Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2310.07853

Adaptive Quantization for Key Generation in Low-Power Wide-Area Networks

Chen Chen, Junqing Zhang, Yingying Jennifer Chen

Published Oct 11, 2023• 5 citations
arXivHTMLPDF

Abstract

Physical layer key generation based on reciprocal and random wireless channels has been an attractive solution for securing resource-constrained low-power wide-area networks (LPWANs). When quantizing channel measurements, namely received signal strength indicator (RSSI), into key bits, the existing works mainly adopt fixed quantization levels and guard band parameters, which fail to fully extract keys from RSSI measurements. In this paper, we propose a novel adaptive quantization scheme for key generation in LPWANs, taking LoRa as a case study. The proposed adaptive quantization scheme can dynamically adjust the quantization parameters according to the randomness of RSSI measurements estimated by Lempel-Ziv complexity (LZ76), while ensuring a predefined key disagreement ratio (KDR). Specifically, our scheme uses pre-trained linear regression models to determine the appropriate quantization level and guard band parameter for each segment of RSSI measurements. Moreover, we propose a guard band parameter calibration scheme during information reconciliation during real-time key generation operation. Experimental evaluations using LoRa devices show that the proposed adaptive quantization scheme outperforms the benchmark differential quantization and fixed quantization with up to 2.35$\times$ and 1.51$\times$ key generation rate (KGR) gains, respectively.

DOI
10.48550/arxiv.2310.07853

Related papers

Distributed Physical Layer Key Generation for Secure LPWAN Communication

Biao Han, Sirui Peng, Xiaoyan Wang +1 more

Low-Power Wide Area Networks (LPWAN) has emerged as the dominant open specification in recent years due to its ability to offer affordable connectivity to the low-power devices distributed over large geographical areas. However, security issues have not been fully addressed in LPWAN specifications, especially, key distribution and key management. Physical layer key generation, which exploits wireless channel reciprocity and randomness to generate secure keys, has attracted considerable attention in recent years. In this paper, we exploit the physical layer key generation problem in LPWAN communication and present a distributed and lightweight key generation scheme for Long Range (LoRa) based network. It explores the shared randomness extracted from measured RSSI (Received Signal Strength Indicator) as consensus information to generate secure keys. To negotiate the RSSI signal as a bidirectional consistent key sequence, we propose a novel level-crossing quantization algorithm with an improved Cascade key agreement protocol to improve the key generation rate, as well as to avoid information leakage during transmission. We implement the proposed physical layer key generation scheme in a LoRa network prototype. Then we conduct extensive experiments in stationary and mobile indoor environments to evaluate the efficiency of the proposed key generation scheme. Experimental results show that its achievable key rate can reach 29.5% in stationary scenario and 35.5% in mobile scenario. Its key generation rate can exceed 1 bit/s with a lightweight implementation on the LoRa network prototype. For the 128-bit key sequence, it passes the the NIST suite of statistical tests.

IEEE International Conference on Parallel and Distributed Systems (ICPADS)•Dec 1, 2019•9 citations

Enhancing Key Generation Rate in LoRa-Based V2I Secret Key Generation Using Segment-Based Privacy Amplification

Muhammad Nizamudin Mahfud, Mike Yuliana, Weny Mistarika Rahmawati +2 more

Physical layer secret key generation (SKG) provides a promising solution for securing vehicle-toinfrastructure (V2I) communications by exploiting the inherent reciprocity of wireless channels. However, received signal strength indicator (RSSI) fluctuations, quantization mismatches, and constrained key generation rates present significant challenges in highly dynamic LoRa-based environments. This paper proposes an SKG framework that integrates Kalman filter, Guard Band Multibit Quantization (GBMQ), Cascade reconciliation, and SHA-1 based privacy amplification. Experimental evaluations were conducted across multiple urban V2I operational scenarios. The results demonstrate that the Kalman filter effectively enhances RSSI correlation, while the GBMQ scheme substantially minimizes the key disagreement rate (KDR) compared to the conventional Adaptive Multibit Quantization method. Furthermore, the remaining bit mismatches are completely eliminated via Cascade reconciliation, achieving a 0% KDR in all evaluated environments. Finally, the privacy amplification stage successfully generates secure cryptographic keys that exhibit robust randomness properties, confirming the efficacy of the proposed framework for resilient physical layer security in V2I networks.

