Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2312.13703 · Applied Physics Letters

Improving magnetic-field resilience of NbTiN planar resonators using a hard-mask fabrication technique

Arne Bahr, Matteo Boselli, Benjamin Huard, Audrey Bienfait

Published Mar 11, 2024• 7 citations
arXivHTMLPDF

Abstract

High-quality factor microwave resonators operating in a magnetic field are a necessity for some quantum sensing applications and hybrid platforms. Losses in microwave superconducting resonators can have several origins, including microscopic defects, usually known as two-level-systems. Here, we characterize the magnetic field response of NbTiN resonators patterned on sapphire and observe clear absorption lines occurring at specific magnetic fields. We identify the spin systems responsible for these features, including a yet unreported spin with g = 1.85 that we attribute to defects in the NbTiN thin film. We develop mitigation strategies involving, namely, an aluminum etch mask, resulting in maintaining quality factors above Q>2×105 in the range of 0–0.3 T.

DOI
10.1063/5.0191393

Related papers

Magnetic field robust high quality factor NbTiN superconducting microwave resonators

Manuel Müller, Thomas Luschmann, A Faltermeier +13 more

Abstract We systematically study the performance of compact lumped element planar microwave Nb70Ti30N (NbTiN) resonators operating at 5 GHz in external in-plane magnetic fields up to 440 mT, a broad temperature regime from 2.2 K up to 13 K, as well as mK temperatures. For comparison, the resonators have been fabricated on thermally oxidized and pristine, (001) oriented silicon substrates. When operating the resonators in the multi-photon regime at T = 2.2 K, we find internal quality factors Q int ≃ 2 × 105 for NbTiN resonators grown on pristine Si substrates. In addition, we investigate the Q-factors of the resonators on pristine Si substrates at millikelvin temperatures to assess their applicability for quantum applications. We find Q int ≃ 2 × 105 in the single photon regime and Q int ≃ 5 × 105 in the high power regime at T = 7 mK. From the excellent performance of our resonators over a broad temperature and magnetic field range, we conclude that NbTiN deposited on Si (100) substrates, where the surface oxide has been removed, constitutes a promising material platform for electron spin resonance and ferromagnetic resonance experiments using superconducting planar microwave resonators.

arXiv:2112.08296•Materials for Quantum Technology•Feb 2, 2022•25 citations

Fabrication and characterization of NbTi microwave superconducting resonators

Roberto Russo, André Chatel, Nergiz Şahin Solmaz +4 more

Superconducting resonators are widely used in fields spanning from quantum computing to electron spin resonance (ESR) spectroscopy. With the goal of realizing superconducting resonators, a broad variety and combination of superconducting materials, substrates and fabrication processes have been used and thoroughly reported in the literature. High temperature superconductors such as YBCO and low temperature superconductors such as Nb, NbN, NbTiN and Al are the major actors in the domain. In this work, we investigate the possibility to extend the family of suitable low temperature superconductors for the realization of planar superconducting microwave resonators for future ESR applications. In particular, this study focuses on NbTi, a widely used material to realize superconducting cables but not investigated for planar resonating structures at GHz frequencies. A 150 nm thick film of NbTi is sputtered and patterned on top of an Al2O3 substrate. For devices resonating around 6.8 GHz quality factors greater than 10,000 are observed at 3 K and in magnetic fields up to 250 mT.

Micro and Nano Engineering•May 10, 2023•9 citations

High-quality and field resilient microwave resonators on Ge quantum well heterostructures

Luigi Ruggiero, Carlo Ciaccia, Pauline Drexler +5 more

Abstract Superconducting resonators integrated with germanium (Ge) quantum wells (QWs) offer a promising platform for hybrid quantum devices. Yet, in the most common heterostructure architectures, they have so far been limited by sizable photon losses. Here, we report the fabrication and characterization of microwave resonators patterned in the aluminum (Al) thin film of an in-situ grown superconductor/semiconductor hybrid heterostructure (HS). The semiconductor part of this hybrid HS is grown on a commercial Ge substrate. We consistently achieve internal quality factors Q i > 1000, surpassing previous results on Ge QW heterostructures grown using the concept of a virtual Ge substrate on silicon (Si) substrates. We reach Q i ≈ 49,000 at single-photon occupation and a plateau of Q i ≈ 20,000 at sub-one photon, an order of magnitude larger than any previously reported value of resonators on Ge QW structures at low power. We further characterize the thin Al film forming the resonator, extracting its kinetic inductance and superconducting gap, and studying its magnetic field dependence. Notably, the resonance remains well-defined up to in-plane magnetic fields of 850 mT. A hysteresis emerges in the out-of-plane magnetic field dependence, for both the resonance frequency and the quality factor, indicating an interesting interplay between vortex-and quasiparticle loss mechanisms.

arXiv:2512.20238•npj Quantum Information•Jun 11, 2026•3 citations

Two-level system loss characterization of NbTi superconducting resonators on Si/SiO2 substrates

