The ability for users to access quantum computers through the cloud has increased rapidly in recent years. Despite still being Noisy Intermediate-Scale Quantum (NISQ) machines, modern quantum computers are now being actively employed for research and by numerous startups. Quantum algorithms typically produce probabilistic results, necessitating repeated execution to produce the desired outcomes. In order for the execution to begin from the specified ground state each time and for the results of the prior execution not to interfere with the results of the subsequent execution, the reset mechanism must be performed between each iteration to effectively reset the qubits. However, due to noise and errors in quantum computers and specifically these reset mechanisms, a noisy reset operation may lead to systematic errors in the overall computation, as well as potential security and privacy vulnerabilities of information leakage. To counter this issue, we thoroughly examine the state leakage problem in quantum computing, and then propose a solution by employing the classical and quantum one-time pads before the reset mechanism to prevent the state leakage, which works by randomly applying simple gates for each execution of the circuit. In addition, this work explores conditions under which the classical one-time pad, which uses fewer resources, is sufficient to protect state leakage. Finally, we study the role of various errors in state leakage, by evaluating the degrees of leakage under different error levels of gate, measurement, and sampling errors. Our findings offer new perspectives on the design of reset mechanisms and secure quantum computing systems.
The ability for users to access quantum computers through the cloud has increased rapidly in recent years. Despite still being Noisy Intermediate-Scale Quantum (NISQ) machines, modern quantum computers are now being actively employed for research and by numerous startups. Quantum algorithms typically produce probabilistic results, necessitating repeated execution to produce the desired outcomes. In order for the execution to begin from the specified ground state each time and for the results of the prior execution not to interfere with the results of the subsequent execution, the reset mechanism must be performed between each iteration to effectively reset the qubits. However, due to noise and errors in quantum computers and specifically these reset mechanisms, a noisy reset operation may lead to systematic errors in the overall computation, as well as potential security and privacy vulnerabilities of information leakage. To counter this issue, we thoroughly examine the state leakage problem in quantum computing, and then propose a solution by employing the classical and quantum one-time pads before the reset mechanism to prevent the state leakage, which works by randomly applying simple gates for each execution of the circuit. In addition, this work explores conditions under which the classical one-time pad, which uses fewer resources, is sufficient to protect state leakage. Finally, we study the role of various errors in state leakage, by evaluating the degrees of leakage under different error levels of gate, measurement, and sampling errors. Our findings offer new perspectives on the design of reset mechanisms and secure quantum computing systems.
The rapid expansion of cloud-based access to quantum computers has significantly democratized their usage, enabling a more diverse range of users to explore and utilize quantum computing technologies. However, this increased accessibility also introduces security and privacy concerns. Cloud-based access and sharing of quantum computers require secure means to isolate different users, such as through the use of reset operations. However, current reset operations, including direct thermalization and fast reset instructions, are vulnerable to information leakage due to imperfections in quantum computer operations. To counteract these vulnerabilities, our work proposes multiple implementations of the one-time pad (OTP) defense mechanism. These implementations, specifically random execution, dynamic circuit, and control gate, involve applying Pauli or control gates randomly before executing standard reset operations. We analyze and compare these implementations in detail, demonstrating their effectiveness in mitigating state leakage. This work offers innovative approaches to enhancing the security of reset operations and the safety of cloud-based quantum computers.
The development of quantum computers has been advancing rapidly in recent years. As quantum computers become more widely accessible, potentially malicious users could try to execute their code on the machines to leak information from other users, interfere with or manipulate the results of other users, or reverse engineer the underlying quantum computer architecture and its intellectual property. Among different security threats, previous work has demonstrated information leakage across the reset operations, and it then proposed a secure reset operation could be an enabling technology that allows the sharing of a quantum computer among different users or different quantum programs of the same user. In this study, we delve deeper into the reset attack, aiming to augment its efficacy and capabilities and the countermeasure to protect from this attack. First, we propose a set of new extended reset attacks that could be more stealthy by hiding the intention of the attacker's circuit. This work shows various concealing circuits and how attackers can retrieve information from the execution of a previous shot of a circuit, even if the concealing circuit is used between the reset operation (of the victim, after the shot of the circuit is executed) and the measurement (of the attacker). Second, based on the uncovered new possible attacks, this work proposes a set of heuristic checks that could be applied at transpile time to check for the existence of malicious circuits that try to steal information via the attack on the reset operation. Unlike run-time protection or added secure reset gates, this work proposes a complimentary, compile-time security solution to the attacks on reset operation.
