Thin-film periodically poled lithium niobate (TF-PPLN) devices have recently gained prominence for efficient wavelength conversion processes in both classical and quantum applications. However, the patterning and poling of TF-PPLN devices today are mostly performed at chip scales, presenting a significant bottleneck for future large-scale nonlinear photonic systems that require the integration of multiple nonlinear components with consistent performance and low cost. Here, we take a pivotal step towards this goal by developing a wafer-scale TF-PPLN nonlinear photonic platform, leveraging ultraviolet stepper lithography and an automated poling process. To address the inhomogeneous broadening of the quasi-phase matching (QPM) spectrum induced by film thickness variations across the wafer, we propose and demonstrate segmented thermal optic tuning modules that can precisely adjust and align the QPM peak wavelengths in each section. Using the segmented micro-heaters, we show the successful realignment of inhomogeneously broadened multi-peak QPM spectra with up to 57% enhancement of conversion efficiency. We achieve a high normalized conversion efficiency of 3802% W−1 cm−2 in a 6 mm long PPLN waveguide, recovering 84% of the theoretically predicted efficiency in this device. The advanced fabrication techniques and segmented tuning architectures presented herein pave the way for wafer-scale integration of complex functional nonlinear photonic circuits with applications in quantum information processing, precision sensing and metrology, and low-noise-figure optical signal amplification.
Thin-film periodically poled lithium niobate (TF-PPLN) devices have recently gained prominence for efficient wavelength conversion processes in both classical and quantum applications. However, the patterning and poling of TF-PPLN devices today are mostly performed at chip scales, presenting a significant bottleneck for future large-scale nonlinear photonic systems that require the integration of multiple nonlinear components with consistent performance and low cost. Here, we take a pivotal step towards this goal by developing a wafer-scale TF-PPLN nonlinear photonic platform, leveraging ultraviolet stepper lithography and an automated poling process. To address the inhomogeneous broadening of the quasi-phase matching (QPM) spectrum induced by film thickness variations across the wafer, we propose and demonstrate segmented thermal optic tuning modules that can precisely adjust and align the QPM peak wavelengths in each section. Using the segmented micro-heaters, we show the successful realignment of inhomogeneously broadened multi-peak QPM spectra with up to 57% enhancement of conversion efficiency. We achieve a high normalized conversion efficiency of 3802% W−1 cm−2 in a 6 mm long PPLN waveguide, recovering 84% of the theoretically predicted efficiency in this device. The advanced fabrication techniques and segmented tuning architectures presented herein pave the way for wafer-scale integration of complex functional nonlinear photonic circuits with applications in quantum information processing, precision sensing and metrology, and low-noise-figure optical signal amplification.
Future quantum information networks operated on telecom channels require qubit transfer between different wavelengths while preserving quantum coherence and entanglement. Qubit transfer is a nonlinear optical process, but currently the types of atoms used for quantum information processing and storage are limited by the narrow bandwidth of up-conversion available. Here we present the first experimental demonstration of broadband and high-efficiency quasi-phase matching second harmonic generation (SHG) in a chip-scale periodically poled lithium niobate thin film. We achieve large bandwidth of up to 2 THz for SHG by satisfying quasi-phase matching and group-velocity matching simultaneously. Furthermore, by changing film thickness, the central wavelength of quasi-phase matching SHG bandwidth can be modulated from 2.70 um to 1.44 um. The reconfigurable quasi-phase matching lithium niobate thin film provides a significant on-chip integrated platform for photonics and quantum optics.
Abstract Integrated photon-pair sources are crucial for scalable photonic quantum systems. Thin-film lithium niobate is a promising platform for on-chip photon-pair generation through spontaneous parametric down-conversion (SPDC). However, the device implementation faces practical challenges. Periodically poled lithium niobate (PPLN), despite enabling flexible quasi-phase matching, suffers from poor fabrication reliability and device repeatability, while conventional modal phase matching (MPM) methods yield limited efficiencies due to inadequate mode overlaps. Here, we introduce a layer-poled lithium niobate (LPLN) nanophotonic waveguide for efficient photon-pair generation. It leverages layer-wise polarity inversion through electrical poling to break spatial symmetry and significantly enhance nonlinear interactions for MPM, achieving a notable normalized second-harmonic generation (SHG) conversion efficiency of 4615% W −1 cm −2 . Through a cascaded SHG and SPDC process, we demonstrate photon-pair generation with a normalized brightness of 3.1 × 10 6 Hz nm −1 mW −2 in a 3.3 mm long LPLN waveguide, surpassing existing on-chip sources under similar operating configurations. Crucially, our LPLN waveguides offer enhanced fabrication reliability and reduced sensitivity to geometric variations and temperature fluctuations compared to PPLN devices. We expect LPLN to become a promising solution for on-chip nonlinear wavelength conversion and non-classical light generation, with immediate applications in quantum communication, networking, and on-chip photonic quantum information processing.
