Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2310.18881 · Quantum

Efficient separate quantification of state preparation errors and measurement errors on quantum computers and their mitigation

Hongye Yu, Tzu-Chieh Wei

Published May 5, 2025• 12 citations
arXivHTMLPDF

Abstract

Current noisy quantum computers have multiple types of errors, which can occur in the state preparation, measurement/readout, and gate operation, as well as intrinsic decoherence and relaxation. Partly motivated by the booming of intermediate-scale quantum processors, measurement and gate errors have been recently extensively studied, and several methods of mitigating them have been proposed and formulated in software packages (e.g., in IBM Qiskit). Despite this, the state preparation error and the procedure to quantify it have not yet been standardized, as state preparation and measurement errors are usually considered not directly separable. Inspired by a recent work of Laflamme, Lin, and Mor \cite{laflamme2022algorithmic}, we propose a simple and resource-efficient approach to quantify separately the state preparation and readout error rates. With these two errors separately quantified, we also propose methods to mitigate them separately, especially mitigating state preparation errors with linear (with the number of qubits) complexity. As a result of the separate mitigation, we show that the fidelity of the outcome can be improved by an order of magnitude compared to the standard measurement error mitigation scheme. We also show that the quantification and mitigation scheme is resilient against gate noise and can be immediately applied to current noisy quantum computers. To demonstrate this, we present results from cloud experiments on IBM's superconducting quantum computers. The results indicate that the state preparation error rate is also an important metric for qubit metrology that can be efficiently obtained.

DOI
10.22331/q-2025-05-05-1724

Related papers

Error rate reduction of single-qubit gates via noise-aware decomposition into native gates

Thomas J. Maldonado, Johannes Flick, Stefan Krastanov +1 more

In the current era of Noisy Intermediate-Scale Quantum (NISQ) technology, the practical use of quantum computers remains inhibited by our inability to aptly decouple qubits from their environment to mitigate computational errors. In this paper, we introduce an approach by which knowledge of a qubit's initial quantum state and the standard parameters describing its decoherence can be leveraged to mitigate the noise present during the execution of a single-qubit gate. We benchmark our protocol using cloud-based access to IBM quantum processors. On ibmq_rome, we demonstrate a reduction of the single-qubit error rate by 38%, from [Formula: see text] to [Formula: see text], provided the initial state of the input qubit is known. On ibmq_bogota, we prove that our protocol will never decrease gate fidelity, provided the system's [Formula: see text] and [Formula: see text] times have not drifted above 100 times their assumed values. The protocol can be used to reduce quantum state preparation errors, as well as to improve the fidelity of quantum circuits for which some knowledge of the qubits' intermediate states can be inferred. This paper presents a pathway to using information about noise levels and quantum state distributions to significantly reduce error rates associated with quantum gates via optimized decomposition into native hardware gates.

arXiv:2104.07038•Scientific Reports•Apr 16, 2022•18 citations

Separate and efficient characterization of state-preparation and measurement errors using single-qubit operations

Muhammad Qasim Khan, Leigh Norris, Lorenza Viola

Abstract In many platforms, errors from state-preparation and measurement (SPAM) dominate over single-qubit gate errors. To inform further hardware improvements and the development of more effective SPAM mitigation strategies, it is necessary to separately characterize the error contributions from SP and measurement (M). Here, we show how to construct a protocol that can efficiently and separately characterize the SP and M error parameters by using only high-fidelity single-qubit gates and repeated single-qubit measurements without reset. The measurements are assumed to be non-destructive and M errors are taken to be (spatially and temporally) uncorrelated and classical. Notably, the circuit depth of the protocol is independent of system size, and the target parameters may be characterized to a precision that is only limited by the number of experimental repetitions. We employ our protocol for the parallel characterization of SPAM errors on multiple qubits in the IBM quantum platform devices, where we find SP infidelities up to 6.57% and readout assignment errors up to 19.1%. Using numerical simulations, we also demonstrate how measurement-error mitigation that does not properly account for SP errors generally leads to a biased estimate of measured observable expectation values.

arXiv:2509.19448•Quantum Science and Technology•Apr 28, 2026•4 citations

Quantum Errors Analysis of a Superconducting Quantum Processor

Jawwad Farooq, Ekram Khan

Quantum devices in the noisy intermediate-scale quantum (NISQ) era are highly susceptible to different types of quantum noise, which directly impact the reliability of experimental results. This work provides a characterization of error behavior arising from quantum noises on IBM's superconducting quantum processor, offering practical insights for algorithm design, benchmarking, and error-mitigation strategies on a real superconducting quantum processor in the NISQ era. The study begins with the measurement of the basis state, without applying any gate, to quantify state-preparation and measurement (SPAM) errors. Additionally, the errors are further quantified due to the application of single-qubit Pauli-X, two-qubit CNOT gate and other multi-qubit Controlled-X gates. Each circuit was executed with 1024 shots, and the percentage error between the expected and observed outputs was computed. The results show that the single-qubit Pauli-X gate exhibits relatively low errors in comparison with the two-qubit CNOT gate, whereas other multi-qubit Controlled-X gates lead to significantly higher deviations. This work also analyzes the noise effect of a fourqubit Controlled-X gate being implemented using a three-qubit Controlled-X gate with an extra auxiliary qubit, and the result shows a significant reduction in the error rate.

