The AEgIS experiment at CERN recently decided to adopt a control system solution based on the Sinara/ARTIQ open hardware and software infrastructure. This decision meant to depart from the previously used paradigm of custom-made electronics and software to control the experiment's equipment. Instead, adopting a solution with long-term support and used in many quantum physics experiments guarantees a vivid community using similar infrastructures. This transition reduces the risks and development timeline for integrating new equipment seamlessly within the setup. This work reviews the motivation, the setup, and the chosen hardware and presents several planned further steps in developing the control system.
The AEgIS experiment at CERN recently decided to adopt a control system solution based on the Sinara/ARTIQ open hardware and software infrastructure. This decision meant to depart from the previously used paradigm of custom-made electronics and software to control the experiment's equipment. Instead, adopting a solution with long-term support and used in many quantum physics experiments guarantees a vivid community using similar infrastructures. This transition reduces the risks and development timeline for integrating new equipment seamlessly within the setup. This work reviews the motivation, the setup, and the chosen hardware and presents several planned further steps in developing the control system.
The AEgIS experiment located at the Antiproton Decelerator at CERN aims to measure the gravitational fall of a cold antihydrogen pulsed beam. The precise observation of the antiatoms in the Earth gravitational field requires a controlled production and manipulation of antihydrogen. The neutral antimatter is obtained via a charge exchange reaction between a cold plasma of antiprotons from ELENA decelerator and a pulse of Rydberg positronium atoms. The current custom electronics designed to operate the 5 and 1 T Penning traps are going to be replaced by a control system based on the ARTIQ & Sinara open hardware and software ecosystem. This solution is present in many atomic, molecular and optical physics experiments and devices such as quantum computers. We report the status of the implementation as well as the main features of the new control system.
Sinara, an open-source hardware ecosystem, has been designed to facilitate quantum experiments' efficient man-agement. Abiding by the CERN Open Hardware License, Sinara comprises over 50 modules, most of which are commercially available, representing a broad spectrum of capabilities. A crucial element of Sinara is its integration with the Advanced Real-Time Infrastructure for Quantum physics (ARTIQ) control system. This combination provides researchers with a robust toolkit with capabilities such as 1 ns timing resolution. It also includes a comprehensive suite of tools designed to manage experiment scheduling, versioning, results storage, and hardware management, enhancing the efficiency of quantum experiment workflows. The poster presents proposed development of Sinara based control system for a commercially available ion trap solution, with a systematic strategy to replace components of the control system with Sinara modules. This method affords valuable hands-on experience that will help in the design of future modules and the enhancement of existing ones. Proposed Sinara control system is to be made up of several subsystems, including high voltage controls, electrical controls, shuttling and readout, and laser controls. Each subsystem is managed through a PC and operated via ARTIQ or MQTT protocol, providing a structured framework for management. The subsystems utilize several advanced hardware components, including the Kasli v2 controller, Shuttler DAC, and DIOT STM Controller, among others.
The complexity of quantum experimentation setups generates demand for a hardware platform that ensures means of standardization of the equipment used as well as setup repeatability.Sinara Hardware is an open-source answer to those challenges. It offers a modular architecture and well over 50 different modules. While originating from ion trapping experiments, it provides an ecosystem that can meet a wide range of quantum experimentation needs. Accompanied by researchers and engineers from different universities and private companies, Sinara Hardware is not only a hardware platform but also a vibrant community.Sinara Hardware is developed along with an open-source control system - ARTIQ. ARTIQ provides a high-level programming interface along with experiment management tools. It offers nanosecond timing accuracy, sub-microsecond latency and means of timing distribution across several controller modules.This poster covers the developments from the last 2 years in the Sinara Hardware project. The most interesting novelties are: CERN Distributed IO Tier (DIOT) integration that will introduce backplane for communication and will enable use of DIOT Zynq UltraScale+ based controller; Artix-7 based FMC (FPGA Mezzanine Card) carrier along with two Sinara-dedicated FMCs: Shuttler - 125 MSPS 16 ch. 16-bit DAC (Digital to Analog Converter), with separate analog front end for application versatility and Waver - 1.5 GSPS 4 ch. 16-bit DAC; Unified Arbitrary Waveform Generator Framework as a common firmware platform for Sinara DAC applications as well as Xilinx RFSoC-based high bandwidth signal generator. Additionally, an overview of what is to be expected in future developments is shown.
Quantum computing offers a new paradigm for advancing high-energy physics research by enabling novel methods for representing and reasoning about fundamental quantum mechanical phenomena.Realizing these ideals will require the development of novel computational tools for modeling and simulation, detection and classification, data analysis, and forecasting of high-energy physics (HEP) experiments.While the emerging hardware, software, and applications of quantum computing are exciting opportunities, significant gaps remain in integrating such techniques into the HEP community research programs.Here we identify both the challenges and opportunities for developing quantum computing systems and software to advance HEP discovery science.We describe opportunities for the focused development of algorithms, applications, software, hardware, and infrastructure to support both practical and theoretical applications of quantum computing to HEP problems within the next 10 years.
Precise manipulation of matter at the atomic or molecular level has provided the path for the nanotechnological revolution impacting diverse fields such as biology, medicine, material science, quantum technologies, and electronics. At the Antiproton Decelerator facility at CERN, the AEgIS experiment utilises state-of-the-art technology to store and manipulate synthesised exotic atoms containing both matter and antimatter. Such experiments lay the groundwork for a better understanding of the fundamental interactions and hold the potential to unravel the enigma of the absence of antimatter in our universe. Additionally, the developed techniques advance the technological frontier of controlling the quantum states of ions, a critical aspect of quantum sensing and quantum computing applications.
Quantum computing offers a new paradigm for advancing high-energy physics research by enabling novel methods for representing and reasoning about fundamental quantum mechanical phenomena. Realizing these ideals will require the development of novel computational tools for modeling and simulation, detection and classification, data analysis, and forecasting of high-energy physics (HEP) experiments. While the emerging hardware, software, and applications of quantum computing are exciting opportunities, significant gaps remain in integrating such techniques into the HEP community research programs. Here we identify both the challenges and opportunities for developing quantum computing systems and software to advance HEP discovery science. We describe opportunities for the focused development of algorithms, applications, software, hardware, and infrastructure to support both practical and theoretical applications of quantum computing to HEP problems within the next 10 years.