Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2311.15606 · Optics Express

Selective active resonance tuning for multi-mode nonlinear photonic cavities

Alan D. Logan, Nicholas Yama, Kai‐Mei C. Fu

Published Mar 19, 2024• 3 citations
arXivHTMLPDF

Abstract

Resonant enhancement of nonlinear photonic processes is critical for the scalability of applications such as long-distance entanglement generation. To implement nonlinear resonant enhancement, multiple resonator modes must be individually tuned onto a precise set of process wavelengths, which requires multiple linearly-independent tuning methods. Using coupled auxiliary resonators to indirectly tune modes in a multi-resonant nonlinear cavity is particularly attractive because it allows the extension of a single physical tuning mechanism, such as thermal tuning, to provide the required independent controls. Here we model and simulate the performance and tradeoffs of a coupled-resonator tuning scheme which uses auxiliary resonators to tune specific modes of a multi-resonant nonlinear process. Our analysis determines the tuning bandwidth for steady-state mode field intensity can significantly exceed the inter-cavity coupling rate g if the total quality factor of the auxiliary resonator is higher than the multi-mode main resonator. Consequently, over-coupling a nonlinear resonator mode to improve the maximum efficiency of a frequency conversion process will simultaneously expand the auxiliary resonator tuning bandwidth for that mode, indicating a natural compatibility with this tuning scheme. We apply the model to an existing small-diameter triply-resonant ring resonator design and find that a tuning bandwidth of 136 GHz ≈ 1.1 nm can be attained for a mode in the telecom band while limiting excess scattering losses to a quality factor of 10 6 . Such range would span the distribution of inhomogeneously broadened quantum emitter ensembles as well as resonator fabrication variations, indicating the potential for the auxiliary resonators to enable not only low-loss telecom conversion but also the generation of indistinguishable photons in a quantum network.

DOI
10.1364/oe.512048

Related papers

Broadband frequency conversion and shaping of single photons emitted from a nonlinear cavity

Murray W. McCutcheon, Darrick E. Chang, Yinan Zhang +2 more

Much recent effort has focused on coupling individual quantum emitters to optical microcavities in order to produce single photons on demand, enable single-photon optical switching, and implement functional nodes of a quantum network. Techniques to control the bandwidth and frequency of the outgoing single photons are of practical importance, allowing direct emission into telecommunications wavelengths and "hybrid" quantum networks incorporating different emitters. Here, we describe an integrated approach involving a quantum emitter coupled to a nonlinear optical resonator, in which the emission wavelength and pulse shape are controlled using the intra-cavity nonlinearity. Our scheme is general in nature, and demonstrates how the photonic environment of a quantum emitter can be tailored to determine the emission properties. As specific examples, we discuss a high Q-factor, TE-TM double-mode photonic crystal cavity design that allows for direct generation of single photons at telecom wavelengths (1425 nm) starting from an InAs/GaAs quantum dot with a 950 nm transition wavelength, and a scheme for direct optical coupling between such a quantum dot and a diamond nitrogen-vacancy center at 637 nm.

arXiv:0903.4706•Optics Express•Nov 25, 2009•57 citations

Reconfigurable microring resonators for multipurpose quantum light sources

Yuxing Du, Yingwen Liu, Chao Wu +6 more

Abstract Microring resonators (MRRs) are extensively utilized in photonic chips for generating quantum light sources and enabling high-efficiency nonlinear frequency conversion. However, conventional microrings are typically optimized for a single specific function, limiting their versatility in multifunctional applications. In this work, we propose a reconfigurable microring resonator architecture designed to accommodate diverse application requirements. By integrating a cascaded Mach–Zehnder interferometer (MZI) as the microring coupler, the design enables independent control of the quality factors for pump, signal and idler photons through two tunable phase shifters. This capability allows for dynamic tuning and optimization of critical performance parameters, including photon-pair generation rate (PGR), spectral purity and single photon heralding efficiency (HE). The proposed structure is implemented on a silicon photonic chip, and experimental results exhibit a wide range of tunability for these parameters, with excellent agreement with theoretical predictions. This flexible and multi-functional design offers a promising pathway for high-performance, highly integrated on-chip quantum information processing systems.

