Robust control of a quantum system is essential to utilize the current noisy quantum hardware to its full potential, such as quantum algorithms. To achieve such a goal, a systematic search for an optimal control for any given experiment is essential. The design of optimal control pulses requires accurate numerical models and, therefore, accurate characterization of the system parameters. We present an online Bayesian approach for quantum characterization of qutrit systems, which automatically and systematically identifies optimal experiments that provide maximum information on the system parameters, thereby greatly reducing the number of experiments that need to be performed on the quantum testbed. Unlike most characterization protocols that provide point-estimates of the parameters, the proposed approach is able to estimate their probability distribution. The applicability of the Bayesian experimental design technique was demonstrated on test problems, where each experiment was defined by a parameterized control pulse. In addition to this, we also present an approach for iterative pulse extension, which is robust under uncertainties in transition frequencies and coherence times, and shot noise, despite being initialized with wide uninformative priors. Furthermore, we provide a mathematical proof of the theoretical identifiability of the model parameters and present conditions on the quantum state under which the parameters are identifiable. The proof and conditions for identifiability are presented for both closed and open quantum systems using the Schrödinger equation and the Lindblad master equation, respectively.
Robust control of a quantum system is essential to utilize the current noisy quantum hardware to its full potential, such as quantum algorithms. To achieve such a goal, a systematic search for an optimal control for any given experiment is essential. The design of optimal control pulses requires accurate numerical models and, therefore, accurate characterization of the system parameters. We present an online Bayesian approach for quantum characterization of qutrit systems, which automatically and systematically identifies optimal experiments that provide maximum information on the system parameters, thereby greatly reducing the number of experiments that need to be performed on the quantum testbed. Unlike most characterization protocols that provide point-estimates of the parameters, the proposed approach is able to estimate their probability distribution. The applicability of the Bayesian experimental design technique was demonstrated on test problems, where each experiment was defined by a parameterized control pulse. In addition to this, we also present an approach for iterative pulse extension, which is robust under uncertainties in transition frequencies and coherence times, and shot noise, despite being initialized with wide uninformative priors. Furthermore, we provide a mathematical proof of the theoretical identifiability of the model parameters and present conditions on the quantum state under which the parameters are identifiable. The proof and conditions for identifiability are presented for both closed and open quantum systems using the Schrödinger equation and the Lindblad master equation, respectively.
Identifying and calibrating quantitative dynamical models for physical quantum systems is important for a variety of applications. Here we present a closed-loop Bayesian learning algorithm for estimating multiple unknown parameters in a dynamical model, using optimized experimental ``probe'' controls and measurement. The estimation algorithm is based on a Bayesian particle filter, and is designed to autonomously choose informationally optimized probe experiments with which to compare to model predictions. We demonstrate the performance of the algorithm in both simulated calibration tasks and in an experimental single-qubit ion-trap system. Experimentally, we find that, with 60 times fewer samples, we exceed the precision of conventional calibration methods, delivering an approximately 93 times improvement in efficiency (as quantified by the reduction of measurements and resets required to achieve a target residual uncertainty and multiplied by the increase in accuracy). In simulated and experimental demonstrations, we see that successively longer pulses are selected as the posterior uncertainty iteratively decreases, leading to an exponential improvement in the accuracy of model parameters with the number of experimental queries, and a commensurate increase in the per-query time.
Motivated by the noisy and fluctuating behavior of current quantum computing devices, this paper presents a data-driven characterization approach for estimating transition frequencies and decay times in a Lindbladian dynamical model of a superconducting quantum device. The data includes parity events in the transition frequency between the first and second excited states. A simple but effective mathematical model, based upon averaging solutions of two Lindbladian models, is demonstrated to accurately capture the experimental observations. A deterministic point estimate of the device parameters is first performed to minimize the misfit between data and Lindbladian simulations. These estimates are used to make an informed choice of prior distributions for the subsequent Bayesian inference. An additive Gaussian noise model is developed for the likelihood function, which includes two hyper-parameters to capture the noise structure of the data. The outcome of the Bayesian inference are posterior probability distributions of the transition frequencies, which for example can be utilized to design risk neutral optimal control pulses. The applicability of our approach is demonstrated on experimental data from the Quantum Device and Integration Testbed (QuDIT) at Lawrence Livermore National Laboratory, using a tantalum-based superconducting transmon device.
We explore methodologies for characterizing and controlling small quantum systems. We are interested in starting with a description of a quantum system, designing estimators for parameters of the system, developing robust and high-fidelity gates for the system using knowledge of these parameters, and experimentally verifying the performance of these gates. A strong emphasis is placed on using rigorous statistical methods, especially Bayesian ones, to analyze quantum system data. Throughout this thesis, the Nitrogen Vacancy system is used as an experimental testbed. Characterization of system parameters is done using quantum Hamiltonian learning, where we explore the use of adaptive experiment design to speed up learning rates. Gates for the full three-level system are designed with numerical optimal control methods that take into account imperfections of the control hardware. Gate quality is assessed using randomized benchmarking protocols, including standard randomized benchmarking, unitarity benchmarking, and leakage/loss benchmarking.
