Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2311.01560 · ACS Photonics

Parallel Quantum-Enhanced Sensing

Mohammadjavad Dowran, Aye Win, Umang Jain, Ashok Kumar, Benjamin J. Lawrie, Raphael C. Pooser, Alberto M. Marino

Published Jul 22, 2024• 7 citations
arXivHTMLPDF

Abstract

Quantum metrology takes advantage of quantum correlations to enhance the sensitivity of sensors and measurement techniques beyond their fundamental classical limit, given by the shot-noise limit. The use of both temporal and spatial correlations present in quantum states of light can extend quantum-enhanced sensing to a parallel configuration that can simultaneously probe an array of sensors or independently measure multiple parameters. To this end, we use multispatial-mode bright twin beams of light, which are characterized by independent quantum-correlated spatial subregions in addition to quantum temporal correlations, to probe a four-sensor quadrant plasmonic array. We show that it is possible to independently and simultaneously measure local changes in refractive index for all four sensors with a quantum enhancement in sensitivity in the range of 22% to 24% over the corresponding classical configuration. These results provide a first step toward highly parallel spatially resolved quantum-enhanced sensing techniques and pave the way toward more complex quantum sensing and quantum imaging platforms.

DOI
10.1021/acsphotonics.4c00256

Related papers

Quantum Plasmonic Sensing Using Squeezed Light

Mohammadjavad Dowran

Quantum sensing is an emerging field of quantum optics that seeks to take advantage of quantum correlations available in quantum states of light to enable sensitivities beyond the fundamental classical limits. \nThe sensitivity of measurements and sensing apparatus when using classical states of light is limited to the shot-noise limit (SNL), which is achieved with coherent states of light. \n \nTwo-mode squeezed states of light (twin beams) have quantum correlations both in time and space, leading to temporal and spatial squeezing properties. \nSeveral applications can benefit from such noise reduction to enable new approaches, such as quantum-enhanced interferometry, quantum imaging, and quantum sensing. \nThe emergence of quantum technologies has been referred to as the second quantum revolution. \nFor metrology and sensing applications, in particular, it has led to new state-of-the-art sensitivity limits. \n \nIn this thesis, we discuss the implementation of quantum sensing based on squeezed states of light and plasmonic sensors as a platform for the demonstration of real-life quantum sensing. \nWe present a quantum-enhanced plasmonic sensing setup that can detect changes in the refractive index of air beyond the SNL. \nFurthermore, we generalize such experimental apparatus to probe an array of sensors using the quantum correlations present in different spatial locations to demonstrate a parallel quantum-enhanced plasmonic sensing scheme that can simultaneously detect changes in the refractive index of air in multiple locations with a single probing beam. \nThese results prove the applicability of twin beams for real-life applications based on plasmonic sensors. \nThe spatially resolved sensing scheme can be extended to pixel-size sensing of multiple sensors for multi-parameter estimation and detection applications to reach more complex sensing architectures.

•Aug 5, 2021•0 citations

Parallel Quantum Enhanced Plasmonic Sensing through Spatial Quantum Correlations

Mohammadjavad Dowran, Aye Win, Ashok Kumar +3 more

We present a parallel quantum enhanced sensing configuration that takes advantage of spatial quantum correlations in bright twin beams. We independently probe different spatial regions of plasmonic sensors with sensitives beyond the shot-noise limit.

Frontiers in Optics•Jan 1, 2019•0 citations

Quantum-enhanced plasmonic sensing

Mohammadjavad Dowran, Ashok Kumar, Benjamin J. Lawrie +2 more

Quantum resources can enhance the sensitivity of a device beyond the classical shot noise limit and, as a result, revolutionize the field of metrology through the development of quantum-enhanced sensors. In particular, plasmonic sensors, which are widely used in biological and chemical sensing applications, offer a unique opportunity to bring such an enhancement to real-life devices. Here, we use bright entangled twin beams to enhance the sensitivity of a plasmonic sensor used to measure local changes in refractive index. We demonstrate a 56% quantum enhancement in the sensitivity of state-of-the-art plasmonic sensor with measured sensitivities on the order of $10^{-10}$RIU$/\sqrt{\textrm{Hz}}$, nearly 5 orders of magnitude better than previous proof-of-principle implementations of quantum-enhanced plasmonic sensors. These results promise significant enhancements in ultratrace label free plasmonic sensing and will find their way into areas ranging from biomedical applications to chemical detection.

arXiv:1802.00410•Optica•May 14, 2018•153 citations

Plasmonics and sensing beyond classical limits

Mark Tame, Changhyoup Lee

Optical sensors have applications in a range of settings, from measuring mechanical vibrations in manufacturing processes to biometrics in security devices and the detection of proteins and viruses in biomedical research. Many sensing approaches exist and plasmonic systems in particular have been studied extensively due to their ability to confine light below the diffraction limit, which greatly enhances their sensitivity compared to conventional approaches. Recently, various quantum techniques have been discovered that can outperform classical sensing ones and provide sensitivity beyond the shot-noise limit. The use of these quantum techniques in plasmonics for improving sensing performance is currently being explored. We study the performance of a plasmonic sensor that exploits the quantum nature of light and its highly confined field. We consider specialized quantum states and by comparison we show how each can provide improved sensitivity beyond the shot-noise limit.

