In the quest for fault-tolerant quantum computation using superconducting processors, accurate performance assessment and continuous design optimization stands at the forefront. To facilitate both meticulous simulation and streamlined design optimization, we introduce a multi-level simulation framework that spans both Hamiltonian and quantum error correction levels, and is equipped with the capability to compute gradients efficiently. This toolset aids in design optimization, tailored to specific objectives like quantum memory performance. Within our framework, we investigate the often-neglected spatially correlated unitary errors, highlighting their significant impact on logical error rates. We exemplify our approach through the multi-path coupling scheme of fluxonium qubits.
In the quest for fault-tolerant quantum computation using superconducting processors, accurate performance assessment and continuous design optimization stands at the forefront. To facilitate both meticulous simulation and streamlined design optimization, we introduce a multi-level simulation framework that spans both Hamiltonian and quantum error correction levels, and is equipped with the capability to compute gradients efficiently. This toolset aids in design optimization, tailored to specific objectives like quantum memory performance. Within our framework, we investigate the often-neglected spatially correlated unitary errors, highlighting their significant impact on logical error rates. We exemplify our approach through the multi-path coupling scheme of fluxonium qubits.
Due to very high projected error rates, large scale quantum computers will require substantial fault tolerance just to maintain a minimum level of reliability. We present tools to better analyze the performance of large, fault tolerant quantum computer designs. We find that current uses of quantum error correction are overly conservative in mitigating the impact of gate errors and negligent of other error sources in quantum data communication and memory.
We have developed circuit layout heuristics to generate detailed designs in trapped ion quantum computing technology. From these designs, we can extract much more accurate error models for a given application, including all gate, movement and idle errors on qubits. Using these extracted models, our flexible error simulation environment determines the overall failure probability of the design. Included in this simulation environment is a bit-parallel Monte Carlo technique that is 10 times faster than previous fault propagation simulations. This allows us to evaluate the reliability of designs that are an order of magnitude larger, in the same amount of time.
Using this analysis framework to verify reliability, we have developed a linear programming-based optimization for error correction which decreases overall circuit resources by an order of magnitude. In some cases, our optimization actually improves overall system reliability by removing error correction. We combine this optimization with judicious quantum error correcting code selection to provide efficient designs for large quantum arithmetic kernels used in Shor's factorization algorithm. We show our optimized designs perform 2x to 100x better than previous works in terms of probabilistic area-delay product. Additionally, the area of our layout of a 1024-bit factoring using Shor's algorithm is 64cm2, a substantial improvement compared to the 0.9m2 state-of-the-art design from prior work. A design size reduction by this amount will make fabricating such an application feasible much sooner.
Current quantum processors are fragile, noisy and fairly limited in both quantity and quality with tens of qubits and physical error rates of around 10^-3. To realize practical quantum applications, however, error rates need to be below 10^-15 across millions of qubits. To bridge this gap and fully harness the potential of quantum computers, quantum error correction (QEC) is essential. QEC codes are designed to protect quantum information by redundantly encoding it onto multiple physical qubits. This encoding allows for the detection and correction of local errors affecting individual qubits, e.g., through stabilizer measurements. Importantly, if the physical error rates are below a specific threshold, QEC codes can exponentially suppress logical error rates by increasing the number of physical qubits involved. This is essential for achieving fault-tolerant computations, which are key to unlocking the full potential of quantum computers. The work presented in this thesis focuses on the implementation and optimization of small-scale QEC experiments using the surface code and flux-tunable superconducting qubits (Transmons). It addresses several key challenges: enhancing two-qubit gate fidelity in Surface-4 (Chapter 2), implementing an error-detection code with Surface-7 (Chapter 3), automating the calibration and benchmarking of the building blocks in Surface-17 (Chapter 4), reducing leakage into higher excited states with leakage reduction units (Chapter 5), assessing and enhancing the performance of logical qubits (Chapters 7 and 8).