Chinese Physics B•Apr 14, 2025•0 citations

Efficient and broadband quantum frequency comb generation in a monolithic AlGaAs-on-insulator microresonator

Xiaodong Zheng, Xu Jing, Chenbo Liu +9 more

The exploration of photonic systems for quantum information processing has generated widespread interest in multiple cutting-edge research fields. Photonic frequency encoding stands out as an especially viable approach, given its natural alignment with established optical communication technologies, including fiber networks and wavelength-division multiplexing systems. Substantial reductions in hardware resources and improvements in quantum performance can be expected by utilizing multiple frequency modes. The integration of nonlinear photonics with microresonators provides a compelling way for generating frequency-correlated photon pairs across discrete spectral modes. Here, by leveraging the high material nonlinearity and low nonlinear loss, we demonstrate an efficient chip-scale multi-wavelength quantum light source based on AlGaAs-on-insulator, featuring a free spectral range of approximately 200 GHz at telecom wavelengths. The optimized submicron waveguide geometry provides both high effective nonlinearity (~550 m$^{-1}$W$^{-1}$) and broad generation bandwidth, producing eleven distinct wavelength pairs across a 35.2 nm bandwidth with an average spectral brightness of 2.64 GHz mW$^{-2}$nm$^{-1}$. The generation of energy-time entanglement for each pair of frequency modes is verified through Franson interferometry, yielding an average net visibility of 93.1%. With its exceptional optical gain and lasing capabilities, the AlGaAs-on-insulator platform developed here shows outstanding potential for realizing fully integrated, ready-to-deploy quantum photonic systems on chip.

quant-pharXiv:2601.08289•Jan 14, 2026•2 citations

All-Dielectric Resonant Cavity Electro-Optic Transduction Between Microwave and Telecom

Mihir Khanna, Yang Hu, Thomas P. Purdy

We present a resonant electro-optic transducer for efficient conversion between microwave and telecom wavelength photons. Our platform employs a bulk lithium niobate crystal whose large dielectric constant creates wavelength-scale confinement of microwave photons. By incorporating this crystal within a high-finesse Fabry - Perot optical cavity, microwave photons couple to optical photons through the electro-optic effect. We demonstrate the ability to tune our system into triply resonant operation, where microwave photons, optical pump photons, and upconverted optical photons are simultaneously resonant with high quality factor electromagnetic modes of the system. The device achieves photon number conversion efficiency at the percent level, comparable to state-of-the-art devices at room temperature -- sufficient to resolve the thermal occupation of the microwave mode -- while avoiding the noise and loss associated with metal electrodes. These results establish our all-dielectric devices as a promising platform for high-precision sensing of optically detected microwave fields and as a viable route toward single-photon-level microwave - optical quantum transduction.

quant-pharXiv:2601.13199•Optica•Jan 20, 2026•1 citation

Simulation-guided design of an integrated photonic cavity for frequency-multiplexed Spontaneous Parametric Down Conversion

Benjamin Szamosfalvi, Michael Raymer, CJ Xin +4 more

Frequency-multiplexed entangled photon pair sources with narrow bandwidths and high pair generation efficiency are a key enabling technology for quantum networking. We present a simulation-based design study of an integrated photonic racetrack resonator source for spontaneous parametric down-conversion (SPDC) that simultaneously achieves all three properties. The central result is a simulated set of 90 doubly resonant signal/idler frequency-mode pairs with an effective Schmidt number of 89.62, average bandwidths of 1.08 GHz, a mean free spectral range of 51.9 GHz, and a total internal pair-generation-rate efficiency of 1.16 GHz/mW. Under deterministic wavelength-based splitting, the accessible frequency-state Schmidt number is reduced to 44.93. To support these predictions, we derive a closed-form analytical connection between classical cavity parameters (resonant frequencies, decay rates, coupling coefficients) and the quantum joint spectral amplitude and pair generation rate, extending the dispersive-medium quantization formalism of Raymer to the nonlinear optical cavity case. We demonstrate how classical electromagnetic field simulations can be combined with this analytical framework to predict quantum figures of merit for an integrated photonic source prior to fabrication. Fabrication and experimental validation are left for future work.

quant-pharXiv:2605.03121•Physical Review Applied•May 6, 2026•0 citations

Nonlinear coupling of linearly uncoupled resonators through a Mach–Zehnder interferometer