Quantum Nanophotonic Materials, Devices, and Systems•Sep 3, 2019•10 citations

Quantum Plasmonic Sensing: Beyond the Shot-Noise and Diffraction Limit

Changhyoup Lee, Frederik Dieleman, Jinhyoung Lee +3 more

Photonic sensors have many applications in a range of physical settings, from measuring mechanical pressure in manufacturing to detecting protein concentration in biomedical samples. A variety of sensing approaches exist, and plasmonic systems in particular have received much attention due to their ability to confine light below the diffraction limit, greatly enhancing sensitivity. Recently, quantum techniques have been identified that can outperform classical sensing methods and achieve sensitivity below the so-called shot-noise limit. Despite this significant potential, the use of definite photon number states in lossy plasmonic systems for further improving sensing capabilities is not well studied. Here, we investigate the sensing performance of a plasmonic interferometer that simultaneously exploits the quantum nature of light and its electromagnetic field confinement. We show that, despite the presence of loss, specialized quantum resources can provide improved sensitivity and resolution beyond the shot-noise limit within a compact plasmonic device operating below the diffraction limit.

arXiv:1601.00173•ACS Photonics•May 16, 2016•73 citations

Sub-shot noise spatial correlations applied to imaging, metrology and sensing experiments

Ivano Ruo Berchera, Marco Genovese

Istituto Nazionale di Ricerca Metrologica (INRIM), Strada delle Cacce 91, 10135 Torino, Italy. E-mail:i.ruoberchera@inrim.it Quantum correlations of twin beams represent a resource of great importance for the developments of quantum technologies allowing unprecedented results in quantum information, metrology and quantum imaging. Focusing on the measurement of the photon numbers, spatial multimode correlations beyond the shot noise limit have been experimentally demonstrated by using parametric down conversion (PDC) and CCD camera (both at the single photon level and at higher photon flux) [1], and also with other interesting techniques [2]. One of their natural application is the quantum imaging of weak absorbing objects, showed in Fig.1, with sensitivity beyond the shot-noise-level [3]. The idea consists in measuring the intensity pattern on one branch of PDC, where the object has been inserted, and then subtracting the correlated noise pattern measured in the other branch that does not interact with the object. In our presentation we overview the sub-shot noise imaging protocol mentioned above and other applications where the spatial quantum correlation can give some advantages over the classical ones. As an example, we studied the signalto-noise ratio (SNR) of ghost imaging protocols with quantum and classical light [4]. We realized a ghost imaging experiment in the mesoscopic regime (one thousand of photon per pixel per shot), obtaining substantial quantum enhanced performances (see Fig.1). We also demonstrated that spatial quantum correlations provide the possibility for the absolute calibration of analog and/or photon number resolving detectors, providing the first absolute calibration (without any comparison with reference standards, neither optical source nor detector) of a scientific CCD camera [5]. In this first realization we already reached interesting uncertainty level. All these findings indicate that the control and detection of quantum spatial correlation is a rather mature field and other application to different sensing scenarios can be envisaged.

