Abstract We show that the quantum approximate optimization algorithm (QAOA) for higher-order, random coefficient, heavy-hex compatible spin glass Ising models has strong parameter concentration across problem sizes from 16 up to 127 qubits for p = 1 up to p = 5, which allows for computationally efficient parameter transfer of QAOA angles. Matrix product state (MPS) simulation is used to compute noise-free QAOA performance. Hardware-compatible short-depth QAOA circuits are executed on ensembles of 100 higher-order Ising models on noisy IBM quantum superconducting processors with 16, 27, and 127 qubits using QAOA angles learned from a single 16-qubit instance using the JuliQAOA tool. We show that the best quantum processors find lower energy solutions up to p = 2 or p = 3, and find mean energies that are about a factor of two off from the noise-free distribution. We show that p = 1 QAOA energy landscapes remain very similar as the problem size increases using NISQ hardware gridsearches with up to a 414 qubit processor.
Abstract We show that the quantum approximate optimization algorithm (QAOA) for higher-order, random coefficient, heavy-hex compatible spin glass Ising models has strong parameter concentration across problem sizes from 16 up to 127 qubits for p = 1 up to p = 5, which allows for computationally efficient parameter transfer of QAOA angles. Matrix product state (MPS) simulation is used to compute noise-free QAOA performance. Hardware-compatible short-depth QAOA circuits are executed on ensembles of 100 higher-order Ising models on noisy IBM quantum superconducting processors with 16, 27, and 127 qubits using QAOA angles learned from a single 16-qubit instance using the JuliQAOA tool. We show that the best quantum processors find lower energy solutions up to p = 2 or p = 3, and find mean energies that are about a factor of two off from the noise-free distribution. We show that p = 1 QAOA energy landscapes remain very similar as the problem size increases using NISQ hardware gridsearches with up to a 414 qubit processor.
The emergent practical applicability of the Quantum Approximate Optimization Algorithm (QAOA) for approximate combinatorial optimization is a subject of considerable interest. One of the primary limitations of QAOA is the task of finding a set of good parameters, which is usually done using a variational optimization loop. Parameter transfer, or parameter concentration, is a phenomenon where QAOA angles trained on problem instances that are self-similar tend to perform well for other problem instances from that similar class. This suggests a potentially highly efficient and scalable nonvariational learning method for QAOA angle finding. In this work, we systematically study QAOA parameter transferability from small problem sizes (16 and 27 decision variables) onto large problem instances (up to 156 qubits) for heavy-hex graph Ising models with geometrically local higher-order terms using the Julia based QAOA simulation tool to perform classical angle finding for up to 49 QAOA layers ( p ) . Parameter transfer of the fixed angles is validated using a combination of full state vector, projected entangled pair states, matrix product state, and LOWESA numerical simulations. We find that the QAOA parameter transfer from single instances applied to other (unseen) problem instances does not in general provide monotonically improving performance as a function of p —there are many cases where the performance temporarily decreases as a function of p —but despite this the transferred angles have a general trend of improved expectation value as the QAOA depth increases, in many cases converging close to the true ground-state energy of the 100 + qubit instances. We also sample the hardware-compatible Ising models using the ensemble of transfer-learned QAOA parameters on several superconducting qubit IBM quantum processors with 127, 133, and 156 qubits. We find continuous solution quality improvement of the hardware-compatible QAOA circuits run on the IBM noisy intermediate-scale quantum processors up to p = 5 on , up to p = 9 on , and up to p = 10 on .
Abstract We present a direct comparison between QAOA (Quantum Alternating Operator Ansatz), and QA (Quantum Annealing) on 127 qubit problem instances. QAOA with p = 1, 2 rounds is executed on the 127 qubit heavy-hex graph gate-model quantum computer ibm_washington, using on-device grid-searches for angle finding, and QA is executed on two Pegasus-chip D-Wave quantum annealers. The problems are random Ising models whose connectivity matches heavy-hex graphs and the Pegasus graph connectivity, and optionally include hardware-compatible cubic terms ( Z Z Z terms). The QAOA circuits are heavily optimized and of extremely short depth, with a CNOT depth of 6 per round, which allows whole chip usage of the heavy-hex lattice. QAOA and QA are both compared against simulated annealing and the optimal solutions are computed exactly using CPLEX. The noiseless mean QAOA expectation values for p = 1, 2 are computed using classical light-cone based simulations. We find QA outperforms QAOA on the evaluated devices.
