When a measurement observable does not commute with a quantum system's Hamiltonian, the energy of the measured system is typically not conserved during the measurement. Instead, energy can be transferred between the measured system and the meter. In this work, we experimentally investigate the energetics of noncommuting measurements in a circuit quantum electrodynamics system containing a transmon qubit embedded in a 3D microwave cavity. We show through spectral analysis of the cavity photons that a frequency shift is imparted on the probe, in balance with the associated energy changes of the qubit. Our experiment provides new insights into foundations of quantum measurement, as well as a better understanding of the key mechanisms at play in quantum energetics. Published by the American Physical Society 2024
When a measurement observable does not commute with a quantum system's Hamiltonian, the energy of the measured system is typically not conserved during the measurement. Instead, energy can be transferred between the measured system and the meter. In this work, we experimentally investigate the energetics of noncommuting measurements in a circuit quantum electrodynamics system containing a transmon qubit embedded in a 3D microwave cavity. We show through spectral analysis of the cavity photons that a frequency shift is imparted on the probe, in balance with the associated energy changes of the qubit. Our experiment provides new insights into foundations of quantum measurement, as well as a better understanding of the key mechanisms at play in quantum energetics. Published by the American Physical Society 2024
Circuit quantum electrodynamics (cQED), exemplified by a coupled system of a superconducting qubit and a microwave cavity, is a powerful framework for the quantum control and measurement of macroscopic quantum states in solid-state circuits. Quantum circuits based on superconducting qubits have emerged as one of the leading platforms in the pursuit of fault-tolerant quantum computing. Despite significant progress in extending qubit lifetimes, refining experimental protocols, and scaling up quantum processors, errors arising from the control and measurement of superconducting qubits continue to hinder the realization of a universal quantum computer. To investigate the error mechanisms for state-of-the-art qubits, we realize long-lived superconducting transmon qubits that exhibit fluctuating lifetimes, with an average of 0.2 ms and a maximum exceeding 0.4 ms. We then investigate their dominant error mechanism. By introducing novel time-resolved error measurements that are synchronized with the operation of the pulse tube cooler in a dilution refrigerator, we find that mechanical vibrations from the pulse tube induce nonequilibrium dynamics in highly coherent qubits, leading to their correlated bit-flip errors. Our findings not only deepen our understanding of qubit error mechanisms but also provide valuable insights into potential error-mitigation strategies for achieving fault tolerance by decoupling superconducting qubits from their mechanical environments. We also present a novel scheme for operating a cQED system in a regime where the cavity is largely displaced. We find that a qubit drive at the bare cavity frequency can effectively displace the cavity field while minimizing the cavity-drive-induced dephasing and the ac Stark shift. Furthermore, we demonstrate that standard cQED protocols, such as qubit control, readout, and cavity single-photon generation, remain compatible with largely displaced cavity fields, even beyond the critical photon number. These findings open new pathways for exploring cQED dynamics in large-photon-number regimes, including the study of nonlinear phenomena in microwave cavities, the saturation of two-level system baths for extending the coherence of microwave quantum states, and the acceleration of the dispersive readout. Finally, mechanical resonators have emerged as integral components in quantum computing for storing and transducing quantum information. Low-frequency mechanical resonators, with extremely low energy dissipation rates, are particularly interesting for extending the lifetimes of stored quantum information. However, integrating low-frequency mechanical resonators with qubits is challenging because their small energy gaps make coherent energy exchange and ground-state preparation difficult. In this thesis, we report the first steps towards the characterization of a hybrid quantum device, consisting of a Transmon qubit and a circuit optomechanical system, both coupled to a 3D microwave cavity.
We investigate the anomalous energy change of the measurement apparatus when a qubit is measured in bases that do not commute with energy. We model two possible measurement implementations: one is a quantum clock model with a completely time-independent Hamiltonian, while the other is a Jaynes-Cummings model that is time-dependent but conserves the total excitation number. We look at the mean energy change of the measurement apparatus in both models, conditioned on the qubit postselection, and we find that this change can be much greater than the level spacing of the qubit, like an anomalous weak value. In the clock model, the expression for the apparatus energy shift explicitly contains the weak value of the qubit Hamiltonian. However, in our case, no explicit weak measurements are carried out. Our two models give different results, which we explain to be a consequence of the nondegenerate spectrum of the Jaynes-Cummings model. We compare our calculations in the Jaynes-Cummings model with the experimental data of J. Stevens et al., [Phys. Rev. Lett. 129, 110601 (2022)], and we find good agreement when the conditions of our derivation are valid.