•Jan 1, 2012•1 citation
Quantum metrology takes advantage of quantum correlations to enhance the sensitivity of sensors and measurement techniques beyond their fundamental classical limit, given by the shot-noise limit. The use of both temporal and spatial correlations present in quantum states of light can extend quantum-enhanced sensing to a parallel configuration that can simultaneously probe an array of sensors or independently measure multiple parameters. To this end, we use multispatial-mode bright twin beams of light, which are characterized by independent quantum-correlated spatial subregions in addition to quantum temporal correlations, to probe a four-sensor quadrant plasmonic array. We show that it is possible to independently and simultaneously measure local changes in refractive index for all four sensors with a quantum enhancement in sensitivity in the range of 22% to 24% over the corresponding classical configuration. These results provide a first step toward highly parallel spatially resolved quantum-enhanced sensing techniques and pave the way toward more complex quantum sensing and quantum imaging platforms.
Quantum sensing is an emerging field of quantum optics that seeks to take advantage of quantum correlations available in quantum states of light to enable sensitivities beyond the fundamental classical limits. \nThe sensitivity of measurements and sensing apparatus when using classical states of light is limited to the shot-noise limit (SNL), which is achieved with coherent states of light. \n \nTwo-mode squeezed states of light (twin beams) have quantum correlations both in time and space, leading to temporal and spatial squeezing properties. \nSeveral applications can benefit from such noise reduction to enable new approaches, such as quantum-enhanced interferometry, quantum imaging, and quantum sensing. \nThe emergence of quantum technologies has been referred to as the second quantum revolution. \nFor metrology and sensing applications, in particular, it has led to new state-of-the-art sensitivity limits. \n \nIn this thesis, we discuss the implementation of quantum sensing based on squeezed states of light and plasmonic sensors as a platform for the demonstration of real-life quantum sensing. \nWe present a quantum-enhanced plasmonic sensing setup that can detect changes in the refractive index of air beyond the SNL. \nFurthermore, we generalize such experimental apparatus to probe an array of sensors using the quantum correlations present in different spatial locations to demonstrate a parallel quantum-enhanced plasmonic sensing scheme that can simultaneously detect changes in the refractive index of air in multiple locations with a single probing beam. \nThese results prove the applicability of twin beams for real-life applications based on plasmonic sensors. \nThe spatially resolved sensing scheme can be extended to pixel-size sensing of multiple sensors for multi-parameter estimation and detection applications to reach more complex sensing architectures.
Quantum resources can enhance the sensitivity of a device beyond the classical shot noise limit and, as a result, revolutionize the field of metrology through the development of quantum-enhanced sensors. In particular, plasmonic sensors, which are widely used in biological and chemical sensing applications, offer a unique opportunity to bring such an enhancement to real-life devices. Here, we use bright entangled twin beams to enhance the sensitivity of a plasmonic sensor used to measure local changes in refractive index. We demonstrate a 56% quantum enhancement in the sensitivity of state-of-the-art plasmonic sensor with measured sensitivities on the order of 10−1010^{-10}10−10RIU/Hz/\sqrt{\textrm{Hz}}/Hz​, nearly 5 orders of magnitude better than previous proof-of-principle implementations of quantum-enhanced plasmonic sensors. These results promise significant enhancements in ultratrace label free plasmonic sensing and will find their way into areas ranging from biomedical applications to chemical detection.
Optical sensors have applications in a range of settings, from measuring mechanical vibrations in manufacturing processes to biometrics in security devices and the detection of proteins and viruses in biomedical research. Many sensing approaches exist and plasmonic systems in particular have been studied extensively due to their ability to confine light below the diffraction limit, which greatly enhances their sensitivity compared to conventional approaches. Recently, various quantum techniques have been discovered that can outperform classical sensing ones and provide sensitivity beyond the shot-noise limit. The use of these quantum techniques in plasmonics for improving sensing performance is currently being explored. We study the performance of a plasmonic sensor that exploits the quantum nature of light and its highly confined field. We consider specialized quantum states and by comparison we show how each can provide improved sensitivity beyond the shot-noise limit.
Photonic sensors have many applications in a range of physical settings, from measuring mechanical pressure in manufacturing to detecting protein concentration in biomedical samples. A variety of sensing approaches exist, and plasmonic systems in particular have received much attention due to their ability to confine light below the diffraction limit, greatly enhancing sensitivity. Recently, quantum techniques have been identified that can outperform classical sensing methods and achieve sensitivity below the so-called shot-noise limit. Despite this significant potential, the use of definite photon number states in lossy plasmonic systems for further improving sensing capabilities is not well studied. Here, we investigate the sensing performance of a plasmonic interferometer that simultaneously exploits the quantum nature of light and its electromagnetic field confinement. We show that, despite the presence of loss, specialized quantum resources can provide improved sensitivity and resolution beyond the shot-noise limit within a compact plasmonic device operating below the diffraction limit.
Istituto Nazionale di Ricerca Metrologica (INRIM), Strada delle Cacce 91, 10135 Torino, Italy. E-mail:i.ruoberchera@inrim.it Quantum correlations of twin beams represent a resource of great importance for the developments of quantum technologies allowing unprecedented results in quantum information, metrology and quantum imaging. Focusing on the measurement of the photon numbers, spatial multimode correlations beyond the shot noise limit have been experimentally demonstrated by using parametric down conversion (PDC) and CCD camera (both at the single photon level and at higher photon flux) [1], and also with other interesting techniques [2]. One of their natural application is the quantum imaging of weak absorbing objects, showed in Fig.1, with sensitivity beyond the shot-noise-level [3]. The idea consists in measuring the intensity pattern on one branch of PDC, where the object has been inserted, and then subtracting the correlated noise pattern measured in the other branch that does not interact with the object. In our presentation we overview the sub-shot noise imaging protocol mentioned above and other applications where the spatial quantum correlation can give some advantages over the classical ones. As an example, we studied the signalto-noise ratio (SNR) of ghost imaging protocols with quantum and classical light [4]. We realized a ghost imaging experiment in the mesoscopic regime (one thousand of photon per pixel per shot), obtaining substantial quantum enhanced performances (see Fig.1). We also demonstrated that spatial quantum correlations provide the possibility for the absolute calibration of analog and/or photon number resolving detectors, providing the first absolute calibration (without any comparison with reference standards, neither optical source nor detector) of a scientific CCD camera [5]. In this first realization we already reached interesting uncertainty level. All these findings indicate that the control and detection of quantum spatial correlation is a rather mature field and other application to different sensing scenarios can be envisaged.