International Electronics Symposium (IES)•Aug 1, 2026•0 citations

LoRa-LiSK: A Lightweight Shared Secret Key Generation Scheme for LoRa Networks

Aisha Kanwal Junejo, Fatma Benkhelifa, Boon Wong +1 more

Physical-layer security (PLS) schemes use the randomness of the channel parameters, namely, channel state information (CSI) and received signal strength indicator (RSSI) to generate the secret keys. There has been limited work in PLS schemes in long-range (LoRa) wide-area networks (LoRaWANs) which hinder their widespread application. Limitations observed in existing studies include the requirement of high correlation between channel parameter measurements for secret key generation in the proposed schemes and the evaluation of the schemes has only been done in either fully indoor or outdoor environments. The real-world wireless sensor networks (WSNs) and LoRa use cases might not meet both requirements thus making the current PLS schemes inappropriate for these systems. By considering the limitations found in existing PLS schemes, this article proposes LoRA-LiSK, a practical and efficient shared secret key generation scheme for LoRa networks. Our proposed LoRa-LiSK scheme consists of several preprocessing techniques (timestamp matching, two sample Kolmogorov–Smirnov tests, and a Savitzky–Golay filter), multilevel quantization, information reconciliation using Bose–Chaudhuri–Hocquenghem (BCH) codes, and finally, privacy amplification using secure hash algorithm SHA-2. The LoRa-LiSK scheme is extensively evaluated on real WSN/IoT devices in practical application scenarios: 1) indoor to outdoor and 2) LoRa static and mobile outdoor links. It outperforms existing schemes by generating keys with channel parameter measurements of low correlation values (0.2–0.6), while still essentially achieving high key generation rates, and low key disagreement rates (10%–20%). The scheme updates a key in approximately 1 h using an application profile with high transmission rate compared to 3 h reported by existing works while still respecting the duty cycle regulation. It also incurs less communication overhead compared to the existing works.

IEEE Internet of Things Journal•Aug 6, 2021•57 citations

Exploring the Feasibility of Physical Layer Key Generation for LoRaWAN

Weitao Xu, Sanjay Kumar Jha, Wen Song Hu

Physical layer key generation that exploits reciprocity and randomness of wireless fading channels has attracted considerable attention in recent years. Despite much research efforts in this field, the problem of wireless key generation at long distance and low data rate remains unknown and has not been studied. In this paper, we conduct extensive experiments and analysis in real indoor and outdoor environments to explore the feasibility of wireless key generation for Long Range Wide Area Network (LoRaWAN). Based on the results, we present LoRa-Key, the first complete key establishment protocol for LoRaWAN by exploring the shared randomness extracted from measured Received Signal Strength Indicator (RSSI). LoRa-Key employs a number of signal processing techniques to improve key generation rate significantly. Experimental results show that LoRa-Key can achieve key establishment rates of 13 bit/s in stationary scenario and 21 bit/s in mobile scenario. To the best of our knowledge, this is the first work that studies key generation protocol for LoRaWAN.

IEEE International Conference on Trust, Security and Privacy in Computing and Communications (TrustCom)•Aug 1, 2018•15 citations

Towards Wireless Secret key Agreement with LoRa Physical Layer

Henri Ruotsalainen, Stepan Grebeniuk

The wireless secret key agreement offers information theoretic secrecy with potential for low energy implementations. However, the presented works have concentrated mainly on wireless technologies such as 802.11 or 802.15.4, which are suitable for small scale local networks. This paper gives the first insights on how to establish LoRa based secret key agreement for low-power widea area networks (LPWAN). In particular: 1) characterization of LoRa parameter influence on the key agreement 2) comparison between available channel probing methods and 3) evaluation of several wireless scenarios with off-the-shelf LoRa devices, have been conducted to reveal the optimal hardware settings and the key generation performance. The main results indicate that the instantaneous RSSI measurement capability leads in most cases to lower key disagreement and higher key entropy. A further outcome shows that strong secret keys can be extracted from LoRa node-gateway communication, even when the devices are stationary.