International Conference on Multimedia, Signal Processing and Communication Technologies (IMPACT)•Feb 14, 2026•0 citations

Readout Error Mitigation for Mid-Circuit Measurements and Feedforward

Jin Ming Koh, Dax Enshan Koh, Jayne Thompson

Current quantum computing platforms suffer from readout errors, where faulty measurement outcomes are reported by the device. These errors are particularly harmful in quantum programs that rely on branch statements, where operations in later parts of the program are dynamically determined by mid-circuit measurements. We propose a general protocol for mitigating mid-circuit measurement errors. Our solution works for any number of mid-circuit measurement and feedforward layers without increasing circuit depth or two-qubit gate counts, is efficient under structural assumptions on error channels, and is suitable for immediate application on noisy intermediate-scale quantum devices. We experimentally demonstrate up to a ∼ 60 % reduction in error on superconducting quantum processors across several practically relevant feedforward circuits, including dynamic qubit resets, shallow-depth Greenberger–Horne–Zeilinger state preparation, and multistage quantum teleportation. This work paves the way for more error-resilient adaptive quantum circuits, crucial for current and future quantum computing applications.

arXiv:2406.07611•PRX Quantum•Dec 10, 2025•26 citations

Resource-efficient Purification-based Quantum Error Mitigation

Zhenyu Cai

To achieve the practical applications of near-term noisy quantum devices, low-cost ways to mitigate the noise damages in the devices are essential. In many applications, the noiseless state we want to prepare is often a pure state, which has recently inspired a range of purification-based quantum error mitigation proposals. The existing proposals either are limited to the suppressions of only the leading-order state preparation errors, or require a large number of long-range gates that might be challenging to implement depending on the qubit architecture. This article will provide an overview of the different purification-based quantum error mitigation schemes and propose a resource-efficient scheme that can correct state preparation errors up to any order while requiring only half of the qubits and less than half of the long-range gates compared to before.

arXiv:2107.07279•Jul 15, 2021•36 citations

Mitigating measurement errors in multiqubit experiments

Sergey B. Bravyi, Sarah Sheldon, Abhinav Kandala +2 more

Reducing measurement errors in multiqubit quantum devices is critical for performing any quantum algorithm. Here we show how to mitigate measurement errors by a classical postprocessing of the measured outcomes. Our techniques apply to any experiment where measurement outcomes are used for computing expected values of observables. Two error-mitigation schemes are presented based on tensor product and correlated Markovian noise models. Error rates parametrizing these noise models can be extracted from the measurement calibration data using a simple formula. Error mitigation is achieved by applying the inverse noise matrix to a probability vector that represents the outcomes of a noisy measurement. The error-mitigation overhead, including the number of measurements and the cost of the classical postprocessing, is exponential in $\ensuremath{\epsilon}n$, where $\ensuremath{\epsilon}$ is the maximum error rate and $n$ is the number of qubits. We report experimental demonstration of our error-mitigation methods on IBM Quantum devices using stabilizer measurements for graph states with $n\ensuremath{\le}12$ qubits and entangled 20-qubit states generated by low-depth random Clifford circuits.

