Abstract Ultra-small mode volume nanophotonic crystal cavities have been proposed as powerful tools for increasing coupling rates in cavity quantum electrodynamics systems. However, their adoption in quantum information applications remains elusive. In this work, we investigate possible reasons why, and analyze the impact of different low mode volume resonator design choices on their utility in quantum optics experiments. We analyze band structure features and loss rates of low mode volume bowtie cavities in diamond and demonstrate independent design control over cavity-emitter coupling strength and loss rates. Further, using silicon vacancy centers in diamond as exemplary emitters, we investigate the influence of placement imprecision. We find that the benefit on photon collection efficiency and indistinguishability is limited, while the fabrication complexity of ultra-small cavity designs increases substantially compared to conventional photonic crystals. We conclude that ultra-small mode volume designs are primarily of interest for dispersive spin-photon interactions, which are of great interest for future quantum networks.
Abstract Ultra-small mode volume nanophotonic crystal cavities have been proposed as powerful tools for increasing coupling rates in cavity quantum electrodynamics systems. However, their adoption in quantum information applications remains elusive. In this work, we investigate possible reasons why, and analyze the impact of different low mode volume resonator design choices on their utility in quantum optics experiments. We analyze band structure features and loss rates of low mode volume bowtie cavities in diamond and demonstrate independent design control over cavity-emitter coupling strength and loss rates. Further, using silicon vacancy centers in diamond as exemplary emitters, we investigate the influence of placement imprecision. We find that the benefit on photon collection efficiency and indistinguishability is limited, while the fabrication complexity of ultra-small cavity designs increases substantially compared to conventional photonic crystals. We conclude that ultra-small mode volume designs are primarily of interest for dispersive spin-photon interactions, which are of great interest for future quantum networks.
Solid-state atomlike systems have great promise for linear optic quantum computing and quantum communication but are burdened by phonon sidebands and broadening due to surface charges. Nevertheless, coupling to a small-mode-volume cavity would allow high rates of extraction from even highly dephased emitters. We consider the nitrogen-vacancy center in diamond, a system understood to have a poor quantum optics interface with highly distinguishable photons, and design a silicon nitride cavity that allows 99% efficient extraction of photons at 200 K with an indistinguishability of > 50%, improvable by external filtering. We analyze our design using Lumerical fdtd simulations and treat optical emission using a cavity-QED master equation valid at and beyond strong coupling and that includes both zero-phonon line broadening and sideband emission. The simulated design is compact ($<10\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{m}$) and, owing to its planar geometry, can be fabricated using standard silicon processes. Our work therefore points toward scalable fabrication of noncryogenic atomlike efficient sources of indistinguishable photons.
Strongly interacting systems of atoms and photons are an important resource in many active areas of research, including quantum information science, quantum simulation, and metrology. Frequently, the strength of these interactions is enhanced by using an optical resonator to confine light to a small volume. In recent years, there have been efforts to replace traditional Fabry–Pérot resonators, formed from macroscopic mirrors, with micro- and nano-fabricated systems, leveraging techniques and infrastructure from semiconductor manufacture to scalably produce high-quality, small mode volume waveguides and resonators. Of particular interest are nano-fabricated photonic crystals, in which very fine control over modal and dispersion properties is possible. Here I describe our efforts to reliably produce photonic crystal waveguides with guided modes designed to trap and interrogate an array of ultracold cesium atoms. Specifically, I present models capturing band placement, modal structure, finite photonic crystal effects, and waveguide input and output coupling; I discuss the techniques we use to fabricate our photonic crystal waveguides; and I describe our characterization capabilities and the packaging and installation of the waveguides into the atomic physics system.
The sub-wavelength optical confinement and low optical loss of nanophotonic devices dramatically enhances the interaction between light and matter within these structures. When nanophotonic devices are combined with an efficient optical coupling channel, nonlinear optical behavior can be observed at low power levels in weakly-nonlinear materials. In a similar vein, when resonant atomic systems interact with nanophotonic devices, atom-photon coupling effects can be observed at a single quanta level. Crucially, the chip based nature of nanophotonics provides a scalable platform from which to study these effects. This thesis addresses the use of nanophotonic devices in nonlinear and quantum optics, including device design, optical coupling, fabrication and testing, modeling, and integration with more complex systems. We present a fiber taper coupling technique that allows efficient power transfer from an optical fiber into a photonic crystal waveguide. Greater than 97% power transfer into a silicon photonic crystal waveguide is demonstrated. This optical channel is then connected to a high-Q (> 40,000), ultra-small mode volume (V 44% of the photons input to a fiber. This permits the observation of optical bistability in silicon for sub-mW input powers at telecommunication wavelengths. To port this technology to cavity QED experiments at near-visible wavelengths, we also study silicon nitride microdisk cavities at wavelengths near 852 nm, and observe resonances with Q > 3 million and V
High Resolution Image Download MS PowerPoint Slide Spin-based, quantum-photonics promise to realize distributed quantum computing and quantum networks. The performance depends on an efficient entanglement distribution where cavity quantum electrodynamics could boost the efficiency. The central challenge is the development of compact devices with large spin-photon coupling rates and a high operation bandwidth. Photonic crystal cavities comprise strong field confinement but require highly accurate positioning of atomic systems in mode field maxima. Negatively charged silicon-vacancy centers in diamond emerged as promising atom-like systems. Spectral stability and access to long-lived, nuclear-spin memories enabled elementary demonstrations of quantum network nodes, including memory-enhanced quantum communication. In a hybrid approach, we deterministically place SiV-containing nanodiamonds inside one hole of one-dimensional, freestanding, Si 3 N 4 -based photonic crystal cavities and coherently couple individual optical transitions to cavity modes. We optimize light–matter coupling utilizing two-mode composition, waveguiding, Purcell-enhancement, and cavity-resonance tuning. The resulting photon flux increases by 14 compared to free space. Corresponding lifetime-shortening below 460 ps puts potential operation bandwidth beyond GHz rates.
Coherent interfaces between optical photons and long-lived matter qubits form a key resource for a broad range of quantum technologies. Cavity quantum electrodynamics (cQED) offers a route to achieve such an interface by enhancing interactions between cavity-confined photons and individual emitters. Over the last two decades, a promising new class of emitters based on defect centers in diamond has emerged, combining long spin coherence times with atom-like optical transitions. More recently, advances in optical resonator technologies have made it feasible to realize cQED in diamond. This article reviews progress towards coupling color centers in diamond to optical resonators, focusing on approaches compatible with quantum networks. We consider the challenges for cQED with solid-state emitters and introduce the relevant properties of diamond defect centers before examining two qualitatively different resonator designs: micrometer-scale Fabry–Perot cavities and diamond nanophotonic cavities. For each approach, we examine the underlying theory and fabrication, discuss strengths and outstanding challenges, and highlight state-of-the-art experiments.
To take existing quantum optical experiments and devices into a more practical regimes requires the construction of robust, solid-state implementations. In particular, to observe the strong-coupling regime of tom-photon interactions requires very small cavities and large quality factors. Here we show that the slot-waveguide geometry recently introduced for photonic applications is also promising for quantum optical applications in the visible regime. We study diamond- and GaP-based slot-waveguide cavities (SWCs) compatible with diamond colour centres e.g. nitrogen-vacancy (NV) defect. We show that one can achieve increased single-photon Rabi frequencies of order O(10(11)) rad s(-1) in ultra-small cavity modal volumes, nearly 2 orders of magnitude smaller than previously studied diamond-based photonic crystal cavities.