As quantum systems expand in size and complexity, manual qubit characterization and gate optimization will be a non-scalable and time-consuming venture. Physical qubits have to be carefully calibrated because quantum processors are very sensitive to the external environment, with control hardware parameters slowly drifting during operation, affecting gate fidelity. Currently, existing calibration techniques require complex and lengthy measurements to independently control the different parameters of each gate and are unscalable to large quantum systems. Therefore, fully automated protocols with the desired functionalities are required to speed up the calibration process. This paper aims to propose single-qubit calibration of superconducting qubits under continuous weak measurements from a real physical experimental settings point of view. We propose a real-time optimal estimator of qubit states, which utilizes weak measurements and Bayesian optimization to find the optimal control pulses for gate design. Our numerical results demonstrate a significant reduction in the calibration process, obtaining a high gate fidelity. Using the proposed estimator we estimated the qubit state with and without measurement noise and the estimation error between the qubit state and the estimator state is less than 0.02. With this setup, we drive an approximated pi pulse with final fidelity of 0.9928. This shows that our proposed strategy is robust against the presence of measurement and environmental noise and can also be applicable for the calibration of many other quantum computation technologies.
For several decades it has been appreciated that quantum computers hold incredible promise to perform calculations intractable to classical computation. However, this promise has be slow to realize. Dozens of quantum systems are currently being investigated for use in quantum information processing - none of which have yet demonstrated algorithms involving more than a handful of qubits and it remains unclear which, if any, of these systems will ultimately compose a scalable, robust quantum information processing architecture. In this thesis we employ analytical, optimal and algebraic control techniques to evaluate various quantum systems for their potential use in quantum information processing. In doing so, we have additionally identified several novel characterization procedures capable of probing both the coherent and incoherent dynamics of quantum systems. The first part of this thesis discusses work motivated by attempts to utilize donor qubits in silicon as quantum bits. We first propose a measurement of the state of a single donor electron spin using two-dimensional electron gas of a field-effect transistor and electrically detected magnetic resonance. We analyze the potential sensitivity of this measurement and show that it is a quantum nondemolition measurement of an electron-encoded state. We then present the first of two novel qubit characterization procedures. We consider the problem of rapidly characterizing a large number of similarly prepared qubits using techniques from optimal experiment design. All qubits are assumed to evolve according to the same physical processes, though the Hamiltonian parameters may vary from device to device - an inevitability in solid state qubits. We use the Cram\\'er-Rao bound on the variance of a point estimator to construct the optimal series of experiments to estimate these free parameters, and present a complete analysis of the optimal experimental configuration. Though applied to dipole- and exchange-coupled qubits, this technique is widely applicable to other systems. The second part of the thesis discusses the role that control can play in measuring and mitigating noise in qubit systems. Our first result describes a method for quickly simulating the effects of arbitrary markovian noise on qubit systems through the use of a numerically optimized, multi-state Markovian fluctuator. This ability to rapidly simulate the noisy qubit evolution allows us to compute control sequences capable of maximally decoupling the qubit from the noise source. We then introduce the second characterization procedure of the these, showing that a single measurable and controllable qubit may act as a spectrometer of dephasing noise. We show that the formalism of dynamical decoupling can be used to estimate the short-time correlation function of the noise source, while long time correlations may be estimated by a very simple series of free evolution experiments. This technique is applicable to the wide range of physical implementations which suffer from dephasing noise.The final part of this thesis demonstrates that trapped neutral atoms may be utilized for the robust simulation of complex systems exhibiting a topological phase. We present a method to simulate the toric code Hamiltonian stroboscopically, and demonstrate that our technique preserves the ground state degeneracy . Furthermore, we introduce a dissipative mechanism allowing for thermalization of the system to a finite temperature or direct cooling to the ground state manifold.
Quantum information processing offers potential improvements to a wide range \nof computing endevaors, including cryptography, chemistry simulations and \nmachine learning. The development of practical quantum information processing \ndevices is impeded, however, by challenges arising from the apparent exponential \ndimension of the space one must consider in characterizing quantum \nsystems, verifying their correct operation, and in designing useful control \nsequences. In this work, we address each in turn by providing useful \nalgorithms that can be readily applied in experimental practice. \n \nIn order to characterize the dynamics of quantum systems, we apply statistical \nmethods based on Bayes' rule, thus enabling the use of strong prior \ninformation and parameter reduction. We first discuss an \nanalytically-tractable special case, and then employ a numerical algorithm, \nsequential Monte Carlo, that uses simulation as a resource for characterization. We \ndiscuss several examples of SMC and show its application in nitrogen vacancy \ncenters and neutron interferometry. \nWe then discuss how characterization techniques such as SMC can be used to \nverify quantum systems by using credible region estimation, model selection, \nstate-space modeling and hyperparameterization. Together, these techniques \nallow us to reason about the validity of assumptions used in analyzing quantum \ndevices, and to bound the credible range of quantum dynamics. \n \nNext, we discuss the use of optimal control theory to design robust control \nfor quantum systems. We show extensions to existing OCT algorithms that allow \nfor including models of classical electronics as well as quantum dynamics, \nenabling higher-fidelity control to be designed for cutting-edge experimental \ndevices. Moreover, we show how control can be implemented in parallel across \nnode-based architectures, providing a valuable tool for implementing \nproposed fault-tolerant protocols. \n \nWe close by showing how these algorithms can be augmented using quantum \nsimulation resources to enable addressing characterization and control design \nchallenges in even large quantum devices. In particular, we will introduce a \nnovel genetic algorithm for quantum control design, MOQCA, that utilizes \nquantum coprocessors to design robust control sequences. Importantly, MOQCA is \nalso memetic, in that improvement is performed between genetic steps. We then \nextend sequential Monte Carlo with quantum simulation resources to enable \ncharacterizing and verifying the dynamics of large quantum devices. By using \nnovel insights in epistemic information locality, we are able to learn \ndynamics using strictly smaller simulators, leading to an algorithm we call \nquantum bootstrapping. We demonstrate by using a numerical example of learning \nthe dynamics of a 50-qubit device using an 8-qubit simulator.