arXiv:2006.14044•Physical Review A•Apr 9, 2021•402 citations
Current noisy quantum computers have multiple types of errors, which can occur in the state preparation, measurement/readout, and gate operation, as well as intrinsic decoherence and relaxation. Partly motivated by the booming of intermediate-scale quantum processors, measurement and gate errors have been recently extensively studied, and several methods of mitigating them have been proposed and formulated in software packages (e.g., in IBM Qiskit). Despite this, the state preparation error and the procedure to quantify it have not yet been standardized, as state preparation and measurement errors are usually considered not directly separable. Inspired by a recent work of Laflamme, Lin, and Mor \cite{laflamme2022algorithmic}, we propose a simple and resource-efficient approach to quantify separately the state preparation and readout error rates. With these two errors separately quantified, we also propose methods to mitigate them separately, especially mitigating state preparation errors with linear (with the number of qubits) complexity. As a result of the separate mitigation, we show that the fidelity of the outcome can be improved by an order of magnitude compared to the standard measurement error mitigation scheme. We also show that the quantification and mitigation scheme is resilient against gate noise and can be immediately applied to current noisy quantum computers. To demonstrate this, we present results from cloud experiments on IBM's superconducting quantum computers. The results indicate that the state preparation error rate is also an important metric for qubit metrology that can be efficiently obtained.
In the current era of Noisy Intermediate-Scale Quantum (NISQ) technology, the practical use of quantum computers remains inhibited by our inability to aptly decouple qubits from their environment to mitigate computational errors. In this paper, we introduce an approach by which knowledge of a qubit's initial quantum state and the standard parameters describing its decoherence can be leveraged to mitigate the noise present during the execution of a single-qubit gate. We benchmark our protocol using cloud-based access to IBM quantum processors. On ibmq_rome, we demonstrate a reduction of the single-qubit error rate by 38%, from [Formula: see text] to [Formula: see text], provided the initial state of the input qubit is known. On ibmq_bogota, we prove that our protocol will never decrease gate fidelity, provided the system's [Formula: see text] and [Formula: see text] times have not drifted above 100 times their assumed values. The protocol can be used to reduce quantum state preparation errors, as well as to improve the fidelity of quantum circuits for which some knowledge of the qubits' intermediate states can be inferred. This paper presents a pathway to using information about noise levels and quantum state distributions to significantly reduce error rates associated with quantum gates via optimized decomposition into native hardware gates.
Abstract In many platforms, errors from state-preparation and measurement (SPAM) dominate over single-qubit gate errors. To inform further hardware improvements and the development of more effective SPAM mitigation strategies, it is necessary to separately characterize the error contributions from SP and measurement (M). Here, we show how to construct a protocol that can efficiently and separately characterize the SP and M error parameters by using only high-fidelity single-qubit gates and repeated single-qubit measurements without reset. The measurements are assumed to be non-destructive and M errors are taken to be (spatially and temporally) uncorrelated and classical. Notably, the circuit depth of the protocol is independent of system size, and the target parameters may be characterized to a precision that is only limited by the number of experimental repetitions. We employ our protocol for the parallel characterization of SPAM errors on multiple qubits in the IBM quantum platform devices, where we find SP infidelities up to 6.57% and readout assignment errors up to 19.1%. Using numerical simulations, we also demonstrate how measurement-error mitigation that does not properly account for SP errors generally leads to a biased estimate of measured observable expectation values.
Quantum devices in the noisy intermediate-scale quantum (NISQ) era are highly susceptible to different types of quantum noise, which directly impact the reliability of experimental results. This work provides a characterization of error behavior arising from quantum noises on IBM's superconducting quantum processor, offering practical insights for algorithm design, benchmarking, and error-mitigation strategies on a real superconducting quantum processor in the NISQ era. The study begins with the measurement of the basis state, without applying any gate, to quantify state-preparation and measurement (SPAM) errors. Additionally, the errors are further quantified due to the application of single-qubit Pauli-X, two-qubit CNOT gate and other multi-qubit Controlled-X gates. Each circuit was executed with 1024 shots, and the percentage error between the expected and observed outputs was computed. The results show that the single-qubit Pauli-X gate exhibits relatively low errors in comparison with the two-qubit CNOT gate, whereas other multi-qubit Controlled-X gates lead to significantly higher deviations. This work also analyzes the noise effect of a fourqubit Controlled-X gate being implemented using a three-qubit Controlled-X gate with an extra auxiliary qubit, and the result shows a significant reduction in the error rate.
Current quantum computing platforms suffer from readout errors, where faulty measurement outcomes are reported by the device. These errors are particularly harmful in quantum programs that rely on branch statements, where operations in later parts of the program are dynamically determined by mid-circuit measurements. We propose a general protocol for mitigating mid-circuit measurement errors. Our solution works for any number of mid-circuit measurement and feedforward layers without increasing circuit depth or two-qubit gate counts, is efficient under structural assumptions on error channels, and is suitable for immediate application on noisy intermediate-scale quantum devices. We experimentally demonstrate up to a ∼ 60 % reduction in error on superconducting quantum processors across several practically relevant feedforward circuits, including dynamic qubit resets, shallow-depth Greenberger–Horne–Zeilinger state preparation, and multistage quantum teleportation. This work paves the way for more error-resilient adaptive quantum circuits, crucial for current and future quantum computing applications.
To achieve the practical applications of near-term noisy quantum devices, low-cost ways to mitigate the noise damages in the devices are essential. In many applications, the noiseless state we want to prepare is often a pure state, which has recently inspired a range of purification-based quantum error mitigation proposals. The existing proposals either are limited to the suppressions of only the leading-order state preparation errors, or require a large number of long-range gates that might be challenging to implement depending on the qubit architecture. This article will provide an overview of the different purification-based quantum error mitigation schemes and propose a resource-efficient scheme that can correct state preparation errors up to any order while requiring only half of the qubits and less than half of the long-range gates compared to before.
Reducing measurement errors in multiqubit quantum devices is critical for performing any quantum algorithm. Here we show how to mitigate measurement errors by a classical postprocessing of the measured outcomes. Our techniques apply to any experiment where measurement outcomes are used for computing expected values of observables. Two error-mitigation schemes are presented based on tensor product and correlated Markovian noise models. Error rates parametrizing these noise models can be extracted from the measurement calibration data using a simple formula. Error mitigation is achieved by applying the inverse noise matrix to a probability vector that represents the outcomes of a noisy measurement. The error-mitigation overhead, including the number of measurements and the cost of the classical postprocessing, is exponential in $\ensuremath{\epsilon}n$, where $\ensuremath{\epsilon}$ is the maximum error rate and nnn is the number of qubits. We report experimental demonstration of our error-mitigation methods on IBM Quantum devices using stabilizer measurements for graph states with $n\ensuremath{\le}12$ qubits and entangled 20-qubit states generated by low-depth random Clifford circuits.