Multi-angle quantum approximate optimization algorithm (ma-QAOA) has been proposed as an alternative to regular QAOA for solving optimization problems using noisy intermediate scale quantum (NISQ) hardware. Here, we first implement QAOA and ma-QAOA algorithms to solve MaxCut on weighted and unweighted versions of the Erdős–Rényi (ER) and random cubic (RC) graphs of 6 and 10 nodes. Quantum circuit parameters are updated iteratively through classical feedback with the quantum circuit for forward pass modelled on Qiskit simulator without noise models. Then, the quantum circuit for the final run with updated parameters is implemented on Qiskit simulator without noise models, Qiskit simulator with experimentally benchmarked noise models (fake back-end), and also on actual experimental quantum hardware (IBM’s 127-qubit quantum processor ibm brisbane). We show that for most graph instances, ma-QAOA performs better than QAOA (in terms of approximation ratio (AR)) and needs less stages in the quantum circuit for all three aforementioned methods. Finally, we extend our results up to 14-node RC graphs while restricting ourselves to Qiskit simulation without noise (both for parameter update and final run) and show that for most instances, ma-QAOA again needs much less stages compared to QAOA to obtain reasonable AR.
The recently proposed QAOA-GPT framework demonstrated that generative pre-trained transformers can learn mappings between problem graphs and optimized quantum circuits for the Quantum Approximate Optimization Algorithm (QAOA). In this work, we extend QAOA-GPT to Higher-Order Unconstrained Binary Optimization (HUBO) problems, focusing on spin-glass Hamiltonians that include cubic interaction terms. Using FEATHER graph embeddings to encode topological information, we train the model on graph-circuit pairs generated via ADAPT-QAOA and evaluate its performance on 8- and 16-qubit instances embedded on heavy-hex lattices. The generative model produces adaptive QAOA-like circuits and corresponding variational parameters in a single forward pass, bypassing the iterative classical optimization loop. The generated circuits achieve average approximation ratios exceeding 0.95, closely matching classically optimized ADAPT-QAOA results, while maintaining consistent parameter distributions across circuit depths. These results demonstrate that QAOA-GPT generalizes effectively to higher-order cost Hamiltonians and complex energy landscapes, establishing generative modeling as a scalable pathway toward autonomous variational circuit design and quantum algorithm discovery in the NISQ era.
Quantum computers may provide good solutions to combinatorial optimization problems by leveraging the Quantum Approximate Optimization Algorithm (QAOA). The QAOA is often presented as an algorithm for noisy hardware. However, hardware constraints limit its applicability to problem instances that closely match the connectivity of the qubits. Furthermore, the QAOA must outpace classical solvers. Here, we investigate swap strategies to map dense problems into linear, grid and heavy-hex coupling maps. A line-based swap strategy works best for linear and two-dimensional grid coupling maps. Heavy-hex coupling maps require an adaptation of the line swap strategy. By contrast, three-dimensional grid coupling maps benefit from a different swap strategy. Using known entropic arguments we find that the required gate fidelity for dense problems lies deep below the fault-tolerant threshold. We also provide a methodology to reason about the execution-time of QAOA. Finally, we present a QAOA Qiskit Runtime program and execute the closed-loop optimization on cloud-based quantum computers with transpiler settings optimized for QAOA. This work highlights some obstacles to improve to make QAOA competitive, such as gate fidelity, gate speed, and the large number of shots needed. The Qiskit Runtime program gives us a tool to investigate such issues at scale on noisy superconducting qubit hardware.
The Quantum Approximate Optimization Algorithm (QAOA) is regarded as a promising candidate for near-term quantum advantage in combinatorial optimization, yet our ability to study it at scale is limited. Exact recursive formulas have been introduced for predicting QAOA performance on large spin glasses, but the computational cost of evaluating them grows exponentially with the number of QAOA layers, preventing the study of QAOA in the promising high-depth regime. In this work, we show that for the task of computing QAOA energy on any mixed dense spin glass problem, spins approximately decouple into independent spin-boson systems. In the infinite-size limit, the decoupling becomes exact, establishing the spin-boson mapping as a natural framework for the many-body physics of QAOA. This generalized spin-boson mapping gives a recursive procedure for computing QAOA energies that can be executed at modest cost using tensor networks. As a numerical application, we optimize QAOA on pure and mixed spin glasses at depths intractable for prior techniques, observing that higher-degree problems require more layers for a comparable approximation ratio while angle optimization becomes more challenging. While decoupling enables the evaluations of QAOA energies at large size and depth, it does not enable strong simulation of QAOA; a quantum computer is required to sample the bitstring corresponding to the predicted energy.