International Conference on Availability, Reliability and Security (ARES)•Aug 13, 2018•19 citations

Physical Layer Key Generation from Wireless Channels with Non-ideal Channel Reciprocity: A Deep Learning Based Approach

Cheng Feng, Li Sun

Physical layer encryption is a promising solution to provide transmission security for Internet-of-Things (IoT). To realize physical layer encryption, channel state information (CSI) as a random source to generate secret keys should be exploited. The reciprocity of wireless channel between legitimate communication nodes which is typically assumed for time division duplex (TDD) systems, is of critical importance to ensure the consistency in generated keys at two nodes. However, in practical TDD systems, due to the asynchronous measurement of CSI, the receiver noise and the the difference in hardware, etc., the reciprocity of channel measurements between legitimate parties is hard to be guaranteed, which makes physical layer key generation approach infeasible. To address this issue, we propose a wireless key generation scheme based on deep learning techniques. Firstly, a feature extraction network, which consists of two auto-encoders trained jointly, is developed to extract the common feature from the different yet correlated channel observations at two legitimate nodes, which will be used as the source to generate keys. Then a quantizer with an adaptive guard band width is devised to output a binary secret-key sequence from the feature vector. Numerical results show that the proposed scheme achieves remarkable improvement in terms of key disagreement rate (KDR) and key generation rate (KGR) compared existing counterparts in the literature.