Federico Andrea Sabattoli, Houssein El Dirani, Laurène Youssef +11 more

Optical nonlinear processes in linearly uncoupled resonators are being actively studied as a convenient way to engineer and control the generation of non-classical light. In these structures, one can take advantage of the independent combs of resonances of two linearly uncoupled ring resonators for field enhancement, with the phase-matching condition being significantly relaxed compared to a single resonator. However, previous implementations of this approach have shown a limited operational bandwidth along with a significant reduction of the generation efficiency. Here, we experimentally demonstrate that a Mach–Zehnder interferometer can be used to effectively linearly uncouple two resonators and, at the same time, allows for their efficient nonlinear coupling. We demonstrate that this structure can lead to an unprecedented control over the rings' interaction and can operate over more than 160 nm, covering the S-, C-, and L-telecom bands. In addition, we show that the photon pair generation efficiency is increased by a factor of four with respect to previous implementations.

Applied Physics Letters•Nov 14, 2022•7 citations
Resonant enhancement of nonlinear photonic processes is critical for the scalability of applications such as long-distance entanglement generation. To implement nonlinear resonant enhancement, multiple resonator modes must be individually tuned onto a precise set of process wavelengths, which requires multiple linearly-independent tuning methods. Using coupled auxiliary resonators to indirectly tune modes in a multi-resonant nonlinear cavity is particularly attractive because it allows the extension of a single physical tuning mechanism, such as thermal tuning, to provide the required independent controls. Here we model and simulate the performance and tradeoffs of a coupled-resonator tuning scheme which uses auxiliary resonators to tune specific modes of a multi-resonant nonlinear process. Our analysis determines the tuning bandwidth for steady-state mode field intensity can significantly exceed the inter-cavity coupling rate g if the total quality factor of the auxiliary resonator is higher than the multi-mode main resonator. Consequently, over-coupling a nonlinear resonator mode to improve the maximum efficiency of a frequency conversion process will simultaneously expand the auxiliary resonator tuning bandwidth for that mode, indicating a natural compatibility with this tuning scheme. We apply the model to an existing small-diameter triply-resonant ring resonator design and find that a tuning bandwidth of 136 GHz ≈ 1.1 nm can be attained for a mode in the telecom band while limiting excess scattering losses to a quality factor of 10 6 . Such range would span the distribution of inhomogeneously broadened quantum emitter ensembles as well as resonator fabrication variations, indicating the potential for the auxiliary resonators to enable not only low-loss telecom conversion but also the generation of indistinguishable photons in a quantum network.
Much recent effort has focused on coupling individual quantum emitters to optical microcavities in order to produce single photons on demand, enable single-photon optical switching, and implement functional nodes of a quantum network. Techniques to control the bandwidth and frequency of the outgoing single photons are of practical importance, allowing direct emission into telecommunications wavelengths and "hybrid" quantum networks incorporating different emitters. Here, we describe an integrated approach involving a quantum emitter coupled to a nonlinear optical resonator, in which the emission wavelength and pulse shape are controlled using the intra-cavity nonlinearity. Our scheme is general in nature, and demonstrates how the photonic environment of a quantum emitter can be tailored to determine the emission properties. As specific examples, we discuss a high Q-factor, TE-TM double-mode photonic crystal cavity design that allows for direct generation of single photons at telecom wavelengths (1425 nm) starting from an InAs/GaAs quantum dot with a 950 nm transition wavelength, and a scheme for direct optical coupling between such a quantum dot and a diamond nitrogen-vacancy center at 637 nm.
Abstract Microring resonators (MRRs) are extensively utilized in photonic chips for generating quantum light sources and enabling high-efficiency nonlinear frequency conversion. However, conventional microrings are typically optimized for a single specific function, limiting their versatility in multifunctional applications. In this work, we propose a reconfigurable microring resonator architecture designed to accommodate diverse application requirements. By integrating a cascaded Mach–Zehnder interferometer (MZI) as the microring coupler, the design enables independent control of the quality factors for pump, signal and idler photons through two tunable phase shifters. This capability allows for dynamic tuning and optimization of critical performance parameters, including photon-pair generation rate (PGR), spectral purity and single photon heralding efficiency (HE). The proposed structure is implemented on a silicon photonic chip, and experimental results exhibit a wide range of tunability for these parameters, with excellent agreement with theoretical predictions. This flexible and multi-functional design offers a promising pathway for high-performance, highly integrated on-chip quantum information processing systems.