Within the last decade, thin-film lithium niobate (TFLN) has emerged as a leading integrated photonics platform with immediate applications in classical communications. Concurrently, TFLN components tailored to the requirements of photonic quantum information processing have also garnered considerable interest. Chief among these is the quasi-phase matched (QPM) nonlinear frequency mixer—implemented via periodic domain inversion in ferroelectric lithium niobate—which can be used to generate photon pairs, squeezed states of light, and to perform single photon frequency conversion. Here, we demonstrate progress towards realizing a spectrally separable photon pair source in lithium niobate via waveguide dispersion engineering—a technique uniquely enabled by sub-wavelength optical mode confinement in the thin-film platform. Subsequently, we design optimize a scalable fabrication process to produce QPM TFLN devices for applications that require strict adherence to a specified operating wavelength, such as quantum frequency conversion in a quantum communications network. Finally, we explore how high-performance electro-optic devices can be combined with these nonlinear optical devices to realize a multi-functional platform in which quantum states of light can be generated and manipulated within a single, compact photonic integrated circuit.
Spontaneous parametric down conversion in nonlinear material is widely exploited to generate entangled photon pairs in quantum optics experiments and applications, including quantum computing and communication. Periodically poled thin film lithium niobate (PPTFLN) has emerged as a promising platform for efficient entangled photon pair generation, offering enhanced nonlinear interaction through quasi-phase matching (QPM) and tight confinement of light. However, achieving optimal performance requires careful control of the QPM condition since the waveguide in TFLN is highly dispersive to changes in the geometric parameter. In this study, we fabricate PPTFLN rib waveguides to generate entangled photon pairs at telecommunication wavelengths, varying geometric parameters. QPM condition is confirmed with the second harmonic generation experiments and Pair generation rate and coincidence-to-accidental count ratio are also estimated by temporal coincidence measurement. Digital etching process is introduced to control the QPM condition, resulting in incremental peak wavelength shift by discrete etching step. This is expected to contribute to synchronizing wavelength of quantum nodes.
Ion-sliced thin-film lithium niobate (LN) compact waveguide technology has facilitated the resurgence of integrated photonics based on lithium niobate. These thin-film LN waveguides offer over an order of magnitude improvement in optical confinement, and about two orders of magnitude reduction in waveguide bending radius, compared to conventional LN waveguides. Harnessing the improved confinement, a variety of miniaturized and efficient photonic devices are demonstrated in this work. First, two types of compact electrooptic modulators are presented – microring modulators, and Mach-Zehnder modulators. Next, two distinct approaches to nonlinear optical frequency converters are implemented – periodically poled lithium niobate, and mode shape modulation (grating assisted quasi-phase matching). Following this, stochastic variations are added to the mode shape modulation approach to demonstrate random quasi-phase matching. Afterward, broadband photon-pair generation is demonstrated in the miniaturized periodically poled lithium niobate, and spectral correlations of the biphoton spectrum are reported. Finally, extensions of the aforementioned results suitable for future work are discussed.
High-fidelity periodic poling of thin film lithium niobate (TFLN) waveguides is critical for robust, quasi-phase-matched three-wave mixing process such as second-harmonic generation and spontaneous parametric down conversion. Over the past decade, extensive research has been performed on design and fabrication of TFLN based optical waveguides, demonstrating high-performance electro-optic modulators, efficient wavelength converters and revealing their great potentials in heterogeneous integration with the conventional silicon photonic material platform. However, studies on poling of TFLN are still lacking, and uniformity of TFLN poling needs to be further improved, to achieve a comparable conversion efficiency as in its bulk counterparts. This dissertation discusses evaluation and optimization of TFLN poling, waveguide design, and device demonstration through characterization of efficient second-harmonic generation and high-quality entangled photon-pair generation. The results presented here indicate promising applications for robust and efficient TFLN devices in nonlinear and quantum optics in the telecommunications regime.