IEEE Vehicular Technology Conference•Jun 1, 2022•16 citations
Physical layer key generation based on reciprocal and random wireless channels has been an attractive solution for securing resource-constrained low-power wide-area networks (LPWANs). When quantizing channel measurements, namely received signal strength indicator (RSSI), into key bits, the existing works mainly adopt fixed quantization levels and guard band parameters, which fail to fully extract keys from RSSI measurements. In this paper, we propose a novel adaptive quantization scheme for key generation in LPWANs, taking LoRa as a case study. The proposed adaptive quantization scheme can dynamically adjust the quantization parameters according to the randomness of RSSI measurements estimated by Lempel-Ziv complexity (LZ76), while ensuring a predefined key disagreement ratio (KDR). Specifically, our scheme uses pre-trained linear regression models to determine the appropriate quantization level and guard band parameter for each segment of RSSI measurements. Moreover, we propose a guard band parameter calibration scheme during information reconciliation during real-time key generation operation. Experimental evaluations using LoRa devices show that the proposed adaptive quantization scheme outperforms the benchmark differential quantization and fixed quantization with up to 2.35×\times× and 1.51×\times× key generation rate (KGR) gains, respectively.
Low-Power Wide Area Networks (LPWAN) has emerged as the dominant open specification in recent years due to its ability to offer affordable connectivity to the low-power devices distributed over large geographical areas. However, security issues have not been fully addressed in LPWAN specifications, especially, key distribution and key management. Physical layer key generation, which exploits wireless channel reciprocity and randomness to generate secure keys, has attracted considerable attention in recent years. In this paper, we exploit the physical layer key generation problem in LPWAN communication and present a distributed and lightweight key generation scheme for Long Range (LoRa) based network. It explores the shared randomness extracted from measured RSSI (Received Signal Strength Indicator) as consensus information to generate secure keys. To negotiate the RSSI signal as a bidirectional consistent key sequence, we propose a novel level-crossing quantization algorithm with an improved Cascade key agreement protocol to improve the key generation rate, as well as to avoid information leakage during transmission. We implement the proposed physical layer key generation scheme in a LoRa network prototype. Then we conduct extensive experiments in stationary and mobile indoor environments to evaluate the efficiency of the proposed key generation scheme. Experimental results show that its achievable key rate can reach 29.5% in stationary scenario and 35.5% in mobile scenario. Its key generation rate can exceed 1 bit/s with a lightweight implementation on the LoRa network prototype. For the 128-bit key sequence, it passes the the NIST suite of statistical tests.
Physical layer secret key generation (SKG) provides a promising solution for securing vehicle-toinfrastructure (V2I) communications by exploiting the inherent reciprocity of wireless channels. However, received signal strength indicator (RSSI) fluctuations, quantization mismatches, and constrained key generation rates present significant challenges in highly dynamic LoRa-based environments. This paper proposes an SKG framework that integrates Kalman filter, Guard Band Multibit Quantization (GBMQ), Cascade reconciliation, and SHA-1 based privacy amplification. Experimental evaluations were conducted across multiple urban V2I operational scenarios. The results demonstrate that the Kalman filter effectively enhances RSSI correlation, while the GBMQ scheme substantially minimizes the key disagreement rate (KDR) compared to the conventional Adaptive Multibit Quantization method. Furthermore, the remaining bit mismatches are completely eliminated via Cascade reconciliation, achieving a 0% KDR in all evaluated environments. Finally, the privacy amplification stage successfully generates secure cryptographic keys that exhibit robust randomness properties, confirming the efficacy of the proposed framework for resilient physical layer security in V2I networks.
Physical-layer security (PLS) schemes use the randomness of the channel parameters, namely, channel state information (CSI) and received signal strength indicator (RSSI) to generate the secret keys. There has been limited work in PLS schemes in long-range (LoRa) wide-area networks (LoRaWANs) which hinder their widespread application. Limitations observed in existing studies include the requirement of high correlation between channel parameter measurements for secret key generation in the proposed schemes and the evaluation of the schemes has only been done in either fully indoor or outdoor environments. The real-world wireless sensor networks (WSNs) and LoRa use cases might not meet both requirements thus making the current PLS schemes inappropriate for these systems. By considering the limitations found in existing PLS schemes, this article proposes LoRA-LiSK, a practical and efficient shared secret key generation scheme for LoRa networks. Our proposed LoRa-LiSK scheme consists of several preprocessing techniques (timestamp matching, two sample Kolmogorov–Smirnov tests, and a Savitzky–Golay filter), multilevel quantization, information reconciliation using Bose–Chaudhuri–Hocquenghem (BCH) codes, and finally, privacy amplification using secure hash algorithm SHA-2. The LoRa-LiSK scheme is extensively evaluated on real WSN/IoT devices in practical application scenarios: 1) indoor to outdoor and 2) LoRa static and mobile outdoor links. It outperforms existing schemes by generating keys with channel parameter measurements of low correlation values (0.2–0.6), while still essentially achieving high key generation rates, and low key disagreement rates (10%–20%). The scheme updates a key in approximately 1 h using an application profile with high transmission rate compared to 3 h reported by existing works while still respecting the duty cycle regulation. It also incurs less communication overhead compared to the existing works.
Physical layer key generation that exploits reciprocity and randomness of wireless fading channels has attracted considerable attention in recent years. Despite much research efforts in this field, the problem of wireless key generation at long distance and low data rate remains unknown and has not been studied. In this paper, we conduct extensive experiments and analysis in real indoor and outdoor environments to explore the feasibility of wireless key generation for Long Range Wide Area Network (LoRaWAN). Based on the results, we present LoRa-Key, the first complete key establishment protocol for LoRaWAN by exploring the shared randomness extracted from measured Received Signal Strength Indicator (RSSI). LoRa-Key employs a number of signal processing techniques to improve key generation rate significantly. Experimental results show that LoRa-Key can achieve key establishment rates of 13 bit/s in stationary scenario and 21 bit/s in mobile scenario. To the best of our knowledge, this is the first work that studies key generation protocol for LoRaWAN.
The wireless secret key agreement offers information theoretic secrecy with potential for low energy implementations. However, the presented works have concentrated mainly on wireless technologies such as 802.11 or 802.15.4, which are suitable for small scale local networks. This paper gives the first insights on how to establish LoRa based secret key agreement for low-power widea area networks (LPWAN). In particular: 1) characterization of LoRa parameter influence on the key agreement 2) comparison between available channel probing methods and 3) evaluation of several wireless scenarios with off-the-shelf LoRa devices, have been conducted to reveal the optimal hardware settings and the key generation performance. The main results indicate that the instantaneous RSSI measurement capability leads in most cases to lower key disagreement and higher key entropy. A further outcome shows that strong secret keys can be extracted from LoRa node-gateway communication, even when the devices are stationary.
Physical layer encryption is a promising solution to provide transmission security for Internet-of-Things (IoT). To realize physical layer encryption, channel state information (CSI) as a random source to generate secret keys should be exploited. The reciprocity of wireless channel between legitimate communication nodes which is typically assumed for time division duplex (TDD) systems, is of critical importance to ensure the consistency in generated keys at two nodes. However, in practical TDD systems, due to the asynchronous measurement of CSI, the receiver noise and the the difference in hardware, etc., the reciprocity of channel measurements between legitimate parties is hard to be guaranteed, which makes physical layer key generation approach infeasible. To address this issue, we propose a wireless key generation scheme based on deep learning techniques. Firstly, a feature extraction network, which consists of two auto-encoders trained jointly, is developed to extract the common feature from the different yet correlated channel observations at two legitimate nodes, which will be used as the source to generate keys. Then a quantizer with an adaptive guard band width is devised to output a binary secret-key sequence from the feature vector. Numerical results show that the proposed scheme achieves remarkable improvement in terms of key disagreement rate (KDR) and key generation rate (KGR) compared existing counterparts in the literature.