Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2312.04331 · Applied Physics Letters

Demonstration of high-impedance superconducting NbRe Dayem bridges

S. Battisti, J. Koch, Alessandro Paghi, Leon Ruf, ARMEN M. GULIAN, Serafim Teknowijoyo, C. Cirillo, Z. Makhdoumi Kakhaki, C. Attanasio, Elke Scheer, Angelo Di Bernardo, Giorgio De Simoni, Francesco Giazotto

Published Apr 22, 2024• 3 citations
arXivHTMLPDF

Abstract

Here, we demonstrate superconducting Dayem-bridge weak-links made of different stoichiometric compositions of NbRe. Our devices possess a relatively high critical temperature, normal-state resistance, and kinetic inductance. In particular, the high kinetic inductance makes this material a good alternative to more conventional niobium-based superconductors (e.g., NbN or NbTiN) for the realization of superinductors and high-quality factor resonators, whereas the high normal-state resistance yields a large output voltage in superconducting switches and logic elements realized upon this compound. Moreover, out-of-plane critical magnetic fields exceeding 2 T ensure that possible applications requiring high magnetic fields can also be envisaged. Altogether, these features make this material appealing for a number of applications in the framework of quantum technologies.

DOI
10.1063/5.0200257

Related papers

Magnetic field resilient high kinetic inductance superconducting niobium nitride coplanar waveguide resonators

Cécile Xinqing Yu, Simon Zihlmann, Gonzalo Troncoso Fernández-Bada +4 more

We characterize niobium nitride (NbN) λ/2 coplanar waveguide resonators, which were fabricated from a 10-nm-thick film on silicon dioxide grown by sputter deposition. For films grown at 180 °C, we report a superconducting critical temperature of 7.4 K associated with a normal square resistance of 1 kΩ, leading to a kinetic inductance of 192 pH/◻. We fabricated resonators with a characteristic impedance up to 4.1 kΩ and internal quality factors Qi>104 in the single photon regime at zero magnetic field. Moreover, in the many photon regime, the resonators present a high magnetic field resilience with Qi>104 in a 6 T in-plane magnetic field and in a 300 mT out-of-plane magnetic field. These findings make such resonators a compelling choice for circuit quantum electrodynamics experiments involving quantum systems with small electric dipole moments operated in finite magnetic fields.

arXiv:2012.04366•Applied Physics Letters•Feb 1, 2021•66 citations

Magnetic-field-resilient high-impedance high-kinetic-inductance superconducting resonators

C. Roy, S. Frasca, Pasquale Scarlino

Superconducting resonators with high-kinetic inductance play a central role in hybrid quantum circuits, enabling strong coupling with quantum systems with small electric dipole moment and improved parametric amplification. However, optimizing these resonators simultaneously for high internal quality factors ($Q_i$) and resilience to strong magnetic fields remains challenging. In this study, we systematically compare superconducting resonators fabricated from niobium nitride (NbN) and granular aluminum (grAl) thin films, each having similar kinetic inductance values ($L_k \sim 100$ pH/sq). At zero magnetic field, resonators made from grAl exhibit higher $Q_i$ compared to their NbN counterparts. However, under applied magnetic fields, NbN resonators demonstrate significantly better resilience. Moreover, NbN resonators exhibit an unexpected increase in $Q_i$ at intermediate in-plane magnetic fields ($B_{\parallel} \sim 1$ T), which we attribute to an enhanced frequency detuning that reduce coupling to two-level system defects. In contrast, grAl resonators show a distinct critical field above which $Q_i$ rapidly decreases, strongly depending on resonator cross-section respect to the applied field direction. Characterization of the nonlinear properties at zero magnetic field reveals that the self-Kerr coefficient in grAl resonators is more than an order of magnitude higher than in NbN resonators, making grAl particularly attractive for applications requiring pronounced nonlinear interactions. Our findings illustrate a clear trade-off between the two materials: NbN offers superior magnetic-field resilience beneficial for hybrid circuit quantum electrodynamics applications, while grAl is more advantageous in low-field regimes demanding high impedance and strong nonlinearity.