Thermodynamics constrains changes to the energy of a system, both deliberate and random, via its first and second laws. When the system is not in equilibrium, fluctuation theorems such as the Jarzynski equality further restrict the distributions of deliberate work done. Such fluctuation theorems have been experimentally verified in small, nonequilibrium quantum systems undergoing unitary or decohering dynamics. Yet, their validity in systems governed by a non-Hermitian Hamiltonian has long been contentious due to the false premise of the Hamiltonian's dual and equivalent roles in dynamics and energetics. Here we show that work fluctuations in a non-Hermitian qubit obey the Jarzynski equality even if its Hamiltonian has complex or purely imaginary eigenvalues. With postselection on a dissipative superconducting circuit undergoing a cyclic parameter sweep, we experimentally quantify the work distribution using projective energy measurements and show that the fate of the Jarzynski equality is determined by the parity-time symmetry of, and the energetics that result from, the corresponding non-Hermitian, Floquet Hamiltonian. By distinguishing the energetics from non-Hermitian dynamics, our results provide the recipe for investigating the nonequilibrium quantum thermodynamics of such open systems. Published by the American Physical Society 2024
Measuring an observable which does not commute with the Hamiltonian of a quantum system usually modifies the mean energy of this system. In an autonomous measurement scheme, coupling the system to a quantum meter, the system's energy change must be compensated by the meter's energy change. Here, we theoretically study such an autonomous meter-system dynamics: a qubit interacting dispersively with a light pulse propagating in a one-dimensional waveguide. The phase of the light pulse is shifted, conditioned to the qubit's state along the z direction, while the orientation of the qubit Hamiltonian is arbitrary. As the interaction is dispersive, photon number is conserved so that energy balance has to be attained by spectral deformations of the light pulse. Building on analytical and numerical solutions, we reveal the mechanism underlying this spectral deformation and display how it compensates for the qubit's energy change. We explain the formation of a three-peak structure of the output spectrum and we provide the conditions under which this is observable.
Abstract Superconducting quantum circuits are a leading platform for quantum-information processing, but their development requires expertise spanning device design, microfabrication, cryogenic operation, microwave control, and quantum characterization. In this work, we report the realization of a flux-tunable superconducting transmon platform and present an integrated workflow encompassing design, fabrication, measurement, and numerical modeling. The device consists of an Al/AlOx/Al transmon coupled to a three-dimensional microwave cavity operating in the circuit quantum electrodynamics (cQED) dispersive regime. Two-tone spectroscopy reveals a fundamental transition frequency of ω01=5.0122GHz and an anharmonicity of α/2π=−202.4MHz , corresponding to EJ/EC≈82.9 . Flux spectroscopy yields a cavity-qubit coupling strength of g/2π=260MHz , while the cavity linewidth gives a loaded quality factor of QL=6127 and a Purcell limit of T1Purcell≈82μs . Time-domain measurements yield coherence times of T1=17.4μs and T2∗=5.8μs . To investigate coherence and dissipation in the device, the experimental observations are analyzed within a Lindblad master-equation framework describing cavity photon loss and thermal excitation, qubit energy relaxation, and pure dephasing processes. Using a set of experimentally extracted parameters, the model reproduces the measured spectroscopic and time-domain observables, providing a quantitative description of the open-system dynamics of the transmon-cavity platform. The analysis shows that the measured coherence is primarily limited by pure dephasing and energy-relaxation processes, whereas thermal excitation plays a minor role under the experimental conditions. Inspired by the broader framework of quantum dissipation in macroscopic quantum systems pioneered by Caldeira and collaborators, this approach enables a quantitative analysis of relaxation and dephasing processes in superconducting quantum circuits. Beyond the characterization of a single device, the present work demonstrates the establishment of the expertise, infrastructure, and experimental workflow required for the design, fabrication, measurement, and modeling of superconducting quantum circuits, contributing to the development of quantum technologies in Brazil and related applications.
The design and implementation of quantum technologies necessitates the understanding of thermodynamic processes in the quantum domain. In stark contrast to macroscopic thermodynamics, at the quantum scale processes generically operate far from equilibrium and are governed by fluctuations. Thus, experimental insight and empirical findings are indispensable in developing a comprehensive framework. To this end, we theoretically propose an experimentally realistic quantum engine that uses transmon qubits as working substance. We solve the dynamics analytically and calculate its efficiency.