 4.2 K, squeezed with squeezing parameter r ranging from 0 to 1.2, and an unsqueezed cold reservoir at 0.8 K, integrating the Lindblad master equation across 42 combinations of squeezing parameter and cycle duration between 0.05 and 2.0 (in units of the inverse qubit gap). At r = 0, mean entropy production per cycle was 0.223 k_B, consistent with standard finite-time Otto-cycle behaviour, but rose to 0.361 k_B at r = 1.2, a 62% increase, even as extractable work per cycle increased by 41%, from 0.184 to 0.259 (in units of the qubit gap). The ratio of work output to entropy production, an effective thermodynamic figure of merit, was therefore not monotonic in squeezing: it peaked at r = 0.6, where work per unit entropy produced reached 0.98, 15% above the unsqueezed value of 0.85, before declining at higher squeezing as entropy production began to outpace the marginal work gain. Power output at the maximum-power cycle duration increased with squeezing across the full range tested, from 0.31 (gap units) at r = 0 to 0.52 at r = 1.2, a 68% gain, but efficiency at maximum power fell from 0.41 to 0.33 over the same range, a trade-off traced out in detail in Table 1. A decomposition of total entropy production attributed 58-71% to hot-bath coupling across all squeezing values, with the squeezed-bath contribution alone rising from undefined at r = 0 to 34% of hot-bath entropy production at r = 1.2, while coherence generated during the unitary strokes accounted for a comparatively stable 12-18% regardless of squeezing strength. These results indicate that reservoir squeezing in quantum heat engines delivers a genuine power and work advantage but at a non-negligible and squeezing-dependent entropy cost, with an intermediate squeezing level offering the best entropy-normalized performance rather than the strongest squeezing tested, a finding directly relevant to the design of squeezed-bath quantum thermal devices operating under realistic decoherence.
We consider a finite-time quantum Otto heat engine that consists of two isochoric (thermal-contact) process, where the system is alternatively coupled to a hot squeezed and a cold thermal reservoir, and two unitary driven strokes, where the system is isolated from these two baths and its von Neumann entropy keeps constant. Both quantum inner friction and coherence are generated along the driven stroke and coherence cannot be fully erased after the finite-time hot isochore. Using full counting statistics, we present the probability distribution functions of heat injection and total work per cycle, which are dependent on the time duration along each process. With these, we derive the analytical expressions for the thermodynamic quantities of the two-level heat engine, such as total work, thermodynamic efficiency, entropy production, and work fluctuations, in which effects of coherence, squeezing, inner friction and finite-time heat exchange are included. We then numerically determine the thermodynamic quantities and the fluctuations using the parameters employed in the experimental implementation. Our results clarify the role of coherence and squeezing in the performance and fluctuations in the quantum Otto engines.
We present a detailed study of quantum thermal machines employing quantum systems as working substances. In particular, we study two different types of two-stroke cycles where two collections of identical quantum systems with evenly spaced energy levels are initially prepared at thermal equilibrium by putting them in contact with a cold and a hot thermal bath, respectively. The two cycles differ in the absence or the presence of a mediator system, while, in both cases, nonresonant exchange Hamiltonians are exploited as particle interactions. We show that the efficiencies of these machines depend only on the energy gaps of the systems composing the collections and are equal to the efficiency of ``equivalent'' Otto cycles. Focusing on the cases of qubits or harmonic oscillators for both models, we maximize the engine power and analyze, in the model without the mediator, the role of the waiting time between subsequent interactions. It turns out that the case with the mediator can bring performance advantages when the interaction times are comparable with the waiting time of the correspondent cycle without the mediator. We find that in both cycles, the power peaks of qubit systems can surpass the Curzon-Ahlborn efficiency. Finally, we compare our cycle without the mediator with previous schemes of the quantum Otto cycle showing that high coupling is not required to achieve the same maximum power.
Developments in the thermodynamics of small quantum systems envisage nonclassical thermal machines. In this scenario, energy fluctuations play a relevant role in the description of irreversibility. We experimentally implement a quantum heat engine based on a spin-1/2 system and nuclear magnetic resonance techniques. Irreversibility at a microscope scale is fully characterized by the assessment of energy fluctuations associated with the work and heat flows. We also investigate the efficiency lag related to the entropy production at finite time. The implemented heat engine operates in a regime where both thermal and quantum fluctuations (associated with transitions among the instantaneous energy eigenstates) are relevant to its description. Performing a quantum Otto cycle at maximum power, the proof-of-concept quantum heat engine is able to reach an efficiency for work extraction (η≈42%) very close to its thermodynamic limit (η=44%).
The concept of thermal machines has evolved from the canonical steam engine to the recently proposed nanoscopic quantum systems as working fluids. The latter obey quantum open system dynamics and frequently operate in nonequilibrium conditions. However, the role of this dynamics in the overall performance of quantum heat engines remains an open problem. Here we analyze and optimize the efficiency and power output of two-stage quantum heat engines fueled by nonequilibrium steady states. In a charging first stage, the quantum working fluid consisting of a qutrit or two coupled qubits is connected to two reservoirs at different temperatures, which establish a heat current that stores ergotropy in the system; the second stage comprises a coherent driving force that extracts work from the machine in finite a amount of time; finally, the external drive is switched off and the machine enters a new cycle.
The minimal-coupling quantum heat engine is a thermal machine consisting of an explicit energy storage system, heat baths, and a working body, which alternatively couples to subsystems through discrete strokes --- energy-conserving two-body quantum operations. Within this paradigm, we present a general framework of quantum thermodynamics, where a work extraction process is fundamentally limited by a flow of non-passive energy (ergotropy), while energy dissipation is expressed through a flow of passive energy. It turns out that small dimensionality of the working body and a restriction only to two-body operations make the engine fundamentally irreversible. Our main result is finding the optimal efficiency and work production per cycle within the whole class of irreversible minimal-coupling engines composed of three strokes and with the two-level working body, where we take into account all possible quantum correlations between the working body and the battery. One of the key new tools is the introduced ``control-marginal state" --- one which acts only on a working body Hilbert space, but encapsulates all features regarding work extraction of the total working body-battery system. In addition, we propose a generalization of the many-stroke engine, and we analyze efficiency vs extracted work trade-offs, as well as work fluctuations after many cycles of the running of the engine.