arXiv:2503.13321•Physical Review Applied•Dec 17, 2025•10 citations

Ultra-Efficient Superconducting Dayem Bridge Field-Effect Transistor

Federico Paolucci, Giorgio De Simoni, Elia Strambini +2 more

Superconducting field-effect transitor (SuFET) and Josephson field-effect transistor (JoFET) technologies take advantage of electric-field-induced control of charge-carrier concentration to modulate the channel superconducting properties. Despite the fact that the field-effect is believed to be ineffective for superconducting metals, recent experiments showed electric-field-dependent modulation of the critical current ( I C ) in a fully metallic transistor. However, the grounding mechanism of this phenomenon is not completely understood. Here, we show the experimental realization of Ti-based Dayem bridge field-effect transistors (DB–FETs) able to control the I C of the superconducting channel. Our easy fabrication process for DB–FETs show symmetric full suppression of I C for applied critical gate voltages as low as V G C ≃ ±8 V at temperatures reaching about the 85% of the record critical temperature, T C ≃ 550 mK, for titanium. The gate-independent T C and normal-state resistance ( R N ) coupled with the increase of resistance in the superconducting state ( R S ) for gate voltages close to the critical value ( V G C ) suggest the creation of field-effect induced metallic puddles in the superconducting sea. Our devices show extremely high values of transconductance (| g m MAX | ≃ 15 μA/V at V G ≃ ±6.5 V) and variations of Josephson kinetic inductance ( L K ) with V G of 2 orders of magnitude. Therefore, the DB–FET appears as an ideal candidate for the realization of superconducting electronics, superconducting qubits, and tunable interferometers as well as photon detectors.

arXiv:1803.04925•Nano Letters•Jun 12, 2018•65 citations

NbN films with high kinetic inductance for high-quality compact superconducting resonators

Simone Frasca, Ivo Arabadzhiev, Sebastien Yves Bros de Puechredon +7 more

Niobium nitride ($\mathrm{Nb}\mathrm{N}$) is a particularly promising material for quantum technology applications, as it shows the degree of reproducibility necessary for large-scale superconducting circuits. We demonstrate that resonators based on $\mathrm{Nb}\mathrm{N}$ thin films present a one-photon internal quality factor above ${10}^{5}$ maintaining a high impedance (larger than $2\mathrm{k}\mathrm{\ensuremath{\Omega}}$), with a footprint of approximately $50\ifmmode\times\else\texttimes\fi{}100\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}{\mathrm{m}}^{2}$ and a Kerr nonlinearity of few tenths of a hertz. These quality factors, mostly limited by losses induced by the coupling to two-level systems, have been maintained for kinetic inductances ranging from tenths to hundreds of picoHenry per square. We also demonstrate minimal variations in the performance of the resonators during multiple cooldowns over more than nine months. Our work proves the versatility of niobium nitride high-kinetic-inductance resonators, opening perspectives towards the fabrication of compact, high-impedance, and high-quality multimode circuits, with sizable interactions.

arXiv:2302.13930•Physical Review Applied•Oct 9, 2023•47 citations

Dynamics of gate-controlled superconducting Dayem bridges

François Joint, Kazi Rafsanjani Amin, Ivo P. C. Cools +1 more

Local control of superconducting circuits by high-impedance electrical gates offers potential advantages in superconducting logic, quantum processing units, and cryoelectronics. Recent experiments have reported gate-controlled supercurrent in Dayem bridges made of metallic superconductors, mediated by direct current leakage, out-of-equilibrium phonons, or possibly other mechanisms. However, a time-domain characterization of this effect has been lacking. Here, we integrate Dayem bridges made of niobium on silicon into coplanar waveguide resonators and measure the effect of the gate voltage at steady state and during pulsed operation. We consider two types of arrangements for the gate: a side-coupled gate and a remote injector. In both cases, we observe sizable changes in the real and the imaginary part of the constriction's impedance for gate voltages of the order of 1 V. However, we find striking differences in the time-domain dynamics, with the remote injector providing a faster and more controlled response. Our results contribute to our understanding of gate-controlled superconducting devices and their suitability for applications.

