Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2312.09386

Efficient Superconductor Arithmetic Logic Unit for Ultra-Fast Computing

Sasan Razmkhah, Ali Bozbey

Published Dec 14, 2023• 0 citations
arXivHTMLPDF

Abstract

We present a 4-bit Arithmetic Logic Unit (ALU) utilizing superconductor technology. The ALU serves as the central processing unit of a processor, performing crucial arithmetic and logical operations. We have adopted a bit-parallel architecture to ensure an efficient and streamlined design with minimal fanin/fanout and optimal latency. In terms of fabrication, the ALU has been fabricated using a standard commercial process. It operates at an impressive clock frequency exceeding 30 GHz while consuming a mere 4.75 mW of power, including applied reverse current, encompassing static and dynamic components. The ALU contains over 9000 Josephson junctions, with approximately 7000 JJs dedicated to wiring, delay lines, and path balancing, and it has over 18% bias margin. Designed as a co-processor, this arithmetic logic unit will work with external CMOS memory and processors via interface circuits. Thorough testing and validation of the ALU's functionality have been conducted with digital and analog simulations, and all the components were fabricated and measured within a 4K pulse-tube cryocooler. Experimental verification has confirmed the successful operation of both the arithmetic and logic units. These results have been analyzed and are presented alongside the experimental data to provide comprehensive insights into the ALU's behavior and capabilities.

DOI
10.48550/arxiv.2312.09386

Related papers

Design of a superconducting ALU with a 3-input XOR gate

K. Takahashi, Shuichi Nagasawa, H. Hasegawa +3 more

In order to develop superconducting Digital Signal Processors (DSP's), we have been studying a superconducting 1-bit Arithmetic Logic Unit (ALU). This ALU has the simplest function of AND, OR, ADD (addition), and SUB (subtraction). The ALU operates in a 3-stage pipeline. All logic functions such as AND, OR, and SUM (summation) can be executed within a single stage of the pipeline. In order to achieve the high-speed operation of the ALU, we proposed and designed a novel 3-input XOR gate, which can operate in only one logic stage. Our simulation study showed that all components of the ALU can operate up to 50 GHz. These ALU components were fabricated and tested at low speed. Large bias margins of more than /spl plusmn/37% were achieved. The designed ALU's were laid out and fabricated with an Nb process. The ALU occupied the area of 1200 /spl mu/m /spl times/ 2600 /spl mu/m, which contains 560 Josephson junctions (JJ's).

IEEE Transactions on Applied Superconductivity•Jun 1, 2003•12 citations

ERSFQ 8-Bit Parallel Arithmetic Logic Unit

Alex F. Kirichenko, Igor V. Vernik, Michael Y. Kamkar +4 more

We have designed and tested a parallel 8-bit ERSFQ arithmetic logic unit (ALU). The ALU design employs wave-pipelined instruction execution and features modular bit-slice architecture that is easily extendable to any number of bits and adaptable to current recycling. A carry signal synchronized with an asynchronous instruction propagation provides the wave-pipeline operation of the ALU. The ALU instruction set consists of 14 arithmetical and logical instructions. It has been designed and simulated for operation up to a 10 GHz clock rate at the 10-kA/cm2fabrication process. The ALU is embedded into a shift-register-based high-frequency testbed with on-chip clock generator to allow for comprehensive high frequency testing for all possible operands. The 8-bit ERSFQ ALU, comprising 6840 Josephson junctions, has been fabricated with MIT Lincoln Lab's 10-kA/cm2SFQ5ee fabrication process featuring eight Nb wiring layers and a high-kinetic inductance layer needed for ERSFQ technology. We evaluated the bias margins for all instructions and various operands at both low and high frequency clock. At low frequency, clock and all instruction propagation through ALU were observed with bias margins of +/-11% and +/-9%, respectively. Also at low speed, the ALU exhibited correct functionality for all arithmetical and logical instructions with +/-6% bias margins. We tested the 8-bit ALU for all instructions up to 2.8 GHz clock frequency.

arXiv:1902.09500•IEEE Transactions on Applied Superconductivity•Mar 18, 2019•49 citations

