Cooling a quantum system to its ground state is important for the characterization of nontrivial interacting systems and in the context of a variety of quantum information platforms. It can be achieved by employing measurement-based passive steering protocols, where the steering steps are predetermined and are not based on measurement readouts. However, measurements realized by coupling the system to auxiliary quantum degrees of freedom (“detectors”) are rather costly and protocols in which the number of detectors scales with system size will have limited practical applicability. Here, we identify conditions under which measurement-based cooling protocols can be taken to the ultimate dilute limit where the number of detectors is independent of system size. For two examples of frustration-free one-dimensional spin chains, we show that steering on a single link is sufficient to cool these systems into their unique ground states. We corroborate our analytical arguments with finite-size numerical simulations and discuss further applications of dilute cooling. Published by the American Physical Society 2024
Cooling a quantum system to its ground state is important for the characterization of nontrivial interacting systems and in the context of a variety of quantum information platforms. It can be achieved by employing measurement-based passive steering protocols, where the steering steps are predetermined and are not based on measurement readouts. However, measurements realized by coupling the system to auxiliary quantum degrees of freedom (“detectors”) are rather costly and protocols in which the number of detectors scales with system size will have limited practical applicability. Here, we identify conditions under which measurement-based cooling protocols can be taken to the ultimate dilute limit where the number of detectors is independent of system size. For two examples of frustration-free one-dimensional spin chains, we show that steering on a single link is sufficient to cool these systems into their unique ground states. We corroborate our analytical arguments with finite-size numerical simulations and discuss further applications of dilute cooling. Published by the American Physical Society 2024
Lindbladian dynamics of open systems may be employed to steer a many-body system towards a non-trivial ground state of a local Hamiltonian. Such protocols provide us with tunable platforms facilitating the engineering and study of non-trivial many-body states. Steering towards a degenerate ground state manifold provides us with a protected platform to employ many-body states as a resource for quantum information processing. Notably, ground states of frustrated local Hamiltonians have been known not to be amenable to steering protocols. Revisiting this intricate physics we report two new results: (i) we find a broad class of (geometrically) frustrated local Hamiltonians for which steering of the ground state manifold is possible through a sequence of discrete steering steps. Following the steering dynamics, states within the degenerate ground-state manifold keep evolving in a non-stationary manner. (ii) For the class of Hamiltonians with ground states which are non-steerable through local superoperators, we derive a "glass floor" on how close to the ground state one can get implementing a steering protocol. This is expressed invoking the concept of cooling-by-steering (a lower bound of the achievable temperature), or through an upper bound of the achievable fidelity. Our work provides a systematic outline for studying quantum state manipulation of a broad class of strongly correlated states.
Quantum state engineering plays a vital role in various applications in the field of quantum information. Different strategies, including drive-and-dissipation, adiabatic cooling, and measurement-based steering, have been proposed for state generation and manipulation, each with its upsides and downsides. Here, we address a class of measurement-based state engineering protocols where a sequence of generalized measurements is employed to steer a quantum system toward a desired (pure or mixed) target state. Previously studied measurement-based protocols relied on idealized procedures and avoided exploration of the effects of various errors stemming from imperfections of experimental realizations and external noise. We employ the quantum trajectory formalism to provide a detailed analysis of the robustness of these steering protocols against multiple classes of errors. We study a set of realistic errors that can be classified as dynamic or static, depending on whether they remain unchanged while running the protocol. More specifically, we investigate the impact of the erroneous choice of detector-system coupling, erroneous re-initialization of the detector state following a measurement step, fluctuating steering directions, and environmentally induced errors in the detector-system interaction. We show that the protocol remains fully robust against the erroneous choice of detector-system coupling parameters and presents reasonable robustness against other types of errors. Our analysis employs various quantifiers such as fidelity, trace distance, and linear entropy to characterize the protocol's robustness and provide analytical results for these quantifiers against various errors. We introduce averaging hierarchies of stochastic equations describing individual quantum trajectories associated with detector readouts. Subsequently, we demonstrate the commutation between the classical expectation value and the time-ordering operator of the exponential of a Hamiltonian with multiplicative white noise, as well as the commutation of the expectation value and the partial trace with respect to detector outcomes. Our ideas are implemented and demonstrated for a specific class of steering platforms, addressing a single qubit. Published by the American Physical Society 2024
We set out a general protocol for steering the state of a quantum system from an arbitrary initial state toward a chosen target state by coupling it to auxiliary quantum degrees of freedom.The protocol requires multiple repetitions of an elementary step: During each step, the system evolves for a fixed time while coupled to auxiliary degrees of freedom (which we term "detector qubits") that have been prepared in a specified initial state.The detectors are discarded at the end of the step, or equivalently, their state is determined by a projective measurement with an unbiased average over all outcomes.The steering harnesses backaction of the detector qubits on the system, arising from entanglement generated during the coupled evolution.We establish principles for the design of the system-detector coupling that ensure steering of a desired form.We illustrate our general ideas using both few-body examples (including a pair of spins-1/2 steered to the singlet state) and a many-body example (a spin-1 chain steered to the Affleck-Kennedy-Lieb-Tasaki state).We study the continuous time limit in our approach and discuss similarities to (and differences from) drive-and-dissipation protocols for quantum state engineering.Our protocols are amenable to implementations using present-day technology.Obvious extensions of our analysis include engineering of other many-body phases in one and higher spatial dimensions, adiabatic manipulations of the target states, and the incorporation of active error correction steps.