arXiv:2405.07377•Applied Physics Letters•Aug 26, 2024•6 citations

High-impedance spirals in superconducting devices

Mihirangi Medahinne, Machiel Blok

High-impedance quantum circuit elements consisting of large inductors with small self-capacitance, are important building blocks in quantum circuit elements, with many potential applications. We present thin-film niobium (Nb) spiral resonators exhibiting large geometric inductance, high critical magnetic fields, and high single-photon quality factors. These low-loss geometric inductors can be a compelling alternative to kinetic inductors to create high-impedance superconducting devices for applications that require magnetic fields. We measure the temperature and magnetic-field-dependent losses and find that the high-impedance resonators maintain an intrinsic quality factor above approximately 105 for parallel magnetic fields of up to 1 T. These properties make spiral Nb resonators a promising candidate for quantum devices that require circuit elements with high impedance and magnetic-field resilience. The quantum device we present, incorporating these spirals, is the inductively shunted transmon qudit. The transmon is a widely used superconducting qubit. We develop and optimize a fabrication procedure for transmons, and our primary qubit measurements indicate that we have successfully fabricated qubits. We develop and optimize a fabrication procedure for transmons with Al/AlOx/Al Josephson junctions. For the rest of the circuit, we start with Nb and then shift to Ta due to its superior material properties and the more feasible fabrication procedure it allows using our existing fabrication capabilities. Finally, we introduce the inductively shunted transmon, a transmon shunted by a linear inductor. We show numerically that it could provide highly coherent qudit operations. Then, we propose a simple design to shunt the previously introduced spirals to the transmons.