Bongkeon Kim, Yong‐Joo Doh

Superconducting coplanar waveguide (SCPW) resonators, key components for quantum computing and sensing applications, require a high internal quality factor ( Q i ) for effective qubit readout and quantum sensing applications. Minimizing two-level system (TLS) losses, particularly at material interfaces, is critical for gatemon and topological qubits operating at low temperatures and in high magnetic fields. NbTi, a superconducting alloy with a high upper critical field, enables SCPW resonators resilient to such conditions. We fabricated NbTi SCPW resonators on Si/SiO 2 substrates and systematically characterized their TLS-limited quality factors as functions of temperature and microwave photon number. Our results demonstrate that NbTi-based SCPWs on Si/SiO 2 substrates provide a promising platform for developing next-generation quantum circuits. • Successfully fabricated NbTi SCPW resonators on Si/SiO 2 substrates. • Characterized NbTi SCPW across temperature and photon ranges for quantum apps. • Achieved record TLS-limited quality factor Q TLS,0 = 9.21 × 10 4 for SCPW on Si/SiO 2 . • NbTi SCPW on Si/SiO 2 is promising for gatemon and topological qubits.

arXiv:2509.01447•Current Applied Physics•Oct 18, 2025•2 citations

Reducing microwave loss in superconducting resonators due to trapped vortices

Chao Song, M. P. DeFeo, K. Yu +1 more

Microwave resonators with high quality factors have enabled many recent breakthroughs with superconducting qubits and photon detectors, typically operated in shielded environments to reduce the ambient magnetic field. Insufficient shielding or pulsed control fields can introduce vortices, leading to reduced quality factors, although increased pinning can mitigate this effect. A narrow slot etched into the resonator surface provides a straightforward method for pinning enhancement without otherwise affecting the resonator. Resonators patterned with such a slot exhibited over an order of magnitude reduction in the excess loss due to vortices compared with identical resonators from the same film with no slot.

arXiv:0911.3131•Applied Physics Letters•Dec 7, 2009•74 citations

Tantalum-Encapsulated Niobium Superconducting Resonators: High Internal Quality Factor and Improved Temporal Stability via Surface Passivation

Anas Alkhazaleh, Juan Villegas, Florent Ravaux +1 more

Superconducting coplanar waveguide resonators are essential components in quantum processors, where their internal quality factor (Qi) constrains qubit coherence and readout fidelity. In niobium devices, microwave losses at millikelvin temperatures are strongly influenced by two-level systems (TLS) associated with the complex NbOx surface oxide. To mitigate these losses, we investigate a surface-engineering approach in which Nb films are capped in situ with a thin tantalum layer to suppress Nb2O5 formation and replace the native NbOx interface with a Ta-based oxide. We fabricate Nb/Ta bilayer and reference Nb resonators on high-resistivity silicon using identical DC sputtering and wet etching conditions, and characterize their performance at millikelvin temperatures. Fresh Ta-encapsulated devices exhibit internal quality factors up to 2.4 x 10^6 in the near-single-photon regime, with power dependence consistent with reduced TLS-related loss at the metal-air interface. A control Nb device fabricated under the same process shows comparatively lower Q_TLS, consistent with the beneficial effect of the Ta capping layer. Furthermore, ageing tests performed on Nb/Ta resonators after six months reveal a moderate reduction in Q_TLS relative to their initial values, yet the performance remains superior to newly fabricated Nb-only devices. These results suggest that thin Ta encapsulation enhances interface quality and contributes to improved temporal stability while remaining compatible with Nb-based fabrication workflows.