Quantum computers require high-fidelity quantum gates. These gates are obtained by routine calibration tasks that eat into the availability of cloud-based devices. Restless circuit execution speeds up characterization and calibration by foregoing qubit reset between circuits. Postprocessing the measured data recovers the desired signal. However, since the qubits are not reset, leakage---typically present at the beginning of the calibration---may cause issues. Here we develop a simulator of restless circuit execution based on a Markov chain to study the effect of leakage. In the context of error-amplifying single-qubit gates sequences, we show that restless calibration tolerates up to 0.5% of leakage, which is large compared to the ${10}^{\ensuremath{-}4}$ gate fidelity of modern single-qubit gates. Furthermore, we show that restless circuit execution with leaky gates reduces by 33% the sensitivity of the ORBIT cost function developed by J. Kelly et al. which is typically used in closed-loop optimal control [Phys. Rev. Lett. 112, 240504 (2014)]. Our results are obtained with standard qubit state discrimination showing that restless circuit execution is resilient against misclassified noncomputational states. In summary, the restless method is sufficiently robust against leakage in both standard and closed-loop optimal control gate calibration to provided accurate results.
Enabling the sharing of quantum computers among different users requires a secure reset operation that can reset the state of a qubit to ground state |0> and prevent leakage of the state to a post-reset circuit. This work highlights that the existing reset operations available in superconducting qubit NISQ quantum computers are not fully secure. In particular, this work demonstrates for the first time a new type of higher-energy state attack. Although NISQ quantum computers are typically abstracted as working with only energy states |0> and |1>, this work shows that it is possible for unprivileged users to set the qubit state to |2 or |3>. By breaking the abstraction of a two-level system, the new higher-energy state attack can be deployed to affect the operation of circuits or for covert communication between circuits. This work shows that common reset protocols are ineffective in resetting a qubit from a higher-energy state. To provide a defense, this work proposes a new Cascading Secure Reset (CSR) operation. CSR, without hardware modifications, is able to efficiently and reliably reset higher-energy states back to |0>. CSR achieves a reduction in |3> -initialized state leakage channel capacity by between 1 and 2 orders of magnitude, and does so with a 25x speedup compared with the default decoherence reset.
Quantum computing is entering a transitional regime between noisy intermediate-scale quantum (NISQ) processing and early fault-tolerant quantum computation (FTQC), in which increasingly capable hardware is beginning to support repeated syndrome measurements, partial error correction, and logical-qubit operations, while residual physical and logical errors remain non-negligible. In this regime, error suppression, error mitigation, and quantum error correction are increasingly better viewed as complementary layers of a unified error-reduction strategy rather than as separate approaches, with each acting at a different stage of the quantum computation to improve simulation reliability. Thus, in this review, we provide a practical and forward-looking overview of the principal hardware error sources and the corresponding error suppression and mitigation methods for reducing their impact across the current NISQ-FTQC transition. We discuss hardware-aware circuit design, coherent-error suppression, readout mitigation, noise extrapolation, classical inference, and software-supported workflows, with particular emphasis on their implementation on actual quantum processors. We further examine how error mitigation techniques can be adapted to encoded and logical-qubit settings so that they can operate alongside quantum error correction to suppress residual logical errors and improve the accuracy of computation in the early fault-tolerant regime.
ABSTRACT: Recent research has tackled the problem of mitigating noise present in quantum computers in the Noisy Intermediate-Scale Quantum (NISQ) era to enable precise computations and to benefit from the intrinsic properties of quantum mechanics. For this matter, an important task is the characterization of qubits available in quantum devices so as to provide insights on how to reduce noise on the final output of a quantum circuit. Characterization comprises analysis of noise sources and this information can be used to reduce noise with methods such as Cycle Benchmarking, Quantum Error Mitigation, Quantum Error Correction and others. Here, we study optimization of pulses through Quantum Optimal Control (QOC) to obtain higher gate fidelity. We will explore an algorithm that performs calibration on specific quantum gates by implementing optimized pulse schedules to subsequently use the algorithm for analysis of noise sources. Using calibrated gates as input, several benchmarking protocols, including pulse noise extrapolation, leakage analysis from quantum optimal control, and machine learning based classification of qubit readout, will be tested to extract precise information on how noise influences the analyzed qubits. We will explain and discuss different techniques for obtaining properties of qubits and quantum computers. We will implement state discrimination with a Machine Learning (ML) focus to analyze readout errors caused by factors such as cross-talk and leakage into higher quantum states. We will perform noise fitting of optimized pulses and evaluate the effectiveness of important quantum algorithms at the pulse level.