4-bit Bit-Slice Arithmetic Logic Unit for 32-bit RSFQ Microprocessors

Guang-Ming Tang, Takata Kensuke, Masamitsu Tanaka +3 more

A 4-bit bit-slice arithmetic logic unit (ALU) for 32-bit rapid single-flux-quantum microprocessors was demonstrated. The proposed ALU covers all of the ALU operations for the MIPS32 instruction set. It processes bit-sliced 32-bit data that are divided into eight slices of 4 bits. The bit-slice approach simplifies the circuit structure and reduces the hardware cost. The ALU uses synchronous concurrent-flow clocking and consists of eight pipeline stages. It was implemented using the 1.0-μm Nb/AlOx/Nb nine-layer advanced process 2 (ADP2) with a critical current density of 10 kA/cm2, and fabricated by National Institute of Advanced Industrial Science and Technology (AIST). It consists of 3481 Josephson junctions with an area of 3.09 × 1.66 mm2. It achieved the target frequency of 50 GHz and a latency of 524 ps for a 32-bit operation, at the designed DC bias voltage of 2.5 mV, via precise control of interconnect delays and clock distribution. Furthermore, it achieved a throughput of 6.25 × 10932-bit operations per second. All the correct ALU operations with measured DC bias voltage margins of around 10% at 50 GHz were successfully obtained. The proposed ALU can be used for any 4n-bit processing.

IEEE Transactions on Applied Superconductivity•Dec 10, 2015•66 citations

Timing analysis of RSFQ ALU circuit for the development of superconductive microprocessor

Kim J. Y, Seokhyeon Baek, S H Kim +1 more

We have constructed an RSFQ 4-bit Arithmetic Logic Unit (ALU) in a pipelined structure. An ALU is a core element of a computer processor that performs arithmetic and logic operation on the operands in computer instruction words. We have simulated the circuit by using Josephson circuit simulation tools. We used simulation tools of XIC, , and Julia. To make the circuit work faster, we used a forward clocking scheme. This required a careful design of timing between clock and data pulses in ALU. The RSFQ 1-bit block of ALU used in constructing the 4-bit ALU was consisted of three DC current driven SFQ switches and a half-adder. By commutating output ports of the half adder, we could produce AND, OR, XOR, or ADD functions. The circuit size of the 4-bit ALU when fabricated was 3 mm x 1.5 mm, fitting in a 5 mm x 5mm chip. The fabricated 4-bit ALU operated correctly at 5 GHz clock frequency. The chip was tested at the liquid-helium temperature.

Progress in Superconductivity and Cryogenics•Jan 1, 2005•0 citations

8-Bit Asynchronous Sparse-Tree Superconductor RSFQ Arithmetic-Logic Unit With a Rich Set of Operations

M. Dorojevets, Christopher Lawrence Ayala, Nobuyuki Yoshikawa +1 more

This paper describes the design and testing of an 8-bit asynchronous wave-pipelined sparse-tree Rapid Single Flux Quantum (RSFQ) Arithmetic Logic Unit (ALU). Compared to previously developed RSFQ ALUs, this unit features an extensive set of 8 arithmetic and 12 logical operations. The execution of ALU operations consists of two steps. First, when necessary, one or both operands are inverted, and then operations are performed on these pre-processed data. Unlike the RSFQ Kogge-Stone-based designs, our parallel-prefix sparse-tree ALU has significantly reduced circuit complexity while maintaining robust operational margins at high frequency. An 8-bit ALU has been implemented with the International Superconductivity Technology Center (ISTEC) 10 kA/cm21.0 μm 9-metal ADP2.1 fabrication process as a joint effort between Stony Brook University, Yokohama National University, and Nagoya University. Using the CONNECT cell library and SFQ CAD tools developed at Nagoya and Yokohama, the Stony Brook team has developed a complete logical and physical design of the ALU chip. The 8-bit ALU core (without SFQ-to-dc and dc-to-SFQ converters) consists of 8832 Josephson junctions with an area of 7.2 mm2. Simulations show that the ALU can operate at the maximum rate of 42 GHz. It has the latency of 374 ps at a bias voltage of 2.5 mV. The chip was fabricated and tested at low frequency in 2012. Testing results showed malfunctioning of some gates but despite these shortcomings we still verified several ALU operations with the measured DC bias voltage margins of ±1.8%.