We investigate and compare two particle number-conserving protocols for the preparation of a topologically nontrivial state. The first is derived from thermally coupling the system to a cold bath, while the second is based on engineered dissipation. We numerically study the time required to reach the target state as well as its robustness against physically important perturbations. Crucially, in both protocols, the cooling capability is limited by dissipatively induced diffusion processes. The resulting quadratic scaling of the cooling time with system size is also corroborated analytically using mean-field approximations and a purely classical random-walk model. Furthermore, we find that the engineered protocol admits a unique and stable dark state, which contributes to an ongoing discussion regarding the applicability of dissipative state preparation to many-body systems.
The controlled preparation of quantum many-body states is a central challenge for quantum technologies. While preparing target states coherently is possible in principle, it is often fragile and experimentally demanding. Dissipative state preparation, where engineered environments drive the system toward desired steady states, provides a complementary and powerful paradigm. This thesis explores dissipative methods for preparing complex many-body states along three distinct directions. First, we investigate the dissipative stabilization of injective matrix product states (MPS). Injective MPS are particularly well suited for dissipative preparation because they arise as ground states of frustration-free parent Hamiltonians, allowing for tailored jump operators to steer the system directly into the target state. We showcase the surprising result that such state preparation works even in the dilute limit where steering only acts on a single link. Moreover, we introduce a formalism for engineering additional coherent interactions, extending the set of accessible states. Second, and complementary to steering, we develop and analyze a universal cooling scheme capable of preparing ground states even in frustrated quantum systems. In contrast to steering methods, universal cooling can overcome the glass floor that forbids steering methods to prepare such frustrated ground states. A key insight here is that the presented cooling scheme is completely system-agnostic making it extremely robust. Finally, we pursue dressing of the system eigenstates by means of either classical drives or coherent interactions as a means to influence the action of dissipation on the system. Focusing first on time-dependent systems, we propose a generalized numerical implementation of non-adiabatic master equations suitable for the use of optimal control tools. Additionally, we investigate how the collective coupling between a spin ensemble and a cavity can steer the system into a spin-squeezed steady state. Together, these three avenues illustrate how tailored dissipative dynamics can extend the frontier of many-body state preparation, from stabilizing injective MPS to cooling complex frustrated systems and generating non-classical steady states in the dressed framework.
Probing correlated states of many-body systems is one of the central tasks for quantum simulators and processors. A promising approach to state preparation is to realize desired correlated states as steady states of engineered dissipative evolution. A recent experiment with a Google superconducting quantum processor [X. Mi , Science 383, 1332 (2024)] demonstrated a cooling algorithm utilizing auxiliary degrees of freedom that are periodically reset to remove quasiparticles from the system, thereby driving it towards its ground state. In this work, we develop a kinetic-theory framework to describe quasiparticle cooling dynamics, and employ it to compare the efficiency of different cooling algorithms. In particular, we introduce a protocol where coupling to auxiliaries is modulated in time to minimize heating processes, and demonstrate that it allows a high-fidelity preparation of ground states in different quantum phases. We verify the validity of the kinetic-theory description by an extensive comparison with numerical simulations for the examples of a one-dimensional transverse-field Ising model, the transverse-field Ising model with an additional integrability-breaking field, and a nonintegrable antiferromagnetic Heisenberg spin ladder. In all cases, we are able to efficiently cool into the many-body ground state. The effects of noise, which limits efficiency of variational quantum algorithms in near-term quantum processors, are investigated through the lens of the kinetic theory: we show how the steady-state quasiparticle populations depend on the noise rate, and we establish maximum noise values for achieving high-fidelity ground states. This work establishes quasiparticle cooling algorithms as a practical, robust method for many-body state preparation on near-term quantum processors.