•Jan 1, 2025•0 citations
Here, we demonstrate superconducting Dayem-bridge weak-links made of different stoichiometric compositions of NbRe. Our devices possess a relatively high critical temperature, normal-state resistance, and kinetic inductance. In particular, the high kinetic inductance makes this material a good alternative to more conventional niobium-based superconductors (e.g., NbN or NbTiN) for the realization of superinductors and high-quality factor resonators, whereas the high normal-state resistance yields a large output voltage in superconducting switches and logic elements realized upon this compound. Moreover, out-of-plane critical magnetic fields exceeding 2 T ensure that possible applications requiring high magnetic fields can also be envisaged. Altogether, these features make this material appealing for a number of applications in the framework of quantum technologies.
We characterize niobium nitride (NbN) λ/2 coplanar waveguide resonators, which were fabricated from a 10-nm-thick film on silicon dioxide grown by sputter deposition. For films grown at 180 °C, we report a superconducting critical temperature of 7.4 K associated with a normal square resistance of 1 kΩ, leading to a kinetic inductance of 192 pH/◻. We fabricated resonators with a characteristic impedance up to 4.1 kΩ and internal quality factors Qi>104 in the single photon regime at zero magnetic field. Moreover, in the many photon regime, the resonators present a high magnetic field resilience with Qi>104 in a 6 T in-plane magnetic field and in a 300 mT out-of-plane magnetic field. These findings make such resonators a compelling choice for circuit quantum electrodynamics experiments involving quantum systems with small electric dipole moments operated in finite magnetic fields.
Superconducting resonators with high-kinetic inductance play a central role in hybrid quantum circuits, enabling strong coupling with quantum systems with small electric dipole moment and improved parametric amplification. However, optimizing these resonators simultaneously for high internal quality factors (QiQ_iQi​) and resilience to strong magnetic fields remains challenging. In this study, we systematically compare superconducting resonators fabricated from niobium nitride (NbN) and granular aluminum (grAl) thin films, each having similar kinetic inductance values (Lk∼100L_k \sim 100Lk​∼100 pH/sq). At zero magnetic field, resonators made from grAl exhibit higher QiQ_iQi​ compared to their NbN counterparts. However, under applied magnetic fields, NbN resonators demonstrate significantly better resilience. Moreover, NbN resonators exhibit an unexpected increase in QiQ_iQi​ at intermediate in-plane magnetic fields (B∥∼1B_{\parallel} \sim 1B∥​∼1 T), which we attribute to an enhanced frequency detuning that reduce coupling to two-level system defects. In contrast, grAl resonators show a distinct critical field above which QiQ_iQi​ rapidly decreases, strongly depending on resonator cross-section respect to the applied field direction. Characterization of the nonlinear properties at zero magnetic field reveals that the self-Kerr coefficient in grAl resonators is more than an order of magnitude higher than in NbN resonators, making grAl particularly attractive for applications requiring pronounced nonlinear interactions. Our findings illustrate a clear trade-off between the two materials: NbN offers superior magnetic-field resilience beneficial for hybrid circuit quantum electrodynamics applications, while grAl is more advantageous in low-field regimes demanding high impedance and strong nonlinearity.
Superconducting field-effect transitor (SuFET) and Josephson field-effect transistor (JoFET) technologies take advantage of electric-field-induced control of charge-carrier concentration to modulate the channel superconducting properties. Despite the fact that the field-effect is believed to be ineffective for superconducting metals, recent experiments showed electric-field-dependent modulation of the critical current ( I C ) in a fully metallic transistor. However, the grounding mechanism of this phenomenon is not completely understood. Here, we show the experimental realization of Ti-based Dayem bridge field-effect transistors (DB–FETs) able to control the I C of the superconducting channel. Our easy fabrication process for DB–FETs show symmetric full suppression of I C for applied critical gate voltages as low as V G C ≃ ±8 V at temperatures reaching about the 85% of the record critical temperature, T C ≃ 550 mK, for titanium. The gate-independent T C and normal-state resistance ( R N ) coupled with the increase of resistance in the superconducting state ( R S ) for gate voltages close to the critical value ( V G C ) suggest the creation of field-effect induced metallic puddles in the superconducting sea. Our devices show extremely high values of transconductance (| g m MAX | ≃ 15 μA/V at V G ≃ ±6.5 V) and variations of Josephson kinetic inductance ( L K ) with V G of 2 orders of magnitude. Therefore, the DB–FET appears as an ideal candidate for the realization of superconducting electronics, superconducting qubits, and tunable interferometers as well as photon detectors.
Niobium nitride (NbN\mathrm{Nb}\mathrm{N}NbN) is a particularly promising material for quantum technology applications, as it shows the degree of reproducibility necessary for large-scale superconducting circuits. We demonstrate that resonators based on NbN\mathrm{Nb}\mathrm{N}NbN thin films present a one-photon internal quality factor above 105{10}^{5}105 maintaining a high impedance (larger than $2\mathrm{k}\mathrm{\ensuremath{\Omega}}$), with a footprint of approximately $50\ifmmode\times\else\texttimes\fi{}100\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}{\mathrm{m}}^{2}$ and a Kerr nonlinearity of few tenths of a hertz. These quality factors, mostly limited by losses induced by the coupling to two-level systems, have been maintained for kinetic inductances ranging from tenths to hundreds of picoHenry per square. We also demonstrate minimal variations in the performance of the resonators during multiple cooldowns over more than nine months. Our work proves the versatility of niobium nitride high-kinetic-inductance resonators, opening perspectives towards the fabrication of compact, high-impedance, and high-quality multimode circuits, with sizable interactions.
Local control of superconducting circuits by high-impedance electrical gates offers potential advantages in superconducting logic, quantum processing units, and cryoelectronics. Recent experiments have reported gate-controlled supercurrent in Dayem bridges made of metallic superconductors, mediated by direct current leakage, out-of-equilibrium phonons, or possibly other mechanisms. However, a time-domain characterization of this effect has been lacking. Here, we integrate Dayem bridges made of niobium on silicon into coplanar waveguide resonators and measure the effect of the gate voltage at steady state and during pulsed operation. We consider two types of arrangements for the gate: a side-coupled gate and a remote injector. In both cases, we observe sizable changes in the real and the imaginary part of the constriction's impedance for gate voltages of the order of 1 V. However, we find striking differences in the time-domain dynamics, with the remote injector providing a faster and more controlled response. Our results contribute to our understanding of gate-controlled superconducting devices and their suitability for applications.
High-impedance quantum circuit elements consisting of large inductors with small self-capacitance, are important building blocks in quantum circuit elements, with many potential applications. We present thin-film niobium (Nb) spiral resonators exhibiting large geometric inductance, high critical magnetic fields, and high single-photon quality factors. These low-loss geometric inductors can be a compelling alternative to kinetic inductors to create high-impedance superconducting devices for applications that require magnetic fields. We measure the temperature and magnetic-field-dependent losses and find that the high-impedance resonators maintain an intrinsic quality factor above approximately 105 for parallel magnetic fields of up to 1 T. These properties make spiral Nb resonators a promising candidate for quantum devices that require circuit elements with high impedance and magnetic-field resilience. The quantum device we present, incorporating these spirals, is the inductively shunted transmon qudit. The transmon is a widely used superconducting qubit. We develop and optimize a fabrication procedure for transmons, and our primary qubit measurements indicate that we have successfully fabricated qubits. We develop and optimize a fabrication procedure for transmons with Al/AlOx/Al Josephson junctions. For the rest of the circuit, we start with Nb and then shift to Ta due to its superior material properties and the more feasible fabrication procedure it allows using our existing fabrication capabilities. Finally, we introduce the inductively shunted transmon, a transmon shunted by a linear inductor. We show numerically that it could provide highly coherent qudit operations. Then, we propose a simple design to shunt the previously introduced spirals to the transmons.