IEEE Transactions on Applied Superconductivity•Nov 21, 2012•35 citations

A superconducting unary arithmetic logic unit with ultra-low hardware cost

Zeyu Han, Nobuyuki Yoshikawa, Yuki Yamanashi

Abstract Single-flux-quantum (SFQ) circuits are promising candidates for post-Moore integrated circuits owing to their ultra-high-speed operation and low power consumption. However, limitations in current superconducting fabrication processes pose significant challenges to achieving area-efficient SFQ-based microprocessors, particularly in the design of compact arithmetic logic units (ALUs). Unary computing enables arithmetic operations using extremely simple logic, but typically suffers from long computation latency. This paper focuses on unary computing for superconducting circuits that exploits the complementary characteristics of SFQ logic and unary computing. The ultra-high-speed nature of SFQ circuits compensates for the inherent latency of unary computation, while unary computing enables an ultra-low hardware cost by substantially reducing circuit complexity. Based on this concept, we introduce a unary computing methodology tailored for SFQ circuits and design a superconducting unary ALU with ultra-low hardware cost. The proposed ALU requires only 183 Josephson junctions (JJs), achieving approximately 88.2% reduction in JJ count and 80.4% reduction in area compared with a conventional bit-serial SFQ ALU. The proposed design, including binary-to-unary and unary-to-binary converters, was fabricated using a 10 kA cm −2 Nb four-layer superconducting circuit fabrication process and experimentally verified to operate correctly at approximately 72 GHz. The total power consumption at this frequency is approximately 58.9 µ W. This work quantitatively demonstrates the effectiveness of combining unary computing with SFQ circuits for ultra-low-cost processing systems and provides superconducting circuits as a new design option for alternative computation paradigms, such as unary computing.