quant-pharXiv:2604.09050•Apr 13, 2026•2 citations
High-quality factor microwave resonators operating in a magnetic field are a necessity for some quantum sensing applications and hybrid platforms. Losses in microwave superconducting resonators can have several origins, including microscopic defects, usually known as two-level-systems. Here, we characterize the magnetic field response of NbTiN resonators patterned on sapphire and observe clear absorption lines occurring at specific magnetic fields. We identify the spin systems responsible for these features, including a yet unreported spin with g = 1.85 that we attribute to defects in the NbTiN thin film. We develop mitigation strategies involving, namely, an aluminum etch mask, resulting in maintaining quality factors above Q>2×105 in the range of 0–0.3 T.
Abstract We systematically study the performance of compact lumped element planar microwave Nb70Ti30N (NbTiN) resonators operating at 5 GHz in external in-plane magnetic fields up to 440 mT, a broad temperature regime from 2.2 K up to 13 K, as well as mK temperatures. For comparison, the resonators have been fabricated on thermally oxidized and pristine, (001) oriented silicon substrates. When operating the resonators in the multi-photon regime at T = 2.2 K, we find internal quality factors Q int ≃ 2 × 105 for NbTiN resonators grown on pristine Si substrates. In addition, we investigate the Q-factors of the resonators on pristine Si substrates at millikelvin temperatures to assess their applicability for quantum applications. We find Q int ≃ 2 × 105 in the single photon regime and Q int ≃ 5 × 105 in the high power regime at T = 7 mK. From the excellent performance of our resonators over a broad temperature and magnetic field range, we conclude that NbTiN deposited on Si (100) substrates, where the surface oxide has been removed, constitutes a promising material platform for electron spin resonance and ferromagnetic resonance experiments using superconducting planar microwave resonators.
Superconducting resonators are widely used in fields spanning from quantum computing to electron spin resonance (ESR) spectroscopy. With the goal of realizing superconducting resonators, a broad variety and combination of superconducting materials, substrates and fabrication processes have been used and thoroughly reported in the literature. High temperature superconductors such as YBCO and low temperature superconductors such as Nb, NbN, NbTiN and Al are the major actors in the domain. In this work, we investigate the possibility to extend the family of suitable low temperature superconductors for the realization of planar superconducting microwave resonators for future ESR applications. In particular, this study focuses on NbTi, a widely used material to realize superconducting cables but not investigated for planar resonating structures at GHz frequencies. A 150 nm thick film of NbTi is sputtered and patterned on top of an Al2O3 substrate. For devices resonating around 6.8 GHz quality factors greater than 10,000 are observed at 3 K and in magnetic fields up to 250 mT.
Abstract Superconducting resonators integrated with germanium (Ge) quantum wells (QWs) offer a promising platform for hybrid quantum devices. Yet, in the most common heterostructure architectures, they have so far been limited by sizable photon losses. Here, we report the fabrication and characterization of microwave resonators patterned in the aluminum (Al) thin film of an in-situ grown superconductor/semiconductor hybrid heterostructure (HS). The semiconductor part of this hybrid HS is grown on a commercial Ge substrate. We consistently achieve internal quality factors Q i > 1000, surpassing previous results on Ge QW heterostructures grown using the concept of a virtual Ge substrate on silicon (Si) substrates. We reach Q i ≈ 49,000 at single-photon occupation and a plateau of Q i ≈ 20,000 at sub-one photon, an order of magnitude larger than any previously reported value of resonators on Ge QW structures at low power. We further characterize the thin Al film forming the resonator, extracting its kinetic inductance and superconducting gap, and studying its magnetic field dependence. Notably, the resonance remains well-defined up to in-plane magnetic fields of 850 mT. A hysteresis emerges in the out-of-plane magnetic field dependence, for both the resonance frequency and the quality factor, indicating an interesting interplay between vortex-and quasiparticle loss mechanisms.
Superconducting coplanar waveguide (SCPW) resonators, key components for quantum computing and sensing applications, require a high internal quality factor ( Q i ) for effective qubit readout and quantum sensing applications. Minimizing two-level system (TLS) losses, particularly at material interfaces, is critical for gatemon and topological qubits operating at low temperatures and in high magnetic fields. NbTi, a superconducting alloy with a high upper critical field, enables SCPW resonators resilient to such conditions. We fabricated NbTi SCPW resonators on Si/SiO 2 substrates and systematically characterized their TLS-limited quality factors as functions of temperature and microwave photon number. Our results demonstrate that NbTi-based SCPWs on Si/SiO 2 substrates provide a promising platform for developing next-generation quantum circuits. • Successfully fabricated NbTi SCPW resonators on Si/SiO 2 substrates. • Characterized NbTi SCPW across temperature and photon ranges for quantum apps. • Achieved record TLS-limited quality factor Q TLS,0 = 9.21 × 10 4 for SCPW on Si/SiO 2 . • NbTi SCPW on Si/SiO 2 is promising for gatemon and topological qubits.
Microwave resonators with high quality factors have enabled many recent breakthroughs with superconducting qubits and photon detectors, typically operated in shielded environments to reduce the ambient magnetic field. Insufficient shielding or pulsed control fields can introduce vortices, leading to reduced quality factors, although increased pinning can mitigate this effect. A narrow slot etched into the resonator surface provides a straightforward method for pinning enhancement without otherwise affecting the resonator. Resonators patterned with such a slot exhibited over an order of magnitude reduction in the excess loss due to vortices compared with identical resonators from the same film with no slot.
Superconducting coplanar waveguide resonators are essential components in quantum processors, where their internal quality factor (Qi) constrains qubit coherence and readout fidelity. In niobium devices, microwave losses at millikelvin temperatures are strongly influenced by two-level systems (TLS) associated with the complex NbOx surface oxide. To mitigate these losses, we investigate a surface-engineering approach in which Nb films are capped in situ with a thin tantalum layer to suppress Nb2O5 formation and replace the native NbOx interface with a Ta-based oxide. We fabricate Nb/Ta bilayer and reference Nb resonators on high-resistivity silicon using identical DC sputtering and wet etching conditions, and characterize their performance at millikelvin temperatures. Fresh Ta-encapsulated devices exhibit internal quality factors up to 2.4 x 10^6 in the near-single-photon regime, with power dependence consistent with reduced TLS-related loss at the metal-air interface. A control Nb device fabricated under the same process shows comparatively lower Q_TLS, consistent with the beneficial effect of the Ta capping layer. Furthermore, ageing tests performed on Nb/Ta resonators after six months reveal a moderate reduction in Q_TLS relative to their initial values, yet the performance remains superior to newly fabricated Nb-only devices. These results suggest that thin Ta encapsulation enhances interface quality and contributes to improved temporal stability while remaining compatible with Nb-based fabrication workflows.