Quantum computing is transitioning from laboratory research to industrial deployment, yet significant challenges persist: system scalability and performance, fabrication yields, and the advancement of algorithms and applications. We emphasize that in building quantum computers -- spanning quantum chips, system integration, instruction sets, algorithms, and middleware such as quantum error correction schemes -- design is everywhere. In this paper, we advocate for a holistic design perspective in quantum computing, a perspective we argue is pivotal to unlocking innovative co-design opportunities and addressing the aforementioned key challenges. To equip readers with sufficient background for exploring co-optimization opportunities, we detail how interconnected computational methods and tools collaborate to enable end-to-end quantum computer design. This coverage encompasses critical stages -- such as chip layout design automation, high-fidelity system-level simulation, Hamiltonian derivation for quantum system modeling, control pulse simulation, decoherence analysis, and physical verification and testing -- followed by quantum instruction set design. We then proceed to quantum system and software development, including quantum circuit synthesis, quantum error correction and fault tolerance, and logic verification and testing. Through these discussions, we illustrate with concrete examples -- including co-optimizing quantum instruction sets with algorithmic considerations, customizing error correction circuits to hardware-specific constraints, and streamlining quantum chip design through tailored code design, among others. We hope that the detailed end-to-end design workflow as well as these examples will foster dialogue between the hardware and software communities, ultimately facilitating the translation of meaningful research findings into future quantum hardware implementations.
Quantum computation faces significant challenges due to the inherent fragility of quantum states and the susceptibility of qubits to environmental noise. Achieving fault-tolerant quantum computation necessitates robust error correction strategies. This paper proposes a novel self-correcting hardware-software co-design approach specifically tailored for quantum processors. The core claim is that integrating self-correction mechanisms within both the hardware and software layers is paramount for realizing fault-tolerant quantum computation. This approach utilizes redundant hardware architectures alongside sophisticated error detection and correction codes, complemented by a dynamic software layer that intelligently responds to hardware errors. The proposed system aims to minimize the impact of errors by proactively adapting to the detected faults. This represents a fundamentally new holistic approach to fault tolerance, shifting the paradigm from solely relying on post-processing error correction to embedding correction capabilities directly into the quantum processor's architecture and control system. The key performance indicators (KPIs) for this system include reduced qubit error rates, increased computation fidelity, and improved overall quantum processor reliability. This work lays the groundwork for future advancements in quantum computing by addressing a critical bottleneck in the path towards practical, fault-tolerant quantum computation.
Superconducting qubits are a leading platform for quantum computation, yet decoherence and scalability challenges continue to limit progress toward fault-tolerant systems. This review synthesizes research on architectures, noise sources, and error correction to clarify performance trade-offs and guide development. The transition from Transmon to Fluxonium has dramatically improved qubit performance, achieving millisecond-scale coherence times. However, this success reveals a fundamental limit of coherence now being primarily restricted by the physical properties of the materials, specifically dielectric losses occurring at the Josephson junction leads and within the surrounding materials. As overcoming these material limits becomes increasingly difficult, system-level engineering determines whether high-coherence qubits can scale.Scaling quantum systems is difficult because current cooling and control systems create too much heat and this forces a shift to integrated digital superconducting circuits and cryogenic light-based links. While these hardware challenges restrict scaling, experiments in error correction show that logical qubits can already outperform physical ones. For example, a distance-7 surface code improved logical qubit lifetime by 2.4×. Achieving practical fault tolerance, however, requires moving beyond simple error models. Future systems must combine techniques like Dynamical Decoupling and Machine Learning-based Optimal Control with dynamic classical control capable of handling complex, correlated faults such as Multi-Bit Burst Errors. Progress in materials, cryogenic system integration for control, and adaptive error management must advance together to realize scalable, high-fidelity quantum hardware.
Large quantum computations require high-fidelity error-corrected memory and fault-tolerant logical operations. To achieve these with superconducting circuits, quantum processors will need many components operating with low error rates. In practice, fabrication of monolithic superconducting devices produces unavoidable heterogeneity in component performance, which the quantum computer must accommodate. We implement strategies to operate a large dynamic compass code on an array of 156 superconducting qubits arranged on a heavy-hexagonal lattice, making use of the entire monolithic quantum processor and redesigning our measurement schedule to exclude underperforming components. We demonstrate improvements of up to 35% in logical error probabilities for a memory experiment by using a noise-informed decoder combined with strategies to exclude the worst-performing qubits and couplers, along with post-selecting on shots with a low probability of leakage errors. In addition to these memory results, we also observe performance gains of up to 56% when these strategies are applied to measurement-based logic, demonstrated by stability experiments. We furthermore demonstrate high-fidelity fault-tolerant logic through lattice surgery. Through pre-selection filtering techniques, we can obtain Bell fidelities above 77%, and further logical gap post-selection using exclusive decoding increases these fidelities to above 97%. Our experiments demonstrate that high performance can be maintained in key elements of fault-tolerant quantum memory and logic when working on monolithic superconducting quantum processors with underperforming components, by using a suite of noise-informed quantum error correction strategies.