Superconductor Science and Technology•Jun 5, 2026•0 citations
We present a 4-bit Arithmetic Logic Unit (ALU) utilizing superconductor technology. The ALU serves as the central processing unit of a processor, performing crucial arithmetic and logical operations. We have adopted a bit-parallel architecture to ensure an efficient and streamlined design with minimal fanin/fanout and optimal latency. In terms of fabrication, the ALU has been fabricated using a standard commercial process. It operates at an impressive clock frequency exceeding 30 GHz while consuming a mere 4.75 mW of power, including applied reverse current, encompassing static and dynamic components. The ALU contains over 9000 Josephson junctions, with approximately 7000 JJs dedicated to wiring, delay lines, and path balancing, and it has over 18% bias margin. Designed as a co-processor, this arithmetic logic unit will work with external CMOS memory and processors via interface circuits. Thorough testing and validation of the ALU's functionality have been conducted with digital and analog simulations, and all the components were fabricated and measured within a 4K pulse-tube cryocooler. Experimental verification has confirmed the successful operation of both the arithmetic and logic units. These results have been analyzed and are presented alongside the experimental data to provide comprehensive insights into the ALU's behavior and capabilities.
In order to develop superconducting Digital Signal Processors (DSP's), we have been studying a superconducting 1-bit Arithmetic Logic Unit (ALU). This ALU has the simplest function of AND, OR, ADD (addition), and SUB (subtraction). The ALU operates in a 3-stage pipeline. All logic functions such as AND, OR, and SUM (summation) can be executed within a single stage of the pipeline. In order to achieve the high-speed operation of the ALU, we proposed and designed a novel 3-input XOR gate, which can operate in only one logic stage. Our simulation study showed that all components of the ALU can operate up to 50 GHz. These ALU components were fabricated and tested at low speed. Large bias margins of more than /spl plusmn/37% were achieved. The designed ALU's were laid out and fabricated with an Nb process. The ALU occupied the area of 1200 /spl mu/m /spl times/ 2600 /spl mu/m, which contains 560 Josephson junctions (JJ's).
We have designed and tested a parallel 8-bit ERSFQ arithmetic logic unit (ALU). The ALU design employs wave-pipelined instruction execution and features modular bit-slice architecture that is easily extendable to any number of bits and adaptable to current recycling. A carry signal synchronized with an asynchronous instruction propagation provides the wave-pipeline operation of the ALU. The ALU instruction set consists of 14 arithmetical and logical instructions. It has been designed and simulated for operation up to a 10 GHz clock rate at the 10-kA/cm2fabrication process. The ALU is embedded into a shift-register-based high-frequency testbed with on-chip clock generator to allow for comprehensive high frequency testing for all possible operands. The 8-bit ERSFQ ALU, comprising 6840 Josephson junctions, has been fabricated with MIT Lincoln Lab's 10-kA/cm2SFQ5ee fabrication process featuring eight Nb wiring layers and a high-kinetic inductance layer needed for ERSFQ technology. We evaluated the bias margins for all instructions and various operands at both low and high frequency clock. At low frequency, clock and all instruction propagation through ALU were observed with bias margins of +/-11% and +/-9%, respectively. Also at low speed, the ALU exhibited correct functionality for all arithmetical and logical instructions with +/-6% bias margins. We tested the 8-bit ALU for all instructions up to 2.8 GHz clock frequency.
A 4-bit bit-slice arithmetic logic unit (ALU) for 32-bit rapid single-flux-quantum microprocessors was demonstrated. The proposed ALU covers all of the ALU operations for the MIPS32 instruction set. It processes bit-sliced 32-bit data that are divided into eight slices of 4 bits. The bit-slice approach simplifies the circuit structure and reduces the hardware cost. The ALU uses synchronous concurrent-flow clocking and consists of eight pipeline stages. It was implemented using the 1.0-μm Nb/AlOx/Nb nine-layer advanced process 2 (ADP2) with a critical current density of 10 kA/cm2, and fabricated by National Institute of Advanced Industrial Science and Technology (AIST). It consists of 3481 Josephson junctions with an area of 3.09 × 1.66 mm2. It achieved the target frequency of 50 GHz and a latency of 524 ps for a 32-bit operation, at the designed DC bias voltage of 2.5 mV, via precise control of interconnect delays and clock distribution. Furthermore, it achieved a throughput of 6.25 × 10932-bit operations per second. All the correct ALU operations with measured DC bias voltage margins of around 10% at 50 GHz were successfully obtained. The proposed ALU can be used for any 4n-bit processing.
We have constructed an RSFQ 4-bit Arithmetic Logic Unit (ALU) in a pipelined structure. An ALU is a core element of a computer processor that performs arithmetic and logic operation on the operands in computer instruction words. We have simulated the circuit by using Josephson circuit simulation tools. We used simulation tools of XIC, , and Julia. To make the circuit work faster, we used a forward clocking scheme. This required a careful design of timing between clock and data pulses in ALU. The RSFQ 1-bit block of ALU used in constructing the 4-bit ALU was consisted of three DC current driven SFQ switches and a half-adder. By commutating output ports of the half adder, we could produce AND, OR, XOR, or ADD functions. The circuit size of the 4-bit ALU when fabricated was 3 mm x 1.5 mm, fitting in a 5 mm x 5mm chip. The fabricated 4-bit ALU operated correctly at 5 GHz clock frequency. The chip was tested at the liquid-helium temperature.
This paper describes the design and testing of an 8-bit asynchronous wave-pipelined sparse-tree Rapid Single Flux Quantum (RSFQ) Arithmetic Logic Unit (ALU). Compared to previously developed RSFQ ALUs, this unit features an extensive set of 8 arithmetic and 12 logical operations. The execution of ALU operations consists of two steps. First, when necessary, one or both operands are inverted, and then operations are performed on these pre-processed data. Unlike the RSFQ Kogge-Stone-based designs, our parallel-prefix sparse-tree ALU has significantly reduced circuit complexity while maintaining robust operational margins at high frequency. An 8-bit ALU has been implemented with the International Superconductivity Technology Center (ISTEC) 10 kA/cm21.0 μm 9-metal ADP2.1 fabrication process as a joint effort between Stony Brook University, Yokohama National University, and Nagoya University. Using the CONNECT cell library and SFQ CAD tools developed at Nagoya and Yokohama, the Stony Brook team has developed a complete logical and physical design of the ALU chip. The 8-bit ALU core (without SFQ-to-dc and dc-to-SFQ converters) consists of 8832 Josephson junctions with an area of 7.2 mm2. Simulations show that the ALU can operate at the maximum rate of 42 GHz. It has the latency of 374 ps at a bias voltage of 2.5 mV. The chip was fabricated and tested at low frequency in 2012. Testing results showed malfunctioning of some gates but despite these shortcomings we still verified several ALU operations with the measured DC bias voltage margins of ±1.8%.
Abstract Single-flux-quantum (SFQ) circuits are promising candidates for post-Moore integrated circuits owing to their ultra-high-speed operation and low power consumption. However, limitations in current superconducting fabrication processes pose significant challenges to achieving area-efficient SFQ-based microprocessors, particularly in the design of compact arithmetic logic units (ALUs). Unary computing enables arithmetic operations using extremely simple logic, but typically suffers from long computation latency. This paper focuses on unary computing for superconducting circuits that exploits the complementary characteristics of SFQ logic and unary computing. The ultra-high-speed nature of SFQ circuits compensates for the inherent latency of unary computation, while unary computing enables an ultra-low hardware cost by substantially reducing circuit complexity. Based on this concept, we introduce a unary computing methodology tailored for SFQ circuits and design a superconducting unary ALU with ultra-low hardware cost. The proposed ALU requires only 183 Josephson junctions (JJs), achieving approximately 88.2% reduction in JJ count and 80.4% reduction in area compared with a conventional bit-serial SFQ ALU. The proposed design, including binary-to-unary and unary-to-binary converters, was fabricated using a 10 kA cm −2 Nb four-layer superconducting circuit fabrication process and experimentally verified to operate correctly at approximately 72 GHz. The total power consumption at this frequency is approximately 58.9 µ W. This work quantitatively demonstrates the effectiveness of combining unary computing with SFQ circuits for ultra-low-cost processing systems and provides superconducting circuits as a new design option for alternative computation paradigms, such as unary computing.