The exploration of photonic systems for quantum information processing has generated widespread interest in multiple cutting-edge research fields. Photonic frequency encoding stands out as an especially viable approach, given its natural alignment with established optical communication technologies, including fiber networks and wavelength-division multiplexing systems. Substantial reductions in hardware resources and improvements in quantum performance can be expected by utilizing multiple frequency modes. The integration of nonlinear photonics with microresonators provides a compelling way for generating frequency-correlated photon pairs across discrete spectral modes. Here, by leveraging the high material nonlinearity and low nonlinear loss, we demonstrate an efficient chip-scale multi-wavelength quantum light source based on AlGaAs-on-insulator, featuring a free spectral range of approximately 200 GHz at telecom wavelengths. The optimized submicron waveguide geometry provides both high effective nonlinearity (~550 m−1^{-1}−1W−1^{-1}−1) and broad generation bandwidth, producing eleven distinct wavelength pairs across a 35.2 nm bandwidth with an average spectral brightness of 2.64 GHz mW−2^{-2}−2nm−1^{-1}−1. The generation of energy-time entanglement for each pair of frequency modes is verified through Franson interferometry, yielding an average net visibility of 93.1%. With its exceptional optical gain and lasing capabilities, the AlGaAs-on-insulator platform developed here shows outstanding potential for realizing fully integrated, ready-to-deploy quantum photonic systems on chip.
We present a resonant electro-optic transducer for efficient conversion between microwave and telecom wavelength photons. Our platform employs a bulk lithium niobate crystal whose large dielectric constant creates wavelength-scale confinement of microwave photons. By incorporating this crystal within a high-finesse Fabry - Perot optical cavity, microwave photons couple to optical photons through the electro-optic effect. We demonstrate the ability to tune our system into triply resonant operation, where microwave photons, optical pump photons, and upconverted optical photons are simultaneously resonant with high quality factor electromagnetic modes of the system. The device achieves photon number conversion efficiency at the percent level, comparable to state-of-the-art devices at room temperature -- sufficient to resolve the thermal occupation of the microwave mode -- while avoiding the noise and loss associated with metal electrodes. These results establish our all-dielectric devices as a promising platform for high-precision sensing of optically detected microwave fields and as a viable route toward single-photon-level microwave - optical quantum transduction.
Frequency-multiplexed entangled photon pair sources with narrow bandwidths and high pair generation efficiency are a key enabling technology for quantum networking. We present a simulation-based design study of an integrated photonic racetrack resonator source for spontaneous parametric down-conversion (SPDC) that simultaneously achieves all three properties. The central result is a simulated set of 90 doubly resonant signal/idler frequency-mode pairs with an effective Schmidt number of 89.62, average bandwidths of 1.08 GHz, a mean free spectral range of 51.9 GHz, and a total internal pair-generation-rate efficiency of 1.16 GHz/mW. Under deterministic wavelength-based splitting, the accessible frequency-state Schmidt number is reduced to 44.93. To support these predictions, we derive a closed-form analytical connection between classical cavity parameters (resonant frequencies, decay rates, coupling coefficients) and the quantum joint spectral amplitude and pair generation rate, extending the dispersive-medium quantization formalism of Raymer to the nonlinear optical cavity case. We demonstrate how classical electromagnetic field simulations can be combined with this analytical framework to predict quantum figures of merit for an integrated photonic source prior to fabrication. Fabrication and experimental validation are left for future work.
Optical nonlinear processes in linearly uncoupled resonators are being actively studied as a convenient way to engineer and control the generation of non-classical light. In these structures, one can take advantage of the independent combs of resonances of two linearly uncoupled ring resonators for field enhancement, with the phase-matching condition being significantly relaxed compared to a single resonator. However, previous implementations of this approach have shown a limited operational bandwidth along with a significant reduction of the generation efficiency. Here, we experimentally demonstrate that a Mach–Zehnder interferometer can be used to effectively linearly uncouple two resonators and, at the same time, allows for their efficient nonlinear coupling. We demonstrate that this structure can lead to an unprecedented control over the rings' interaction and can operate over more than 160 nm, covering the S-, C-, and L-telecom bands. In addition, we show that the photon pair generation efficiency is increased by a factor of four with respect to previous implementations.